net: remove HIPPI support and RoadRunner HIPPI driver
Subsystems (6)
PATCH 1/1 net: remove HIPPI support and RoadRunner HIPPI driver
HIPPI has not been relevant for over two decades. It was rapidly eclipsed by Fibre Channel, and even when it was new, it was confined to very high-end hardware. The HIPPI code has only received tree-wide changes and fixes by inspection in the entire Git history. Remove HIPPI support and the rrunner HIPPI driver, and move the former maintainer to the CREDITS file. Keep the include/uapi/linux/if_hippi.h header because it is used by the TUN code, and to avoid breaking userspace, however unlikely that may be.
--- CREDITS | 4 + MAINTAINERS | 8 - arch/mips/configs/mtx1_defconfig | 2 - drivers/net/Kconfig | 2 - drivers/net/Makefile | 1 - drivers/net/hippi/Kconfig | 40 - drivers/net/hippi/Makefile | 6 - drivers/net/hippi/rrunner.c | 1687 ------------------------------ drivers/net/hippi/rrunner.h | 848 --------------- include/linux/hippidevice.h | 40 - include/linux/pci_ids.h | 3 - net/802/Makefile | 1 - net/802/hippi.c | 193 ---- rust/kernel/pci/id.rs | 1 - 14 files changed, 4 insertions(+), 2832 deletions(-) delete mode 100644 drivers/net/hippi/Kconfig delete mode 100644 drivers/net/hippi/Makefile delete mode 100644 drivers/net/hippi/rrunner.c delete mode 100644 drivers/net/hippi/rrunner.h delete mode 100644 include/linux/hippidevice.h delete mode 100644 net/802/hippi.c
CREDITS +4 -0
@@ -3801,6 +3801,10 @@ S: Post Office Box 500 S: Batavia, Illinois 60510 S: USA +N: Jes Sorensen +E: [email protected] +D: HIPPI support and Essential RoadRunner driver + N: Leo Spiekman E: [email protected] W: http://www.netlabs.net/hp/leo/
MAINTAINERS +0 -8
@@ -11312,14 +11312,6 @@ S: Maintained F: Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml F: drivers/input/touchscreen/himax_hx852x.c -HIPPI -M: Jes Sorensen <[email protected]> -S: Maintained -F: drivers/net/hippi/ -F: include/linux/hippidevice.h -F: include/uapi/linux/if_hippi.h -F: net/802/hippi.c - HIRSCHMANN HELLCREEK ETHERNET SWITCH DRIVER M: Kurt Kanzenbach <[email protected]> L: [email protected]
arch/mips/configs/mtx1_defconfig +0 -2
@@ -310,8 +310,6 @@ CONFIG_PCMCIA_XIRC2PS=m CONFIG_FDDI=y CONFIG_DEFXX=m CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m CONFIG_CICADA_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_LXT_PHY=m
drivers/net/Kconfig +0 -2
@@ -516,8 +516,6 @@ source "drivers/net/ethernet/Kconfig" source "drivers/net/fddi/Kconfig" -source "drivers/net/hippi/Kconfig" - source "drivers/net/ipa/Kconfig" source "drivers/net/phy/Kconfig"
drivers/net/Makefile +0 -1
@@ -55,7 +55,6 @@ obj-y += dsa/ endif obj-$(CONFIG_ETHERNET) += ethernet/ obj-$(CONFIG_FDDI) += fddi/ -obj-$(CONFIG_HIPPI) += hippi/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_QCOM_IPA) += ipa/ obj-$(CONFIG_PLIP) += plip/
drivers/net/hippi/Kconfig deleted +0 -40
@@ -1,40 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# HIPPI network device configuration -# - -config HIPPI - bool "HIPPI driver support" - depends on INET && PCI - help - HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and - 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI - can run over copper (25m) or fiber (300m on multi-mode or 10km on - single-mode). HIPPI networks are commonly used for clusters and to - connect to super computers. If you are connected to a HIPPI network - and have a HIPPI network card in your computer that you want to use - under Linux, say Y here (you must also remember to enable the driver - for your HIPPI card below). Most people will say N here. - -if HIPPI - -config ROADRUNNER - tristate "Essential RoadRunner HIPPI PCI adapter support" - depends on PCI - help - Say Y here if this is your PCI HIPPI network card. - - To compile this driver as a module, choose M here: the module - will be called rrunner. If unsure, say N. - -config ROADRUNNER_LARGE_RINGS - bool "Use large TX/RX rings" - depends on ROADRUNNER - help - If you say Y here, the RoadRunner driver will preallocate up to 2 MB - of additional memory to allow for fastest operation, both for - transmitting and receiving. This memory cannot be used by any other - kernel code or by user space programs. Say Y here only if you have - the memory. - -endif # HIPPI
