selftests/mm: skip several tests when thp is not available
Subsystems (4)
v2 cover selftests/mm: skip several tests when thp is not available
There are several tests requires transprarent hugepages, when run on thp disabled kernel such as realtime kernel, there will be false negative. Mark those tests as skip when thp is not available.
Changes in v2:
- replace 'false postive' with 'false negative' in cover letter
- patch 1 and patch 2 add reviewed-by/acked-by
- new patch 3 to add write_file() in vm_util as a common helper
- patch 4 removed the {} in if block, removed the write_file helper rename chunk in v1. Add reviewed-by
- patch 5 move the exit chunk to the front of ksft_print_headers() as suggested by David. Add review by.
Chunyu Hu (5):
selftests/mm/guard-regions: skip collapse test when thp not enabled selftests/mm: soft-dirty: skip two tests when thp is not available selftests/mm: move write_file helper to vm_util selftests/mm: split_huge_page_test: skip the test when thp is not
available
selftests/mm: transhuge_stress: skip the test when thp not available
tools/testing/selftests/mm/guard-regions.c | 4 ++++ tools/testing/selftests/mm/soft-dirty.c | 4 +++- .../selftests/mm/split_huge_page_test.c | 19 ++++----------- tools/testing/selftests/mm/thp_settings.c | 24 +------------------ tools/testing/selftests/mm/thp_settings.h | 1 - tools/testing/selftests/mm/transhuge-stress.c | 4 ++++ tools/testing/selftests/mm/vm_util.c | 16 +++++++++++++ tools/testing/selftests/mm/vm_util.h | 2 ++ 8 files changed, 34 insertions(+), 40 deletions(-)
base-commit: f338e77383789c0cae23ca3d48adcc5e9e137e3c
Signature · 1 line
2.53.0
PATCH v2 1/5 selftests/mm/guard-regions: skip collapse test when thp not enabled
When thp is not available, just skip the collape tests to avoid the false positive.
Without the change, run with a thp disabled kernel:
./run_vmtests.sh -t madv_guard
<snip/>
# # RUN guard_regions.file.multi_vma ...
# # OK guard_regions.file.multi_vma
# ok 89 guard_regions.file.multi_vma # # RUN guard_regions.file.basic ... # # OK guard_regions.file.basic # ok 90 guard_regions.file.basic # # FAILED: 87 / 90 tests passed. # # 17 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # # Totals: pass:70 fail:3 xfail:0 xpass:0 skip:17 error:0 # [FAIL] not ok 1 guard-regions # exit=1 hwpoison_inject # SUMMARY: PASS=0 SKIP=0 FAIL=1
With this change, run with thp disabled kernel:
./run_vmtests.sh -t madv_guard
<snip/>
# ok 90 guard_regions.file.basic # # PASSED: 90 / 90 tests passed. # # 20 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # # Totals: pass:70 fail:0 xfail:0 xpass:0 skip:20 error:0 # [PASS] ok 1 guard-regions hwpoison_inject # SUMMARY: PASS=1 SKIP=0 FAIL=0 1..1
---
Changes in v2:
- add reviewed by from Zi and Lorenzo
- add acked-by from David
--- tools/testing/selftests/mm/guard-regions.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/testing/selftests/mm/guard-regions.c +4 -0
@@ -21,6 +21,7 @@#include <sys/uio.h> #include <unistd.h> #include "vm_util.h" +#include "thp_settings.h" #include "../pidfd/pidfd.h"
@@ -2195,6 +2196,9 @@ TEST_F(guard_regions, collapse)char *ptr;int i; +if (!thp_is_enabled ()) +SKIP (return,"Transparent Hugepages not available\n" ); +/* Need file to be correct size for tests for non-anon. */ if (variant->backing !=ANON_BACKED )ASSERT_EQ (ftruncate (self->fd, size),0 );
base-commit: f338e77383789c0cae23ca3d48adcc5e9e137e3c
Signature · 1 line
2.53.0
Re: [PATCH v2 1/5] selftests/mm/guard-regions: skip collapse test when thp not enabled
Quoted 2 lines · Chunyu Hu
When thp is not available, just skip the collape tests to avoid the false positive.
