Skip to contentSkip to conversation

bpf: verifier: Improve state pruning for scalar registers

PATCH Superseded Puranjay Mohan 2 participants 8 messages Feb 2

Subsystems (4)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover bpf: verifier: Improve state pruning for scalar registers

This series improves BPF verifier state pruning by relaxing scalar ID equivalence requirements. Scalar register IDs are used to track relationships between registers for bounds propagation. However, once an ID becomes "singular" (only one register/stack slot carries it), it can no longer participate in bounds propagation and becomes stale. These stale IDs can prevent pruning of otherwise equivalent states.

The series addresses this in four patches:

Patch 1: Assign IDs on stack fills to ensure stack slots have IDs before being read into registers, preparing for the singular ID clearing in patch 2.

Patch 2: Clear IDs that appear only once before caching, as they cannot contribute to bounds propagation.

Patch 3: Relax maybe_widen_reg() to only compare value-tracking fields (bounds, tnum, var_off) rather than also requiring ID matches. Two scalars with identical value constraints but different IDs represent the same abstract value and don't need widening.

Patch 4: Relax scalar ID equivalence in state comparison by treating rold->id == 0 as "independent". If the old state didn't rely on ID relationships for a register, any linking in the current state only adds constraints and is safe to accept for pruning.

I ran veristat on BPF programs from sched_ext, meta's internal programs, and on selftest programs, showing programs with insn diff > 5%:

Scx Progs

File                Program              States (A)  States (B)  States (DIFF)  Insns (A)  Insns (B)  Insns    (DIFF)
------------------  -------------------  ----------  ----------  -------------  ---------  ---------  ---------------
scx_rusty.bpf.o     rusty_set_cpumask           320         230  -90 (-28.12%)       4478       3259  -1219 (-27.22%)
scx_bpfland.bpf.o   bpfland_select_cpu           55          49   -6 (-10.91%)        691        618    -73 (-10.56%)
scx_beerland.bpf.o  beerland_select_cpu          27          25    -2 (-7.41%)        320        295     -25 (-7.81%)
scx_p2dq.bpf.o      p2dq_init                   265         250   -15 (-5.66%)       3423       3233    -190 (-5.55%)
scx_layered.bpf.o   layered_enqueue            1461        1386   -75 (-5.13%)      14541      13792    -749 (-5.15%)

FB Progs

File          Program              States (A)  States (B)  States  (DIFF)  Insns (A)  Insns (B)  Insns    (DIFF)
------------  -------------------  ----------  ----------  --------------  ---------  ---------  ---------------
bpf007.bpf.o  bpfj_free                  1726        1342  -384 (-22.25%)      25671      19096  -6575 (-25.61%)
bpf041.bpf.o  armr_net_block_init       22373       20411  -1962 (-8.77%)     651697     602873  -48824 (-7.49%)
bpf227.bpf.o  layered_quiescent            28          26     -2 (-7.14%)        365        340     -25 (-6.85%)
bpf248.bpf.o  p2dq_init                   263         248    -15 (-5.70%)       3370       3159    -211 (-6.26%)
bpf254.bpf.o  p2dq_init                   263         248    -15 (-5.70%)       3388       3177    -211 (-6.23%)
bpf241.bpf.o  p2dq_init                   264         249    -15 (-5.68%)       3428       3240    -188 (-5.48%)
bpf230.bpf.o  p2dq_init                   287         271    -16 (-5.57%)       3666       3431    -235 (-6.41%)
bpf251.bpf.o  lavd_cpu_offline            321         316     -5 (-1.56%)       6221       5891    -330 (-5.30%)
bpf251.bpf.o  lavd_cpu_online             321         316     -5 (-1.56%)       6219       5889    -330 (-5.31%)

Selftest Progs

File                                Program            States (A)  States (B)  States (DIFF)  Insns (A)  Insns (B)  Insns    (DIFF)
----------------------------------  -----------------  ----------  ----------  -------------  ---------  ---------  ---------------
verifier_iterating_callbacks.bpf.o  test2                       4           2   -2 (-50.00%)         29         18    -11 (-37.93%)
verifier_iterating_callbacks.bpf.o  test3                       4           2   -2 (-50.00%)         31         19    -12 (-38.71%)
strobemeta_bpf_loop.bpf.o           on_event                  318         221  -97 (-30.50%)       3938       2755  -1183 (-30.04%)
bpf_qdisc_fq.bpf.o                  bpf_fq_dequeue            133         105  -28 (-21.05%)       1686       1385   -301 (-17.85%)
iters.bpf.o                         delayed_read_mark           6           5   -1 (-16.67%)         60         46    -14 (-23.33%)
arena_strsearch.bpf.o               arena_strsearch           107         106    -1 (-0.93%)       1394       1258    -136 (-9.76%)

