Various SI power management fixes
Subsystems (3)
cover Various SI power management fixes
This is another attempt at fixing a few SI power management related issues, including the Radeon 430 powertune issue as well as an issue with power2_cap that regressed recently.
Timur Kristóf (5):
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting drm/amd/pm: Don't clear SI SMC table when setting power limit drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2) drm/amd/pm: Return -EOPNOTSUPP when can't read power limit drm/amd/pm: Correct comment above power2_cap attributes
drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 2 +- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 31 +++++++++++----------- 3 files changed, 18 insertions(+), 17 deletions(-)
Signature · 1 line
2.52.0
PATCH 1/5 drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
Use WREG32 to write mmCG_THERMAL_INT.
This is a direct access register.
--- drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c +4 -4
@@ -7600,12 +7600,12 @@ static int si_dpm_set_interrupt_state(struct amdgpu_device *adev,case AMDGPU_IRQ_STATE_DISABLE : cg_thermal_int =RREG32_SMC (mmCG_THERMAL_INT); cg_thermal_int |=CG_THERMAL_INT__THERM_INT_MASK_HIGH_MASK ; -WREG32_SMC (mmCG_THERMAL_INT, cg_thermal_int); +WREG32 (mmCG_THERMAL_INT, cg_thermal_int);break ;case AMDGPU_IRQ_STATE_ENABLE : cg_thermal_int =RREG32_SMC (mmCG_THERMAL_INT); cg_thermal_int &= ~CG_THERMAL_INT__THERM_INT_MASK_HIGH_MASK ; -WREG32_SMC (mmCG_THERMAL_INT, cg_thermal_int); +WREG32 (mmCG_THERMAL_INT, cg_thermal_int);break ;default :break ;
@@ -7617,12 +7617,12 @@ static int si_dpm_set_interrupt_state(struct amdgpu_device *adev,case AMDGPU_IRQ_STATE_DISABLE : cg_thermal_int =RREG32_SMC (mmCG_THERMAL_INT); cg_thermal_int |=CG_THERMAL_INT__THERM_INT_MASK_LOW_MASK ; -WREG32_SMC (mmCG_THERMAL_INT, cg_thermal_int); +WREG32 (mmCG_THERMAL_INT, cg_thermal_int);break ;case AMDGPU_IRQ_STATE_ENABLE : cg_thermal_int =RREG32_SMC (mmCG_THERMAL_INT); cg_thermal_int &= ~CG_THERMAL_INT__THERM_INT_MASK_LOW_MASK ; -WREG32_SMC (mmCG_THERMAL_INT, cg_thermal_int); +WREG32 (mmCG_THERMAL_INT, cg_thermal_int);break ;default :break ;
Signature · 1 line
2.52.0
PATCH 2/5 drm/amd/pm: Don't clear SI SMC table when setting power limit
In reply to Timur KristófThere is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
--- drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 10 ---------- 1 file changed, 10 deletions(-)
drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c +0 -10
@@ -2273,8 +2273,6 @@ static int si_populate_smc_tdp_limits(struct amdgpu_device *adev,if (scaling_factor ==0 )return -EINVAL ; -memset (smc_table,0 ,sizeof (SISLANDS_SMC_STATETABLE )); - ret = si_calculate_adjusted_tdp_limits(adev, false, /* ??? */ adev->pm.dpm.tdp_adjustment,
@@ -2328,16 +2326,8 @@ static int si_populate_smc_tdp_limits_2(struct amdgpu_device *adev,if (ni_pi->enable_power_containment) {SISLANDS_SMC_STATETABLE *smc_table = &si_pi->smc_statetable; -u32 scaling_factor =si_get_smc_power_scaling_factor (adev);int ret; -memset (smc_table,0 ,sizeof (SISLANDS_SMC_STATETABLE )); - - smc_table->dpm2Params.NearTDPLimit = -cpu_to_be32 (si_scale_power_for_smc (adev->pm.dpm.near_tdp_limit_adjusted, scaling_factor) *1000 ); - smc_table->dpm2Params.SafePowerLimit = -cpu_to_be32 (si_scale_power_for_smc ((adev->pm.dpm.near_tdp_limit_adjusted *SISLANDS_DPM2_TDP_SAFE_LIMIT_PERCENT ) /100 , scaling_factor) *1000 ); - ret = amdgpu_si_copy_bytes_to_smc(adev, (si_pi->state_table_start + offsetof(SISLANDS_SMC_STATETABLE, dpm2Params) +
Signature · 1 line
2.52.0
PATCH 3/5 drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
