Skip to contentSkip to conversation

Trigger reset if firmware status is abnormal when

PATCH Applied Chris Lu 3 participants 6 messages Feb 3 – Feb 11

Subsystems (2)
lore
Share & tools
lore

Chris Lu

author
#0 lore raw

cover Trigger reset if firmware status is abnormal when

When the device unexpectedly restarts during previous firmware download process, it can cause mt79xx firmware status to be abnormal in the next attempt. In this case, a reset should be performed to ensure everything starts afresh.

These changes include:
1. Optimizing the handling after the download function retry is exhausted, a reset should be performed.
2. Another download firmware command also needs to check status , and if an unexpected status occurs, trigger a reset.
3. Adding a flag "BTMTK_FIRMWARE_DL_RETRY": if download firmware process enters the reset mechanism, this flag will be set. After a successful setup, the flag will be cleared. If the flag is already set, no further reset attempts will be made to avoid endless reset retries.

Chris Lu (3):
Bluetooth: btmtk: improve mt79xx firmware setup retry flow
Bluetooth: btmtk: add status check in mt79xx firmware setup
Bluetooth: btmtk: Add reset mechanism if downloading firmware failed

 drivers/bluetooth/btmtk.c | 21 +++++++++++++++++++--
 drivers/bluetooth/btmtk.h |  1 +
 2 files changed, 20 insertions(+), 2 deletions(-)
Signature · 1 line
2.45.2
author
#1 lore raw

PATCH 1/3 Bluetooth: btmtk: improve mt79xx firmware setup retry flow

If retries are exhausted, driver should not do futher operation. During mt79xx firmware download process, if the retry count reaches0, driver will return an -EIO error and release the firmware resources.

---
 drivers/bluetooth/btmtk.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/bluetooth/btmtk.c +6 -0
index a8c520dc09e1..b0f87b04046e 100644
@@ -205,6 +205,12 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 				}
 			}
 
+			/* If retry exhausted goto err_release_fw */
+			if (retry == 0) {
+				err = -EIO;
+				goto err_release_fw;
+			}
+
 			fw_ptr += section_offset;
 			wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
 			wmt_params.status = NULL;
Signature · 1 line
2.45.2
#2 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1050104

---Test result---

Test Summary:

CheckPatch                    PENDING   0.34 seconds
GitLint                       PENDING   0.29 seconds
SubjectPrefix                 PASS      0.35 seconds
BuildKernel                   PASS      28.39 seconds
CheckAllWarning               PASS      29.50 seconds
CheckSparse                   WARNING   33.43 seconds
BuildKernel32                 PASS      26.24 seconds
TestRunnerSetup               PASS      569.51 seconds
TestRunner_l2cap-tester       PASS      29.22 seconds
TestRunner_iso-tester         FAIL      85.43 seconds
TestRunner_bnep-tester        PASS      6.51 seconds
TestRunner_mgmt-tester        FAIL      115.40 seconds
TestRunner_rfcomm-tester      PASS      9.87 seconds
TestRunner_sco-tester         FAIL      14.96 seconds
TestRunner_ioctl-tester       PASS      10.51 seconds
TestRunner_mesh-tester        FAIL      12.47 seconds
TestRunner_smp-tester         PASS      8.77 seconds
TestRunner_userchan-tester    PASS      6.84 seconds
IncrementalBuild              PENDING   0.76 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
drivers/bluetooth/btmtk.c:1507:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1507:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1507:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expression
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:

BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0

Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success Failed 0.108 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected

BUG: sleeping function called from invalid context at net/core/sock.c:3782

Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases

Mesh - Send cancel - 1                               Timed out    2.624 seconds
Mesh - Send cancel - 2                               Timed out    1.992 seconds

##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:

---
Regards,
Linux Bluetooth

author
#3 lore raw

PATCH 2/3 Bluetooth: btmtk: add status check in mt79xx firmware setup

In reply to Chris Lu

To prevent abnormal controller states, it is necessary to check status in another part of the mt79xx firmware setup. During this process, receiving the 'BTMTK_WMT_PATCH_PROGRESS' status is unexpected. If this occurs, it should be treated as an error, and driver must be prevented from continuing execution.

