Skip to contentSkip to conversation

RDMA/rxe: Add the support that rxe can work in net namespace

PATCH Superseded Zhu Yanjun 2 participants 8 messages Mar 7 – Mar 8

Subsystems (3)

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Zhu Yanjun

author
#0 lore raw

v2 cover RDMA/rxe: Add the support that rxe can work in net namespace

Currently rxe does not work correctly in network namespaces.

When the rdma_rxe module is loaded, a UDP socket listening on port 4791 is created in init_net. When users run:

ip link add ... type rxe

inside another network namespace, the RXE RDMA link is created but it cannot function properly because the underlying UDP socket belongs to init_net. Other network namespaces cannot use that socket.

To address this issue, this series introduces net namespace support for rxe and moves socket management to be per network namespace.

The series first introduces per-net namespace management for the IPv4 and IPv6 sockets used by rxe. The sockets are created when the network namespace becomes active and are released when the namespace is destroyed.

Based on this infrastructure, rxe RDMA links are then created and destroyed within each network namespace. This ensures that both the UDP sockets and RDMA links are correctly scoped to the namespace in which they are used.

With these changes, rxe RDMA links can be created and used both in init_net and in other network namespaces, and resources are properly cleaned up during namespace teardown.

The series also includes a selftest to verify RXE functionality in network namespaces.

V1 -> V2: Fix the problems based on David Ahern.

Zhu Yanjun (4):
RDMA/nldev: Add dellink function pointer
RDMA/rxe: Add net namespace support for IPv4/IPv6 sockets RDMA/rxe: Support RDMA link creation and destruction per net namespace RDMA/rxe: Add testcase for net namespace rxe

 MAINTAINERS                                   |   1 +
 drivers/infiniband/core/nldev.c               |   6 +
 drivers/infiniband/sw/rxe/Makefile            |   3 +-
 drivers/infiniband/sw/rxe/rxe.c               |  38 ++++-
 drivers/infiniband/sw/rxe/rxe_net.c           | 144 +++++++++++++-----
 drivers/infiniband/sw/rxe/rxe_net.h           |   9 +-
 drivers/infiniband/sw/rxe/rxe_ns.c            | 136 +++++++++++++++++
 drivers/infiniband/sw/rxe/rxe_ns.h            |  17 +++
 include/rdma/rdma_netlink.h                   |   2 +
 tools/testing/selftests/Makefile              |   1 +
 tools/testing/selftests/rdma/Makefile         |   7 +
 tools/testing/selftests/rdma/config           |   3 +
 tools/testing/selftests/rdma/rxe_ipv6.sh      |  47 ++++++
 .../selftests/rdma/rxe_rping_between_netns.sh |  57 +++++++
 .../selftests/rdma/rxe_socket_with_netns.sh   |  64 ++++++++
 .../rdma/rxe_test_NETDEV_UNREGISTER.sh        |  38 +++++
 16 files changed, 526 insertions(+), 47 deletions(-)
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
 create mode 100644 tools/testing/selftests/rdma/Makefile
 create mode 100644 tools/testing/selftests/rdma/config
 create mode 100755 tools/testing/selftests/rdma/rxe_ipv6.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_rping_between_netns.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_socket_with_netns.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh
Signature · 1 line
2.52.0
author
#1 lore raw

PATCH v2 1/4 RDMA/nldev: Add dellink function pointer

The newlink function pointer is added. And the sock listening on port 4791 is added in the newlink function. So the dellink function is needed to remove the sock.

