Skip to contentSkip to conversation

Add DRM property for panel type

PATCH In review Mario Limonciello (AMD) 3 participants 6 messages Jan 6 – Jan 9

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Add DRM property for panel type

OLED panels consume a lot less power with darker content. However userspace doesn't currently know what kind of panel technology is used to decide what kind of image to show.

This series introduces a DRM property for the panel type. Initially the values are "Unknown" and "OLED" leaving room for expansion later for other display technologies like MiniLED or LCD if they are sensible to detect and advertise as well.

A userspace implementation utilizing the new property to decide the theme of GNOME is available here:

Mario Limonciello (AMD) (2):
drm/connector: Add a new 'panel_type' property drm/amd/display: Attach OLED property to eDP panels

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  7 ++++
 drivers/gpu/drm/drm_connector.c               | 33 +++++++++++++++++++
 include/drm/drm_connector.h                   |  1 +
 include/drm/drm_mode_config.h                 |  4 +++
 include/uapi/drm/drm_mode.h                   |  4 +++
 5 files changed, 49 insertions(+)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/2 drm/connector: Add a new 'panel_type' property

If the driver can make an assertion whether a connected panel is an OLED panel or not then it can attach a property to the connector that userspace can use as a hint for color schemes.

---
 drivers/gpu/drm/drm_connector.c | 33 +++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     |  1 +
 include/drm/drm_mode_config.h   |  4 ++++
 include/uapi/drm/drm_mode.h     |  4 ++++
 4 files changed, 42 insertions(+)
drivers/gpu/drm/drm_connector.c +33 -0
index 4d6dc9ebfdb5b..7d5279c366583 100644
@@ -1167,6 +1167,11 @@ static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
 	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
 };
 
+static const struct drm_prop_enum_list drm_panel_type_enum_list[] = {
+	{ DRM_MODE_PANEL_TYPE_UNKNOWN, "unknown" },
+	{ DRM_MODE_PANEL_TYPE_OLED, "OLED" },
+};
+
 /**
  * drm_display_info_set_bus_formats - set the supported bus formats
  * @info: display info to store bus formats in
@@ -1495,6 +1500,9 @@ EXPORT_SYMBOL(drm_hdmi_connector_get_output_format_name);
  * 	Summarizing: Only set "DPMS" when the connector is known to be enabled,
  * 	assume that a successful SETCONFIG call also sets "DPMS" to on, and
  * 	never read back the value of "DPMS" because it can be incorrect.
+ * panel_type:
+ * 	Immutable enum property to indicate the type of connected panel.
+ * 	Possible values are "unknown" (default) and "OLED".
  * PATH:
  * 	Connector path property to identify how this sink is physically
  * 	connected. Used by DP MST. This should be set by calling
@@ -1845,6 +1853,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.link_status_property = prop;
 
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, "panel_type",
+					drm_panel_type_enum_list,
+					ARRAY_SIZE(drm_panel_type_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.panel_type_property = prop;
+
 	prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop");
 	if (!prop)
 		return -ENOMEM;
@@ -3620,3 +3635,21 @@ struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
 	return tg;
 }
 EXPORT_SYMBOL(drm_mode_create_tile_group);
+
+/**
+ * drm_connector_attach_panel_type_property - attaches panel type property
+ * @connector: connector to attach the property on.
+ *
+ * This is used to add support for panel type detection.
+ */
+void drm_connector_attach_panel_type_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop = dev->mode_config.panel_type_property;
+
+	if (!prop)
+		return;
+
+	drm_object_attach_property(&connector->base, prop, DRM_MODE_PANEL_TYPE_UNKNOWN);
+}
+EXPORT_SYMBOL(drm_connector_attach_panel_type_property);
include/drm/drm_connector.h +1 -0
index 8f34f4b8183d8..bd460a6d0d052 100644
@@ -2448,6 +2448,7 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
 					       u32 scaling_mode_mask);
 int drm_connector_attach_vrr_capable_property(
 		struct drm_connector *connector);
+void drm_connector_attach_panel_type_property(struct drm_connector *connector);
 int drm_connector_attach_broadcast_rgb_property(struct drm_connector *connector);
 int drm_connector_attach_colorspace_property(struct drm_connector *connector);
 int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector);
include/drm/drm_mode_config.h +4 -0
index 895fb820dba07..5e1dd0cfccde2 100644
@@ -600,6 +600,10 @@ struct drm_mode_config {
 	 * multiple CRTCs.
 	 */
 	struct drm_property *tile_property;
+	/**
+	 * @panel_type_property: Default connector property for panel type
+	 */
+	struct drm_property *panel_type_property;
 	/**
 	 * @link_status_property: Default connector property for link status
 	 * of a connector
include/uapi/drm/drm_mode.h +4 -0
index cbbbfc1dfe2b8..3693d82b5279f 100644
@@ -166,6 +166,10 @@ extern "C" {
 #define DRM_MODE_LINK_STATUS_GOOD	0
 #define DRM_MODE_LINK_STATUS_BAD	1
 