... to avoid the false negative
Quoted 9 lines
Without the change, run with a thp disabled kernel:
./run_vmtests.sh -tmadv_guard
<snip/>
# # RUN guard_regions.file.multi_vma ...
# # OK guard_regions.file.multi_vma# ok 89 guard_regions.file.multi_vma # # RUN guard_regions.file.basic ... # # OK guard_regions.file.basic # ok 90 guard_regions.file.basic
It would be useful to include output of two failing THP tests rather then just the output of the last two test.
You can also add '-n' option to run_vmtest.sh to reduce amount of leading #, but for that I don't feel strongly.
With that updated
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH v2 1/5] selftests/mm/guard-regions: skip collapse test when thp not enabled
Quoted 5 lines · Mike Rapoport
Quoted 2 lines · Chunyu Hu
When thp is not available, just skip the collape tests to avoid the false positive.
... to avoid the false negative
Oops, I missed this one. Will update.
Quoted 11 lines
Quoted 10 lines
Without the change, run with a thp disabled kernel:
./run_vmtests.sh -tmadv_guard
<snip/>
# # RUN guard_regions.file.multi_vma ...
# # OK guard_regions.file.multi_vma# ok 89 guard_regions.file.multi_vma # # RUN guard_regions.file.basic ... # # OK guard_regions.file.basic # ok 90 guard_regions.file.basic
Quoted 2 lines
It would be useful to include output of two failing THP tests rather then just the output of the last two test.
Will update in next version.
Quoted 2 lines
You can also add '-n' option to
run_vmtest.shto reduce amount of leading #, but for that I don't feel strongly.
Good to know. Thanks.
Quoted 9 lines
With that updated
Reviewed-by Mike Rapoport (Microsoft) <[email protected]>Signature · 2 lines
Sincerely yours, Mike.
PATCH v2 2/5 selftests/mm: soft-dirty: skip two tests when thp is not available
In reply to Chunyu HuThe test_hugepage test contain two sub tests. If just reporting one skip when thp not available, there will be error in the log because the test count don't match the test plan. Change to skip two tests by running the ksft_test_result_skip twice in this case.
Without the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty # -------------------- # TAP version 13 # 1..19 # ok 1 Test test_simple # ok 2 Test test_vma_reuse dirty bit of allocated page # ok 3 Test test_vma_reuse dirty bit of reused address page # ok 4 # SKIP Transparent Hugepages not available # ok 5 Test test_mprotect-anon dirty bit of new written page # ok 6 Test test_mprotect-anon soft-dirty clear after clear_refs # ok 7 Test test_mprotect-anon soft-dirty clear after marking RO # ok 8 Test test_mprotect-anon soft-dirty clear after marking RW # ok 9 Test test_mprotect-anon soft-dirty after rewritten # ok 10 Test test_mprotect-file dirty bit of new written page # ok 11 Test test_mprotect-file soft-dirty clear after clear_refs # ok 12 Test test_mprotect-file soft-dirty clear after marking RO # ok 13 Test test_mprotect-file soft-dirty clear after marking RW # ok 14 Test test_mprotect-file soft-dirty after rewritten # ok 15 Test test_merge-anon soft-dirty after remap merge 1st pg # ok 16 Test test_merge-anon soft-dirty after remap merge 2nd pg # ok 17 Test test_merge-anon soft-dirty after mprotect merge 1st pg # ok 18 Test test_merge-anon soft-dirty after mprotect merge 2nd pg # # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # # Planned tests != run tests (19 != 18) # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0 # [FAIL] not ok 52 soft-dirty # exit=1