---
 drivers/infiniband/core/nldev.c | 6 ++++++
 include/rdma/rdma_netlink.h     | 2 ++
 2 files changed, 8 insertions(+)
drivers/infiniband/core/nldev.c +6 -0
index 2220a2dfab24..48684930660a 100644
@@ -1824,6 +1824,12 @@ static int nldev_dellink(struct sk_buff *skb, struct nlmsghdr *nlh,
 		return -EINVAL;
 	}
 
+	if (device->link_ops) {
+		err = device->link_ops->dellink(device);
+		if (err)
+			return err;
+	}
+
 	ib_unregister_device_and_put(device);
 	return 0;
 }
include/rdma/rdma_netlink.h +2 -0
index 326deaf56d5d..2fd1358ea57d 100644
@@ -5,6 +5,7 @@
 
 #include <linux/netlink.h>
 #include <uapi/rdma/rdma_netlink.h>
+#include <rdma/ib_verbs.h>
 
 struct ib_device;
 
@@ -126,6 +127,7 @@ struct rdma_link_ops {
 	struct list_head list;
 	const char *type;
 	int (*newlink)(const char *ibdev_name, struct net_device *ndev);
+	int (*dellink)(struct ib_device *dev);
 };
 
 void rdma_link_register(struct rdma_link_ops *ops);
Signature · 1 line
2.52.0
author
#2 lore raw

PATCH v2 2/4 RDMA/rxe: Add net namespace support for IPv4/IPv6 sockets

In reply to Zhu Yanjun

Add a net namespace implementation file to rxe to manage the lifecycle of IPv4 and IPv6 sockets per network namespace.

This implementation handles the creation and destruction of the sockets both for init_net and for dynamically created network namespaces. The sockets are initialized when a namespace becomes active and are properly released when the namespace is removed.

This change provides the infrastructure needed for rxe to operate correctly in environments using multiple network namespaces.

---
 drivers/infiniband/sw/rxe/Makefile |   3 +-
 drivers/infiniband/sw/rxe/rxe_ns.c | 134 +++++++++++++++++++++++++++++
 drivers/infiniband/sw/rxe/rxe_ns.h |  17 ++++
 3 files changed, 153 insertions(+), 1 deletion(-)
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
drivers/infiniband/sw/rxe/Makefile +2 -1
index 93134f1d1d0c..3977f4f13258 100644
@@ -22,6 +22,7 @@ rdma_rxe-y := \
 	rxe_mcast.o \
 	rxe_task.o \
 	rxe_net.o \
-	rxe_hw_counters.o
+	rxe_hw_counters.o \
+	rxe_ns.o
 
 rdma_rxe-$(CONFIG_INFINIBAND_ON_DEMAND_PAGING) += rxe_odp.o
drivers/infiniband/sw/rxe/rxe_ns.c new file +134 -0

134 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_ns.h new file +17 -0
new file mode 100644
index 000000000000..da5bfcea1274
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
+ */
+
+#ifndef RXE_NS_H
+#define RXE_NS_H
+
+struct sock *rxe_ns_pernet_sk4(struct net *net);
+struct sock *rxe_ns_pernet_sk6(struct net *net);
+void rxe_ns_pernet_set_sk4(struct net *net, struct sock *sk);
+void rxe_ns_pernet_set_sk6(struct net *net, struct sock *sk);
+int __init rxe_namespace_init(void);
+void __exit rxe_namespace_exit(void);
+
+#endif /* RXE_NS_H */
Signature · 1 line
2.52.0
author
#3 lore raw

PATCH v2 3/4 RDMA/rxe: Support RDMA link creation and destruction per net namespace

In reply to Zhu Yanjun

After introducing dellink handling and per-net namespace management for IPv4 and IPv6 sockets, extend rxe to create and destroy RDMA links within each network namespace.

With this change, RDMA links can be instantiated both in init_net and in other network namespaces. The lifecycle of the RDMA link is now tied to the corresponding namespace and is properly cleaned up when the namespace or link is removed.

This ensures rxe behaves correctly in multi-namespace environments and keeps socket and RDMA link resources consistent across namespace creation and teardown.