drivers/net/hippi/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the HIPPI network device drivers. -# - -obj-$(CONFIG_ROADRUNNER) += rrunner.o
drivers/net/hippi/rrunner.c deleted +0 -1687
1,687 lines not on this page · raw message
drivers/net/hippi/rrunner.h deleted +0 -848
848 lines not on this page · raw message
include/linux/hippidevice.h deleted +0 -40
@@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* -* INET An implementation of the TCP/IP protocol suite for the LINUX -* operating system. INET is implemented using the BSD Socket -* interface as the means of communication with the user level. -* -* Definitions for the HIPPI handlers. -* -* Version: @(#)hippidevice.h 1.0.0 05/26/97 -* -* Author: Jes Sorensen, <[email protected]> -* -* hippidevice.h is based on previous fddidevice.h work by -* Ross Biro -* Fred N. van Kempen, <[email protected]> -* Alan Cox, <[email protected]> -* Lawrence V. Stefani, <[email protected]> -*/ -#ifndef _LINUX_HIPPIDEVICE_H -#define _LINUX_HIPPIDEVICE_H - -#include <linux/if_hippi.h> - -#ifdef __KERNEL__ - -struct neigh_parms ; -struct net_device ; -struct sk_buff ; - -struct hippi_cb { -__u32 ifield; -}; - -__be16 hippi_type_trans (struct sk_buff *skb,struct net_device *dev); -int hippi_mac_addr (struct net_device *dev,void *p); -int hippi_neigh_setup_dev (struct net_device *dev,struct neigh_parms *p); -struct net_device *alloc_hippi_dev (int sizeof_priv); -#endif - -#endif /* _LINUX_HIPPIDEVICE_H */
include/linux/pci_ids.h +0 -3
@@ -1733,9 +1733,6 @@#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 -#define PCI_VENDOR_ID_ESSENTIAL 0x120f -#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 -#define PCI_VENDOR_ID_O2 0x1217#define PCI_DEVICE_ID_O2_6729 0x6729#define PCI_DEVICE_ID_O2_6730 0x673a
net/802/Makefile +0 -1
@@ -6,7 +6,6 @@ obj-$(CONFIG_LLC) += psnap.o obj-$(CONFIG_NET_FC) += fc.o obj-$(CONFIG_FDDI) += fddi.o -obj-$(CONFIG_HIPPI) += hippi.o obj-$(CONFIG_ATALK) += psnap.o obj-$(CONFIG_STP) += stp.o obj-$(CONFIG_GARP) += garp.o
net/802/hippi.c deleted +0 -193
193 lines not on this page · raw message
rust/kernel/pci/id.rs +0 -1
@@ -416,7 +416,6 @@ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { MICROSEMI = bindings::PCI_VENDOR_ID_MICROSEMI, // 0x11f8 RP = bindings::PCI_VENDOR_ID_RP, // 0x11fe CYCLADES = bindings::PCI_VENDOR_ID_CYCLADES, // 0x120e - ESSENTIAL = bindings::PCI_VENDOR_ID_ESSENTIAL, // 0x120f O2 = bindings::PCI_VENDOR_ID_O2, // 0x1217 THREEDX = bindings::PCI_VENDOR_ID_3DFX, // 0x121a AVM = bindings::PCI_VENDOR_ID_AVM, // 0x1244
Signature · 1 line
2.43.0
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Sun, 18 Jan 2026 18:24:04 -0800 you wrote:
HIPPI has not been relevant for over two decades. It was rapidly eclipsed by Fibre Channel, and even when it was new, it was confined to very high-end hardware. The HIPPI code has only received tree-wide changes and fixes by inspection in the entire Git history. Remove HIPPI support and the rrunner HIPPI driver, and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.hheader because it is used by the TUN code, and to avoid breaking userspace, however unlikely that may be.[...]
Here is the summary with links:
- [net-next] net: remove HIPPI support and RoadRunner HIPPI driver
https://git.kernel.org/netdev/net-next/c/d8f87aa5fa0a
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html