Skip to contentSkip to conversation

selftests/bpf: modify_return: isolate fmod_ret hooks by pid

PATCH Superseded Sun Jian 3 participants 4 messages Mar 12 – Mar 19

Subsystems (3)
lore
Share & tools
lore

Sun Jian

author
#0 lore raw

PATCH 1/1 selftests/bpf: modify_return: isolate fmod_ret hooks by pid

modify_return's fmod_ret programs can override bpf_modify_return_test()'s return value, which conflicts with get_func_ip_test when selftests run in parallel.

Store current tgid in BSS and make modify_return hooks act only for that tgid. For other tasks, fentry/fexit become no-ops and fmod_ret returns the original ret.

Drop the serial-only restriction and remove the TODO comment.

Tested:
sudo ./test_progs -t modify_return
sudo ./test_progs -t get_func_ip_test sudo ./test_progs -j$(nproc) -t modify_return sudo ./test_progs -j$(nproc) -t get_func_ip_test

---
 .../selftests/bpf/prog_tests/modify_return.c  |  8 ++++---
 .../selftests/bpf/progs/modify_return.c       | 23 +++++++++++++++++++
 2 files changed, 28 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/prog_tests/modify_return.c +5 -3
index a70c99c2f8c8..4661d77ebdfc 100644
@@ -5,6 +5,7 @@
  */
 
 #include <test_progs.h>
+#include <unistd.h>
 #include "modify_return.skel.h"
 
 #define LOWER(x) ((x) & 0xffff)
@@ -23,11 +24,13 @@ static void run_test(__u32 input_retval, __u16 want_side_effect, __s16 want_ret)
 	if (!ASSERT_OK_PTR(skel, "skel_load"))
 		goto cleanup;
 
+	skel->bss->input_retval = input_retval;
+	skel->bss->test_pid = getpid();
+
 	err = modify_return__attach(skel);
 	if (!ASSERT_OK(err, "modify_return__attach failed"))
 		goto cleanup;
 
-	skel->bss->input_retval = input_retval;
 	prog_fd = bpf_program__fd(skel->progs.fmod_ret_test);
 	err = bpf_prog_test_run_opts(prog_fd, &topts);
 	ASSERT_OK(err, "test_run");
@@ -49,8 +52,7 @@ static void run_test(__u32 input_retval, __u16 want_side_effect, __s16 want_ret)
 	modify_return__destroy(skel);
 }
 
-/* TODO: conflict with get_func_ip_test */
-void serial_test_modify_return(void)
+void test_modify_return(void)
 {
 	run_test(0 /* input_retval */,
 		 2 /* want_side_effect */,
tools/testing/selftests/bpf/progs/modify_return.c +23 -0
index 3376d4849f58..5ff18ddb3050 100644
@@ -7,16 +7,29 @@
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
+#include <stdbool.h>
 
 char _license[] SEC("license") = "GPL";
 
 static int sequence = 0;
 __s32 input_retval = 0;
+__u32 test_pid = 0;
+
+static __always_inline bool match_pid(void)
+{
+	__u64 pid_tgid = bpf_get_current_pid_tgid();
+
+	if (!test_pid)
+		return false;
+	return (__u32)(pid_tgid >> 32) == test_pid;
+}
 
 __u64 fentry_result = 0;
 SEC("fentry/bpf_modify_return_test")
 int BPF_PROG(fentry_test, int a, __u64 b)
 {
+	if (!match_pid())
+		return 0;
 	sequence++;
 	fentry_result = (sequence == 1);
 	return 0;
@@ -26,6 +39,8 @@ __u64 fmod_ret_result = 0;
 SEC("fmod_ret/bpf_modify_return_test")
 int BPF_PROG(fmod_ret_test, int a, int *b, int ret)
 {
+	if (!match_pid())
+		return ret;
 	sequence++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result = (sequence == 2 && ret == 0);
@@ -36,6 +51,8 @@ __u64 fexit_result = 0;
 SEC("fexit/bpf_modify_return_test")
 int BPF_PROG(fexit_test, int a, __u64 b, int ret)
 {
+	if (!match_pid())
+		return 0;
 	sequence++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.
@@ -55,6 +72,8 @@ SEC("fentry/bpf_modify_return_test2")
 int BPF_PROG(fentry_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g)
 {
+	if (!match_pid())
+		return 0;
 	sequence2++;
 	fentry_result2 = (sequence2 == 1);
 	return 0;
@@ -65,6 +84,8 @@ SEC("fmod_ret/bpf_modify_return_test2")
 int BPF_PROG(fmod_ret_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (!match_pid())
+		return ret;
 	sequence2++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result2 = (sequence2 == 2 && ret == 0);
@@ -76,6 +97,8 @@ SEC("fexit/bpf_modify_return_test2")
 int BPF_PROG(fexit_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (!match_pid())
+		return 0;
 	sequence2++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.

