Skip to contentSkip to conversation

FAILED: patch "[PATCH] x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever" failed to apply to 6.6-stable tree

PATCH In review [email protected] 3 participants 3 messages Jan 19

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x b45f721775947a84996deb5c661602254ce25ce6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026011917-record-decorated-9020@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b45f721775947a84996deb5c661602254ce25ce6 Mon Sep 17 00:00:00 2001
From: Sean Christopherson <[email protected]>
Date: Wed, 31 Dec 2025 16:43:15 +0100
Subject: [PATCH] x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever
XFD[i]=1

When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel.

E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:

  ------------[ cut here ]------------
  WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
  Modules linked in: kvm_intel kvm irqbypass
  CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:exc_device_not_available+0x101/0x110
  Call Trace:
   <TASK>
   asm_exc_device_not_available+0x1a/0x20
  RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
   switch_fpu_return+0x4a/0xb0
   kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
   kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
   __x64_sys_ioctl+0x8f/0xd0
   do_syscall_64+0x62/0x940
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>
  ---[ end trace 0000000000000000 ]---

This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd().

and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:

  ------------[ cut here ]------------
  WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
  Modules linked in: kvm_intel kvm irqbypass
  CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:exc_device_not_available+0x101/0x110
  Call Trace:
   <TASK>
   asm_exc_device_not_available+0x1a/0x20
  RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
   fpu_swap_kvm_fpstate+0x6b/0x120
   kvm_load_guest_fpu+0x30/0x80 [kvm]
   kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
   kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
   __x64_sys_ioctl+0x8f/0xd0
   do_syscall_64+0x62/0x940
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>
  ---[ end trace 0000000000000000 ]---

The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component):

If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i).

Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD.

Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.

Fixes 820a6ee944e7 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)

[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]

arch/x86/kernel/fpu/core.c +29 -3
index da233f20ae6f..608983806fd7 100644
@@ -319,10 +319,29 @@ EXPORT_SYMBOL_FOR_KVM(fpu_enable_guest_xfd_features);
 #ifdef CONFIG_X86_64
 void fpu_update_guest_xfd(struct fpu_guest *guest_fpu, u64 xfd)
 {
+	struct fpstate *fpstate = guest_fpu->fpstate;
+
 	fpregs_lock();
-	guest_fpu->fpstate->xfd = xfd;
-	if (guest_fpu->fpstate->in_use)
-		xfd_update_state(guest_fpu->fpstate);
+
+	/*
+	 * KVM's guest ABI is that setting XFD[i]=1 *can* immediately revert the
+	 * save state to its initial configuration.  Likewise, KVM_GET_XSAVE does
+	 * the same as XSAVE and returns XSTATE_BV[i]=0 whenever XFD[i]=1.
+	 *
+	 * If the guest's FPU state is in hardware, just update XFD: the XSAVE
+	 * in fpu_swap_kvm_fpstate will clear XSTATE_BV[i] whenever XFD[i]=1.
+	 *
+	 * If however the guest's FPU state is NOT resident in hardware, clear
+	 * disabled components in XSTATE_BV now, or a subsequent XRSTOR will
+	 * attempt to load disabled components and generate #NM _in the host_.
+	 */
+	if (xfd && test_thread_flag(TIF_NEED_FPU_LOAD))
+		fpstate->regs.xsave.header.xfeatures &= ~xfd;
+
+	fpstate->xfd = xfd;
+	if (fpstate->in_use)
+		xfd_update_state(fpstate);
+
 	fpregs_unlock();
 }
 EXPORT_SYMBOL_FOR_KVM(fpu_update_guest_xfd);
@@ -430,6 +449,13 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf,
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
+	/*
+	 * Disabled features must be in their initial state, otherwise XRSTOR
+	 * causes an exception.
+	 */
+	if (WARN_ON_ONCE(ustate->xsave.header.xfeatures & kstate->xfd))
+		return -EINVAL;
+
 	/*
 	 * Nullify @vpkru to preserve its current value if PKRU's bit isn't set
 	 * in the header.  KVM's odd ABI is to leave PKRU untouched in this
arch/x86/kvm/x86.c +9 -0
index ff8812f3a129..63afdb6bb078 100644
@@ -5807,9 +5807,18 @@ static int kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
 					struct kvm_xsave *guest_xsave)
 {
+	union fpregs_state *xstate = (union fpregs_state *)guest_xsave->region;
+
 	if (fpstate_is_confidential(&vcpu->arch.guest_fpu))
 		return vcpu->kvm->arch.has_protected_state ? -EINVAL : 0;
 
