ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
PATCH 1/1 ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
When config table entries don't match with the device to be probed, currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller drivers should cover the devices generally, but in practice, this caused a problem as reported recently. Namely, when a specific kconfig for SOF isn't set for the modern Intel chips like Alderlake, a wrong driver (AVS) got probed and failed. This is because we have entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is set. If not set, there is no matching entry, hence it returns SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or SoundWire is found -- that was the working scenario. That being said, the current setup may be broken for modern Intel chips that are supposed to work with either SOF or legacy driver when the corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled, the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
--- sound/hda/core/intel-dsp-config.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/hda/core/intel-dsp-config.c +2 -1
@@ -718,7 +718,8 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci)/* find the configuration for the specific device */ cfg =snd_intel_dsp_find_config (pci, config_table,ARRAY_SIZE (config_table));if (!cfg) -return SND_INTEL_DSP_DRIVER_ANY ; +return IS_ENABLED (CONFIG_SND_HDA_INTEL ) ? +SND_INTEL_DSP_DRIVER_LEGACY :SND_INTEL_DSP_DRIVER_ANY ;if (cfg->flags &FLAG_SOF ) { if (cfg->flags & FLAG_SOF_ONLY_IF_SOUNDWIRE &&
Signature · 1 line
2.52.0
Quoted 29 lines · Takashi Iwai
When config table entries don't match with the device to be probed, currently we fall back to
SND_INTEL_DSP_DRIVER_ANY, which means to allow any drivers to bind with it.This was set so with the assumption (or hope) that all controller drivers should cover the devices generally, but in practice, this caused a problem as reported recently. Namely, when a specific kconfig for SOF isn't set for the modern Intel chips like Alderlake, a wrong driver (AVS) got probed and failed. This is because we have entries like:
#if
IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */(quoted diff) +0
-0{ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = PCI_DEVICE_ID_INTEL_HDA_ADL_S, }, #endifso this entry is effective only when
CONFIG_SND_SOC_SOF_ALDERLAKEis set. If not set, there is no matching entry, hence it returnsSND_INTEL_DSP_DRIVER_ANYas fallback. OTOH, if the kconfig is set, it explicitly falls back toSND_INTEL_DSP_DRIVER_LEGACYwhen no DMIC or SoundWire is found -- that was the working scenario. That being said, the current setup may be broken for modern Intel chips that are supposed to work with either SOF or legacy driver when the corresponding kconfig were missing.
Quoted 4 lines
For addressing the problem above, this patch changes the fallback driver to the legacy driver, i.e. return
SND_INTEL_DSP_DRIVER_LEGACYtype as much as possible. WhenCONFIG_SND_HDA_INTELis also disabled, the fallback is set toSND_INTEL_DSP_DRIVER_ANYtype, just to be sure.
Makes sense.
Quoted 4 lines
Reported-by Askar Safin <[email protected]>Tested-by Askar Safin <[email protected]>Signed-off-by Takashi Iwai <[email protected]>
Quoted 18 lines
--- sound/hda/core/intel-dsp-config.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)sound/hda/core/intel-dsp-config.c +2
-1@@ -718,7 +718,8 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci)/* find the configuration for the specific device */ cfg =snd_intel_dsp_find_config (pci, config_table,ARRAY_SIZE (config_table));if (!cfg) -return SND_INTEL_DSP_DRIVER_ANY ; +return IS_ENABLED (CONFIG_SND_HDA_INTEL ) ? +SND_INTEL_DSP_DRIVER_LEGACY :SND_INTEL_DSP_DRIVER_ANY ;if (cfg->flags &FLAG_SOF ) { if (cfg->flags & FLAG_SOF_ONLY_IF_SOUNDWIRE &&
Signature · 1 line
Péter