Skip to contentSkip to conversation

drm/tyr: gpu: fix GpuInfo::log model/version decoding

PATCH Applied Onur Özkan 4 participants 4 messages Feb 10 – Feb 24

Subsystems (4)
lore
Share & tools
lore

Onur Özkan

author reviewer
#0 lore raw

PATCH 1/1 drm/tyr: gpu: fix GpuInfo::log model/version decoding

GpuInfo::log() was decoding GPU_ID like this:

  major = (self.gpu_id >> 16) & 0xff;
  minor = (self.gpu_id >> 8) & 0xff;
  status = self.gpu_id & 0xff;

That does not match the Mali GPU_ID layout and mixes unrelated fields. Due to that, model detection becomes mali-unknown on rk3588s which is wrong.

We can already get all the version information with a single GpuId::from call (less code and cleaner), so this patch uses it.

Also renamed GpuModels fields from major/minor to arch_major/prod_major to reflect their real meaning.

This change was tested on Orange Pi 5 (rk3588s) board and the results are as follows:

Before this change:

$ dmesg | grep 'tyr'
[   19.698338] tyr fb000000.gpu: mali-unknown id 0xa867 major 0x67 minor 0x0 status 0x5
[   19.699050] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.699817] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.702493] tyr fb000000.gpu: Tyr initialized correctly.

After this change:

$ dmesg | grep 'tyr'
[   19.591692] tyr fb000000.gpu: mali-g610 id 0xa867 major 0x0 minor 0x0 status 0x5
[   19.592374] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.593141] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.595831] tyr fb000000.gpu: Tyr initialized correctly.
---
 drivers/gpu/drm/tyr/gpu.rs | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/gpu/drm/tyr/gpu.rs +9 -11
index 6c582910dd5d..da97844efbec 100644
@@ -99,13 +99,11 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
     }
 
     pub(crate) fn log(&self, pdev: &platform::Device) {
-        let major = (self.gpu_id >> 16) & 0xff;
-        let minor = (self.gpu_id >> 8) & 0xff;
-        let status = self.gpu_id & 0xff;
+        let gpu_id = GpuId::from(self.gpu_id);
 
         let model_name = if let Some(model) = GPU_MODELS
             .iter()
-            .find(|&f| f.major == major && f.minor == minor)
+            .find(|&f| f.arch_major == gpu_id.arch_major && f.prod_major == gpu_id.prod_major)
         {
             model.name
         } else {
@@ -117,9 +115,9 @@ pub(crate) fn log(&self, pdev: &platform::Device) {
             "mali-{} id 0x{:x} major 0x{:x} minor 0x{:x} status 0x{:x}",
             model_name,
             self.gpu_id >> 16,
-            major,
-            minor,
-            status
+            gpu_id.ver_major,
+            gpu_id.ver_minor,
+            gpu_id.ver_status
         );
 
         dev_info!(
@@ -167,14 +165,14 @@ unsafe impl AsBytes for GpuInfo {}
 
 struct GpuModels {
     name: &'static str,
-    major: u32,
-    minor: u32,
+    arch_major: u32,
+    prod_major: u32,
 }
 
 const GPU_MODELS: [GpuModels; 1] = [GpuModels {
     name: "g610",
-    major: 10,
-    minor: 7,
+    arch_major: 10,
+    prod_major: 7,
 }];
 
 #[allow(dead_code)]
Signature · 1 line
2.51.2
Tested-by on v1 1/1
#1 lore raw

Verified on my NanoPi R6C; the GPU model is now correctly detected and printed as follows:

root@nanopi-r6s:~# dmesg | grep tyr
[    1.894322] tyr fb000000.gpu: supply sram not found, using dummy regulator
[    1.894527] tyr fb000000.gpu: mali-g610 id 0xa867 major 0x0 minor
0x0 status 0x5
[    1.894534] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809
Mem:0x301 MMU:0x2830 AS:0xff
[    1.894539] tyr fb000000.gpu: shader_present=0x0000000000050005
l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[    1.895170] tyr fb000000.gpu: Tyr initialized correctly.