With the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty # TAP version 13 # -------------------- # running ./soft-dirty # -------------------- # TAP version 13 # 1..19 # ok 1 Test test_simple # ok 2 Test test_vma_reuse dirty bit of allocated page # ok 3 Test test_vma_reuse dirty bit of reused address page # # Transparent Hugepages not available # ok 4 # SKIP Test test_hugepage huge page allocation # ok 5 # SKIP Test test_hugepage huge page dirty bit # ok 6 Test test_mprotect-anon dirty bit of new written page # ok 7 Test test_mprotect-anon soft-dirty clear after clear_refs # ok 8 Test test_mprotect-anon soft-dirty clear after marking RO # ok 9 Test test_mprotect-anon soft-dirty clear after marking RW # ok 10 Test test_mprotect-anon soft-dirty after rewritten # ok 11 Test test_mprotect-file dirty bit of new written page # ok 12 Test test_mprotect-file soft-dirty clear after clear_refs # ok 13 Test test_mprotect-file soft-dirty clear after marking RO # ok 14 Test test_mprotect-file soft-dirty clear after marking RW # ok 15 Test test_mprotect-file soft-dirty after rewritten # ok 16 Test test_merge-anon soft-dirty after remap merge 1st pg # ok 17 Test test_merge-anon soft-dirty after remap merge 2nd pg # ok 18 Test test_merge-anon soft-dirty after mprotect merge 1st pg # ok 19 Test test_merge-anon soft-dirty after mprotect merge 2nd pg # # 2 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:2 error:0 # [PASS] ok 1 soft-dirty hwpoison_inject # SUMMARY: PASS=1 SKIP=0 FAIL=0 1..1
---
Changes in v2:
- add reviewed by from Lorenzo and Zi
- add acked-by from David
--- tools/testing/selftests/mm/soft-dirty.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/testing/selftests/mm/soft-dirty.c +3 -1
@@ -82,7 +82,9 @@ static void test_hugepage(int pagemap_fd, int pagesize)int i, ret;if (!thp_is_enabled ()) { -ksft_test_result_skip ("Transparent Hugepages not available\n" ); +ksft_print_msg ("Transparent Hugepages not available\n" ); +ksft_test_result_skip ("Test %s huge page allocation\n" , __func__); +ksft_test_result_skip ("Test %s huge page dirty bit\n" , __func__);return ; }
Signature · 1 line
2.53.0
Re: [PATCH v2 2/5] selftests/mm: soft-dirty: skip two tests when thp is not available
Quoted 4 lines · Chunyu Hu
The
test_hugepagetest contain two sub tests. If just reporting one skip when thp not available, there will be error in the log because the test count don't match the test plan. Change to skip two tests by running theksft_test_result_skiptwice in this case.
...
Quoted 18 lines
Reviewed-by Lorenzo Stoakes (Oracle) <[email protected]>Reviewed-by Zi Yan <[email protected]>CC Li Wang <[email protected]>Signed-off-by Chunyu Hu <[email protected]>---
Changes in v2:
- add reviewed by from Lorenzo and Zi
- add acked-by from David--- tools/testing/selftests/mm/soft-dirty.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/mm/soft-dirty.c +0
-0
tools/testing/selftests/mm/soft-dirty.c static void test_hugepage(int pagemap_fd, int pagesize) · line 87
Quoted 7 lines
tools/testing/selftests/mm/soft-dirty.c +3
-1@@ -82,7 +82,9 @@ static void test_hugepage(int pagemap_fd, int pagesize)int i, ret;if (!thp_is_enabled ()) { -ksft_test_result_skip ("Transparent Hugepages not available\n" ); +ksft_print_msg ("Transparent Hugepages not available\n" ); +ksft_test_result_skip ("Test %s huge page allocation\n" , __func__); +ksft_test_result_skip ("Test %s huge page dirty bit\n" , __func__);
There's already similar block when the page is not collapsed, but reworking the test flow can be done on top as a separate commit.
Feel free to add
Signature · 2 lines
Sincerely yours, Mike.
PATCH v2 3/5 selftests/mm: move write_file helper to vm_util
In reply to Chunyu Huthp_settings provides write_file() helper for safely writing to a file and exit when write failure happens. It's a very low level helper and many sub tests need such a helper, not only thp tests.
split_huge_page_test also defines a write_file locally. The two have minior differences in return type and used exit api. And there would be conflicts if split_huge_page_test wanted to include thp_settings.h because of different prototype, making it less convenient.