Puranjay Mohan (4):
bpf: verifier: Assign ids on stack fills
bpf: verifier: Clear singular ids for scalars
bpf: verifier: relax maybe_widen_reg() constraints
bpf: verifier: Relax scalar id equivalence for state pruning

 include/linux/bpf_verifier.h                  |   7 +-
 kernel/bpf/verifier.c                         | 169 ++++++++++++++++--
 .../selftests/bpf/progs/verifier_scalar_ids.c |   8 +-
 3 files changed, 160 insertions(+), 24 deletions(-)

base-commit: 4bebb99140c7b6ee6d894c40557f938804fa8693

Signature · 1 line
2.47.3
#1 lore raw

PATCH 1/4 bpf: verifier: Assign ids on stack fills

The next commit will allow clearing of scalar ids if no other register/stack slot has that id. This is because if only one register has a unique id, it can't participate in bounds propagation and is equivalent to having no id.

But if the id of a stack slot is cleared by clear_singular_ids() in the next commit, reading that stack slot into a register will not establish a link because the stack slot's id is cleared.

This can happen in a situation where a register is spilled and later loses its id due to a multiply operation (for example) and then the stack slot's id becomes singular and can be cleared.

Make sure that scalar stack slots have an id before we read them into a register.

---
 kernel/bpf/verifier.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
kernel/bpf/verifier.c +11 -0
index 6b62b6d57175..17b499956156 100644
@@ -5518,6 +5518,12 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 				 */
 				s32 subreg_def = state->regs[dst_regno].subreg_def;
 
+				if (env->bpf_capable && size == 4 && spill_size == 4 &&
+				    get_reg_width(reg) <= 32)
+					/* Ensure stack slot has an ID to build a relation
+					 * with the destination register on fill.
+					 */
+					assign_scalar_id_before_mov(env, reg);
 				copy_register_state(&state->regs[dst_regno], reg);
 				state->regs[dst_regno].subreg_def = subreg_def;
 
@@ -5563,6 +5569,11 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 			}
 		} else if (dst_regno >= 0) {
 			/* restore register state from stack */
+			if (env->bpf_capable)
+				/* Ensure stack slot has an ID to build a relation
+				 * with the destination register on fill.
+				 */
+				assign_scalar_id_before_mov(env, reg);
 			copy_register_state(&state->regs[dst_regno], reg);
 			/* mark reg as written since spilled pointer state likely
 			 * has its liveness marks cleared by is_state_visited()
Signature · 1 line
2.47.3
#3 lore raw

PATCH 2/4 bpf: verifier: Clear singular ids for scalars

In reply to Puranjay Mohan

Verifier assigns ids to scalar registers/stack slots when they are linked through a mov or stack spill/fill instruction. These ids are later used to progagate newly found bounds to from one register to all registers that share the same id. The verifier also compares the ids of these registers in current state and cached state when making pruning decisions.

When an ID becomes singular (i.e., only a single register or stack slot has that ID), it can no longer participate in bounds propagation. During comparisons between current and cached states for pruning decisions, however, such stale IDs can prevent pruning of otherwise equivalent states.

Find and clear all singular ids before caching a state in is_state_visited(). struct bpf_idset which is currently unused has been repurposed for this use case.

---
 include/linux/bpf_verifier.h |  7 +++-
 kernel/bpf/verifier.c        | 75 ++++++++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+), 2 deletions(-)
include/linux/bpf_verifier.h +5 -2
index 8355b585cd18..746025df82c8 100644
@@ -697,8 +697,11 @@ struct bpf_idmap {
 };
 
 struct bpf_idset {
-	u32 count;
-	u32 ids[BPF_ID_MAP_SIZE];
+	u32 num_ids;
+	struct {
+		u32 id;
+		u32 cnt;
+	} entries[BPF_ID_MAP_SIZE];
 };
 
 /* see verifier.c:compute_scc_callchain() */
kernel/bpf/verifier.c +75 -0

87 lines not on this page · raw message

Signature · 1 line
2.47.3
#5 lore raw

PATCH 3/4 bpf: verifier: relax maybe_widen_reg() constraints

In reply to Puranjay Mohan

The maybe_widen_reg() function widens imprecise scalar registers to unknown when their values differ between the cached and current states. Previously, it used regs_exact() which also compared register IDs via check_ids(), requiring registers to have matching IDs (or mapped IDs) to be considered exact.

For scalar widening purposes, what matters is whether the value tracking (bounds, tnum, var_off) is the same, not whether the IDs match. Two scalars with identical value constraints but different IDs represent the same abstract value and don't need to be widened.

Introduce scalars_exact_for_widen() that only compares the value-tracking portion of bpf_reg_state (fields before 'id'). This allows the verifier to preserve more scalar value information during state merging when IDs differ but actual tracked values are identical, reducing unnecessary widening and potentially improving verification precision.

---
 kernel/bpf/verifier.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)
kernel/bpf/verifier.c +13 -7
index 9324d96aae92..9c14dbe7c10d 100644
@@ -8995,15 +8995,23 @@ static bool regs_exact(const struct bpf_reg_state *rold,
 		       const struct bpf_reg_state *rcur,
 		       struct bpf_idmap *idmap);
 
+/* Check if scalar registers are exact for the purpose of not widening.
+ * More lenient than regs_exact()
+ */
+static bool scalars_exact_for_widen(const struct bpf_reg_state *rold,
+				    const struct bpf_reg_state *rcur)
+{
+	return !memcmp(rold, rcur, offsetof(struct bpf_reg_state, id));
+}
+
 static void maybe_widen_reg(struct bpf_verifier_env *env,
-			    struct bpf_reg_state *rold, struct bpf_reg_state *rcur,
-			    struct bpf_idmap *idmap)
+			    struct bpf_reg_state *rold, struct bpf_reg_state *rcur)
 {
 	if (rold->type != SCALAR_VALUE)
 		return;
 	if (rold->type != rcur->type)
 		return;
-	if (rold->precise || rcur->precise || regs_exact(rold, rcur, idmap))
+	if (rold->precise || rcur->precise || scalars_exact_for_widen(rold, rcur))
 		return;
 	__mark_reg_unknown(env, rcur);
 }
@@ -9023,8 +9031,7 @@ static int widen_imprecise_scalars(struct bpf_verifier_env *env,
 		for (i = 0; i < MAX_BPF_REG; i++)
 			maybe_widen_reg(env,
 					&fold->regs[i],
-					&fcur->regs[i],
-					&env->idmap_scratch);
+					&fcur->regs[i]);
 
 		num_slots = min(fold->allocated_stack / BPF_REG_SIZE,
 				fcur->allocated_stack / BPF_REG_SIZE);
@@ -9035,8 +9042,7 @@ static int widen_imprecise_scalars(struct bpf_verifier_env *env,
 
 			maybe_widen_reg(env,
 					&fold->stack[i].spilled_ptr,
-					&fcur->stack[i].spilled_ptr,
-					&env->idmap_scratch);
+					&fcur->stack[i].spilled_ptr);
 		}
 	}
 	return 0;
Signature · 1 line
2.47.3
#6 lore raw

PATCH 4/4 bpf: verifier: Relax scalar id equivalence for state pruning

In reply to Puranjay Mohan

Scalar register IDs are used by the verifier to track relationships between registers and enable bounds propagation across those relationships. Once an ID becomes singular (i.e. only a single register/stack slot carries it), it can no longer contribute to bounds propagation and effectively becomes stale. The previous commit makes the verifier clear such ids before caching the state.

When comparing the current and cached states for pruning, these stale IDs can cause technically equivalent states to be considered different and thus prevent pruning.

Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register, then any ID/linking present in the current state only adds constraints and is always safe to accept for pruning. Implement this by returning true immediately in check_scalar_ids() when old_id == 0.

Maintain correctness for the opposite direction (old_id != 0 && cur_id == 0) by still allocating a temporary ID for cur_id == 0. This avoids incorrectly allowing multiple independent current registers (id==0) to satisfy a single linked old ID during mapping.

---
 kernel/bpf/verifier.c                         | 63 +++++++++++++++----
 .../selftests/bpf/progs/verifier_scalar_ids.c |  8 ++-
 2 files changed, 56 insertions(+), 15 deletions(-)
kernel/bpf/verifier.c +51 -12
index 9c14dbe7c10d..65c499867566 100644
@@ -19387,13 +19387,29 @@ static bool check_ids(u32 old_id, u32 cur_id, struct bpf_idmap *idmap)
 	return false;
 }
 
-/* Similar to check_ids(), but allocate a unique temporary ID
- * for 'old_id' or 'cur_id' of zero.
- * This makes pairs like '0 vs unique ID', 'unique ID vs 0' valid.
+/*
+ * Compare scalar register IDs for state equivalence.
+ *
+ * When old_id == 0, the old register is independent - not linked to any
+ * other register. Any linking in the current state only adds constraints,
+ * making it more restrictive. Since the old state didn't rely on any ID
+ * relationships for this register, it's always safe to accept cur regardless
+ * of its ID. Hence, return true immediately.
+ *
+ * When old_id != 0 but cur_id == 0, we need to ensure that different
+ * independent registers in cur don't incorrectly satisfy the ID matching
+ * requirements of linked registers in old.
+ *
+ * Example: if old has r6.id=X and r7.id=X (linked), but cur has r6.id=0
+ * and r7.id=0 (both independent), without temp IDs both would map old_id=X
+ * to cur_id=0 and pass. With temp IDs: r6 maps X->temp1, r7 tries to map
+ * X->temp2, but X is already mapped to temp1, so the check fails correctly.
  */
 static bool check_scalar_ids(u32 old_id, u32 cur_id, struct bpf_idmap *idmap)
 {
-	old_id = old_id ? old_id : ++idmap->tmp_id_gen;
+	if (!old_id)
+		return true;
+
 	cur_id = cur_id ? cur_id : ++idmap->tmp_id_gen;
 
 	return check_ids(old_id, cur_id, idmap);
@@ -19624,11 +19640,21 @@ static bool regsafe(struct bpf_verifier_env *env, struct bpf_reg_state *rold,
 		}
 		if (!rold->precise && exact == NOT_EXACT)
 			return true;
-		if ((rold->id & BPF_ADD_CONST) != (rcur->id & BPF_ADD_CONST))
-			return false;
-		if ((rold->id & BPF_ADD_CONST) && (rold->off != rcur->off))
-			return false;
-		/* Why check_ids() for scalar registers?
+		/*
+		 * Linked register tracking uses rold->id to detect relationships.
+		 * When rold->id == 0, the register is independent and any linking
+		 * in rcur only adds constraints. When rold->id != 0, we must verify
+		 * id mapping and (for BPF_ADD_CONST) offset consistency.
+		 *
+		 * +------------------+-----------+------------------+---------------+
+		 * |                  | rold->id  | rold + ADD_CONST | rold->id == 0 |
+		 * |------------------+-----------+------------------+---------------|
+		 * | rcur->id         | range,ids | false            | range         |
+		 * | rcur + ADD_CONST | false     | range,ids,off    | range         |
+		 * | rcur->id == 0    | range,ids | false            | range         |
+		 * +------------------+-----------+------------------+---------------+
+		 *
+		 * Why check_ids() for scalar registers?
 		 *
 		 * Consider the following BPF code:
 		 *   1: r6 = ... unbound scalar, ID=a ...
@@ -19652,9 +19678,22 @@ static bool regsafe(struct bpf_verifier_env *env, struct bpf_reg_state *rold,
 		 * ---
 		 * Also verify that new value satisfies old value range knowledge.
 		 */
-		return range_within(rold, rcur) &&
-		       tnum_in(rold->var_off, rcur->var_off) &&
-		       check_scalar_ids(rold->id, rcur->id, idmap);
+
+		/* ADD_CONST mismatch: different linking semantics */
+		if ((rold->id & BPF_ADD_CONST) && !(rcur->id & BPF_ADD_CONST))
+			return false;
+
+		if (rold->id && !(rold->id & BPF_ADD_CONST) && (rcur->id & BPF_ADD_CONST))
+			return false;
+
+		/* Both have offset linkage: offsets must match */
+		if ((rold->id & BPF_ADD_CONST) && rold->off != rcur->off)
+			return false;
+
+		if (!check_scalar_ids(rold->id, rcur->id, idmap))
+			return false;
+
+		return range_within(rold, rcur) && tnum_in(rold->var_off, rcur->var_off);
 	case PTR_TO_MAP_KEY:
 	case PTR_TO_MAP_VALUE:
 	case PTR_TO_MEM:
tools/testing/selftests/bpf/progs/verifier_scalar_ids.c +5 -3
index c0ce690ddb68..c8f8820336b7 100644
@@ -723,9 +723,9 @@ __success __log_level(2)
 /* The exit instruction should be reachable from two states,
  * use two matches and "processed .. insns" to ensure this.
  */
-__msg("13: (95) exit")
-__msg("13: (95) exit")
-__msg("processed 18 insns")
+__msg("15: (95) exit")
+__msg("15: (95) exit")
+__msg("processed 20 insns")
 __flag(BPF_F_TEST_STATE_FREQ)
 __naked void two_old_ids_one_cur_id(void)
 {
@@ -734,9 +734,11 @@ __naked void two_old_ids_one_cur_id(void)
 	"call %[bpf_ktime_get_ns];"
 	"r0 &= 0xff;"
 	"r6 = r0;"
+	"r8 = r0;"
 	"call %[bpf_ktime_get_ns];"
 	"r0 &= 0xff;"
 	"r7 = r0;"
+	"r9 = r0;"
 	"r0 = 0;"
 	/* Maybe make r{6,7} IDs identical */
 	"if r6 > r7 goto l0_%=;"
Signature · 1 line
2.47.3
maintainer
#7 lore raw