---
 drivers/infiniband/sw/rxe/rxe.c     |  38 +++++++-
 drivers/infiniband/sw/rxe/rxe_net.c | 145 +++++++++++++++++++++-------
 drivers/infiniband/sw/rxe/rxe_net.h |   9 +-
 drivers/infiniband/sw/rxe/rxe_ns.c  |  52 +++++-----
 drivers/infiniband/sw/rxe/rxe_ns.h  |   2 +-
 5 files changed, 174 insertions(+), 72 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +33 -5
index e891199cbdef..b0714f9abe3d 100644
@@ -8,6 +8,8 @@
 #include <net/addrconf.h>
 #include "rxe.h"
 #include "rxe_loc.h"
+#include "rxe_net.h"
+#include "rxe_ns.h"
 
 MODULE_AUTHOR("Bob Pearson, Frank Zago, John Groves, Kamal Heib");
 MODULE_DESCRIPTION("Soft RDMA transport");
@@ -200,6 +202,8 @@ void rxe_set_mtu(struct rxe_dev *rxe, unsigned int ndev_mtu)
 	port->mtu_cap = ib_mtu_enum_to_int(mtu);
 }
 
+static struct rdma_link_ops rxe_link_ops;
+
 /* called by ifc layer to create new rxe device.
  * The caller should allocate memory for rxe by calling ib_alloc_device.
  */
@@ -208,6 +212,7 @@ int rxe_add(struct rxe_dev *rxe, unsigned int mtu, const char *ibdev_name,
 {
 	rxe_init(rxe, ndev);
 	rxe_set_mtu(rxe, mtu);
+	rxe->ib_dev.link_ops = &rxe_link_ops;
 
 	return rxe_register_device(rxe, ibdev_name, ndev);
 }
@@ -231,6 +236,10 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 		goto err;
 	}
 
+	err = rxe_net_init(ndev);
+	if (err)
+		return err;
+
 	err = rxe_net_add(ibdev_name, ndev);
 	if (err) {
 		rxe_err("failed to add %s\n", ndev->name);
@@ -240,9 +249,17 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 	return err;
 }
 
+static int rxe_dellink(struct ib_device *dev)
+{
+	rxe_net_del(dev);
+
+	return 0;
+}
+
 static struct rdma_link_ops rxe_link_ops = {
 	.type = "rxe",
 	.newlink = rxe_newlink,
+	.dellink = rxe_dellink,
 };
 
 static int __init rxe_module_init(void)
@@ -253,15 +270,24 @@ static int __init rxe_module_init(void)
 	if (err)
 		return err;
 
-	err = rxe_net_init();
-	if (err) {
-		rxe_destroy_wq();
-		return err;
-	}
+	err = rxe_namespace_init();
+	if (err)
+		goto err_destroy_wq;
+
+	err = rxe_register_notifier();
+	if (err)
+		goto err_namespace_exit;
 
 	rdma_link_register(&rxe_link_ops);
+
 	pr_info("loaded\n");
 	return 0;
+
+err_namespace_exit:
+	rxe_namespace_exit();
+err_destroy_wq:
+	rxe_destroy_wq();
+	return err;
 }
 
 static void __exit rxe_module_exit(void)
@@ -271,6 +297,8 @@ static void __exit rxe_module_exit(void)
 	rxe_net_exit();
 	rxe_destroy_wq();
 
+	rxe_namespace_exit();
+
 	pr_info("unloaded\n");
 }
 
drivers/infiniband/sw/rxe/rxe_net.c +110 -35

269 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_net.h +3 -6
index 45d80d00f86b..56249677d692 100644
@@ -11,14 +11,11 @@
 #include <net/if_inet6.h>
 #include <linux/module.h>
 
-struct rxe_recv_sockets {
-	struct socket *sk4;
-	struct socket *sk6;
-};
-
 int rxe_net_add(const char *ibdev_name, struct net_device *ndev);
+void rxe_net_del(struct ib_device *dev);
 
-int rxe_net_init(void);
+int rxe_register_notifier(void);
+int rxe_net_init(struct net_device *ndev);
 void rxe_net_exit(void);
 
 #endif /* RXE_NET_H */
drivers/infiniband/sw/rxe/rxe_ns.c +27 -25

90 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_ns.h +1 -1
index da5bfcea1274..d68e1eaf8c66 100644
@@ -12,6 +12,6 @@ struct sock *rxe_ns_pernet_sk6(struct net *net);
 void rxe_ns_pernet_set_sk4(struct net *net, struct sock *sk);
 void rxe_ns_pernet_set_sk6(struct net *net, struct sock *sk);
 int __init rxe_namespace_init(void);
-void __exit rxe_namespace_exit(void);
+void rxe_namespace_exit(void);
 
 #endif /* RXE_NS_H */
Signature · 1 line
2.52.0
author
#6 lore raw

PATCH v2 4/4 RDMA/rxe: Add testcase for net namespace rxe

In reply to Zhu Yanjun

Add 4 testcases for rxe with net namespace.