Best regards,
Alvin

Quoted 97 lines · Onur Özkan

GpuInfo::log() was decoding GPU_ID like this:

  major = (self.gpu_id >> 16) & 0xff;
  minor = (self.gpu_id >> 8) & 0xff;
  status = self.gpu_id & 0xff;

That does not match the Mali GPU_ID layout and mixes unrelated fields. Due to that, model detection becomes mali-unknown on rk3588s which is wrong.

We can already get all the version information with a single GpuId::from call (less code and cleaner), so this patch uses it.

Also renamed GpuModels fields from major/minor to arch_major/prod_major to reflect their real meaning.

This change was tested on Orange Pi 5 (rk3588s) board and the results are as follows:

Before this change:

$ dmesg | grep 'tyr'
[   19.698338] tyr fb000000.gpu: mali-unknown id 0xa867 major 0x67 minor 0x0 status 0x5
[   19.699050] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.699817] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.702493] tyr fb000000.gpu: Tyr initialized correctly.

After this change:

$ dmesg | grep 'tyr'
[   19.591692] tyr fb000000.gpu: mali-g610 id 0xa867 major 0x0 minor 0x0 status 0x5
[   19.592374] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.593141] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.595831] tyr fb000000.gpu: Tyr initialized correctly.
---
 drivers/gpu/drm/tyr/gpu.rs | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/gpu/drm/tyr/gpu.rs +9 -12
index 6c582910dd5d..da97844efbec 100644
@@ -99,13 +99,11 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
     }
 
     pub(crate) fn log(&self, pdev: &platform::Device) {
-        let major = (self.gpu_id >> 16) & 0xff;
-        let minor = (self.gpu_id >> 8) & 0xff;
-        let status = self.gpu_id & 0xff;
+        let gpu_id = GpuId::from(self.gpu_id);
 
         let model_name = if let Some(model) = GPU_MODELS
             .iter()
-            .find(|&f| f.major == major && f.minor == minor)
+            .find(|&f| f.arch_major == gpu_id.arch_major && f.prod_major == gpu_id.prod_major)
         {
             model.name
         } else {
@@ -117,9 +115,9 @@ pub(crate) fn log(&self, pdev: &platform::Device) {
             "mali-{} id 0x{:x} major 0x{:x} minor 0x{:x} status 0x{:x}",
             model_name,
             self.gpu_id >> 16,
-            major,
-            minor,
-            status
+            gpu_id.ver_major,
+            gpu_id.ver_minor,
+            gpu_id.ver_status
         );
 
         dev_info!(
@@ -167,14 +165,14 @@ unsafe impl AsBytes for GpuInfo {}
 
 struct GpuModels {
     name: &'static str,
-    major: u32,
-    minor: u32,
+    arch_major: u32,
+    prod_major: u32,
 }
 
 const GPU_MODELS: [GpuModels; 1] = [GpuModels {
     name: "g610",
-    major: 10,
-    minor: 7,
+    arch_major: 10,
+    prod_major: 7,
 }];
 
 #[allow(dead_code)]
--

2.51.2

Reviewed-by on v1 1/1
#2 lore raw
In reply to Onur Özkan
Quoted 29 lines · On Tue, 10 Feb 2026 21:38:12 +0300 Onur Özkan <[email protected]> wrote:

GpuInfo::log() was decoding GPU_ID like this:

  major = (self.gpu_id >> 16) & 0xff;
  minor = (self.gpu_id >> 8) & 0xff;
  status = self.gpu_id & 0xff;

That does not match the Mali GPU_ID layout and mixes unrelated fields. Due to that, model detection becomes mali-unknown on rk3588s which is wrong.

We can already get all the version information with a single GpuId::from call (less code and cleaner), so this patch uses it.

Also renamed GpuModels fields from major/minor to arch_major/prod_major to reflect their real meaning.

