Skip to contentSkip to conversation

dt-bindings: leds: Convert ti,lm3697 to DT schema

PATCH Applied Rob Herring (Arm) 2 participants 2 messages Jan 21 – Feb 4

Subsystems (2)
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: leds: Convert ti,lm3697 to DT schema

Convert the TI LM3697 LED driver binding to DT schema format. It's a straight-forward conversion.

---
 .../devicetree/bindings/leds/leds-lm3697.txt  |  73 ----------
 .../devicetree/bindings/leds/ti,lm3697.yaml   | 125 ++++++++++++++++++
 2 files changed, 125 insertions(+), 73 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3697.yaml
Documentation/devicetree/bindings/leds/leds-lm3697.txt deleted +0 -73
deleted file mode 100644
index 221b37b6049b..000000000000
@@ -1,73 +0,0 @@
-* Texas Instruments - LM3697 Highly Efficient White LED Driver
-
-The LM3697 11-bit LED driver provides high-
-performance backlight dimming for 1, 2, or 3 series
-LED strings while delivering up to 90% efficiency.
-
-This device is suitable for display and keypad lighting
-
-Required properties:
-	- compatible:
-		"ti,lm3697"
-	- reg :  I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : GPIO pin to enable/disable the device
-	- vled-supply : LED supply
-
-Required child properties:
-	- reg : 0 - LED is Controlled by bank A
-		1 - LED is Controlled by bank B
-	- led-sources : Indicates which HVLED string is associated to which
-			control bank.  This is a zero based property so
-			HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
-			Additional information is contained
-			in Documentation/devicetree/bindings/leds/common.txt
-
-Optional child properties:
-	- ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt
-	- ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
-	- ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
-controlled by control bank B.
-
-led-controller@36 {
-	compatible = "ti,lm3697";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x36>;
-
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-
-	led@0 {
-		reg = <0>;
-		led-sources = <0 2>;
-		ti,brightness-resolution = <2047>;
-		ramp-up-us = <5000>;
-		ramp-down-us = <1000>;
-		label = "white:first_backlight_cluster";
-		linux,default-trigger = "backlight";
-	};
-
-	led@1 {
-		reg = <1>;
-		led-sources = <1>;
-		ti,brightness-resolution = <255>;
-		ramp-up-us = <500>;
-		ramp-down-us = <1000>;
-		label = "white:second_backlight_cluster";
-		linux,default-trigger = "backlight";
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/lit/ds/symlink/lm3697.pdf
Documentation/devicetree/bindings/leds/ti,lm3697.yaml new file +125 -0

125 lines not on this page · raw message

Signature · 1 line
2.51.0
maintainer Applied
#1 lore raw

Re: (subset) [PATCH] dt-bindings: leds: Convert ti,lm3697 to DT schema

Quoted 4 lines · Rob Herring (Arm)

Convert the TI LM3697 LED driver binding to DT schema format. It's a straight-forward conversion.

Applied, thanks!

[1/1] dt-bindings: leds: Convert ti,lm3697 to DT schema

      commit: b2c87f5e98cd88095dbc6802197526703d5e4e48

--
Lee Jones [李琼斯]