---
 drivers/bluetooth/btmtk.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/bluetooth/btmtk.c +8 -2
index b0f87b04046e..67db5a48c3e4 100644
@@ -213,7 +213,6 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 
 			fw_ptr += section_offset;
 			wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
-			wmt_params.status = NULL;
 
 			while (dl_size > 0) {
 				dlen = min_t(int, 250, dl_size);
@@ -231,7 +230,14 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 				wmt_params.data = fw_ptr;
 
 				err = wmt_cmd_sync(hdev, &wmt_params);
-				if (err < 0) {
+				/* Status BTMTK_WMT_PATCH_PROGRESS indicates firmware is
+				 * in process of being downloaded, which is not expected to
+				 * occur here.
+				 */
+				if (status == BTMTK_WMT_PATCH_PROGRESS) {
+					err = -EIO;
+					goto err_release_fw;
+				} else if (err < 0) {
 					bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
 						   err);
 					goto err_release_fw;
Signature · 1 line
2.45.2
author
#4 lore raw

PATCH 3/3 Bluetooth: btmtk: Add reset mechanism if downloading firmware failed

In reply to Chris Lu

Add a new flag 'BTMTK_FIRMWARE_DL_RETRY'.
If an error occurs during mt79xx firmware download process, this flag will be set and cleared after a reset. If the flag is already set and firmware still cannot be loaded successfully after a reset, no further reset attempts will be made. In other words, if there is a problem during firmware download, only one reset will be attempted.

---
 drivers/bluetooth/btmtk.c | 6 ++++++
 drivers/bluetooth/btmtk.h | 1 +
 2 files changed, 7 insertions(+)
drivers/bluetooth/btmtk.c +6 -0
index 67db5a48c3e4..14e2f4100806 100644
@@ -1344,6 +1344,9 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 		err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
 						btmtk_usb_hci_wmt_sync);
 		if (err < 0) {
+			/* retry once if setup firmware error */
+			if (!test_and_set_bit(BTMTK_FIRMWARE_DL_RETRY, &btmtk_data->flags))
+				btmtk_reset_sync(hdev);
 			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
 			return err;
 		}
@@ -1371,6 +1374,9 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 		hci_set_msft_opcode(hdev, 0xFD30);
 		hci_set_aosp_capable(hdev);
 
+		/* Clear BTMTK_FIRMWARE_DL_RETRY if setup successfully */
+		test_and_clear_bit(BTMTK_FIRMWARE_DL_RETRY, &btmtk_data->flags);
+
 		/* Set up ISO interface after protocol enabled */
 		if (test_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags)) {
 			if (!btmtk_usb_isointf_init(hdev))
drivers/bluetooth/btmtk.h +1 -0
index 5df7c3296624..b9df2b8f0627 100644
@@ -147,6 +147,7 @@ enum {
 	BTMTK_HW_RESET_ACTIVE,
 	BTMTK_ISOPKT_OVER_INTR,
 	BTMTK_ISOPKT_RUNNING,
+	BTMTK_FIRMWARE_DL_RETRY,
 };
 
 typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
Signature · 1 line
2.45.2
#5 lore raw
In reply to Chris Lu
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 16 lines · On Tue, 3 Feb 2026 14:25:07 +0800 you wrote:

When the device unexpectedly restarts during previous firmware download process, it can cause mt79xx firmware status to be abnormal in the next attempt. In this case, a reset should be performed to ensure everything starts afresh.

These changes include:
1. Optimizing the handling after the download function retry is exhausted, a reset should be performed.
2. Another download firmware command also needs to check status , and if an unexpected status occurs, trigger a reset.
3. Adding a flag "BTMTK_FIRMWARE_DL_RETRY": if download firmware process enters the reset mechanism, this flag will be set. After a successful setup, the flag will be cleared. If the flag is already set, no further reset attempts will be made to avoid endless reset retries.

Quoted 1 line

[...]

Here is the summary with links:
- [v1,1/3] Bluetooth: btmtk: improve mt79xx firmware setup retry flow
https://git.kernel.org/bluetooth/bluetooth-next/c/9cc9fc9bff32
- [v1,2/3] Bluetooth: btmtk: add status check in mt79xx firmware setup

    https://git.kernel.org/bluetooth/bluetooth-next/c/458b6d8b0108
  - [v1,3/3] Bluetooth: btmtk: Add reset mechanism if downloading firmware failed
    https://git.kernel.org/bluetooth/bluetooth-next/c/73130272a121

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html