dt-bindings: power: ti,omap3-smartreflex-core: convert to DT schema
PATCH v2 1/1 dt-bindings: power: ti,omap3-smartreflex-core: convert to DT schema
Convert Texas Instruments SmartReflex module binding to YAML format.
Signed-off-by Akhila YS <[email protected]>
---
Changes in v2:
- Remove unnecessary examples.
- Remove "ti,hwmods" property from example.
- Link to v1: https://lore.kernel.org/r/[email protected]
--- .../bindings/power/ti,omap3-smartreflex-core.yaml | 58 ++++++++++++++++++++++ .../devicetree/bindings/power/ti-smartreflex.txt | 47 ------------------ 2 files changed, 58 insertions(+), 47 deletions(-)
Documentation/devicetree/bindings/power/ti,omap3-smartreflex-core.yaml new file +58 -0
@@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/ti,omap3-smartreflex-core.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments SmartReflex module + +maintainers: + - Tony Lindgren <[email protected]> + +description: + Texas Instruments SmartReflex is an on-chip adaptive power management + technology integrated into TI's OMAP and other SoCs. It dynamically + adjusts voltage and frequency for different chip domains in real time + to compensate for process, voltage, and temperature (PVT) variations. + Dedicated hardware sensors and control logic continuously monitor + conditions and apply the lowest safe voltage for the required performance + level. + +properties: + compatible: + enum: + - ti,omap3-smartreflex-core + - ti,omap3-smartreflex-mpu-iva + - ti,omap4-smartreflex-core + - ti,omap4-smartreflex-mpu + - ti,omap4-smartreflex-iva + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + It was required by the OMAP interconnect/PRCM code to automatically + initialize hardware modules using TI's internal database. + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + }; +...
Documentation/devicetree/bindings/power/ti-smartreflex.txt deleted +0 -47
47 lines not on this page · raw message
---
base-commit: cc3aa43b44bdb43dfbac0fcb51c56594a11338a8
change-id: 20260126-smartreflex-9dd5cedffc0d
Best regards,
Signature · 1 line
Akhila YS <[email protected]>
Quoted 8 lines · Akhila YS
Convert Texas Instruments SmartReflex module binding to YAML format.
Signed-off-by Akhila YS <[email protected]>---
Changes in v2:
- Remove unnecessary examples.
- Remove "ti,hwmods" property from example.
- Link to v1: https://lore.kernel.org/r/[email protected]
Quoted 5 lines
--- .../bindings/power/ti,omap3-smartreflex-core.yaml | 58 ++++++++++++++++++++++ .../devicetree/bindings/power/ti-smartreflex.txt | 47 ------------------ 2 files changed, 58 insertions(+), 47 deletions(-)
Reviewed-by Rob Herring (Arm) <[email protected]>