+	/*
+	 * For backwards compatibility, do not expect disabled features to be in
+	 * their initial state.  XSTATE_BV[i] must still be cleared whenever
+	 * XFD[i]=1, or XRSTOR would cause a #NM.
+	 */
+	xstate->xsave.header.xfeatures &= ~vcpu->arch.guest_fpu.fpstate->xfd;
+
 	return fpu_copy_uabi_to_guest_fpstate(&vcpu->arch.guest_fpu,
 					      guest_xsave->region,
 					      kvm_caps.supported_xcr0,
maintainer
#1 lore raw

PATCH 1/1 x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1

From: Sean Christopherson <[email protected]>

[ Upstream commit b45f721775947a84996deb5c661602254ce25ce6 ]

When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel.

E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:

  ------------[ cut here ]------------
  WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
  Modules linked in: kvm_intel kvm irqbypass
  CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:exc_device_not_available+0x101/0x110
  Call Trace:
   <TASK>
   asm_exc_device_not_available+0x1a/0x20
  RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
   switch_fpu_return+0x4a/0xb0
   kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
   kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
   __x64_sys_ioctl+0x8f/0xd0
   do_syscall_64+0x62/0x940
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>
  ---[ end trace 0000000000000000 ]---

This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd().

and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:

  ------------[ cut here ]------------
  WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
  Modules linked in: kvm_intel kvm irqbypass
  CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:exc_device_not_available+0x101/0x110
  Call Trace:
   <TASK>
   asm_exc_device_not_available+0x1a/0x20
  RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
   fpu_swap_kvm_fpstate+0x6b/0x120
   kvm_load_guest_fpu+0x30/0x80 [kvm]
   kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
   kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
   __x64_sys_ioctl+0x8f/0xd0
   do_syscall_64+0x62/0x940
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>
  ---[ end trace 0000000000000000 ]---

The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component):

If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i).

Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD.

Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.

Fixes 820a6ee944e7 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)

[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]

