Skip to contentSkip to conversation

ASoC: dt-bindings: Convert ti,tas2552 to DT schema

PATCH In review Rob Herring (Arm) 2 participants 2 messages Jan 21 – Jan 26

Subsystems (4)
Device tree bindings Sound ASoC Texas Instruments audio (ASoC/HDA) drivers
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 ASoC: dt-bindings: Convert ti,tas2552 to DT schema

Convert the TI TAS2552 codec binding to DT schema format. It's a straight-forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../devicetree/bindings/sound/tas2552.txt     | 36 -----------
 .../devicetree/bindings/sound/ti,tas2552.yaml | 62 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 63 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2552.txt
 create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2552.yaml
Documentation/devicetree/bindings/sound/tas2552.txt deleted +0 -36
deleted file mode 100644
index a7eecad83db1..000000000000
@@ -1,36 +0,0 @@
-Texas Instruments - tas2552 Codec module
-
-The tas2552 serial control bus communicates through I2C protocols
-
-Required properties:
-	- compatible - One of:
-		"ti,tas2552" - TAS2552
-	- reg -  I2C slave address: it can be 0x40 if ADDR pin is 0
-				    or 0x41 if ADDR pin is 1.
-	- supply-*: Required supply regulators are:
-		"vbat"		battery voltage
-		"iovdd"		I/O Voltage
-		"avdd"		Analog DAC Voltage
-
-Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device
-
-tas2552 can receive its reference clock via MCLK, BCLK, IVCLKIN pin or use the
-internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM
-reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK.
-For system integration the dt-bindings/sound/tas2552.h header file provides
-defined values to select and configure the PLL and PDM reference clocks.
-
-Example:
-
-tas2552: tas2552@41 {
-	compatible = "ti,tas2552";
-	reg = <0x41>;
-	vbat-supply = <&reg_vbat>;
-	iovdd-supply = <&reg_iovdd>;
-	avdd-supply = <&reg_avdd>;
-	enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-};
-
-For more product information please see the link below:
-https://www.ti.com/product/TAS2552
Documentation/devicetree/bindings/sound/ti,tas2552.yaml new file +62 -0

62 lines not on this page · raw message

MAINTAINERS +1 -1
index 332ddd3ea7eb..6ab9534ed263 100644
@@ -25989,7 +25989,7 @@ M:	Kevin Lu <[email protected]>
 M:	Baojun Xu <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	Documentation/devicetree/bindings/sound/tas2552.txt
+F:	Documentation/devicetree/bindings/sound/ti,tas2552.yaml
 F:	Documentation/devicetree/bindings/sound/ti,tas2562.yaml
 F:	Documentation/devicetree/bindings/sound/ti,tas2770.yaml
 F:	Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
Signature · 1 line
2.51.0
maintainer
#1 lore raw
Quoted 4 lines · Rob Herring (Arm)

Convert the TI TAS2552 codec binding to DT schema format. It's a straight-forward conversion.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: Convert ti,tas2552 to DT schema

      commit: 506e0825a4c9b251d141f0f31c6cde1bdc2983ff

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark