Skip to contentSkip to conversation

Fix CVE CVSS scoring to use maximum score from all sources

PATCH In review Het Patel -X (hetpat - E INFOCHIPS PRIVATE LIMITED at Cisco) 2 participants 3 messages Jan 13 – Jan 21

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix CVE CVSS scoring to use maximum score from all sources

From: Het Patel <[email protected]>

The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the CVSSv2, CVSSv3, and CVSSv4 metrics arrays, which could be a Secondary source with a lower score instead of the Primary source with the actual severity score.

This fix takes maximum CVSS score.

---
 .../meta/cve-update-nvd2-native.bb            | 55 +++++++++++++------
 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb +39 -16
index 945bd1d927..28d5810d5d 100644
@@ -352,32 +352,55 @@ def update_db(conn, elt):
         if desc['lang'] == 'en':
             cveDesc = desc['value']
     date = elt['cve']['lastModified']
+
+    # Extract maximum CVSS scores from all sources (Primary and Secondary)
+    cvssv2 = 0.0
     try:
-        accessVector = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
-        vectorString = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
-        cvssv2 = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV2 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV2']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv2:
+                cvssv2 = score
+                accessVector = metric['cvssData']['accessVector']
+                vectorString = metric['cvssData']['vectorString']
     except KeyError:
-        cvssv2 = 0.0
-    cvssv3 = None
+        pass
+
+    cvssv3 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
-        cvssv3 = elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV30 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV30']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
+
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
-        cvssv3 = cvssv3 or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV31 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV31']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
-    cvssv3 = cvssv3 or 0.0
+
+    cvssv4 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
-        cvssv4 = elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV40 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV40']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv4:
+                cvssv4 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
-        cvssv4 = 0.0
+        pass
+
     accessVector = accessVector or "UNKNOWN"
     vectorString = vectorString or "UNKNOWN"
 
#1 lore raw
Quoted 11 lines · Het Patel via lists.openembedded.org

From: Het Patel <[email protected]>

The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the CVSSv2, CVSSv3, and CVSSv4 metrics arrays, which could be a Secondary source with a lower score instead of the Primary source with the actual severity score.

This fix takes maximum CVSS score.

Hello,

Does this patch interact with the open bug 15931 – CVE Reporting wrong CVSSv3 score (https://bugzilla.yoctoproject.org/show_bug.cgi?id=15931) ?

Also, does this need to be fixed on master and/or whinlatter? If yes, you should first send this patch (adapted most likely) to master. Then, once merged, send a backport request to the stable branches.

Thanks!

Quoted 117 lines
---
 .../meta/cve-update-nvd2-native.bb            | 55 +++++++++++++------
 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb +3 -1
index 945bd1d927..28d5810d5d 100644
@@ -352,32 +352,55 @@ def update_db(conn, elt):
         if desc['lang'] == 'en':
             cveDesc = desc['value']
     date = elt['cve']['lastModified']
+
+    # Extract maximum CVSS scores from all sources (Primary and Secondary)
+    cvssv2 = 0.0
     try:
-        accessVector =

elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
- vectorString =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
- cvssv2 =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV2 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +9 -3
+        for metric in elt['cve']['metrics']['cvssMetricV2']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv2:
+                cvssv2 = score
+                accessVector = metric['cvssData']['accessVector']
+                vectorString = metric['cvssData']['vectorString']
     except KeyError:
-        cvssv2 = 0.0
-    cvssv3 = None
+        pass
+
+    cvssv3 = 0.0
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
- cvssv3 =
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV30 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV30']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
pass

meta/recipes-core/meta/cve-update-nvd2-native.bb +1 -1
+
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
- cvssv3 = cvssv3 or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV31 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV31']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
pass

meta/recipes-core/meta/cve-update-nvd2-native.bb +2 -2
-    cvssv3 = cvssv3 or 0.0
+
+    cvssv4 = 0.0
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
- cvssv4 =
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV40 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV40']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv4:
+                cvssv4 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:

meta/recipes-core/meta/cve-update-nvd2-native.bb +2 -2
-        cvssv4 = 0.0
+        pass
+
     accessVector = accessVector or "UNKNOWN"
     vectorString = vectorString or "UNKNOWN"
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group. View/Reply Online (#229229):
https://lists.openembedded.org/g/openembedded-core/message/229229
Mute This Topic: https://lists.openembedded.org/mt/117239924/4316185
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 2 lines
Yoann Congal
Smile ECS
#2 lore raw

