media: Add support for Johann's Receiver Board
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 media: Add support for Johann's Receiver Board
Hi,
this adds support for the open hardware DVB-S2 USB receiver board at
https://codeberg.org/jonnyh/jorebo
Regards,
Johann
Signed-off-by Johann Hanne <[email protected]>
---
MAINTAINERS +8 -0
@@ -28746,6 +28746,14 @@ Q: https://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/usb/dvb-usb-v2/zd1301* +JOREBO MEDIA DRIVER +M: Johann Hanne <[email protected]> +L: [email protected] +S: Maintained +W: https://codeberg.org/jonnyh/jorebo +Q: https://patchwork.linuxtv.org/project/linux-media/list/ +F: drivers/media/usb/dvb-usb-v2/jorebo.c + ZD1301_DEMOD MEDIA DRIVER L: [email protected] S: Orphan
drivers/media/usb/dvb-usb-v2/Kconfig +11 -0
@@ -175,4 +175,15 @@ help Say Y here to support the ZyDAS ZD1301 DVB USB receiver. +config DVB_USB_JOREBO + tristate "Johann's Receiver Board" + depends on DVB_USB_V2 + select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Johann's Receiver Board DVB-S2 USB receiver. + This board is open hardware with the CAD files available at + https://codeberg.org/jonnyh/jorebo. The firmware is open source and + available at https://codeberg.org/jonnyh/jorebo-firmware. + endif
drivers/media/usb/dvb-usb-v2/Makefile +3 -0
@@ -44,6 +44,9 @@ dvb-usb-zd1301-objs := zd1301.o obj-$(CONFIG_DVB_USB_ZD1301) += zd1301.o +dvb-usb-jorebo-objs := jorebo.o +obj-$(CONFIG_DVB_USB_JOREBO) += jorebo.o + ccflags-y += -I$(srctree)/drivers/media/dvb-frontends ccflags-y += -I$(srctree)/drivers/media/tuners ccflags-y += -I$(srctree)/drivers/media/common
drivers/media/usb/dvb-usb-v2/jorebo.c +369 -0
369 lines not on this page · raw message