libsamplerate0: Adding ptest for libsamplerate0
PATCH 1/1 libsamplerate0: Adding ptest for libsamplerate0
Executables Description:
callback_hang_test - Verifies that callback-based processing does not hang and that the library properly returns control without deadlocks.
callback_test - Tests the callback-driven processing mode of libsamplerate (SRC's non-blocking interface).
clone_test - Ensures the SRC state objects can be cloned correctly and continue producing identical output.
downsample_test - Tests accuracy and behavior when downsampling audio (reducing sample rate).
float_short_test - Tests conversions between float and short integer sample formats.
misc_test - Runs assorted sanity and utility tests that don't fit into other categories.
multi_channel_test - Verifies correct handling of multi-channel audio (e.g., stereo, 5.1) during sample-rate conversion.
multichan_throughput_test - Measures throughput and performance for multi-channel SRC processing.
nullptr_test - Ensures libsamplerate properly rejects or handles NULL pointers and invalid state.
reset_test - Tests the reset() behavior - state clearing, flushing buffers, resetting filters.
simple_test - The most basic test of sample-rate conversion functionality - often converting a small buffer to ensure fundamental correctness.
snr_bw_test - Measures Signal - Noise Ratio (SNR) and bandwidth performance for different converter algorithms.
src-evaluate - Evaluates internal SRC filter performance, quality, and algorithmic behavior.
termination_test - Ensures end - stream / termination behavior is handled correctly without artifacts or crashes.
throughput_test - Benchmarks throughput for mono or simple use cases to measure raw processing speed.
varispeed_test - Tests variable sample-rate operation (changing SRC ratio on the fly).
Time taken to execute the ptest:- Approx ~3 mins
--- .../distro/include/ptest-packagelists.inc | 1 + .../libsamplerate/files/run-ptest | 51 +++++++++++++++++++ .../libsamplerate/libsamplerate0_0.2.2.bb | 34 ++++++++++++- 3 files changed, 85 insertions(+), 1 deletion(-) create mode 100644 meta/recipes-multimedia/libsamplerate/files/run-ptest
meta/conf/distro/include/ptest-packagelists.inc +1 -0
@@ -122,6 +122,7 @@ PTESTS_SLOW = "\ libmodule-build-perl \ libpng \ ${@bb.utils.contains('DISTRO_FEATURES', 'seccomp', 'libseccomp', '',d)} \ + libsamplerate0 \ lttng-tools \ lz4 \ openssh \
meta/recipes-multimedia/libsamplerate/files/run-ptest new file +51 -0
51 lines not on this page · raw message
meta/recipes-multimedia/libsamplerate/libsamplerate0_0.2.2.bb +33 -1
@@ -8,6 +8,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=336d6faf40fb600bafb0061f4052f1f4 \ DEPENDS = "libsndfile1" SRC_URI = "${GITHUB_BASE_URI}/download/${PV}/libsamplerate-${PV}.tar.xz \ + file://run-ptest \ " SRC_URI[sha256sum] = "3258da280511d24b49d6b08615bbe824d0cacc9842b0e4caf11c52cf2b043893"
@@ -18,9 +19,40 @@ GITHUB_BASE_URI = "https://github.com/libsndfile/libsamplerate/releases" S = "${UNPACKDIR}/libsamplerate-${PV}" -inherit autotools pkgconfig github-releases +inherit autotools pkgconfig github-releases ptest # FFTW and ALSA are only used in tests and examples, so they don't affect # normal builds. It should be safe to ignore these, but explicitly disabling # them adds some extra certainty that builds are deterministic. EXTRA_OECONF = "--disable-fftw --disable-alsa" +do_compile:append() { + oe_runmake buildtest-TESTS +} + +do_install_ptest() { + t=${D}${PTEST_PATH} + + # This lets libtool do any needed relinking and install the right binary. + if [ -x "${B}/libtool" ] && [ -d "${B}/tests" ]; then + find "${B}/tests" -maxdepth 1 -type f -perm -111 2>/dev/null \ + | while IFS= read -r wrapper; do + bn=$(basename "$wrapper") + case "$bn" in + *.a|*.la|*.o|*.lo|*.la~) continue ;; + esac + [ -e "$t/$bn" ] && continue + # Install via libtool using the wrapper + "${B}/libtool" --mode=install install -c "$wrapper" "$t/$bn" + done + fi + + # install them directly. + if [ -d "${B}/tests/.libs" ]; then + find "${B}/tests/.libs" -maxdepth 1 -type f -perm -111 2>/dev/null \ + | while IFS= read -r realbin; do + bn=$(basename "$realbin") + [ -e "$t/$bn" ] && continue + install -m 0755 "$realbin" "$t/$bn" + done + fi +}
Signature · 1 line
2.34.1
Quoted 18 lines · Shaik Moin via lists.openembedded.org
Executables Description:
callback_hang_test- Verifies that callback-based processing does not hang and that the library properly returns control without deadlocks.
