FAILED: patch "[PATCH] pinctrl: qcom: lpass-lpi: mark the GPIO controller as" failed to apply to 6.1-stable tree

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x ebc18e9854e5a2b62a041fb57b216a903af45b85
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026011236-imaginary-sweep-d796@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From ebc18e9854e5a2b62a041fb57b216a903af45b85 Mon Sep 17 00:00:00 2001
From: Bartosz Golaszewski <[email protected]>
Date: Wed, 26 Nov 2025 13:22:19 +0100
Subject: [PATCH] pinctrl: qcom: lpass-lpi: mark the GPIO controller as
sleeping

The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG():

[    9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[    9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker)
[    9.233669] preempt_count: 1, expected: 0
[    9.233673] RCU nest depth: 0, expected: 0
[    9.233688] Tainted: [W]=WARN
[    9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025
[    9.233694] Call trace:
[    9.233696]  show_stack+0x24/0x38 (C)
[    9.233709]  dump_stack_lvl+0x40/0x88
[    9.233716]  dump_stack+0x18/0x24
[    9.233722]  __might_resched+0x148/0x160
[    9.233731]  __might_sleep+0x38/0x98
[    9.233736]  mutex_lock+0x30/0xd8
[    9.233749]  lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi]
[    9.233757]  lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi]
[    9.233761]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233772]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233779]  gpiod_direction_output+0x38/0xd0
[    9.233786]  gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy]
[    9.233792]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233799]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233806]  gpiod_configure_flags+0x2c0/0x580
[    9.233812]  gpiod_find_and_request+0x358/0x4f8
[    9.233819]  gpiod_get_index+0x7c/0x98
[    9.233826]  devm_gpiod_get+0x34/0xb0
[    9.233829]  reset_gpio_probe+0x58/0x128 [reset_gpio]
[    9.233836]  auxiliary_bus_probe+0xb0/0xf0
[    9.233845]  really_probe+0x14c/0x450
[    9.233853]  __driver_probe_device+0xb0/0x188
[    9.233858]  driver_probe_device+0x4c/0x250
[    9.233863]  __driver_attach+0xf8/0x2a0
[    9.233868]  bus_for_each_dev+0xf8/0x158
[    9.233872]  driver_attach+0x30/0x48
[    9.233876]  bus_add_driver+0x158/0x2b8
[    9.233880]  driver_register+0x74/0x118
[    9.233886]  __auxiliary_driver_register+0x94/0xe8
[    9.233893]  init_module+0x34/0xfd0 [reset_gpio]
[    9.233898]  do_one_initcall+0xec/0x300
[    9.233903]  do_init_module+0x64/0x260
[    9.233910]  load_module+0x16c4/0x1900
[    9.233915]  __arm64_sys_finit_module+0x24c/0x378
[    9.233919]  invoke_syscall+0x4c/0xe8
[    9.233925]  el0_svc_common+0x8c/0xf0
[    9.233929]  do_el0_svc+0x28/0x40
[    9.233934]  el0_svc+0x38/0x100
[    9.233938]  el0t_64_sync_handler+0x84/0x130
[    9.233943]  el0t_64_sync+0x17c/0x180

Mark the controller as sleeping.

index 1c97ec44aa5f..78212f992843 100644
@@ -498,7 +498,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
 	pctrl->chip.base = -1;
 	pctrl->chip.ngpio = data->npins;
 	pctrl->chip.label = dev_name(dev);
-	pctrl->chip.can_sleep = false;
+	pctrl->chip.can_sleep = true;
 
 	mutex_init(&pctrl->lock);
 

The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG():

[    9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[    9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker)
[    9.233669] preempt_count: 1, expected: 0
[    9.233673] RCU nest depth: 0, expected: 0
[    9.233688] Tainted: [W]=WARN
[    9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025
[    9.233694] Call trace:
[    9.233696]  show_stack+0x24/0x38 (C)
[    9.233709]  dump_stack_lvl+0x40/0x88
[    9.233716]  dump_stack+0x18/0x24
[    9.233722]  __might_resched+0x148/0x160
[    9.233731]  __might_sleep+0x38/0x98
[    9.233736]  mutex_lock+0x30/0xd8
[    9.233749]  lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi]
[    9.233757]  lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi]
[    9.233761]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233772]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233779]  gpiod_direction_output+0x38/0xd0
[    9.233786]  gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy]
[    9.233792]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233799]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233806]  gpiod_configure_flags+0x2c0/0x580
[    9.233812]  gpiod_find_and_request+0x358/0x4f8
[    9.233819]  gpiod_get_index+0x7c/0x98
[    9.233826]  devm_gpiod_get+0x34/0xb0
[    9.233829]  reset_gpio_probe+0x58/0x128 [reset_gpio]
[    9.233836]  auxiliary_bus_probe+0xb0/0xf0
[    9.233845]  really_probe+0x14c/0x450
[    9.233853]  __driver_probe_device+0xb0/0x188
[    9.233858]  driver_probe_device+0x4c/0x250
[    9.233863]  __driver_attach+0xf8/0x2a0
[    9.233868]  bus_for_each_dev+0xf8/0x158
[    9.233872]  driver_attach+0x30/0x48
[    9.233876]  bus_add_driver+0x158/0x2b8
[    9.233880]  driver_register+0x74/0x118
[    9.233886]  __auxiliary_driver_register+0x94/0xe8
[    9.233893]  init_module+0x34/0xfd0 [reset_gpio]
[    9.233898]  do_one_initcall+0xec/0x300
[    9.233903]  do_init_module+0x64/0x260
[    9.233910]  load_module+0x16c4/0x1900
[    9.233915]  __arm64_sys_finit_module+0x24c/0x378
[    9.233919]  invoke_syscall+0x4c/0xe8
[    9.233925]  el0_svc_common+0x8c/0xf0
[    9.233929]  do_el0_svc+0x28/0x40
[    9.233934]  el0_svc+0x38/0x100
[    9.233938]  el0t_64_sync_handler+0x84/0x130
[    9.233943]  el0t_64_sync+0x17c/0x180

Mark the controller as sleeping.

---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bfcc5c45b8fa..35f46ca4cf9f 100644
@@ -435,7 +435,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
 	pctrl->chip.ngpio = data->npins;
 	pctrl->chip.label = dev_name(dev);
 	pctrl->chip.of_gpio_n_cells = 2;
-	pctrl->chip.can_sleep = false;
+	pctrl->chip.can_sleep = true;
 
 	mutex_init(&pctrl->lock);
 

2.47.3

What is the git id of this commit in Linus's tree?

thanks,

greg k-h