---
 arch/x86/kernel/fpu/core.c | 32 +++++++++++++++++++++++++++++---
 arch/x86/kvm/x86.c         |  9 +++++++++
 2 files changed, 38 insertions(+), 3 deletions(-)
arch/x86/kernel/fpu/core.c +29 -3
index 175c14567cf14..75dad6e3c9840 100644
@@ -294,10 +294,29 @@ EXPORT_SYMBOL_GPL(fpu_enable_guest_xfd_features);
 #ifdef CONFIG_X86_64
 void fpu_update_guest_xfd(struct fpu_guest *guest_fpu, u64 xfd)
 {
+	struct fpstate *fpstate = guest_fpu->fpstate;
+
 	fpregs_lock();
-	guest_fpu->fpstate->xfd = xfd;
-	if (guest_fpu->fpstate->in_use)
-		xfd_update_state(guest_fpu->fpstate);
+
+	/*
+	 * KVM's guest ABI is that setting XFD[i]=1 *can* immediately revert the
+	 * save state to its initial configuration.  Likewise, KVM_GET_XSAVE does
+	 * the same as XSAVE and returns XSTATE_BV[i]=0 whenever XFD[i]=1.
+	 *
+	 * If the guest's FPU state is in hardware, just update XFD: the XSAVE
+	 * in fpu_swap_kvm_fpstate will clear XSTATE_BV[i] whenever XFD[i]=1.
+	 *
+	 * If however the guest's FPU state is NOT resident in hardware, clear
+	 * disabled components in XSTATE_BV now, or a subsequent XRSTOR will
+	 * attempt to load disabled components and generate #NM _in the host_.
+	 */
+	if (xfd && test_thread_flag(TIF_NEED_FPU_LOAD))
+		fpstate->regs.xsave.header.xfeatures &= ~xfd;
+
+	fpstate->xfd = xfd;
+	if (fpstate->in_use)
+		xfd_update_state(fpstate);
+
 	fpregs_unlock();
 }
 EXPORT_SYMBOL_GPL(fpu_update_guest_xfd);
@@ -405,6 +424,13 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf,
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
+	/*
+	 * Disabled features must be in their initial state, otherwise XRSTOR
+	 * causes an exception.
+	 */
+	if (WARN_ON_ONCE(ustate->xsave.header.xfeatures & kstate->xfd))
+		return -EINVAL;
+
 	/*
 	 * Nullify @vpkru to preserve its current value if PKRU's bit isn't set
 	 * in the header.  KVM's odd ABI is to leave PKRU untouched in this
arch/x86/kvm/x86.c +9 -0
index 8acaaa8f17b98..89df215ebf284 100644
@@ -5432,9 +5432,18 @@ static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
 					struct kvm_xsave *guest_xsave)
 {
+	union fpregs_state *xstate = (union fpregs_state *)guest_xsave->region;
+
 	if (fpstate_is_confidential(&vcpu->arch.guest_fpu))
 		return 0;
 
+	/*
+	 * For backwards compatibility, do not expect disabled features to be in
+	 * their initial state.  XSTATE_BV[i] must still be cleared whenever
+	 * XFD[i]=1, or XRSTOR would cause a #NM.
+	 */
+	xstate->xsave.header.xfeatures &= ~vcpu->arch.guest_fpu.fpstate->xfd;
+
 	return fpu_copy_uabi_to_guest_fpstate(&vcpu->arch.guest_fpu,
 					      guest_xsave->region,
 					      kvm_caps.supported_xcr0,
Signature · 1 line
2.51.0
maintainer Reviewed-by on v1 1/1
#2 lore raw

Re: [PATCH 6.6.y] x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1

Quoted 162 lines · Sasha Levin

From: Sean Christopherson <[email protected]>

[ Upstream commit b45f721775947a84996deb5c661602254ce25ce6 ]

When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel.

E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:

   ------------[ cut here ]------------
   WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
   Modules linked in: kvm_intel kvm irqbypass
   CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
   RIP: 0010:exc_device_not_available+0x101/0x110
   Call Trace:
    <TASK>
    asm_exc_device_not_available+0x1a/0x20
   RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
    switch_fpu_return+0x4a/0xb0
    kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
    kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
    __x64_sys_ioctl+0x8f/0xd0
    do_syscall_64+0x62/0x940
    entry_SYSCALL_64_after_hwframe+0x4b/0x53
    </TASK>
   ---[ end trace 0000000000000000 ]---

This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd().

and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:

   ------------[ cut here ]------------
   WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
   Modules linked in: kvm_intel kvm irqbypass
   CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
   RIP: 0010:exc_device_not_available+0x101/0x110
   Call Trace:
    <TASK>
    asm_exc_device_not_available+0x1a/0x20
   RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
    fpu_swap_kvm_fpstate+0x6b/0x120
    kvm_load_guest_fpu+0x30/0x80 [kvm]
    kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
    kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
    __x64_sys_ioctl+0x8f/0xd0
    do_syscall_64+0x62/0x940
    entry_SYSCALL_64_after_hwframe+0x4b/0x53
    </TASK>
   ---[ end trace 0000000000000000 ]---

The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component):

If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i).

Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD.

Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.