In reply to Timur KristófRadeon 430 and 520 are OEM GPUs from 2016~2017 They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU, never allowing it to reach its maximum SCLK. Work around this bug by raising the TDP limits we program to the SMC from 24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the above issue, these GPUs never reached a high SCLK on Linux, and the workarounds were added before the GPUs were released, so the workaround likely didn't target these specifically. Use 780 MHz (the maximum SCLK according to the VBIOS on the Radeon 430). Note that the Radeon 520 VBIOS has a higher maximum SCLK: 905 MHz, but in practice it doesn't seem to perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
--- drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c +12 -1
@@ -2281,6 +2281,12 @@ static int si_populate_smc_tdp_limits(struct amdgpu_device *adev,if (ret)return ret; +if (adev->pdev->device ==0x6611 && adev->pdev->revision ==0x87 ) { +/* Workaround buggy powertune on Radeon 430 and 520. */ + tdp_limit =32 ; + near_tdp_limit =28 ; + } + smc_table->dpm2Params.TDPLimit =cpu_to_be32 (si_scale_power_for_smc (tdp_limit, scaling_factor) *1000 ); smc_table->dpm2Params.NearTDPLimit =
@@ -3463,10 +3469,15 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, (adev->pdev->revision ==0x80 ) || (adev->pdev->revision ==0x81 ) || (adev->pdev->revision ==0x83 ) || - (adev->pdev->revision == 0x87) || + (adev->pdev->revision ==0x87 && + adev->pdev->device !=0x6611 ) || (adev->pdev->device ==0x6604 ) || (adev->pdev->device == 0x6605)) { max_sclk = 75000; + }else if (adev->pdev->revision ==0x87 && + adev->pdev->device ==0x6611 ) { +/* Radeon 430 and 520 */ + max_sclk =78000 ; } }
Signature · 1 line
2.52.0
PATCH 4/5 drm/amd/pm: Return -EOPNOTSUPP when can't read power limit
In reply to Timur KristófSo that hwmon_attributes_visible() will see that the power2_cap attributes should not be visible on GPUs that don't support the get_power_limit() function.
This fixes an error when running the "sensors" command on SI.
--- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/pm/amdgpu_dpm.c +1 -1
@@ -1569,7 +1569,7 @@ int amdgpu_dpm_get_power_limit(struct amdgpu_device *adev,int ret =0 ;if (!pp_funcs->get_power_limit) -return -ENODATA ; +return -EOPNOTSUPP ;mutex_lock (&adev->pm.mutex); ret = pp_funcs->get_power_limit(adev->powerplay.pp_handle,
Signature · 1 line
2.52.0
PATCH 5/5 drm/amd/pm: Correct comment above power2_cap attributes
In reply to Timur KristófPreviously only Van Gogh supported this, but that is not true anymore since:
commit f9005c8896f8 ("drm/amd/pm: Expose ppt1 limit for gc_v9_5_0")
Update the comment to reflect that.
--- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/pm/amdgpu_pm.c +1 -1
@@ -3879,7 +3879,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj, attr == &sensor_dev_attr_temp3_emergency.dev_attr.attr))return 0 ; -/* only Vangogh has fast PPT limit and power labels */ +/* only a few GPUs have fast PPT limit and power labels */ if ((attr == &sensor_dev_attr_power2_cap_max.dev_attr.attr || attr == &sensor_dev_attr_power2_cap_min.dev_attr.attr || attr == &sensor_dev_attr_power2_cap.dev_attr.attr ||
Signature · 1 line
2.52.0
Re: [PATCH 5/5] drm/amd/pm: Correct comment above power2_cap attributes
Series is:
I'll pull them in today.
Thanks!
Quoted 28 lines · Timur Kristóf
Previously only Van Gogh supported this, but that is not true anymore since:
commitf9005c8896f8("drm/amd/pm: Expose ppt1 limit forgc_v9_5_0")Update the comment to reflect that.
Signed-off-by Timur Kristóf <[email protected]>--- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/amd/pm/amdgpu_pm.c +1
-2@@ -3879,7 +3879,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj, attr == &sensor_dev_attr_temp3_emergency.dev_attr.attr))return 0 ; -/* only Vangogh has fast PPT limit and power labels */ +/* only a few GPUs have fast PPT limit and power labels */ if ((attr == &sensor_dev_attr_power2_cap_max.dev_attr.attr || attr == &sensor_dev_attr_power2_cap_min.dev_attr.attr || attr == &sensor_dev_attr_power2_cap.dev_attr.attr || --2.52.0