+/* Panel type property */
+#define DRM_MODE_PANEL_TYPE_UNKNOWN	0
+#define DRM_MODE_PANEL_TYPE_OLED	1
+
 /*
  * DRM_MODE_ROTATE_<degrees>
  *
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/2 drm/amd/display: Attach OLED property to eDP panels

In reply to Mario Limonciello (AMD)

amdgpu verifies that a given panel is an OLED panel from extended caps and can provide accurate information to userspace. Attach a property to the DRM connector.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +7 -0
index 35dbc6aba4dfc..1cac5ebf50a9d 100644
@@ -91,6 +91,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_eld.h>
+#include <drm/drm_mode.h>
 #include <drm/drm_utils.h>
 #include <drm/drm_vblank.h>
 #include <drm/drm_audio_component.h>
@@ -3739,6 +3740,10 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
 	caps->aux_support = false;
 
+	drm_object_property_set_value(&conn_base->base,
+				      adev_to_drm(adev)->mode_config.panel_type_property,
+				      caps->ext_caps->bits.oled ? DRM_MODE_PANEL_TYPE_OLED : DRM_MODE_PANEL_TYPE_UNKNOWN);
+
 	if (caps->ext_caps->bits.oled == 1
 	    /*
 	     * ||
@@ -9020,6 +9025,8 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 	if (connector_type == DRM_MODE_CONNECTOR_eDP) {
 		struct drm_privacy_screen *privacy_screen;
 
+		drm_connector_attach_panel_type_property(&aconnector->base);
+
 		privacy_screen = drm_privacy_screen_get(adev_to_drm(adev)->dev, NULL);
 		if (!IS_ERR(privacy_screen)) {
 			drm_connector_attach_privacy_screen_provider(&aconnector->base,
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 2/2
#3 lore raw

Re: [PATCH 2/2] drm/amd/display: Attach OLED property to eDP panels

Quoted 22 lines · Mario Limonciello (AMD)

amdgpu verifies that a given panel is an OLED panel from extended caps and can provide accurate information to userspace. Attach a property to the DRM connector.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -0
index 35dbc6aba4dfc..1cac5ebf50a9d 100644
@@ -91,6 +91,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_eld.h>
+#include <drm/drm_mode.h>
 #include <drm/drm_utils.h>
 #include <drm/drm_vblank.h>
 #include <drm/drm_audio_component.h>

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) · line 3746

Quoted 7 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
@@ -3739,6 +3740,10 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
 	caps->aux_support = false;
 
+	drm_object_property_set_value(&conn_base->base,
+				      adev_to_drm(adev)->mode_config.panel_type_property,
+				      caps->ext_caps->bits.oled ? DRM_MODE_PANEL_TYPE_OLED : DRM_MODE_PANEL_TYPE_UNKNOWN);
+

I think we'll want to pull this out into something like dm_set_panel_type(), called after update_connector_ext_caps() and any additional bits of edid parsing needed to make panel_type detection more robust. I suppose that can be a future task.

Series is

Thanks,
Leo

Quoted 12 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +2 -0
 	if (caps->ext_caps->bits.oled == 1
 	    /*
 	     * ||
@@ -9020,6 +9025,8 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 	if (connector_type == DRM_MODE_CONNECTOR_eDP) {
 		struct drm_privacy_screen *privacy_screen;
 
+		drm_connector_attach_panel_type_property(&aconnector->base);
+
 		privacy_screen = drm_privacy_screen_get(adev_to_drm(adev)->dev, NULL);
 		if (!IS_ERR(privacy_screen)) {
 			drm_connector_attach_privacy_screen_provider(&aconnector->base,
#4 lore raw

