thermal: core: Fix typo and indentation in comments

s/tmperature/temperature/ and adjust the indentation of the @ops parameter description to improve readability.

Signed-off-by Thorsten Blum <[email protected]>

---
 drivers/thermal/thermal_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/thermal/thermal_core.c +2 -3

index 90e7edf16a52..dc9f7416f7ff 100644
@@ -500,7 +500,7 @@ void thermal_zone_set_trip_hyst(struct thermal_zone_device *tz,
        WRITE_ONCE(trip->hysteresis, hyst);
        thermal_notify_tz_trip_change(tz, trip);
        /*
-        * If the zone temperature is above or at the trip tmperature, the trip
+        * If the zone temperature is above or at the trip temperature, the trip
         * is in the trips_reached list and its threshold is equal to its low
         * temperature.  It needs to stay in that list, but its threshold needs
         * to be updated and the list ordering may need to be restored.

@@ -1043,7 +1043,7 @@ static void thermal_cooling_device_init_complete(struct thermal_cooling_device *
  * @np:                a pointer to a device tree node.
  * @type:      the thermal cooling device type.
  * @devdata:   device private data.
- * @ops:               standard thermal cooling devices callbacks.
+ * @ops:       standard thermal cooling devices callbacks.
  *
  * This interface function adds a new thermal cooling device (fan/processor/...)
  * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
--

Thorsten Blum <[email protected]>
GPG: 1D60 735E 8AEF 3BE4 73B6 9D84 7336 78FD 8DFE EAD4