Hi,

Yes, this patch directly addresses Bug 15931 (CVE Reporting wrong CVSSv3 score). The bug reports two issues:

1.
The code only extracted the first element [0] from the CVSS metrics arrays, which could be a Secondary source with a lower score instead of the Primary source
2.
The cvssv3 = cvssv3 or ... logic meant v3.0 scores took precedence over v3.1 scores

This patch fixes both by iterating through all metric entries and selecting the maximum score.

I will send this patch to the master first. Once merged, I'll submit a backport request to the stable branches.

Thanks,
Het
________________________________
From: [email protected] <[email protected]> on behalf of Yoann Congal via lists.openembedded.org <[email protected]>
Sent: Friday, January 16, 2026 4:01 PM
To: Het Patel -X (hetpat - E INFOCHIPS PRIVATE LIMITED at Cisco) <[email protected]>
Cc: [email protected] <[email protected]>; xe-linux-external(mailer list) <[email protected]>
Subject: Re: [OE-core] [scarthgap] [PATCH] Fix CVE CVSS scoring to use maximum score from all sources

Le mar. 13 janv. 2026 à 08:08, Het Patel via lists.openembedded.org<http://lists.openembedded.org> <[email protected]<mailto:[email protected]>> a écrit :
From: Het Patel <[email protected]<mailto:[email protected]>>

The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the CVSSv2, CVSSv3, and CVSSv4 metrics arrays, which could be a Secondary source with a lower score instead of the Primary source with the actual severity score.

This fix takes maximum CVSS score.

Hello,

Does this patch interact with the open bug 15931 – CVE Reporting wrong CVSSv3 score (https://bugzilla.yoctoproject.org/show_bug.cgi?id=15931) ?

Also, does this need to be fixed on master and/or whinlatter?
If yes, you should first send this patch (adapted most likely) to master. Then, once merged, send a backport request to the stable branches.

Thanks!

---
 .../meta/cve-update-nvd2-native.bb<http://cve-update-nvd2-native.bb>            | 55 +++++++++++++------
 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb<http://cve-update-nvd2-native.bb> +39 -16
index 945bd1d927..28d5810d5d 100644
@@ -352,32 +352,55 @@ def update_db(conn, elt):
         if desc['lang'] == 'en':
             cveDesc = desc['value']
     date = elt['cve']['lastModified']
+
+    # Extract maximum CVSS scores from all sources (Primary and Secondary)
+    cvssv2 = 0.0
     try:
-        accessVector = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
-        vectorString = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
-        cvssv2 = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV2 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV2']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv2:
+                cvssv2 = score
+                accessVector = metric['cvssData']['accessVector']
+                vectorString = metric['cvssData']['vectorString']
     except KeyError:
-        cvssv2 = 0.0
-    cvssv3 = None
+        pass
+
+    cvssv3 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
-        cvssv3 = elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV30 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV30']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
+
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
-        cvssv3 = cvssv3 or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV31 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV31']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
-    cvssv3 = cvssv3 or 0.0
+
+    cvssv4 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
-        cvssv4 = elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV40 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV40']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv4:
+                cvssv4 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
-        cvssv4 = 0.0
+        pass
+
     accessVector = accessVector or "UNKNOWN"
     vectorString = vectorString or "UNKNOWN"
 

--
Yoann Congal
Smile ECS