mmc: sdio: add MediaTek MT7902 SDIO device ID
Subsystems (3)
PATCH v2 1/8 mmc: sdio: add MediaTek MT7902 SDIO device ID
From: Sean Wang <[email protected]>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
---
v2:
1. Sort the MT7902 SDIO ID definitions.
2. Add Acked-by from Ulf. Ulf mentioned this should go along with the other patches, so Ulf not picking this via the mmc tree.
--- include/linux/mmc/sdio_ids.h | 1 + 1 file changed, 1 insertion(+)
include/linux/mmc/sdio_ids.h +1 -0
@@ -111,6 +111,7 @@#define SDIO_VENDOR_ID_MEDIATEK 0x037a#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668 +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
Signature · 1 line
2.43.0
PATCH v2 2/8 Bluetooth: btmtk: add MT7902 MCU support
From: Sean Wang <[email protected]>
Add MT7902 device ID and firmware filename to enable MCU firmware loading.
---
v2: no changes
--- drivers/bluetooth/btmtk.c | 1 + drivers/bluetooth/btmtk.h | 1 + 2 files changed, 2 insertions(+)
drivers/bluetooth/btmtk.c +1 -0
@@ -1338,6 +1338,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)case 0x7922 :case 0x7925 :case 0x7961 : +case 0x7902 :btmtk_fw_get_filename (fw_bin_name,sizeof (fw_bin_name), dev_id, fw_version, fw_flavor);
drivers/bluetooth/btmtk.h +1 -0
@@ -5,6 +5,7 @@#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"#define FIRMWARE_MT7922 "mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin" +#define FIRMWARE_MT7902 "mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"#define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"#define FIRMWARE_MT7925 "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
Signature · 1 line
2.43.0
PATCH v2 3/8 Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 13d3 & PID 3579 for MediaTek MT7902 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3579 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
---
v2:
1. Update the commit message with the correct VID/PID.
2. Add clear comments specifying which device the VID/PID corresponds to.
--- drivers/bluetooth/btusb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/bluetooth/btusb.c +3 -1
@@ -671,7 +671,9 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, - + /* MediaTek MT7902 Bluetooth devices */ + { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
Signature · 1 line
2.43.0
PATCH v2 4/8 Bluetooth: btusb: Add new VID/PID 13d3/3580 for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 13d3 & PID 3580 for MediaTek MT7902 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3580 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
---
v2: newly added
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -674,6 +674,8 @@ static const struct usb_device_id quirks_table[] = {/* MediaTek MT7902 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
Signature · 1 line
2.43.0
PATCH v2 5/8 Bluetooth: btusb: Add new VID/PID 13d3/3594 for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 13d3 & PID 3594 for MediaTek MT7902 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3594 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
---
v2: newly added
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -676,6 +676,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3594), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
Signature · 1 line
2.43.0
PATCH v2 6/8 Bluetooth: btusb: Add new VID/PID 13d3/3596 for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 13d3 & PID 3596 for MediaTek MT7902 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3596 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
---
v2: newly added
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3594), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3596), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
Signature · 1 line
2.43.0
PATCH v2 7/8 Bluetooth: btusb: Add new VID/PID 0e8d/1ede for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 0e8d & PID 1ede for MediaTek MT7902 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=1ede Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
---
v2: newly added
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -672,6 +672,8 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7902 Bluetooth devices */ + { USB_DEVICE(0x0e8d, 0x1ede), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3580), .driver_info = BTUSB_MEDIATEK |
Signature · 1 line
2.43.0
PATCH v2 8/8 Bluetooth: btmtk: add MT7902 SDIO support
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add MT7902 Bluetooth SDIO support by introducing chip data and registering the device ID.
Runtime PM is not yet supported by the driver, but normal operation is unaffected.
