Skip to contentSkip to conversation

mmc: sdio: add NXP vendor and IW61x device IDs

PATCH In review Jeff Chen 2 participants 4 messages Jan 13 – Mar 24 MMC, SD and SDIO

lore
Share & tools
lore

Jeff Chen

author
#0 lore raw

PATCH 1/1 mmc: sdio: add NXP vendor and IW61x device IDs

Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to sdio_ids.h for future support of NXP Wi-Fi chips over SDIO.

---
 include/linux/mmc/sdio_ids.h | 3 +++
 1 file changed, 3 insertions(+)
include/linux/mmc/sdio_ids.h +3 -0
index 673cbdf43453..39ac2b612e4a 100644
@@ -116,6 +116,9 @@
 #define SDIO_VENDOR_ID_MICROCHIP_WILC		0x0296
 #define SDIO_DEVICE_ID_MICROCHIP_WILC1000	0x5347
 
+#define SDIO_VENDOR_ID_NXP			0x0471
+#define SDIO_DEVICE_ID_NXP_IW61X		0x0205
+
 #define SDIO_VENDOR_ID_REALTEK			0x024c
 #define SDIO_DEVICE_ID_REALTEK_RTW8723BS	0xb723
 #define SDIO_DEVICE_ID_REALTEK_RTW8821BS	0xb821
Signature · 1 line
2.34.1
#1 lore raw
Quoted 5 lines · Jeff Chen

Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to sdio_ids.h for future support of NXP Wi-Fi chips over SDIO.

Applied for next, thanks!

Kind regards
Uffe

Quoted 21 lines
---
 include/linux/mmc/sdio_ids.h | 3 +++
 1 file changed, 3 insertions(+)
include/linux/mmc/sdio_ids.h +3 -1
index 673cbdf43453..39ac2b612e4a 100644
@@ -116,6 +116,9 @@
 #define SDIO_VENDOR_ID_MICROCHIP_WILC          0x0296
 #define SDIO_DEVICE_ID_MICROCHIP_WILC1000      0x5347
 
+#define SDIO_VENDOR_ID_NXP                     0x0471
+#define SDIO_DEVICE_ID_NXP_IW61X               0x0205
+
 #define SDIO_VENDOR_ID_REALTEK                 0x024c
 #define SDIO_DEVICE_ID_REALTEK_RTW8723BS       0xb723
 #define SDIO_DEVICE_ID_REALTEK_RTW8821BS       0xb821
--

2.34.1

#2 lore raw
Quoted 5 lines · Ulf Hansson
Quoted 4 lines · Jeff Chen

Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to sdio_ids.h for future support of NXP Wi-Fi chips over SDIO.

Quoted 7 lines
Quoted 1 line

Applied for next, thanks!

Kind regards
Uffe

Hi Ulf,

Thanks for applying the IW61x SDIO ID patch to mmc-next.

May I ask when you expect this patch to be queued for mainline? The reason I ask is that the nxpwifi driver is currently under review in wireless-next, and without these SDIO IDs available in mainline (or in wireless-next), the nxpwifi series cannot be built by itself. This blocks further review and testing on the wireless side.

If the patch is not expected to reach mainline very soon, would it be acceptable for you to temporarily drop it from mmc-next?
In that case, I can include the SDIO ID addition directly as part of the nxpwifi patch series submitted to wireless-next (and keep your Ack), so that wireless-next can build cleanly during review.

Please let me know which workflow you prefer. I’m happy to follow whichever option fits best with your merge plans.

As discussed earlier with Johannes:
https://patchwork.kernel.org/project/linux-wireless/cover/[email protected]/

Thanks again for your help.

Best regards,
Jeff

Quoted 23 lines
Quoted 22 lines
---
 include/linux/mmc/sdio_ids.h | 3 +++
 1 file changed, 3 insertions(+)
include/linux/mmc/sdio_ids.h +3 -1
index 673cbdf43453..39ac2b612e4a 100644
@@ -116,6 +116,9 @@
 #define SDIO_VENDOR_ID_MICROCHIP_WILC          0x0296
 #define SDIO_DEVICE_ID_MICROCHIP_WILC1000      0x5347
 
+#define SDIO_VENDOR_ID_NXP                     0x0471
+#define SDIO_DEVICE_ID_NXP_IW61X               0x0205
+
 #define SDIO_VENDOR_ID_REALTEK                 0x024c
 #define SDIO_DEVICE_ID_REALTEK_RTW8723BS       0xb723
 #define SDIO_DEVICE_ID_REALTEK_RTW8821BS       0xb821
--

2.34.1

#3 lore raw
Quoted 15 lines · On Thu, 19 Mar 2026 at 19:58, <[email protected]> wrote:
Quoted 5 lines · Ulf Hansson
Quoted 4 lines · Jeff Chen

Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to sdio_ids.h for future support of NXP Wi-Fi chips over SDIO.

Quoted 7 lines
Quoted 1 line

Applied for next, thanks!

Kind regards
Uffe

Quoted 5 lines

Hi Ulf,

Thanks for applying the IW61x SDIO ID patch to mmc-next.

May I ask when you expect this patch to be queued for mainline?

It was intended for v7.0-rc1, but my pull-request for mmc was broken, so Linus rejected it.

That means this is queued for v7.1-rc1 instead. I usually send out my pull-request the first Monday the merge window opens.

Quoted 7 lines

The reason I ask is that the nxpwifi driver is currently under review in wireless-next, and without these SDIO IDs available in mainline (or in wireless-next), the nxpwifi series cannot be built by itself. This blocks further review and testing on the wireless side.

If the patch is not expected to reach mainline very soon, would it be acceptable for you to temporarily drop it from mmc-next?

Sorry, but I don't want to take the risk of doing a re-base this time. I have a lot queued for v7.1-rc1 and I am also hosting an immutable branch for cross-subsystem dependency.

Quoted 11 lines

In that case, I can include the SDIO ID addition directly as part of the nxpwifi patch series submitted to wireless-next (and keep your Ack), so that wireless-next can build cleanly during review.

Please let me know which workflow you prefer. I’m happy to follow whichever option fits best with your merge plans.

As discussed earlier with Johannes:
https://patchwork.kernel.org/project/linux-wireless/cover/[email protected]/

Thanks again for your help.

I guess you can try applying an exact same copy of the patch (pick it from my mmc tree). Since it's a really trivial one, maybe git can sort it out when the wireless-tree and the mmc-tree tree gets merged.

Although, as stated, I will not be able to help with re-basing this time.

Kind regards
Uffe

Quoted 26 lines

Best regards,
Jeff

Quoted 23 lines
Quoted 22 lines
---
 include/linux/mmc/sdio_ids.h | 3 +++
 1 file changed, 3 insertions(+)
include/linux/mmc/sdio_ids.h +3 -1
index 673cbdf43453..39ac2b612e4a 100644
@@ -116,6 +116,9 @@
 #define SDIO_VENDOR_ID_MICROCHIP_WILC          0x0296
 #define SDIO_DEVICE_ID_MICROCHIP_WILC1000      0x5347
 
+#define SDIO_VENDOR_ID_NXP                     0x0471
+#define SDIO_DEVICE_ID_NXP_IW61X               0x0205
+
 #define SDIO_VENDOR_ID_REALTEK                 0x024c
 #define SDIO_DEVICE_ID_REALTEK_RTW8723BS       0xb723
 #define SDIO_DEVICE_ID_REALTEK_RTW8821BS       0xb821
--

2.34.1