Fix flowindent for "return" probes with multiple statements
PATCH 1/1 Fix flowindent for "return" probes with multiple statements
From: Eugene Loh <[email protected]>
The flowindent algorithm should change indentation based only on the number of levels of entry and return. So, if an entry or return probe has multiple statements, the indentation should change only for the first statement.
Such logic is used for entry probes. Similar logic should be used for return probes.
Add a test to cover the case of multiple statements per entry and return probes. Also have it check a greater number of indentations. Since the new test supersedes the old ones, remove the old tests, which were fickle anyhow. The new test can still fail -- the flowindent algorithm is not completely robust -- so allow reinvocation in case of failure. The intermittent failures of flowindent tests have long been a testing irritant. Now, with reinvocation, testing shows no failures in 100 iterations on over a dozen systems.
Signed-off-by Eugene Loh <[email protected]>
--- libdtrace/dt_consume.c | 11 +- test/unittest/options/tst.F.aarch64.r | 1 - test/unittest/options/tst.F.d | 36 ---- test/unittest/options/tst.F.r.p | 1 - test/unittest/options/tst.F.x86_64.r | 1 - .../unittest/options/tst.flowindent.aarch64.r | 160 ---------------- test/unittest/options/tst.flowindent.d | 36 ---- test/unittest/options/tst.flowindent.r | 1 + test/unittest/options/tst.flowindent.r.p | 7 - test/unittest/options/tst.flowindent.sh | 171 ++++++++++++++++++ test/unittest/options/tst.flowindent.x86_64.r | 160 ---------------- 11 files changed, 176 insertions(+), 409 deletions(-) delete mode 120000 test/unittest/options/tst.F.aarch64.r delete mode 100644 test/unittest/options/tst.F.d delete mode 120000 test/unittest/options/tst.F.r.p delete mode 120000 test/unittest/options/tst.F.x86_64.r delete mode 100644 test/unittest/options/tst.flowindent.aarch64.r delete mode 100644 test/unittest/options/tst.flowindent.d create mode 100644 test/unittest/options/tst.flowindent.r delete mode 100755 test/unittest/options/tst.flowindent.r.p create mode 100755 test/unittest/options/tst.flowindent.sh delete mode 100644 test/unittest/options/tst.flowindent.x86_64.r
libdtrace/dt_consume.c +4 -7
@@ -475,17 +475,14 @@ dt_flowindent(dtrace_hdl_t *dtp, dtrace_probedata_t *data, dtrace_id_t lastprid, }/* -* If we're going to indent this, we need to check the ID of our last -* call. If we're looking at the same probe ID but a different STID, -* we _don't_ want to indent. (Yes, there are some minor holes in -* this scheme -- it's a heuristic.) +* If we're looking at the same probe ID but a different STID, +* we do NOT want to change indentation. (This heuristic could fail.) */ -if (flow ==DTRACEFLOW_ENTRY ) { +if (flow !=DTRACEFLOW_NONE )if (stid != laststid && pd->id == lastprid) flow =DTRACEFLOW_NONE ; - } -if (flow ==DTRACEFLOW_ENTRY || flow ==DTRACEFLOW_RETURN ) +if (flow !=DTRACEFLOW_NONE ) data->dtpda_prefix = str;else data->dtpda_prefix ="| " ;
test/unittest/options/tst.F.aarch64.r deleted +0 -1
@@ -1 +0,0 @@ -tst.flowindent.aarch64.r
test/unittest/options/tst.F.d deleted +0 -36
@@ -1,36 +0,0 @@ -/* - * Oracle Linux DTrace. - * Copyright (c) 2022, 2024, Oracle and/or its affiliates. All rights reserved. - * Licensed under the Universal Permissive License v 1.0 as shown at - * http://oss.oracle.com/licenses/upl. - */ - -/* - * ASSERTION: The -F option enables entry/return matching output. - * - * SECTION: Options and Tunables/Consumer Options - */ - -/* @@runtest-opts: -FZ -xswitchrate=1s */ -/* @@timeout: 15 */ -/* @@trigger: readwholedir */ - -BEGIN -{ - i = 0; - j = 0; -} - -syscall::read: -/pid == $target/ -{ - printf("syscall: %d\n", i++); -} - -fbt:vmlinux:SyS_read:, -fbt:vmlinux:__arm64_sys_read:, -fbt:vmlinux:__x64_sys_read: -/pid == $target/ -{ - printf("fbt: %d\n", j++); -}
test/unittest/options/tst.F.r.p deleted +0 -1
@@ -1 +0,0 @@ -tst.flowindent.r.p
test/unittest/options/tst.F.x86_64.r deleted +0 -1
@@ -1 +0,0 @@ -tst.flowindent.x86_64.r
test/unittest/options/tst.flowindent.aarch64.r deleted +0 -160
160 lines not on this page · raw message
test/unittest/options/tst.flowindent.d deleted +0 -36
@@ -1,36 +0,0 @@ -/* - * Oracle Linux DTrace. - * Copyright (c) 2022, 2024, Oracle and/or its affiliates. All rights reserved. - * Licensed under the Universal Permissive License v 1.0 as shown at - * http://oss.oracle.com/licenses/upl. - */ - -/* - * ASSERTION: The -xflowindent option enables entry/return matching output. - * - * SECTION: Options and Tunables/Consumer Options - */ - -/* @@runtest-opts: -xflowindent -Z -xswitchrate=1s */ -/* @@timeout: 15 */ -/* @@trigger: readwholedir */ - -BEGIN -{ - i = 0; - j = 0; -} - -syscall::read: -/pid == $target/ -{ - printf("syscall: %d\n", i++); -} - -fbt:vmlinux:SyS_read:, -fbt:vmlinux:__arm64_sys_read:, -fbt:vmlinux:__x64_sys_read: -/pid == $target/ -{ - printf("fbt: %d\n", j++); -}
test/unittest/options/tst.flowindent.r new file +1 -0
@@ -0,0 +1 @@ +success
test/unittest/options/tst.flowindent.r.p deleted +0 -7
@@ -1,7 +0,0 @@ -#!/usr/bin/gawk -f - -# Report only from 40 to 80. -BEGIN { report = 0 } -$NF == 40 { report = 1 } -$NF == 80 { report = 0 } -report == 1 { print }
test/unittest/options/tst.flowindent.sh new file +171 -0
171 lines not on this page · raw message
test/unittest/options/tst.flowindent.x86_64.r deleted +0 -160
160 lines not on this page · raw message
Signature · 1 line
2.47.3