---
v2: no changes
--- drivers/bluetooth/btmtksdio.c | 42 ++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 13 deletions(-)
drivers/bluetooth/btmtksdio.c +29 -13
@@ -42,24 +42,35 @@ struct btmtksdio_data {const char *fwname;u16 chipid;bool lp_mbox_supported; +bool pm_runtime_supported; };static const struct btmtksdio_data mt7663_data = { .fwname =FIRMWARE_MT7663 , .chipid =0x7663 , .lp_mbox_supported = false, + .pm_runtime_supported = true, };static const struct btmtksdio_data mt7668_data = { .fwname =FIRMWARE_MT7668 , .chipid =0x7668 , .lp_mbox_supported = false, + .pm_runtime_supported = true, };static const struct btmtksdio_data mt7921_data = { .fwname =FIRMWARE_MT7961 , .chipid =0x7921 , .lp_mbox_supported = true, + .pm_runtime_supported = true, +}; + +static const struct btmtksdio_data mt7902_data = { + .fwname =FIRMWARE_MT7902 , + .chipid =0x7902 , + .lp_mbox_supported = false, + .pm_runtime_supported = false, };static const struct sdio_device_id btmtksdio_table[] = {
@@ -69,6 +80,8 @@ static const struct sdio_device_id btmtksdio_table[] = { .driver_data = (kernel_ulong_t)&mt7668_data }, {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961), .driver_data = (kernel_ulong_t)&mt7921_data }, + {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7902), + .driver_data = (kernel_ulong_t)&mt7902_data }, { }/* Terminating entry */ };MODULE_DEVICE_TABLE (sdio, btmtksdio_table);
@@ -1090,6 +1103,7 @@ static int btmtksdio_setup(struct hci_dev *hdev)set_bit (BTMTKSDIO_HW_TX_READY , &bdev->tx_state);switch (bdev->data->chipid) { +case 0x7902 :case 0x7921 :if (test_bit (BTMTKSDIO_HW_RESET_ACTIVE , &bdev->tx_state)) { err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS,
@@ -1167,22 +1181,24 @@ static int btmtksdio_setup(struct hci_dev *hdev) delta =ktime_sub (rettime, calltime); duration = (unsigned long long )ktime_to_ns (delta) >>10 ; -pm_runtime_set_autosuspend_delay (bdev->dev, -MTKBTSDIO_AUTOSUSPEND_DELAY ); -pm_runtime_use_autosuspend (bdev->dev); +if (bdev->data->pm_runtime_supported) { +pm_runtime_set_autosuspend_delay (bdev->dev, +MTKBTSDIO_AUTOSUSPEND_DELAY ); +pm_runtime_use_autosuspend (bdev->dev); - err =pm_runtime_set_active (bdev->dev); -if (err <0 ) -return err; + err =pm_runtime_set_active (bdev->dev); +if (err <0 ) +return err; -/* Default forbid runtime auto suspend, that can be allowed by -* enable_autosuspend flag or the PM runtime entry under sysfs. -*/ -pm_runtime_forbid (bdev->dev); -pm_runtime_enable (bdev->dev); +/* Default forbid runtime auto suspend, that can be allowed by +* enable_autosuspend flag or the PM runtime entry under sysfs. +*/ +pm_runtime_forbid (bdev->dev); +pm_runtime_enable (bdev->dev); -if (enable_autosuspend) -pm_runtime_allow (bdev->dev); +if (enable_autosuspend) +pm_runtime_allow (bdev->dev); + }bt_dev_info (hdev,"Device setup in %llu usecs" , duration);
Signature · 1 line
2.43.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1057030
---Test result---
Test Summary:
CheckPatch PENDING 0.40 seconds GitLint PENDING 0.26 seconds SubjectPrefix FAIL 0.85 seconds BuildKernel PASS 25.85 seconds CheckAllWarning PASS 28.49 seconds CheckSparse WARNING 34.06 seconds BuildKernel32 PASS 25.19 seconds TestRunnerSetup PASS 563.84 seconds TestRunner_l2cap-tester PASS 28.67 seconds TestRunner_iso-tester PASS 114.15 seconds TestRunner_bnep-tester PASS 6.53 seconds TestRunner_mgmt-tester FAIL 115.33 seconds TestRunner_rfcomm-tester PASS 9.59 seconds TestRunner_sco-tester FAIL 14.79 seconds TestRunner_ioctl-tester PASS 10.31 seconds TestRunner_mesh-tester FAIL 12.60 seconds TestRunner_smp-tester PASS 9.09 seconds TestRunner_userchan-tester PASS 6.84 seconds IncrementalBuild PENDING 0.50 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:drivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1518:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4671:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4677:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4678:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4680:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4683:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4671:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4677:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4678:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4680:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4683:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4671:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4677:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4678:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4680:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4683:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4671:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4677:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4678:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4680:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4683:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4671:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4677:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4678:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4680:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4681:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4683:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4684:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4685:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4686:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1572:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1573:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1575:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1576:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1577:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expression
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.106 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.715 seconds Mesh - Send cancel - 2 Timed out 1.991 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:
---
Regards,
Linux Bluetooth
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Tue, 24 Feb 2026 00:13:18 -0600 you wrote:
From: Sean Wang <[email protected]>
Add SDIO device ID (
0x790a) for MediaTek MT7902 tosdio_ids.h.Acked-by Ulf Hansson <[email protected]>Signed-off-by Sean Wang <[email protected]>[...]
Here is the summary with links:
- [v2,1/8] mmc: sdio: add MediaTek MT7902 SDIO device ID
https://git.kernel.org/bluetooth/bluetooth-next/c/30c211ed0440 - [v2,2/8] Bluetooth: btmtk: add MT7902 MCU support https://git.kernel.org/bluetooth/bluetooth-next/c/ad7c85c44e42 - [v2,3/8] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902 https://git.kernel.org/bluetooth/bluetooth-next/c/39b32232e047 - [v2,4/8] Bluetooth: btusb: Add new VID/PID 13d3/3580 for MT7902 https://git.kernel.org/bluetooth/bluetooth-next/c/cde58a6f8d84 - [v2,5/8] Bluetooth: btusb: Add new VID/PID 13d3/3594 for MT7902 https://git.kernel.org/bluetooth/bluetooth-next/c/71fa9af03199 - [v2,6/8] Bluetooth: btusb: Add new VID/PID 13d3/3596 for MT7902 https://git.kernel.org/bluetooth/bluetooth-next/c/2dbd6783e368 - [v2,7/8] Bluetooth: btusb: Add new VID/PID 0e8d/1ede for MT7902 https://git.kernel.org/bluetooth/bluetooth-next/c/df6be153d1bb - [v2,8/8] Bluetooth: btmtk: add MT7902 SDIO support https://git.kernel.org/bluetooth/bluetooth-next/c/287f90321f25
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html