Skip to contentSkip to conversation

rust: Upgrade 1.91.1 -> 1.92.0

PATCH In review [email protected] 3 participants 5 messages Dec 22, 2025 – Dec 24, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 rust: Upgrade 1.91.1 -> 1.92.0

From: Hemanth Kumar M D <[email protected]>

https://blog.rust-lang.org/2025/12/11/Rust-1.92.0/
Rust changes: https://github.com/rust-lang/rust/releases/tag/1.92.0
Cargo changes: https://doc.rust-lang.org/nightly/cargo/CHANGELOG.html#cargo-192-2025-12-11

Test results summary:

rust v1.92.0

+-----------+--------+---------+
| Machine   | Passed | Ignored |
+-----------+--------+---------+
| arm-32    | 30,317 |  1,687  |
| arm-64    | 30,426 |  1,617  |
| x86-32    | 30,335 |  1,664  |
| x86-64    | 30,587 |  1,414  |
| riscv-64  | 30,426 |  1,617  |
+-----------+--------+---------+

Test results difference (1.92.0-1.91.1):

+-----------+--------+---------+
| Machine   | Passed | Ignored |
+-----------+--------+---------+
| arm-32    |  +349  |  +177   |
| arm-64    |  +516  |  +170   |
| x86-32    |  +264  |  +217   |
| x86-64    |  +358  |  +167   |
| riscv-64  |  +281  |  +145   |
+-----------+--------+---------+

Note: The increase in ignored tests is not due to any additional ignores added in OE. These are primarily upstream-defined ignores introduced in Rust 1.92.0, likely due to architecture-specific constraints or target configuration differences. The only OE-side ignore added is for the no_std simple-runs test on 32-bit ARM, limited to a known upstream issue (rust-lang/rust#146996) and can be reverted once the issue is resolved.

---
 meta/conf/distro/include/tcmode-default.inc   |  2 +-
 .../rust/{cargo_1.91.1.bb => cargo_1.92.0.bb} |  0
 ...ibstd-rs_1.91.1.bb => libstd-rs_1.92.0.bb} |  0
 ....91.1.bb => rust-cross-canadian_1.92.0.bb} |  0
 meta/recipes-devtools/rust/rust-snapshot.inc  | 78 +++++++++----------
 meta/recipes-devtools/rust/rust-source.inc    |  2 +-
 .../rust/{rust_1.91.1.bb => rust_1.92.0.bb}   |  0
 7 files changed, 41 insertions(+), 41 deletions(-)
 rename meta/recipes-devtools/rust/{cargo_1.91.1.bb => cargo_1.92.0.bb} (100%)
 rename meta/recipes-devtools/rust/{libstd-rs_1.91.1.bb => libstd-rs_1.92.0.bb} (100%)
 rename meta/recipes-devtools/rust/{rust-cross-canadian_1.91.1.bb => rust-cross-canadian_1.92.0.bb} (100%)
 rename meta/recipes-devtools/rust/{rust_1.91.1.bb => rust_1.92.0.bb} (100%)
meta/conf/distro/include/tcmode-default.inc +1 -1
index 20acf3524f..c6e00dea5e 100644
@@ -12,7 +12,7 @@ PREFERRED_PROVIDER_virtual/gettext ??= "gettext"
 GCCVERSION ?= "15.%"
 SDKGCCVERSION ?= "${GCCVERSION}"
 GLIBCVERSION ?= "2.42%"
-RUSTVERSION ?= "1.91.1%"
+RUSTVERSION ?= "1.92.0%"
 
