dt-bindings: hwmon: convert npcm750-pwm-fan to DT schema
Tomer Maimon
maintainerPATCH v2 1/1 dt-bindings: hwmon: convert npcm750-pwm-fan to DT schema
Convert the Nuvoton HWMON PWM and FAN controllers binding to schema format.
Signed-off-by Tomer Maimon <[email protected]>
---
Addressed comments from:
- Rob Herring : https://www.spinics.net/lists/kernel/msg6047623.html
Changes since version 1:
- Modify yaml file.
- Remove unnecessary symbols.
- Add items.
.../bindings/hwmon/npcm750-pwm-fan.txt | 88 ----------- .../hwmon/nuvoton,npcm750-pwm-fan.yaml | 139 ++++++++++++++++++ 2 files changed, 139 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,npcm750-pwm-fan.yaml
Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt deleted +0 -88
@@ -1,88 +0,0 @@ -Nuvoton NPCM PWM and Fan Tacho controller device - -The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM) -controller outputs and 16 Fan tachometer controller inputs. - -The Nuvoton BMC NPCM8XX supports 12 Pulse-width modulation (PWM) -controller outputs and 16 Fan tachometer controller inputs. - -Required properties for pwm-fan node -- #address-cells : should be 1. -- #size-cells : should be 0. -- compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX. - : "nuvoton,npcm845-pwm-fan" for Arbel NPCM8XX. -- reg : specifies physical base address and size of the registers. -- reg-names : must contain: - * "pwm" for the PWM registers. - * "fan" for the Fan registers. -- clocks : phandle of reference clocks. -- clock-names : must contain - * "pwm" for PWM controller operating clock. - * "fan" for Fan controller operating clock. -- interrupts : contain the Fan interrupts with flags for falling edge. -- pinctrl-names : a pinctrl state named "default" must be defined. -- pinctrl-0 : phandle referencing pin configuration of the PWM and Fan - controller ports. - -fan subnode format: -=================== -Under fan subnode can be upto 8 child nodes, each child node representing a fan. -Each fan subnode must have one PWM channel and at least one Fan tach channel. - -For PWM channel can be configured cooling-levels to create cooling device. -Cooling device could be bound to a thermal zone for the thermal control. - -Required properties for each child node: -- reg : specify the PWM output channel. - integer value in the range 0 through 7, that represent - the PWM channel number that used. - -- fan-tach-ch : specify the Fan tach input channel. - integer value in the range 0 through 15, that represent - the fan tach channel number that used. - - At least one Fan tach input channel is required - -Optional property for each child node: -- cooling-levels: PWM duty cycle values in a range from 0 to 255 - which correspond to thermal cooling states. - -Examples: - -pwm_fan:pwm-fan-controller@103000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nuvoton,npcm750-pwm-fan"; - reg = <0x103000 0x2000>, - <0x180000 0x8000>; - reg-names = "pwm", "fan"; - clocks = <&clk NPCM7XX_CLK_APB3>, - <&clk NPCM7XX_CLK_APB4>; - clock-names = "pwm","fan"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins - &fanin0_pins &fanin1_pins &fanin2_pins - &fanin3_pins &fanin4_pins>; - fan@0 { - reg = <0x00>; - fan-tach-ch = /bits/ 8 <0x00 0x01>; - cooling-levels = <127 255>; - }; - fan@1 { - reg = <0x01>; - fan-tach-ch = /bits/ 8 <0x02 0x03>; - }; - fan@2 { - reg = <0x02>; - fan-tach-ch = /bits/ 8 <0x04>; - }; - -};
Documentation/devicetree/bindings/hwmon/nuvoton,npcm750-pwm-fan.yaml new file +139 -0
139 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 13 lines · Tomer Maimon
Convert the Nuvoton HWMON PWM and FAN controllers binding to schema format.
Signed-off-by Tomer Maimon <[email protected]>---
Addressed comments from:
- Rob Herring : https://www.spinics.net/lists/kernel/msg6047623.htmlChanges since version 1:
- Modify yaml file.
- Remove unnecessary symbols.
- Add items.
Quoted 6 lines
.../bindings/hwmon/npcm750-pwm-fan.txt | 88 ----------- .../hwmon/nuvoton,npcm750-pwm-fan.yaml | 139 ++++++++++++++++++ 2 files changed, 139 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,npcm750-pwm-fan.yaml
Reviewed-by Rob Herring (Arm) <[email protected]>
Quoted 6 lines · Tomer Maimon
Convert the Nuvoton HWMON PWM and FAN controllers binding to schema format.
Signed-off-by Tomer Maimon <[email protected]>Reviewed-by Rob Herring (Arm) <[email protected]>---
Applied.
Thanks,
Guenter