base-commit: 80234b5ab240f52fa45d201e899e207b9265ef91

Signature · 1 line
2.43.0
#1 lore raw

On Thu, Mar 12, 2026 at 06:42:19PM +0800, Sun Jian wrote:

SNIP

Quoted 21 lines
tools/testing/selftests/bpf/progs/modify_return.c +8 -0
index 3376d4849f58..5ff18ddb3050 100644
@@ -7,16 +7,29 @@
 #include <linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
+#include <stdbool.h>
 
 char _license[] SEC("license") = "GPL";
 
 static int sequence = 0;
 __s32 input_retval = 0;
+__u32 test_pid = 0;
+
+static __always_inline bool match_pid(void)
+{
+	__u64 pid_tgid = bpf_get_current_pid_tgid();
+
+	if (!test_pid)

tools/testing/selftests/bpf/progs/modify_return.c line 32

Quoted 10 lines
tools/testing/selftests/bpf/progs/modify_return.c +5 -0
+		return false;
+	return (__u32)(pid_tgid >> 32) == test_pid;
+}
 
 __u64 fentry_result = 0;
 SEC("fentry/bpf_modify_return_test")
 int BPF_PROG(fentry_test, int a, __u64 b)
 {
+	if (!match_pid())
+		return 0;

I think just simple pid check like we do in other places should be enough:

	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
		return 0;

jirka

Quoted 54 lines
tools/testing/selftests/bpf/progs/modify_return.c +10 -0
 	sequence++;
 	fentry_result = (sequence == 1);
 	return 0;
@@ -26,6 +39,8 @@ __u64 fmod_ret_result = 0;
 SEC("fmod_ret/bpf_modify_return_test")
 int BPF_PROG(fmod_ret_test, int a, int *b, int ret)
 {
+	if (!match_pid())
+		return ret;
 	sequence++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result = (sequence == 2 && ret == 0);
@@ -36,6 +51,8 @@ __u64 fexit_result = 0;
 SEC("fexit/bpf_modify_return_test")
 int BPF_PROG(fexit_test, int a, __u64 b, int ret)
 {
+	if (!match_pid())
+		return 0;
 	sequence++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.
@@ -55,6 +72,8 @@ SEC("fentry/bpf_modify_return_test2")
 int BPF_PROG(fentry_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g)
 {
+	if (!match_pid())
+		return 0;
 	sequence2++;
 	fentry_result2 = (sequence2 == 1);
 	return 0;
@@ -65,6 +84,8 @@ SEC("fmod_ret/bpf_modify_return_test2")
 int BPF_PROG(fmod_ret_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (!match_pid())
+		return ret;
 	sequence2++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result2 = (sequence2 == 2 && ret == 0);
@@ -76,6 +97,8 @@ SEC("fexit/bpf_modify_return_test2")
 int BPF_PROG(fexit_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (!match_pid())
+		return 0;
 	sequence2++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.

base-commit: 80234b5ab240f52fa45d201e899e207b9265ef91

Signature · 1 line
2.43.0
author
#2 lore raw

PATCH v2 1/1 selftests/bpf: modify_return: isolate fmod_ret hooks by pid

In reply to Sun Jian

modify_return's fmod_ret programs can override bpf_modify_return_test()'s return value, which conflicts with get_func_ip_test when selftests run in parallel.

Store current tgid in BSS and make modify_return hooks act only for that tgid. For other tasks, fentry/fexit become no-ops and fmod_ret returns the original ret.

Drop the serial-only restriction and remove the TODO comment.

