Skip to contentSkip to conversation

FAILED: patch "[PATCH] mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in" failed to apply to 6.1-stable tree

PATCH New [email protected] 2 participants 3 messages Jan 27 – Jan 28

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 3009738a855cf938bbfc9078bec725031ae623a4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026012749-barrier-oppressor-3ac6@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3009738a855cf938bbfc9078bec725031ae623a4 Mon Sep 17 00:00:00 2001
From: Shawn Lin <[email protected]>
Date: Mon, 22 Dec 2025 15:11:25 +0800
Subject: [PATCH] mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in
HS200/HS400 mode

When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes.

Add a check to prevent illegal clock reduction through debugfs:

root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock
root@debian:/# [   30.090146] mmc0: running CQE recovery
mmc0: cqhci: Failed to halt
mmc0: cqhci: spurious TCN for tag 0
WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24
Modules linked in:
CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT
Hardware name: Rockchip RK3588 EVB1 V10 Board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cqhci_irq+0x254/0x818
lr : cqhci_irq+0x254/0x818
...
Fixes c6f361cba51c ("mmc: sdhci-of-dwcmshc: add support for rk3588")
Cc Sebastian Reichel <[email protected]>
Cc Yifeng Zhao <[email protected]>
drivers/mmc/host/sdhci-of-dwcmshc.c +7 -0
index 51949cde0958..204830b40587 100644
@@ -739,6 +739,13 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
+		if (host->mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+		    host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+			dev_err(mmc_dev(host->mmc),
+				"Can't reduce the clock below 52MHz in HS200/HS400 mode");
+			return;
+		}
+
 		/*
 		 * Disable DLL and reset both of sample and drive clock.
 		 * The bypass bit and start bit need to be set if DLL is not locked.
maintainer
#1 lore raw

PATCH 1/2 mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform

From: Shawn Lin <[email protected]>

[ Upstream commit b75a52b0dda353aeefb4830a320589a363f49579 ]

For Rockchip platform, DLL bypass bit and start bit need to be set if DLL is not locked. And adjust pre-change delay to 0x3 for better signal test result.

Stable-dep-of: 3009738a855c ("mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode")

---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/mmc/host/sdhci-of-dwcmshc.c +9 -4
index b07c737593555..19376bee9ec13 100644
@@ -48,6 +48,7 @@
 #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL	29
 #define DWCMSHC_EMMC_DLL_START_POINT	16
 #define DWCMSHC_EMMC_DLL_INC		8
+#define DWCMSHC_EMMC_DLL_BYPASS		BIT(24)
 #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
 #define DLL_TXCLK_TAPNUM_DEFAULT	0x10
 #define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
@@ -60,6 +61,7 @@
 #define DLL_RXCLK_NO_INVERTER		1
 #define DLL_RXCLK_INVERTER		0
 #define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
+#define DLL_RXCLK_ORI_GATE		BIT(31)
 #define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
 #define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
 #define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
-		/* Disable DLL and reset both of sample and drive clock */
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
+		/*
+		 * Disable DLL and reset both of sample and drive clock.
+		 * The bypass bit and start bit need to be set if DLL is not locked.
+		 */
+		sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
+		sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
 		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
 		/*
@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	}
 
 	extra = 0x1 << 16 | /* tune clock stop en */
-		0x2 << 17 | /* pre-change delay */
+		0x3 << 17 | /* pre-change delay */
 		0x3 << 19;  /* post-change delay */
 	sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
 
Signature · 1 line
2.51.0
maintainer
#2 lore raw

PATCH 2/2 mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode

From: Shawn Lin <[email protected]>

[ Upstream commit 3009738a855cf938bbfc9078bec725031ae623a4 ]

When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes.

Add a check to prevent illegal clock reduction through debugfs:

root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock
root@debian:/# [   30.090146] mmc0: running CQE recovery
mmc0: cqhci: Failed to halt
mmc0: cqhci: spurious TCN for tag 0
WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24
Modules linked in:
CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT
Hardware name: Rockchip RK3588 EVB1 V10 Board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cqhci_irq+0x254/0x818
lr : cqhci_irq+0x254/0x818
...
Fixes c6f361cba51c ("mmc: sdhci-of-dwcmshc: add support for rk3588")
Cc Sebastian Reichel <[email protected]>
Cc Yifeng Zhao <[email protected]>
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/mmc/host/sdhci-of-dwcmshc.c +7 -0
index 19376bee9ec13..aa68c63f70243 100644
@@ -236,6 +236,13 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
+		if (host->mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+		    host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+			dev_err(mmc_dev(host->mmc),
+				"Can't reduce the clock below 52MHz in HS200/HS400 mode");
+			return;
+		}
+
 		/*
 		 * Disable DLL and reset both of sample and drive clock.
 		 * The bypass bit and start bit need to be set if DLL is not locked.
Signature · 1 line
2.51.0