This change was tested on Orange Pi 5 (rk3588s) board and the results are as follows:

Before this change:

$ dmesg | grep 'tyr'
[   19.698338] tyr fb000000.gpu: mali-unknown id 0xa867 major 0x67 minor 0x0 status 0x5
[   19.699050] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.699817] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.702493] tyr fb000000.gpu: Tyr initialized correctly.

After this change:

Quoted 7 lines
$ dmesg | grep 'tyr'
[   19.591692] tyr fb000000.gpu: mali-g610 id 0xa867 major 0x0 minor 0x0 status 0x5
[   19.592374] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.593141] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.595831] tyr fb000000.gpu: Tyr initialized correctly.
Quoted 56 lines
---
 drivers/gpu/drm/tyr/gpu.rs | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/gpu/drm/tyr/gpu.rs +9 -11
index 6c582910dd5d..da97844efbec 100644
@@ -99,13 +99,11 @@ pub(crate) fn new(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result<Self> {
     }
 
     pub(crate) fn log(&self, pdev: &platform::Device) {
-        let major = (self.gpu_id >> 16) & 0xff;
-        let minor = (self.gpu_id >> 8) & 0xff;
-        let status = self.gpu_id & 0xff;
+        let gpu_id = GpuId::from(self.gpu_id);
 
         let model_name = if let Some(model) = GPU_MODELS
             .iter()
-            .find(|&f| f.major == major && f.minor == minor)
+            .find(|&f| f.arch_major == gpu_id.arch_major && f.prod_major == gpu_id.prod_major)
         {
             model.name
         } else {
@@ -117,9 +115,9 @@ pub(crate) fn log(&self, pdev: &platform::Device) {
             "mali-{} id 0x{:x} major 0x{:x} minor 0x{:x} status 0x{:x}",
             model_name,
             self.gpu_id >> 16,
-            major,
-            minor,
-            status
+            gpu_id.ver_major,
+            gpu_id.ver_minor,
+            gpu_id.ver_status
         );
 
         dev_info!(
@@ -167,14 +165,14 @@ unsafe impl AsBytes for GpuInfo {}
 
 struct GpuModels {
     name: &'static str,
-    major: u32,
-    minor: u32,
+    arch_major: u32,
+    prod_major: u32,
 }
 
 const GPU_MODELS: [GpuModels; 1] = [GpuModels {
     name: "g610",
-    major: 10,
-    minor: 7,
+    arch_major: 10,
+    prod_major: 7,
 }];
 
 #[allow(dead_code)]
maintainer Applied
#3 lore raw
In reply to Onur Özkan
Quoted 29 lines · Onur Özkan

GpuInfo::log() was decoding GPU_ID like this:

  major = (self.gpu_id >> 16) & 0xff;
  minor = (self.gpu_id >> 8) & 0xff;
  status = self.gpu_id & 0xff;

That does not match the Mali GPU_ID layout and mixes unrelated fields. Due to that, model detection becomes mali-unknown on rk3588s which is wrong.

We can already get all the version information with a single GpuId::from call (less code and cleaner), so this patch uses it.

Also renamed GpuModels fields from major/minor to arch_major/prod_major to reflect their real meaning.

This change was tested on Orange Pi 5 (rk3588s) board and the results are as follows:

Before this change:

$ dmesg | grep 'tyr'
[   19.698338] tyr fb000000.gpu: mali-unknown id 0xa867 major 0x67 minor 0x0 status 0x5
[   19.699050] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.699817] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.702493] tyr fb000000.gpu: Tyr initialized correctly.

After this change:

Quoted 7 lines
$ dmesg | grep 'tyr'
[   19.591692] tyr fb000000.gpu: mali-g610 id 0xa867 major 0x0 minor 0x0 status 0x5
[   19.592374] tyr fb000000.gpu: Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[   19.593141] tyr fb000000.gpu: shader_present=0x0000000000050005 l2_present=0x0000000000000001 tiler_present=0x0000000000000001
[   19.595831] tyr fb000000.gpu: Tyr initialized correctly.

Applied to drm-rust-next. Thanks!