i2c: rtl9300: add support for 50 kHz and 2.5 MHz bus speeds
Subsystems (2)
PATCH 1/1 i2c: rtl9300: add support for 50 kHz and 2.5 MHz bus speeds
Some SFP modules on certain switches (for example the ONTi ONT-S508CL-8S and XikeStor SKS8300-8X) exhibit unreliable I2C communication at the currently supported speeds. Add support for 50 kHz and 2.5 MHz I2C bus modes on the RTL9300 to improve compatibility with these devices.
--- drivers/i2c/busses/i2c-rtl9300.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/i2c/busses/i2c-rtl9300.c +14 -2
@@ -11,10 +11,16 @@#include <linux/unaligned.h> enum rtl9300_bus_freq { -RTL9300_I2C_STD_FREQ , -RTL9300_I2C_FAST_FREQ , +RTL9300_I2C_STD_FREQ ,// 100kHz +RTL9300_I2C_FAST_FREQ ,// 400kHz +RTL9300_I2C_SUPER_FAST_FREQ ,// 2.5MHz +RTL9300_I2C_SLOW_FREQ ,// 50kHz }; +#define RTL9300_I2C_MAX_SUPER_FAST_FREQ 2500000 +#define RTL9300_I2C_MAX_SLOW_FREQ 50000 + +struct rtl9300_i2c ;struct rtl9300_i2c_chan {
@@ -433,6 +439,12 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)case I2C_MAX_FAST_MODE_FREQ : chan->bus_freq =RTL9300_I2C_FAST_FREQ ;break ; +case RTL9300_I2C_MAX_SUPER_FAST_FREQ : + chan->bus_freq =RTL9300_I2C_SUPER_FAST_FREQ ; +break ; +case RTL9300_I2C_MAX_SLOW_FREQ : + chan->bus_freq =RTL9300_I2C_SLOW_FREQ ; +break ;default :dev_warn (i2c->dev,"SDA%d clock-frequency %d not supported using default\n" , sda_num, clock_freq);
Signature · 1 line
2.34.1
Hi Jan,
Quoted 6 lines · Jan Kantert
Some SFP modules on certain switches (for example the ONTi ONT-S508CL-8S and XikeStor SKS8300-8X) exhibit unreliable I2C communication at the currently supported speeds. Add support for 50 kHz and 2.5 MHz I2C bus modes on the RTL9300 to improve compatibility with these devices.
Signed-off-by Jan Kantert <[email protected]>
Thanks,
Quoted 40 lines
--- drivers/i2c/busses/i2c-rtl9300.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)drivers/i2c/busses/i2c-rtl9300.c +14
-2@@ -11,10 +11,16 @@#include <linux/unaligned.h> enum rtl9300_bus_freq { -RTL9300_I2C_STD_FREQ , -RTL9300_I2C_FAST_FREQ , +RTL9300_I2C_STD_FREQ ,// 100kHz +RTL9300_I2C_FAST_FREQ ,// 400kHz +RTL9300_I2C_SUPER_FAST_FREQ ,// 2.5MHz +RTL9300_I2C_SLOW_FREQ ,// 50kHz }; +#define RTL9300_I2C_MAX_SUPER_FAST_FREQ 2500000 +#define RTL9300_I2C_MAX_SLOW_FREQ 50000 + +struct rtl9300_i2c ;struct rtl9300_i2c_chan {@@ -433,6 +439,12 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)case I2C_MAX_FAST_MODE_FREQ : chan->bus_freq =RTL9300_I2C_FAST_FREQ ;break ; +case RTL9300_I2C_MAX_SUPER_FAST_FREQ : + chan->bus_freq =RTL9300_I2C_SUPER_FAST_FREQ ; +break ; +case RTL9300_I2C_MAX_SLOW_FREQ : + chan->bus_freq =RTL9300_I2C_SLOW_FREQ ; +break ;default :dev_warn (i2c->dev,"SDA%d clock-frequency %d not supported using default\n" , sda_num, clock_freq);
Hi Jan,
Quoted 6 lines · Jan Kantert
Some SFP modules on certain switches (for example the ONTi ONT-S508CL-8S and XikeStor SKS8300-8X) exhibit unreliable I2C communication at the currently supported speeds. Add support for 50 kHz and 2.5 MHz I2C bus modes on the RTL9300 to improve compatibility with these devices.
Signed-off-by Jan Kantert <[email protected]>
merged to i2c/i2c-host.
Thanks,
Andi