Re: [PATCH bpf-next 4/4] bpf: verifier: Relax scalar id equivalence for state pruning

Quoted 17 lines · Puranjay Mohan

Scalar register IDs are used by the verifier to track relationships between registers and enable bounds propagation across those relationships. Once an ID becomes singular (i.e. only a single register/stack slot carries it), it can no longer contribute to bounds propagation and effectively becomes stale. The previous commit makes the verifier clear such ids before caching the state.

When comparing the current and cached states for pruning, these stale IDs can cause technically equivalent states to be considered different and thus prevent pruning.

Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register, then any ID/linking present in the current state only adds constraints and is always safe to accept for pruning. Implement this by returning true immediately in check_scalar_ids() when old_id == 0.

Quoted 7 lines

Maintain correctness for the opposite direction (old_id != 0 && cur_id == 0) by still allocating a temporary ID for cur_id == 0. This avoids incorrectly allowing multiple independent current registers (id==0) to satisfy a single linked old ID during mapping.

---

Could you please describe the exact ADD_CONST scenario, when old scheme treated singular ids non-optimally? Otherwise it is not clear why old scheme with temporary id allocation for rold->id == 0 case is not sufficient. Also it would be nice to have this scenario in the selftests.

[...]

maintainer Acked-by on v1 1/4
#2 lore raw

Re: [PATCH bpf-next 1/4] bpf: verifier: Assign ids on stack fills

In reply to Puranjay Mohan
Quoted 13 lines · Puranjay Mohan

The next commit will allow clearing of scalar ids if no other register/stack slot has that id. This is because if only one register has a unique id, it can't participate in bounds propagation and is equivalent to having no id.

But if the id of a stack slot is cleared by clear_singular_ids() in the next commit, reading that stack slot into a register will not establish a link because the stack slot's id is cleared.

This can happen in a situation where a register is spilled and later loses its id due to a multiply operation (for example) and then the stack slot's id becomes singular and can be cleared.

Quoted 5 lines

Make sure that scalar stack slots have an id before we read them into a register.

---

[...]

maintainer Acked-by on v1 2/4
#4 lore raw

Re: [PATCH bpf-next 2/4] bpf: verifier: Clear singular ids for scalars

In reply to Puranjay Mohan
Quoted 13 lines · Puranjay Mohan

Verifier assigns ids to scalar registers/stack slots when they are linked through a mov or stack spill/fill instruction. These ids are later used to progagate newly found bounds to from one register to all registers that share the same id. The verifier also compares the ids of these registers in current state and cached state when making pruning decisions.

When an ID becomes singular (i.e., only a single register or stack slot has that ID), it can no longer participate in bounds propagation. During comparisons between current and cached states for pruning decisions, however, such stale IDs can prevent pruning of otherwise equivalent states.

Quoted 5 lines

Find and clear all singular ids before caching a state in is_state_visited(). struct bpf_idset which is currently unused has been repurposed for this use case.

It would be helpful if commit message described scenario that fails with current machinery.

