Skip to contentSkip to conversation

Save Brightness on Macs

PATCH Superseded Atharva Tiwari 1 participant 3 messages Mar 15

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Save Brightness on Macs

Currently, when a Mac is rebooted, the display brightness does not reflect the level used during the previous boot. Instead, the brightness is reset to the value last stored by macOS, causing the system to ignore any changes made since that time.

We fix this by writing the brightness value to efivar 'backlight-level' at shutdown only, when it is changed since the last boot.

Changes in v2:
- Saved the brightness only when it is different than the previous boot.

Link to v1:
https://lore.kernel.org/all/[email protected]/

Atharva Tiwari (2):
efi: Save Brightness using EFI on Macs platform/apple-gmux: use apple_brightness to save brightness to EFI

 drivers/firmware/efi/Kconfig                  | 10 +++
 drivers/firmware/efi/Makefile                 |  1 +
 drivers/firmware/efi/apple-brightness.c       | 67 +++++++++++++++++++
 drivers/platform/x86/apple-gmux.c             | 21 ++++++
 .../linux/platform_data/apple-brightness.h    | 20 ++++++
 5 files changed, 119 insertions(+)
 create mode 100644 drivers/firmware/efi/apple-brightness.c
 create mode 100644 include/linux/platform_data/apple-brightness.h
Signature · 1 line
2.43.0
#1 lore raw

PATCH v2 1/2 efi: Save Brightness using EFI on Macs

Currently when a Mac reboots, the brightness is not the same as the previous boot instead its the same as the last time the Mac booted macOS.

We can fix this issue by saving the brightness level to the efivar backlight-level.

(tested on iMac20,1)

---
 drivers/firmware/efi/Kconfig                  | 10 +++
 drivers/firmware/efi/Makefile                 |  1 +
 drivers/firmware/efi/apple-brightness.c       | 67 +++++++++++++++++++
 .../linux/platform_data/apple-brightness.h    | 20 ++++++
 4 files changed, 98 insertions(+)
 create mode 100644 drivers/firmware/efi/apple-brightness.c
 create mode 100644 include/linux/platform_data/apple-brightness.h
drivers/firmware/efi/Kconfig +10 -0
index 29e0729299f5..dd0a9c9a772a 100644
@@ -167,6 +167,16 @@ config APPLE_PROPERTIES
 
 	  If unsure, say Y if you have a Mac.  Otherwise N.
 
+config APPLE_BRIGHTNESS
+	bool "Apple Backlight control for EFI"
+	depends on X86
+	help
+	  This will save the brightness level to EFI, so brightness
+	  level is preserved across reboots and shutdows. allowing
+	  for improved support of Apple hardware.
+
+	  If unsure, say Y if you have a Mac, Otherwise N.
+
 config RESET_ATTACK_MITIGATION
 	bool "Reset memory attack mitigation"
 	depends on EFI_STUB
drivers/firmware/efi/Makefile +1 -0
index 8efbcf699e4f..1f5705cc87a2 100644
@@ -26,6 +26,7 @@ obj-$(CONFIG_EFI_BOOTLOADER_CONTROL)	+= efibc.o
 obj-$(CONFIG_EFI_TEST)			+= test/
 obj-$(CONFIG_EFI_DEV_PATH_PARSER)	+= dev-path-parser.o
 obj-$(CONFIG_APPLE_PROPERTIES)		+= apple-properties.o
+obj-$(CONFIG_APPLE_BRIGHTNESS)		+= apple-brightness.o
 obj-$(CONFIG_EFI_RCI2_TABLE)		+= rci2-table.o
 obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE)	+= embedded-firmware.o
 obj-$(CONFIG_LOAD_UEFI_KEYS)		+= mokvar-table.o
drivers/firmware/efi/apple-brightness.c new file +67 -0

67 lines not on this page · raw message

include/linux/platform_data/apple-brightness.h new file +20 -0
new file mode 100644
index 000000000000..54e3f3f8aa1c
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * apple-brightness.h - EFI brightness saver for Macs
+ * Copyright (C) 2026 Atharva Tiwari <[email protected]>
+ */
+
+#ifndef _APPLE_BL_H_
+#define _APPLE_BL_H_
+
+#include <linux/backlight.h>
+#include <linux/efi.h>
+
+#define APPLE_BRIGHTNESS_NAME           L"backlight-level"
+#define APPLE_BRIGHTNESS_GUID           EFI_GUID(0x7c436110, 0xab2a, 0x4bbb, 0xa8, 0x80, 0xfe, 0x41, 0x99, 0x5c, 0x9f, 0x82)
+
+int apple_brightness_probe(struct backlight_device *bl,
+	int (*get_brightnessfn)(struct backlight_device *bl));
+
+void apple_brightness_shutdown(void);
+#endif /* _APPLE_BL_H */
Signature · 1 line
2.43.0
#2 lore raw

PATCH v2 2/2 platform/apple-gmux: use apple_brightness to save brightness to EFI

In reply to Atharva Tiwari

use apple_brightness to save brightness to EFI.

(tested on iMac20,1)

---
 drivers/platform/x86/apple-gmux.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/platform/x86/apple-gmux.c +21 -0
index 1417e230edbd..5a13c917c496 100644
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/debugfs.h>
+#include <linux/platform_data/apple-brightness.h>
 #include <acpi/video.h>
 #include <asm/io.h>
 
@@ -78,6 +79,8 @@ struct apple_gmux_data {
 	/* debugfs data */
 	u8 selected_port;
 	struct dentry *debug_dentry;
+
+	bool save_efi;
 };
 
 static struct apple_gmux_data *apple_gmux_data;
@@ -960,6 +963,13 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 	}
 
 	gmux_init_debugfs(gmux_data);
+	if (IS_ENABLED(CONFIG_APPLE_BRIGHTNESS)) {
+		ret = apple_brightness_probe(gmux_data->bdev, &gmux_get_brightness);
+		if (ret)
+			pr_warn("Unable to Enable EFI brightness save: %d\n", ret);
+
+		gmux_data->save_efi = true;
+	}
 	return 0;
 
 err_register_handler:
@@ -1012,6 +1022,16 @@ static void gmux_remove(struct pnp_dev *pnp)
 	kfree(gmux_data);
 }
 
+static void gmux_shutdown(struct pnp_dev *pnp)
+{
+	struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
+
+	if (gmux_data->save_efi)
+		apple_brightness_shutdown();
+
+	gmux_remove(pnp);
+}
+
 static const struct pnp_device_id gmux_device_ids[] = {
 	{GMUX_ACPI_HID, 0},
 	{"", 0}
@@ -1026,6 +1046,7 @@ static struct pnp_driver gmux_pnp_driver = {
 	.name		= "apple-gmux",
 	.probe		= gmux_probe,
 	.remove		= gmux_remove,
+	.shutdown	= gmux_shutdown,
 	.id_table	= gmux_device_ids,
 	.driver		= {
 			.pm = &gmux_dev_pm_ops,
Signature · 1 line
2.43.0