i2c: designware-platdrv: simplify reset control
Subsystems (3)
PATCH v5 1/2 i2c: designware-platdrv: simplify reset control
The current implementation uses separate calls to acquire and deassert reset control, requiring manual error handling for the deassertion operation. This can be simplified using the dedicated devm function that combines both operations.
Replace devm_reset_control_get_optional_exclusive() with devm_reset_control_get_optional_exclusive_deasserted(), which handles both reset acquisition and deassertion in a single call as well as reset_control_put() which is called automatically on driver detach. This eliminates the need for explicit deassertion and its associated error checking while maintaining the same functional behavior through automatic resource management.
Signed-off-by Artem Shimko <[email protected]>
--- drivers/i2c/busses/i2c-designware-platdrv.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +1 -3
@@ -227,12 +227,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)if (ret)return ret; - dev->rst =devm_reset_control_get_optional_exclusive (device,NULL ); + dev->rst =devm_reset_control_get_optional_exclusive_deasserted (device,NULL );if (IS_ERR (dev->rst))return dev_err_probe (device,PTR_ERR (dev->rst),"failed to acquire reset\n" ); -reset_control_deassert (dev->rst); - ret =i2c_dw_fw_parse_and_configure (dev);if (ret) goto exit_reset;
Signature · 1 line
2.43.0