 PREFERRED_VERSION_gcc ?= "${GCCVERSION}"
 PREFERRED_VERSION_gcc-cross-${TARGET_ARCH} ?= "${GCCVERSION}"
meta/recipes-devtools/rust/cargo_1.92.0.bb renamed from meta/recipes-devtools/rust/cargo_1.91.1.bb +0 -0
similarity index 100%
rename from meta/recipes-devtools/rust/cargo_1.91.1.bb
rename to meta/recipes-devtools/rust/cargo_1.92.0.bb
meta/recipes-devtools/rust/libstd-rs_1.92.0.bb renamed from meta/recipes-devtools/rust/libstd-rs_1.91.1.bb +0 -0
similarity index 100%
rename from meta/recipes-devtools/rust/libstd-rs_1.91.1.bb
rename to meta/recipes-devtools/rust/libstd-rs_1.92.0.bb
meta/recipes-devtools/rust/rust-cross-canadian_1.92.0.bb renamed from meta/recipes-devtools/rust/rust-cross-canadian_1.91.1.bb +0 -0
similarity index 100%
rename from meta/recipes-devtools/rust/rust-cross-canadian_1.91.1.bb
rename to meta/recipes-devtools/rust/rust-cross-canadian_1.92.0.bb
meta/recipes-devtools/rust/rust-snapshot.inc +39 -39

95 lines not on this page · raw message

meta/recipes-devtools/rust/rust-source.inc +1 -1
index f714487428..d7d44510e4 100644
@@ -9,7 +9,7 @@ SRC_URI += "https://static.rust-lang.org/dist/rustc-${RUST_VERSION}-src.tar.xz;n
             file://revert-link-std-statically-in-rustc_driver-feature.patch;patchdir=${RUSTSRC} \
             file://0001-riscv32-Define-plain-syscalls-as-their-time64-varian.patch;patchdir=${RUSTSRC} \
 "
-SRC_URI[rust.sha256sum] = "66401bb815e236cc6b2aacbbe23b61b286c1fe27a67902e7c0222cfe77b3dbab"
+SRC_URI[rust.sha256sum] = "ebee170bfe4c4dfc59521a101de651e5534f4dae889756a5c97ca9ea40d0c307"
 
 RUSTSRC = "${UNPACKDIR}/rustc-${RUST_VERSION}-src"
 
meta/recipes-devtools/rust/rust_1.92.0.bb renamed from meta/recipes-devtools/rust/rust_1.91.1.bb +0 -0
similarity index 100%
rename from meta/recipes-devtools/rust/rust_1.91.1.bb
rename to meta/recipes-devtools/rust/rust_1.92.0.bb
Signature · 1 line
2.49.0
#1 lore raw

PATCH 2/2 rust: enable default uwtable and ignore arm no_std test

From: Hemanth Kumar M D <[email protected]>

Rust 1.92.0 adds new test that require unwind table support to be enabled by default. Set default-uwtable = true in the generated target spec to match upstream behavior.

ref:https://github.com/rust-lang/rust/commit/fe66eaa67acc47525db6f13cf97d54780d87b805

Also ignore the no_std simple-runs UI test on ARM targets. The test fails with panic=abort due to a known unwind table issue on 32-bit ARM

https://github.com/rust-lang/rust/issues/146996

---
 meta/classes-recipe/rust-target-config.bbclass       |  1 +
 .../rust/files/rust-oe-selftest.patch                | 12 ++++++++++++
 2 files changed, 13 insertions(+)
meta/classes-recipe/rust-target-config.bbclass +1 -0
index 33a290412e..2a06c4ae8b 100644
@@ -418,6 +418,7 @@ def rust_gen_target(d, thing, wd, arch):
         tspec['llvm-floatabi'] = "soft"
     elif fpu == "hard":
         tspec['llvm-floatabi'] = "hard"
+    tspec['default-uwtable'] = True
     tspec['dynamic-linking'] = True
     tspec['executables'] = True
     tspec['linker-is-gnu'] = True
meta/recipes-devtools/rust/files/rust-oe-selftest.patch +12 -0
index b39b326455..d1fba81612 100644
@@ -254,3 +254,15 @@ index a3562f2fd93..d4e52ed91be 100644
      fn linux_hwcap2_aarch64() {
          let file =
              concat!(env!("CARGO_MANIFEST_DIR"), "/src/detect/test_data/linux-hwcap2-aarch64.auxv");
+diff --git a/tests/ui/no_std/simple-runs.rs b/tests/ui/no_std/simple-runs.rs
+index af44dfe..e6674e5 100644
+--- a/tests/ui/no_std/simple-runs.rs
++++ b/tests/ui/no_std/simple-runs.rs
+@@ -2,6 +2,7 @@
+ 
+ //@ run-pass
+ //@ compile-flags: -Cpanic=abort
++//@ ignore-arm FIXME(#146996)
+ //@ ignore-wasm different `main` convention
+ 
+ #![feature(lang_items)]
Signature · 1 line
2.49.0
#2 lore raw

