Skip to contentSkip to conversation

linux-firmware: update Aeonsemi AS21x1x firmware to 1.9.1

PATCH In review Christian Marangi 4 participants 4 messages Jan 20 – Feb 2 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 linux-firmware: update Aeonsemi AS21x1x firmware to 1.9.1

Update Aeonsemi AS21x1x firmware to version 1.9.1

This new version introduce new command to configure the DPC Rate Adaption to better configure the In Band support.

Also introduce some fixup for some specific scenario:

- 10G performance is optimized for unstandard RJ45 with WIFI filter
- 100meter 10G performance is improved for setup of serial resistor on MDI trace
- Auto crossover in force 100M mode / parallel detection issue fixed

(quoted from Aeonsemi release notice)

---
 aeonsemi/as21x1x_fw.bin | Bin 261400 -> 290272 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)
aeonsemi/as21x1x_fw.bin binary +0 -0
index 64fd2fd2b349d29f946339ee0139e901bbd578cf..aae8a03dd01328b978146cd4cf4fdfcca37d7262 100644
GIT binary patch
Signature · 1 line
2.51.0
#1 lore raw
Quoted 5 lines · Christian Marangi

Update Aeonsemi AS21x1x firmware to version 1.9.1

This new version introduce new command to configure the DPC Rate Adaption to better configure the In Band support.

Quoted 7 lines

Also introduce some fixup for some specific scenario:

- 10G performance is optimized for unstandard RJ45 with WIFI filter
- 100meter 10G performance is improved for setup of serial resistor on MDI trace
- Auto crossover in force 100M mode / parallel detection issue fixed

(quoted from Aeonsemi release notice)

Can we please get Aeonsemi's ack on these changes? I CC'd Ryan Huang.

Quoted 5 lines
---
 aeonsemi/as21x1x_fw.bin | Bin 261400 -> 290272 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)
Signature · 2 lines
With best wishes
Dmitry

A message that is not in the archive (sent off-list or not yet received): CA+_ehUy-9Gd8x81btYdq1sRpKtGv8BuynbFJz6tTg655pba8Rw@mail.gmail.com

#3 lore raw

Hi all,

Yes. this patch is intentionally contributed to the linux-firmware repo and there is an upstream driver submitted to the Linux kernel that would load this firmware. thanks.

Best Regards,

Ryan Huang

+86-15366006084

________________________________
发件人: Christian Marangi (Ansuel) <[email protected]>
已发送: 2026 年 1 月 28 日 星期三 10:29
收件人: Ryan Huang <[email protected]>
主题: Fwd: [PATCH] linux-firmware: update Aeonsemi AS21x1x firmware to 1.9.1

Quoted 5 lines · Christian Marangi

Update Aeonsemi AS21x1x firmware to version 1.9.1

This new version introduce new command to configure the DPC Rate Adaption to better configure the In Band support.

Quoted 7 lines

Also introduce some fixup for some specific scenario:

- 10G performance is optimized for unstandard RJ45 with WIFI filter
- 100meter 10G performance is improved for setup of serial resistor on MDI trace
- Auto crossover in force 100M mode / parallel detection issue fixed

(quoted from Aeonsemi release notice)

Can we please get Aeonsemi's ack on these changes? I CC'd Ryan Huang.

Quoted 5 lines
---
 aeonsemi/as21x1x_fw.bin | Bin 261400 -> 290272 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)

--
With best wishes
Dmitry

#4 lore raw

Merged and pushed out.

https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/874

josh

Quoted 48 lines · Ryan Huang

Hi all,

Yes. this patch is intentionally contributed to the linux-firmware repo and there is an upstream driver submitted to the Linux kernel that would load this firmware. thanks.

Best Regards,

Ryan Huang

+86-15366006084

________________________________
发件人: Christian Marangi (Ansuel) <[email protected]>
已发送: 2026 年 1 月 28 日 星期三 10:29
收件人: Ryan Huang <[email protected]>
主题: Fwd: [PATCH] linux-firmware: update Aeonsemi AS21x1x firmware to 1.9.1

Quoted 5 lines · Christian Marangi

Update Aeonsemi AS21x1x firmware to version 1.9.1

This new version introduce new command to configure the DPC Rate Adaption to better configure the In Band support.

Quoted 7 lines

Also introduce some fixup for some specific scenario:

- 10G performance is optimized for unstandard RJ45 with WIFI filter
- 100meter 10G performance is improved for setup of serial resistor on MDI trace
- Auto crossover in force 100M mode / parallel detection issue fixed

(quoted from Aeonsemi release notice)

Can we please get Aeonsemi's ack on these changes? I CC'd Ryan Huang.

Quoted 5 lines
---
 aeonsemi/as21x1x_fw.bin | Bin 261400 -> 290272 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)

--
With best wishes
Dmitry