Quoted 62 lines
---
 include/linux/bpf_verifier.h |  7 +++-
 kernel/bpf/verifier.c        | 75 ++++++++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+), 2 deletions(-)
include/linux/bpf_verifier.h +5 -2
index 8355b585cd18..746025df82c8 100644
@@ -697,8 +697,11 @@ struct bpf_idmap {
 };
 
 struct bpf_idset {
-	u32 count;
-	u32 ids[BPF_ID_MAP_SIZE];
+	u32 num_ids;
+	struct {
+		u32 id;
+		u32 cnt;
+	} entries[BPF_ID_MAP_SIZE];
 };
 
 /* see verifier.c:compute_scc_callchain() */
kernel/bpf/verifier.c +31 -0
index 17b499956156..9324d96aae92 100644
@@ -19461,6 +19461,78 @@ static void clean_verifier_state(struct bpf_verifier_env *env,
  * doesn't meant that the states are DONE. The verifier has to compare
  * the callsites
  */
+
+/* Find id in idset and increment its count, or add new entry */
+static void idset_cnt_inc(struct bpf_idset *idset, u32 id)
+{
+	u32 i;
+
+	for (i = 0; i < idset->num_ids; i++) {
+		if (idset->entries[i].id == id) {
+			idset->entries[i].cnt++;
+			return;
+		}
+	}
+	/* New id */
+	if (idset->num_ids < BPF_ID_MAP_SIZE) {
+		idset->entries[idset->num_ids].id = id;
+		idset->entries[idset->num_ids].cnt = 1;
+		idset->num_ids++;
+	}
+}
+
+/* Find id in idset and return its count, or 0 if not found */
+static u32 idset_cnt_get(struct bpf_idset *idset, u32 id)
+{
+	u32 i;
+
+	for (i = 0; i < idset->num_ids; i++) {
+		if (idset->entries[i].id == id)
+			return idset->entries[i].cnt;
+	}
+	return 0;
+}

kernel/bpf/verifier.c static void clean_verifier_state(struct bpf_verifier_env *env, · line 19504

Quoted 10 lines
kernel/bpf/verifier.c +10 -0
+
+/*
+ * Clear singular scalar ids in a state.
+ * A register with a non-zero id is called singular if no other register shares
+ * the same base id. Such registers can be treated as independent (id=0).
+ *
+ * Uses two passes to achieve O(N) complexity:
+ * 1. First pass: count occurrences of each unique id
+ * 2. Second pass: clear ids with count == 1 (singular)
+ */

Nit: please remove the "Uses ..." part from the comment.

Quoted 9 lines
kernel/bpf/verifier.c +9 -0
+static void clear_singular_ids(struct bpf_verifier_env *env,
+			       struct bpf_verifier_state *st)
+{
+	struct bpf_idset *idset = &env->idset_scratch;
+	struct bpf_func_state *func;
+	struct bpf_reg_state *reg;
+
+	idset->num_ids = 0;
+

kernel/bpf/verifier.c static void clean_verifier_state(struct bpf_verifier_env *env, · line 19523

Quoted 10 lines
kernel/bpf/verifier.c +10 -0
+	/* First pass: count occurrences of each unique id */
+	bpf_for_each_reg_in_vstate(st, func, reg, ({
+		if (reg->type != SCALAR_VALUE)
+			continue;
+		if (!reg->id)
+			continue;
+		idset_cnt_inc(idset, reg->id & ~BPF_ADD_CONST);
+	}));
+
+	/* Second pass: clear singular ids (count == 1) */

Nit: pass comments anre not really necessary.

Quoted 16 lines
kernel/bpf/verifier.c +12 -0
+	bpf_for_each_reg_in_vstate(st, func, reg, ({
+		if (reg->type != SCALAR_VALUE)
+			continue;
+		if (!reg->id)
+			continue;
+		if (idset_cnt_get(idset, reg->id & ~BPF_ADD_CONST) == 1) {
+			reg->id = 0;
+			reg->off = 0;
+		}
+	}));
+}
+
 static void clean_live_states(struct bpf_verifier_env *env, int insn,
 			      struct bpf_verifier_state *cur)
 {

kernel/bpf/verifier.c static int is_state_visited(struct bpf_verifier_env *env, int insn_idx) · line 20534

Quoted 4 lines
kernel/bpf/verifier.c +1 -0
@@ -20459,6 +20531,9 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
 	if (env->bpf_capable)
 		mark_all_scalars_imprecise(env, cur);
 
+	/* find singular ids and clear them */

Nit: This states the obvious. A more interesting point to note would be
that it is done before the state is copied to affect both current and the copy. But I'd drop the comment altogether.

Quoted 5 lines
kernel/bpf/verifier.c +2 -0
+	clear_singular_ids(env, cur);
+
 	/* add new state to the head of linked list */
 	new = &new_sl->state;
 	err = copy_verifier_state(new, cur);