Re: [PATCH 2/2] rust: enable default uwtable and ignore arm no_std test

Quoted 6 lines · On 2025-12-22 4:38 a.m., [email protected] wrote:

From: Hemanth Kumar M D<[email protected]>

Rust 1.92.0 adds new test that require unwind table support to be enabled by default. Set default-uwtable = true in the generated target spec to match upstream behavior.

Quoted 6 lines

ref:https://github.com/rust-lang/rust/commit/fe66eaa67acc47525db6f13cf97d54780d87b805

Also ignore the no_std simple-runs UI test on ARM targets. The test fails with panic=abort due to a known unwind table issue on 32-bit ARM

https://github.com/rust-lang/rust/issues/146996

Okay and I'm glad to see the upstream issues linked.

Should we make some of these tspec decisions set-able by well-informed users?

Maybe they can already do that using this horridly named "FEATURES" variable. (rename to RUST_FEATURES maybe ?)

For example, this bug:

Unable to produce a Rust static binary with TCLIBC=musl (oe-core/master)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=16076

seems to be due to hard-coding dynamic-linking to True below just after your:

+ tspec['default-uwtable'] = True

change.

I've CCed Nick in case you guys have a quick work-around to enable static linking.

../Randy

Quoted 40 lines
---
  meta/classes-recipe/rust-target-config.bbclass       |  1 +
  .../rust/files/rust-oe-selftest.patch                | 12 ++++++++++++
  2 files changed, 13 insertions(+)
meta/classes-recipe/rust-target-config.bbclass +1 -0
index 33a290412e..2a06c4ae8b 100644
@@ -418,6 +418,7 @@ def rust_gen_target(d, thing, wd, arch):
          tspec['llvm-floatabi'] = "soft"
      elif fpu == "hard":
          tspec['llvm-floatabi'] = "hard"
+    tspec['default-uwtable'] = True
      tspec['dynamic-linking'] = True
      tspec['executables'] = True
      tspec['linker-is-gnu'] = True
meta/recipes-devtools/rust/files/rust-oe-selftest.patch +12 -0
index b39b326455..d1fba81612 100644
@@ -254,3 +254,15 @@ index a3562f2fd93..d4e52ed91be 100644
       fn linux_hwcap2_aarch64() {
           let file =
               concat!(env!("CARGO_MANIFEST_DIR"), "/src/detect/test_data/linux-hwcap2-aarch64.auxv");
+diff --git a/tests/ui/no_std/simple-runs.rs b/tests/ui/no_std/simple-runs.rs
+index af44dfe..e6674e5 100644
+--- a/tests/ui/no_std/simple-runs.rs
++++ b/tests/ui/no_std/simple-runs.rs
+@@ -2,6 +2,7 @@
+
+ //@ run-pass
+ //@ compile-flags: -Cpanic=abort
++//@ ignore-arm FIXME(#146996)
+ //@ ignore-wasm different `main` convention
+
+ #![feature(lang_items)]
Signature · 2 lines
# Randy MacLeod
# Wind River Linux
#3 lore raw

