tools/btpclient: Add GATT support to get Device name
PATCH 1/1 tools/btpclient: Add GATT support to get Device name
The device name is retrieved during GATT connection, so no need to send a specific request, just need to send the name to PTS when the property is updated.
This allows to pass GAP/IDLE/NAMP/BV-01-C.
--- src/shared/btp.h | 18 +++++++ tools/btpclient.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 137 insertions(+)
src/shared/btp.h +18 -0
@@ -285,6 +285,24 @@ struct btp_gap_identity_resolved_ev {bdaddr_t identity_address; } __packed; +#define BTP_OP_GATT_READ_SUPPORTED_COMMANDS 0x01 + +#define BTP_OP_GATT_READ_UUID 0x12 +struct btp_gatt_read_uuid_cp { +uint8_t address_type; +bdaddr_t address; +uint16_t start_handle; +uint16_t end_handle; +uint8_t uuid_len; +uint8_t uuid[]; +} __packed; + +struct btp_gatt_read_uuid_rp { +uint8_t status; +uint8_t count; +uint8_t data[]; +} __packed; +struct btp ;typedef void (*btp_destroy_func_t )(void *user_data);
tools/btpclient.c +119 -0
161 lines not on this page · raw message
Signature · 1 line
2.43.0