---
 MAINTAINERS                                   |  1 +
 tools/testing/selftests/Makefile              |  1 +
 tools/testing/selftests/rdma/Makefile         |  7 ++
 tools/testing/selftests/rdma/config           |  3 +
 tools/testing/selftests/rdma/rxe_ipv6.sh      | 47 ++++++++++++++
 .../selftests/rdma/rxe_rping_between_netns.sh | 57 +++++++++++++++++
 .../selftests/rdma/rxe_socket_with_netns.sh   | 64 +++++++++++++++++++
 .../rdma/rxe_test_NETDEV_UNREGISTER.sh        | 38 +++++++++++
 8 files changed, 218 insertions(+)
 create mode 100644 tools/testing/selftests/rdma/Makefile
 create mode 100644 tools/testing/selftests/rdma/config
 create mode 100755 tools/testing/selftests/rdma/rxe_ipv6.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_rping_between_netns.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_socket_with_netns.sh
 create mode 100755 tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh
MAINTAINERS +1 -0
index 89007f9ed35e..3835857d0192 100644
@@ -24493,6 +24493,7 @@ L:	[email protected]
 S:	Supported
 F:	drivers/infiniband/sw/rxe/
 F:	include/uapi/rdma/rdma_user_rxe.h
+F:	tools/testing/selftests/rdma/
 
 SOFTLOGIC 6x10 MPEG CODEC
 M:	Bluecherry Maintainers <[email protected]>
tools/testing/selftests/Makefile +1 -0
index 450f13ba4cca..110e07c0d99d 100644
@@ -94,6 +94,7 @@ TARGETS += proc
 TARGETS += pstore
 TARGETS += ptrace
 TARGETS += openat2
+TARGETS += rdma
 TARGETS += resctrl
 TARGETS += riscv
 TARGETS += rlimits
tools/testing/selftests/rdma/Makefile new file +7 -0
new file mode 100644
index 000000000000..7dd7cba7a73c
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+TEST_PROGS := rxe_rping_between_netns.sh \
+		rxe_ipv6.sh \
+		rxe_socket_with_netns.sh \
+		rxe_test_NETDEV_UNREGISTER.sh
+
+include ../lib.mk
tools/testing/selftests/rdma/config new file +3 -0
new file mode 100644
index 000000000000..4ffb814e253b
@@ -0,0 +1,3 @@
+CONFIG_TUN
+CONFIG_VETH
+CONFIG_RDMA_RXE
tools/testing/selftests/rdma/rxe_ipv6.sh new file +47 -0

47 lines not on this page · raw message

tools/testing/selftests/rdma/rxe_rping_between_netns.sh new file +57 -0

57 lines not on this page · raw message

tools/testing/selftests/rdma/rxe_socket_with_netns.sh new file +64 -0

64 lines not on this page · raw message

tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh new file +38 -0
new file mode 100755
index 000000000000..c30ff905b121
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# Notes:
+#
+# 1. Before running this script, please disable the firewall, as it may
+# block UDP port 4791.
+
+# 2. This test script depends on the veth and tun drivers. Before running
+#  the script, please verify that both drivers are available by executing:
+#
+# modinfo tun
+# modinfo veth
+#
+# Make sure these commands return valid module information.
+
+# Trigger NETDEV_UNREGISTER
+exec > /dev/null
+ip tuntap add mode tun tun0
+ip -4 a
+ip addr add 1.1.1.1/24 dev tun0
+ip link set tun0 up
+ip -4 a
+rdma link add rxe0 type rxe netdev tun0
+rdma link
+ss -lun | grep :4791
+
+ip l
+ip addr del 1.1.1.1/24 dev tun0
+ip tuntap del mode tun tun0
+
+rdma link
+if ss -lun | grep :4791; then
+	echo "error"
+	exit 1
+fi
+
+modprobe -v -r tun
+modprobe -v -r rdma_rxe
Signature · 1 line
2.52.0
author
#7 lore raw
In reply to Zhu Yanjun
Quoted 24 lines · Zhu Yanjun

Currently rxe does not work correctly in network namespaces.