Re: [PATCH 2/2] rust: enable default uwtable and ignore arm no_std test

Quoted 12 lines · Randy MacLeod
Quoted 11 lines · On 2025-12-22 4:38 a.m., [email protected] wrote:

From: Hemanth Kumar M D<[email protected]>

Rust 1.92.0 adds new test that require unwind table support to be enabled by default. Set default-uwtable = true in the generated target spec to match upstream behavior.

ref:https://github.com/rust-lang/rust/commit/fe66eaa67acc47525db6f13cf97d54780d87b805

Also ignore the no_std simple-runs UI test on ARM targets. The test fails with panic=abort due to a known unwind table issue on 32-bit ARM

Quoted 9 lines
Quoted 1 line

https://github.com/rust-lang/rust/issues/146996

Okay and I'm glad to see the upstream issues linked.

Should we make some of these tspec decisions set-able by well-informed users?

Maybe they can already do that using this horridly named "FEATURES" variable. (rename to RUST_FEATURES maybe ?)

Most of the tspec features are set explicitly here.
We are analyzing on the possibility to check and set them using FEATURES to make user-configurable.

Regards,
Yash

Quoted 61 lines

For example, this bug:

Unable to produce a Rust static binary with TCLIBC=musl (oe-core/master)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=16076

seems to be due to hard-coding dynamic-linking to True below just after your:

+ tspec['default-uwtable'] = True

change.

I've CCed Nick in case you guys have a quick work-around to enable static linking.

../Randy

Quoted 39 lines
---
  meta/classes-recipe/rust-target-config.bbclass       |  1 +
  .../rust/files/rust-oe-selftest.patch                | 12 ++++++++++++
  2 files changed, 13 insertions(+)
meta/classes-recipe/rust-target-config.bbclass +1 -0
index 33a290412e..2a06c4ae8b 100644
@@ -418,6 +418,7 @@ def rust_gen_target(d, thing, wd, arch):
          tspec['llvm-floatabi'] = "soft"
      elif fpu == "hard":
          tspec['llvm-floatabi'] = "hard"
+    tspec['default-uwtable'] = True
      tspec['dynamic-linking'] = True
      tspec['executables'] = True
      tspec['linker-is-gnu'] = True
meta/recipes-devtools/rust/files/rust-oe-selftest.patch +12 -0
index b39b326455..d1fba81612 100644
@@ -254,3 +254,15 @@ index a3562f2fd93..d4e52ed91be 100644
       fn linux_hwcap2_aarch64() {
           let file =
               concat!(env!("CARGO_MANIFEST_DIR"), "/src/detect/test_data/linux-hwcap2-aarch64.auxv");
+diff --git a/tests/ui/no_std/simple-runs.rs b/tests/ui/no_std/simple-runs.rs
+index af44dfe..e6674e5 100644
+--- a/tests/ui/no_std/simple-runs.rs
++++ b/tests/ui/no_std/simple-runs.rs
+@@ -2,6 +2,7 @@
+
+ //@ run-pass
+ //@ compile-flags: -Cpanic=abort
++//@ ignore-arm FIXME(#146996)
+ //@ ignore-wasm different `main` convention
+
+ #![feature(lang_items)]
Signature · 2 lines
# Randy MacLeod
# Wind River Linux
Signature · 2 lines
Regards,
Yash Shinde
#4 lore raw

Re: [PATCH 2/2] rust: enable default uwtable and ignore arm no_std test

In reply to Randy MacLeod

Hi Randy,

Quoted 12 lines · Randy MacLeod
Quoted 11 lines · On 2025-12-22 4:38 a.m., [email protected] wrote:

From: Hemanth Kumar M D<[email protected]>

Rust 1.92.0 adds new test that require unwind table support to be enabled by default. Set default-uwtable = true in the generated target spec to match upstream behavior.

ref:https://github.com/rust-lang/rust/commit/fe66eaa67acc47525db6f13cf97d54780d87b805

Also ignore the no_std simple-runs UI test on ARM targets. The test fails with panic=abort due to a known unwind table issue on 32-bit ARM

Quoted 9 lines
Quoted 1 line

https://github.com/rust-lang/rust/issues/146996

Okay and I'm glad to see the upstream issues linked.