Re: [PATCH 2/2] drm/amd/display: Attach OLED property to eDP panels

Quoted 26 lines · Leo Li
Quoted 25 lines · Mario Limonciello (AMD)

amdgpu verifies that a given panel is an OLED panel from extended caps and can provide accurate information to userspace. Attach a property to the DRM connector.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -0
index 35dbc6aba4dfc..1cac5ebf50a9d 100644
@@ -91,6 +91,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_eld.h>
+#include <drm/drm_mode.h>
 #include <drm/drm_utils.h>
 #include <drm/drm_vblank.h>
 #include <drm/drm_audio_component.h>
@@ -3739,6 +3740,10 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
 	caps->aux_support = false;
 
Quoted 9 lines

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) · line 3746

Quoted 4 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
+	drm_object_property_set_value(&conn_base->base,
+				      adev_to_drm(adev)->mode_config.panel_type_property,
+				      caps->ext_caps->bits.oled ? DRM_MODE_PANEL_TYPE_OLED : DRM_MODE_PANEL_TYPE_UNKNOWN);
+

I think we'll want to pull this out into something like dm_set_panel_type(), called after update_connector_ext_caps() and any additional bits of edid parsing needed to make panel_type detection more robust. I suppose that can be a future task.

I really wish you moved *all* EDID parsing to drm_edid.c instead of having your own.

BR,
Jani.

Quoted 20 lines

Series is

Thanks,
Leo

Quoted 12 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +2 -0
 	if (caps->ext_caps->bits.oled == 1
 	    /*
 	     * ||
@@ -9020,6 +9025,8 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 	if (connector_type == DRM_MODE_CONNECTOR_eDP) {
 		struct drm_privacy_screen *privacy_screen;
 
+		drm_connector_attach_panel_type_property(&aconnector->base);
+
 		privacy_screen = drm_privacy_screen_get(adev_to_drm(adev)->dev, NULL);
 		if (!IS_ERR(privacy_screen)) {
 			drm_connector_attach_privacy_screen_provider(&aconnector->base,
Signature · 1 line
Jani Nikula, Intel
maintainer
#5 lore raw

Re: [PATCH 2/2] drm/amd/display: Attach OLED property to eDP panels

Quoted 37 lines · Jani Nikula
Quoted 26 lines · Leo Li
Quoted 25 lines · Mario Limonciello (AMD)

amdgpu verifies that a given panel is an OLED panel from extended caps and can provide accurate information to userspace. Attach a property to the DRM connector.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -0
index 35dbc6aba4dfc..1cac5ebf50a9d 100644
@@ -91,6 +91,7 @@
 #include <drm/drm_fourcc.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_eld.h>
+#include <drm/drm_mode.h>
 #include <drm/drm_utils.h>
 #include <drm/drm_vblank.h>
 #include <drm/drm_audio_component.h>
@@ -3739,6 +3740,10 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
 	caps->aux_support = false;
 
Quoted 9 lines

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) · line 3746

Quoted 4 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
+	drm_object_property_set_value(&conn_base->base,
+				      adev_to_drm(adev)->mode_config.panel_type_property,
+				      caps->ext_caps->bits.oled ? DRM_MODE_PANEL_TYPE_OLED : DRM_MODE_PANEL_TYPE_UNKNOWN);
+

I think we'll want to pull this out into something like dm_set_panel_type(), called after update_connector_ext_caps() and any additional bits of edid parsing needed to make panel_type detection more robust. I suppose that can be a future task.

Quoted 2 lines

I really wish you moved *all* EDID parsing to drm_edid.c instead of having your own.

That can definitely be considered :) Maybe not everything all at once, but any new bits for sure.
- Leo

Quoted 25 lines

BR,
Jani.

Quoted 20 lines

Series is

Thanks,
Leo

Quoted 12 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +2 -0
 	if (caps->ext_caps->bits.oled == 1
 	    /*
 	     * ||
@@ -9020,6 +9025,8 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
 	if (connector_type == DRM_MODE_CONNECTOR_eDP) {
 		struct drm_privacy_screen *privacy_screen;
 
+		drm_connector_attach_panel_type_property(&aconnector->base);
+
 		privacy_screen = drm_privacy_screen_get(adev_to_drm(adev)->dev, NULL);
 		if (!IS_ERR(privacy_screen)) {
 			drm_connector_attach_privacy_screen_provider(&aconnector->base,