When the rdma_rxe module is loaded, a UDP socket listening on port 4791 is created in init_net. When users run:

ip link add ... type rxe

inside another network namespace, the RXE RDMA link is created but it cannot function properly because the underlying UDP socket belongs to init_net. Other network namespaces cannot use that socket.

To address this issue, this series introduces net namespace support for rxe and moves socket management to be per network namespace.

The series first introduces per-net namespace management for the IPv4 and IPv6 sockets used by rxe. The sockets are created when the network namespace becomes active and are released when the namespace is destroyed.

Based on this infrastructure, rxe RDMA links are then created and destroyed within each network namespace. This ensures that both the UDP sockets and RDMA links are correctly scoped to the namespace in which they are used.

Quoted 6 lines

With these changes, rxe RDMA links can be created and used both in init_net and in other network namespaces, and resources are properly cleaned up during namespace teardown.

The series also includes a selftest to verify RXE functionality in network namespaces.

The selftest result is as below:

"

# make -C tools/testing/selftests/ TARGETS=rdma run_tests

make: Entering directory '/root/Development/linux/tools/testing/selftests' make[1]: Nothing to be done for 'all'.
TAP version 13
1..4

# timeout set to 45
# selftests: rdma: rxe_rping_between_netns.sh
# server DISCONNECT EVENT...
# wait for RDMA_READ_ADV state 10
ok 1 selftests: rdma: rxe_rping_between_netns.sh
# timeout set to 45
# selftests: rdma: rxe_ipv6.sh
ok 2 selftests: rdma: rxe_ipv6.sh
# timeout set to 45
# selftests: rdma: rxe_socket_with_netns.sh
ok 3 selftests: rdma: rxe_socket_with_netns.sh
# timeout set to 45
# selftests: rdma: rxe_test_NETDEV_UNREGISTER.sh
ok 4 selftests: rdma: rxe_test_NETDEV_UNREGISTER.sh
make: Leaving directory '/root/Development/linux/tools/testing/selftests'

"

Zhu Yanjun

Quoted 35 lines

V1 -> V2: Fix the problems based on David Ahern.

Zhu Yanjun (4):
RDMA/nldev: Add dellink function pointer
RDMA/rxe: Add net namespace support for IPv4/IPv6 sockets RDMA/rxe: Support RDMA link creation and destruction per net namespace RDMA/rxe: Add testcase for net namespace rxe

  MAINTAINERS                                   |   1 +
  drivers/infiniband/core/nldev.c               |   6 +
  drivers/infiniband/sw/rxe/Makefile            |   3 +-
  drivers/infiniband/sw/rxe/rxe.c               |  38 ++++-
  drivers/infiniband/sw/rxe/rxe_net.c           | 144 +++++++++++++-----
  drivers/infiniband/sw/rxe/rxe_net.h           |   9 +-
  drivers/infiniband/sw/rxe/rxe_ns.c            | 136 +++++++++++++++++
  drivers/infiniband/sw/rxe/rxe_ns.h            |  17 +++
  include/rdma/rdma_netlink.h                   |   2 +
  tools/testing/selftests/Makefile              |   1 +
  tools/testing/selftests/rdma/Makefile         |   7 +
  tools/testing/selftests/rdma/config           |   3 +
  tools/testing/selftests/rdma/rxe_ipv6.sh      |  47 ++++++
  .../selftests/rdma/rxe_rping_between_netns.sh |  57 +++++++
  .../selftests/rdma/rxe_socket_with_netns.sh   |  64 ++++++++
  .../rdma/rxe_test_NETDEV_UNREGISTER.sh        |  38 +++++
  16 files changed, 526 insertions(+), 47 deletions(-)

create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
create mode 100644 tools/testing/selftests/rdma/Makefile
create mode 100644 tools/testing/selftests/rdma/config
create mode 100755 tools/testing/selftests/rdma/rxe_ipv6.sh create mode 100755 tools/testing/selftests/rdma/rxe_rping_between_netns.sh create mode 100755 tools/testing/selftests/rdma/rxe_socket_with_netns.sh create mode 100755 tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh

Signature · 2 lines
Best Regards,
Yanjun.Zhu
#4 lore raw

Re: [PATCH 3/4] RDMA/rxe: Support RDMA link creation and destruction per net namespace

In reply to Zhu Yanjun
kernel test robot noticed the following build warnings:

Hi Zhu,

kernel test robot noticed the following build warnings:

[auto build test WARNING on shuah-kselftest/next]
[also build test WARNING on shuah-kselftest/fixes linus/master v7.0-rc2 next-20260306] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Zhu-Yanjun/RDMA-nldev-Add-dellink-function-pointer/20260307-155949
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git next
patch link:    https://lore.kernel.org/r/20260307075611.3410-4-yanjun.zhu%40linux.dev
patch subject: [PATCH 3/4] RDMA/rxe: Support RDMA link creation and destruction per net namespace
config: loongarch-randconfig-001-20260308 (https://download.01.org/0day-ci/archive/20260308/[email protected]/config)
compiler: clang version 19.1.7 (https://github.com/llvm/llvm-project cd708029e0b2869e80abe31ddb175f7c35361f90)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260308/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>, old ones prefixed by <<):

>> WARNING: modpost: drivers/infiniband/sw/rxe/rdma_rxe: section mismatch in reference: rxe_namespace_exit+0x0 (section: .text) -> rxe_net_ops (section: .init.data)

WARNING: modpost: drivers/infiniband/sw/rxe/rdma_rxe: section mismatch in reference: rxe_namespace_exit+0x4 (section: .text) -> rxe_net_ops (section: .init.data)
ERROR: modpost: "sysfb_primary_display" [drivers/video/fbdev/core/fb.ko] undefined!

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
author
#5 lore raw

Re: [PATCH 3/4] RDMA/rxe: Support RDMA link creation and destruction per net namespace

Quoted 18 lines · kernel test robot

Hi Zhu,

kernel test robot noticed the following build warnings:

[auto build test WARNING on shuah-kselftest/next]
[also build test WARNING on shuah-kselftest/fixes linus/master v7.0-rc2 next-20260306] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Zhu-Yanjun/RDMA-nldev-Add-dellink-function-pointer/20260307-155949
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git next
patch link:    https://lore.kernel.org/r/20260307075611.3410-4-yanjun.zhu%40linux.dev
patch subject: [PATCH 3/4] RDMA/rxe: Support RDMA link creation and destruction per net namespace
config: loongarch-randconfig-001-20260308 (https://download.01.org/0day-ci/archive/20260308/[email protected]/config)
compiler: clang version 19.1.7 (https://github.com/llvm/llvm-project cd708029e0b2869e80abe31ddb175f7c35361f90)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260308/[email protected]/reproduce)
Quoted 8 lines

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>, old ones prefixed by <<):

Quoted 1 line
Quoted 1 line

WARNING: modpost: drivers/infiniband/sw/rxe/rdma_rxe: section mismatch in reference: rxe_namespace_exit+0x0 (section: .text) -> rxe_net_ops (section: .init.data)

Thanks. This warning is fixed. I will send the latest commit out very soon.

Zhu Yanjun

Quoted 3 lines

WARNING: modpost: drivers/infiniband/sw/rxe/rdma_rxe: section mismatch in reference: rxe_namespace_exit+0x4 (section: .text) -> rxe_net_ops (section: .init.data)
ERROR: modpost: "sysfb_primary_display" [drivers/video/fbdev/core/fb.ko] undefined!

Signature · 2 lines
Best Regards,
Yanjun.Zhu