Tested:
sudo ./test_progs -t modify_return
sudo ./test_progs -t get_func_ip_test sudo ./test_progs -j$(nproc) -t modify_return sudo ./test_progs -j$(nproc) -t get_func_ip_test

---

v2:
- inline pid checks per suggestion from Jiri Olsa <[email protected]>

 .../selftests/bpf/prog_tests/modify_return.c        |  8 +++++---
 tools/testing/selftests/bpf/progs/modify_return.c   | 13 +++++++++++++
 2 files changed, 18 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/prog_tests/modify_return.c +5 -3
index a70c99c2f8c8..4661d77ebdfc 100644
@@ -5,6 +5,7 @@
  */
 
 #include <test_progs.h>
+#include <unistd.h>
 #include "modify_return.skel.h"
 
 #define LOWER(x) ((x) & 0xffff)
@@ -23,11 +24,13 @@ static void run_test(__u32 input_retval, __u16 want_side_effect, __s16 want_ret)
 	if (!ASSERT_OK_PTR(skel, "skel_load"))
 		goto cleanup;
 
+	skel->bss->input_retval = input_retval;
+	skel->bss->test_pid = getpid();
+
 	err = modify_return__attach(skel);
 	if (!ASSERT_OK(err, "modify_return__attach failed"))
 		goto cleanup;
 
-	skel->bss->input_retval = input_retval;
 	prog_fd = bpf_program__fd(skel->progs.fmod_ret_test);
 	err = bpf_prog_test_run_opts(prog_fd, &topts);
 	ASSERT_OK(err, "test_run");
@@ -49,8 +52,7 @@ static void run_test(__u32 input_retval, __u16 want_side_effect, __s16 want_ret)
 	modify_return__destroy(skel);
 }
 
-/* TODO: conflict with get_func_ip_test */
-void serial_test_modify_return(void)
+void test_modify_return(void)
 {
 	run_test(0 /* input_retval */,
 		 2 /* want_side_effect */,
tools/testing/selftests/bpf/progs/modify_return.c +13 -0
index 3376d4849f58..68fabd2efe8d 100644
@@ -12,11 +12,14 @@ char _license[] SEC("license") = "GPL";
 
 static int sequence = 0;
 __s32 input_retval = 0;
+__u32 test_pid = 0;
 
 __u64 fentry_result = 0;
 SEC("fentry/bpf_modify_return_test")
 int BPF_PROG(fentry_test, int a, __u64 b)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return 0;
 	sequence++;
 	fentry_result = (sequence == 1);
 	return 0;
@@ -26,6 +29,8 @@ __u64 fmod_ret_result = 0;
 SEC("fmod_ret/bpf_modify_return_test")
 int BPF_PROG(fmod_ret_test, int a, int *b, int ret)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return ret;
 	sequence++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result = (sequence == 2 && ret == 0);
@@ -36,6 +41,8 @@ __u64 fexit_result = 0;
 SEC("fexit/bpf_modify_return_test")
 int BPF_PROG(fexit_test, int a, __u64 b, int ret)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return 0;
 	sequence++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.
@@ -55,6 +62,8 @@ SEC("fentry/bpf_modify_return_test2")
 int BPF_PROG(fentry_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return 0;
 	sequence2++;
 	fentry_result2 = (sequence2 == 1);
 	return 0;
@@ -65,6 +74,8 @@ SEC("fmod_ret/bpf_modify_return_test2")
 int BPF_PROG(fmod_ret_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return ret;
 	sequence2++;
 	/* This is the first fmod_ret program, the ret passed should be 0 */
 	fmod_ret_result2 = (sequence2 == 2 && ret == 0);
@@ -76,6 +87,8 @@ SEC("fexit/bpf_modify_return_test2")
 int BPF_PROG(fexit_test2, int a, int *b, short c, int d, void *e, char f,
 	     int g, int ret)
 {
+	if (bpf_get_current_pid_tgid() >> 32 != test_pid)
+		return 0;
 	sequence2++;
 	/* If the input_reval is non-zero a successful modification should have
 	 * occurred.

base-commit: 80234b5ab240f52fa45d201e899e207b9265ef91

Signature · 1 line
2.43.0
#3 lore raw
This patch was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:

Hello:

This patch was applied to bpf/bpf-next.git (master) by Alexei Starovoitov <[email protected]>:

Quoted 9 lines · On Fri, 13 Mar 2026 11:45:40 +0800 you wrote:

modify_return's fmod_ret programs can override bpf_modify_return_test()'s return value, which conflicts with get_func_ip_test when selftests run in parallel.

Store current tgid in BSS and make modify_return hooks act only for that tgid. For other tasks, fentry/fexit become no-ops and fmod_ret returns the original ret.

[...]

Here is the summary with links:
- [v2] selftests/bpf: modify_return: isolate fmod_ret hooks by pid

    https://git.kernel.org/bpf/bpf-next/c/4a4fedb8a523

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html