callback_test- Tests the callback-driven processing mode of libsamplerate (SRC's non-blocking interface).
clone_test- Ensures the SRC state objects can be cloned correctly and continue producing identical output.
downsample_test- Tests accuracy and behavior when downsampling audio (reducing sample rate).
float_short_test- Tests conversions between float and short integer sample formats.
misc_test- Runs assorted sanity and utility tests that don't fit into other categories.
multi_channel_test- Verifies correct handling of multi-channel audio (e.g., stereo, 5.1) during sample-rate conversion.
multichan_throughput_test- Measures throughput and performance for multi-channel SRC processing.
nullptr_test- Ensures libsamplerate properly rejects or handles NULL pointers and invalid state.
reset_test- Tests thereset()behavior - state clearing, flushing buffers, resetting filters.
simple_test- The most basic test of sample-rate conversion functionality - often converting a small buffer to ensure fundamental correctness.
snr_bw_test- Measures Signal - Noise Ratio (SNR) and bandwidth performance for different converter algorithms.
src-evaluate - Evaluates internal SRC filter performance, quality, and algorithmic behavior.
termination_test- Ensures end - stream / termination behavior is handled correctly without artifacts or crashes.
throughput_test- Benchmarks throughput for mono or simple use cases to measure raw processing speed.
varispeed_test- Tests variable sample-rate operation (changing SRC ratio on the fly).
Quoted 4 lines
Time taken to execute the ptest:- Approx ~3 mins
Signed-off-by Shaik Moin <[email protected]>---
Hi Shaik,
Thanks for your patch.
It looks like something is off with this test. While running on the
autobuilder, no results are found:
WARNING: core-image-ptest-libsamplerate0-1.0-r0 do_testimage: There were failing ptests.
Traceback (most recent call last):
File "/srv/pokybuild/yocto-worker/qemux86-64-ptest/build/layers/openembedded-core/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f
return func(*args, **kwargs)
File "/srv/pokybuild/yocto-worker/qemux86-64-ptest/build/layers/openembedded-core/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f
return func(*args, **kwargs)
File "/srv/pokybuild/yocto-worker/qemux86-64-ptest/build/layers/openembedded-core/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f
return func(*args, **kwargs)
File "/srv/pokybuild/yocto-worker/qemux86-64-ptest/build/layers/openembedded-core/meta/lib/oeqa/runtime/cases/ptest.py", line 27, in test_ptestrunner_expectfail
self.do_ptestrunner()
~~~~~~~~~~~~~~~~~~~^^
File "/srv/pokybuild/yocto-worker/qemux86-64-ptest/build/layers/openembedded-core/meta/lib/oeqa/runtime/cases/ptest.py", line 120, in do_ptestrunner
self.fail(failmsg)
~~~~~~~~~^^^^^^^^^AssertionError:
ptests which had no test results:
['libsamplerate0']
https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/1124
https://autobuilder.yoctoproject.org/valkyrie/#/builders/61/builds/3112
https://autobuilder.yoctoproject.org/valkyrie/#/builders/73/builds/3153
Test results can be seen here:
https://valkyrie.yocto.io/pub/non-release/20260224-104/testresults/qemuarm64-ptest/core-image-ptest-libsamplerate0/
https://valkyrie.yocto.io/pub/non-release/20260224-104/testresults/qemuriscv64-ptest/core-image-ptest-libsamplerate0/
https://valkyrie.yocto.io/pub/non-release/20260224-104/testresults/qemux86-64-ptest/core-image-ptest-libsamplerate0/
Can you have a look at the issue?
Thanks,
Mathieu
Signature · 3 lines
Mathieu Dubois-Briand, Bootlin Embedded Linux and Kernel engineering https://bootlin.com