Should we make some of these tspec decisions set-able by well-informed users?

Maybe they can already do that using this horridly named "FEATURES" variable. (rename to RUST_FEATURES maybe ?)

The existing FEATURES variables in the .bbclass is currently used for low-level CPU instructions. As you suggested, RUST_FEATURE variable will allow us to keep H/W tuning separate from high-level compiler policy. I will discuss with team.

Quoted 7 lines

For example, this bug:

Unable to produce a Rust static binary with TCLIBC=musl (oe-core/master)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=16076

Although the bug report did not include a specific recipe, I used ripgrep as a reference to validate the issue and was able to build a fully static musl binary.

I found that changing *tspec['dynamic-linking']* from *true *to *false *in the .bbclass alone was not enough to produce static binary. The problem had two parts.

First, at the target specification level, rust-target-config.bbclass forces dynamic-linking to true. Because of this, the compiler assumes the target is dynamic and ignores requests for static linking. As a result, it still produces a dynamic PIE binary that depends on the musl dynamic loader (ld-musl.so).

Second, at the linker wrapper level, *target-rust-ccld* enforces dynamic linking by default. It automatically adds flags such as*-Wl,-Bdynamic* and *-pie*. This conflicts with the compiler’s static intent and causes it to pick shared libraries from the sysroot, which leads to the error
“*attempted static linking of dynamic object*”.

To work around this and meet static musl requirements, I applied recipe-specific changes to bypass the wrapper’s enforcement and handle circular dependencies and crate-level leakage.
With these adjustments, the final link correctly uses static archives instead of falling back to shared objects.

I will update the bug report with these findings.

Quoted 57 lines

seems to be due to hard-coding dynamic-linking to True below just after your:

+ tspec['default-uwtable'] = True

change.

I've CCed Nick in case you guys have a quick work-around to enable static linking.

../Randy

Quoted 39 lines
---
  meta/classes-recipe/rust-target-config.bbclass       |  1 +
  .../rust/files/rust-oe-selftest.patch                | 12 ++++++++++++
  2 files changed, 13 insertions(+)
meta/classes-recipe/rust-target-config.bbclass +1 -0
index 33a290412e..2a06c4ae8b 100644
@@ -418,6 +418,7 @@ def rust_gen_target(d, thing, wd, arch):
          tspec['llvm-floatabi'] = "soft"
      elif fpu == "hard":
          tspec['llvm-floatabi'] = "hard"
+    tspec['default-uwtable'] = True
      tspec['dynamic-linking'] = True
      tspec['executables'] = True
      tspec['linker-is-gnu'] = True
meta/recipes-devtools/rust/files/rust-oe-selftest.patch +12 -0
index b39b326455..d1fba81612 100644
@@ -254,3 +254,15 @@ index a3562f2fd93..d4e52ed91be 100644
       fn linux_hwcap2_aarch64() {
           let file =
               concat!(env!("CARGO_MANIFEST_DIR"), "/src/detect/test_data/linux-hwcap2-aarch64.auxv");
+diff --git a/tests/ui/no_std/simple-runs.rs b/tests/ui/no_std/simple-runs.rs
+index af44dfe..e6674e5 100644
+--- a/tests/ui/no_std/simple-runs.rs
++++ b/tests/ui/no_std/simple-runs.rs
+@@ -2,6 +2,7 @@
+
+ //@ run-pass
+ //@ compile-flags: -Cpanic=abort
++//@ ignore-arm FIXME(#146996)
+ //@ ignore-wasm different `main` convention
+
+ #![feature(lang_items)]
Signature · 2 lines
# Randy MacLeod
# Wind River Linux