Fixes 820a6ee944e7 ("kvm: x86: Add emulation for IA32_XFD", 2022-01-14)

[Move clearing of XSTATE_BV from fpu_copy_uabi_to_guest_fpstate
to kvm_vcpu_ioctl_x86_set_xsave. - Paolo]

---
  arch/x86/kernel/fpu/core.c | 32 +++++++++++++++++++++++++++++---
  arch/x86/kvm/x86.c         |  9 +++++++++
  2 files changed, 38 insertions(+), 3 deletions(-)
arch/x86/kernel/fpu/core.c +29 -3
index 175c14567cf14..75dad6e3c9840 100644
@@ -294,10 +294,29 @@ EXPORT_SYMBOL_GPL(fpu_enable_guest_xfd_features);
  #ifdef CONFIG_X86_64
  void fpu_update_guest_xfd(struct fpu_guest *guest_fpu, u64 xfd)
  {
+	struct fpstate *fpstate = guest_fpu->fpstate;
+
  	fpregs_lock();
-	guest_fpu->fpstate->xfd = xfd;
-	if (guest_fpu->fpstate->in_use)
-		xfd_update_state(guest_fpu->fpstate);
+
+	/*
+	 * KVM's guest ABI is that setting XFD[i]=1 *can* immediately revert the
+	 * save state to its initial configuration.  Likewise, KVM_GET_XSAVE does
+	 * the same as XSAVE and returns XSTATE_BV[i]=0 whenever XFD[i]=1.
+	 *
+	 * If the guest's FPU state is in hardware, just update XFD: the XSAVE
+	 * in fpu_swap_kvm_fpstate will clear XSTATE_BV[i] whenever XFD[i]=1.
+	 *
+	 * If however the guest's FPU state is NOT resident in hardware, clear
+	 * disabled components in XSTATE_BV now, or a subsequent XRSTOR will
+	 * attempt to load disabled components and generate #NM _in the host_.
+	 */
+	if (xfd && test_thread_flag(TIF_NEED_FPU_LOAD))
+		fpstate->regs.xsave.header.xfeatures &= ~xfd;
+
+	fpstate->xfd = xfd;
+	if (fpstate->in_use)
+		xfd_update_state(fpstate);
+
  	fpregs_unlock();
  }
  EXPORT_SYMBOL_GPL(fpu_update_guest_xfd);
@@ -405,6 +424,13 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf,
  	if (ustate->xsave.header.xfeatures & ~xcr0)
  		return -EINVAL;
 
+	/*
+	 * Disabled features must be in their initial state, otherwise XRSTOR
+	 * causes an exception.
+	 */
+	if (WARN_ON_ONCE(ustate->xsave.header.xfeatures & kstate->xfd))
+		return -EINVAL;
+
  	/*
  	 * Nullify @vpkru to preserve its current value if PKRU's bit isn't set
  	 * in the header.  KVM's odd ABI is to leave PKRU untouched in this
arch/x86/kvm/x86.c +2 -0
index 8acaaa8f17b98..89df215ebf284 100644
@@ -5432,9 +5432,18 @@ static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu,
  static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
  					struct kvm_xsave *guest_xsave)
  {
+	union fpregs_state *xstate = (union fpregs_state *)guest_xsave->region;
+
  	if (fpstate_is_confidential(&vcpu->arch.guest_fpu))
  		return 0;
 

arch/x86/kvm/x86.c static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu, · line 5449

Quoted 10 lines
arch/x86/kvm/x86.c +7 -0
+	/*
+	 * For backwards compatibility, do not expect disabled features to be in
+	 * their initial state.  XSTATE_BV[i] must still be cleared whenever
+	 * XFD[i]=1, or XRSTOR would cause a #NM.
+	 */
+	xstate->xsave.header.xfeatures &= ~vcpu->arch.guest_fpu.fpstate->xfd;
+
  	return fpu_copy_uabi_to_guest_fpstate(&vcpu->arch.guest_fpu,
  					      guest_xsave->region,
  					      kvm_caps.supported_xcr0,