FAILED: Patch "arm64: dts: rockchip: Fix rk356x PCIe range mappings" failed to apply to 6.12-stable tree
Subsystems (3)
Sasha Levin
maintainerThe patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
Thanks,
Sasha
------------------ original commit in Linus's tree ------------------
From f63ea193a404481f080ca2958f73e9f364682db9 Mon Sep 17 00:00:00 2001
From: Shawn Lin <[email protected]>
Date: Mon, 5 Jan 2026 16:15:28 +0800
Subject: [PATCH] arm64: dts: rockchip: Fix rk356x PCIe range mappings
The pcie bus address should be mapped 1:1 to the cpu side MMIO address, so that there is no same address allocated from normal system memory. Otherwise it's broken if the same address assigned to the EP for DMA purpose.Fix it to sync with the vendor BSP.
--- arch/arm64/boot/dts/rockchip/rk3568.dtsi | 4 ++-- arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/rockchip/rk3568.dtsi +2 -2
@@ -185,7 +185,7 @@ pcie3x1: pcie@fe270000 { <0x0 0xf2000000 0x0 0x00100000>; ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; + <0x03000000 0x3 0x40000000 0x3 0x40000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X1_POWERUP>; reset-names = "pipe";
@@ -238,7 +238,7 @@ pcie3x2: pcie@fe280000 { <0x0 0xf0000000 0x0 0x00100000>; ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; + <0x03000000 0x3 0x80000000 0x3 0x80000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X2_POWERUP>; reset-names = "pipe";
arch/arm64/boot/dts/rockchip/rk356x-base.dtsi +1 -1
@@ -1022,7 +1022,7 @@ pcie2x1: pcie@fe260000 { power-domains = <&power RK3568_PD_PIPE>; ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, - <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; + <0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>; resets = <&cru SRST_PCIE20_POWERUP>; reset-names = "pipe"; #address-cells = <3>;
Signature · 1 line
2.51.0