It's possisble to merge the two, although some tests don't use the kselftest infrastrucutre for testing. It would also work when using the ksft_exit_msg() to exit in my test, as the counters are all zero. Output will be like:
TAP version 13
1..62
Bail out! /proc/sys/vm/drop_caches1 open failed: No such file or directory # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
So here just leave one version of write_file, and move it into the vm_util. This make it easy to maitain and user could just include one vm_util.h when then don't need thp setting helpers. Keep the prototype of returning the written bytes num.
---
Changes in v2:
new patch from v2
--- .../selftests/mm/split_huge_page_test.c | 15 ------------ tools/testing/selftests/mm/thp_settings.c | 24 +------------------ tools/testing/selftests/mm/thp_settings.h | 1 - tools/testing/selftests/mm/vm_util.c | 16 +++++++++++++ tools/testing/selftests/mm/vm_util.h | 2 ++ 5 files changed, 19 insertions(+), 39 deletions(-)
tools/testing/selftests/mm/split_huge_page_test.c +0 -15
@@ -255,21 +255,6 @@ static int check_after_split_folio_orders(char *vaddr_start, size_t len,return status; } -static void write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) -ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) -ksft_exit_fail_msg ("Write failed\n" ); -} -static void write_debugfs (const char *fmt, ...) {char input[INPUT_MAX ];
tools/testing/selftests/mm/thp_settings.c +1 -23
@@ -6,6 +6,7 @@#include <string.h> #include <unistd.h> +#include "vm_util.h" #include "thp_settings.h" #define THP_SYSFS "/sys/kernel/mm/transparent_hugepage/"
@@ -64,29 +65,6 @@ int read_file(const char *path, char *buf, size_t buflen)return (unsigned int ) numread; } -int write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) { -printf ("open(%s)\n" , path); -exit (EXIT_FAILURE ); -return 0 ; - } - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) { -printf ("write(%s)\n" , buf); -exit (EXIT_FAILURE ); -return 0 ; - } - -return (unsigned int ) numwritten; -} -unsigned long read_num (const char *path) {char buf[21 ];
tools/testing/selftests/mm/thp_settings.h +0 -1
@@ -63,7 +63,6 @@ struct thp_settings { };int read_file (const char *path,char *buf,size_t buflen); -int write_file (const char *path,const char *buf,size_t buflen);unsigned long read_num (const char *path);void write_num (const char *path,unsigned long num);
tools/testing/selftests/mm/vm_util.c +16 -0
@@ -764,3 +764,19 @@ int unpoison_memory(unsigned long pfn)return ret >0 ?0 : -errno; } + +unsigned int write_file (const char *path,const char *buf,size_t buflen) +{ +int fd; +ssize_t numwritten; + + fd =open (path,O_WRONLY ); +if (fd ==-1 ) +ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); + + numwritten =write (fd, buf, buflen -1 ); +close (fd); +if (numwritten <1 ) +ksft_exit_fail_msg ("Write failed\n" ); +return (unsigned int ) numwritten; +}
tools/testing/selftests/mm/vm_util.h +2 -0
@@ -166,3 +166,5 @@ int unpoison_memory(unsigned long pfn);#define PAGEMAP_PRESENT (ent) (((ent) & (1ull << 63)) != 0)#define PAGEMAP_PFN (ent) ((ent) & ((1ull << 55) - 1)) + +unsigned int write_file (const char *path,const char *buf,size_t buflen);
Signature · 1 line
2.53.0
Mike Rapoport
reviewerRe: [PATCH v2 3/5] selftests/mm: move write_file helper to vm_util
Quoted 130 lines · Chunyu Hu
thp_settingsprovideswrite_file()helper for safely writing to a file and exit when write failure happens. It's a very low level helper and many sub tests need such a helper, not only thp tests.
split_huge_page_testalso defines awrite_filelocally. The two have minior differences in return type and used exit api. And there would be conflicts ifsplit_huge_page_testwanted to includethp_settings.hbecause of different prototype, making it less convenient.It's possisble to merge the two, although some tests don't use the kselftest infrastrucutre for testing. It would also work when using the
ksft_exit_msg()to exit in my test, as the counters are all zero. Output will be like:TAP version 13
1..62
Bail out!/proc/sys/vm/drop_caches1open failed: No such file or directory # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0So here just leave one version of
write_file, and move it into thevm_util. This make it easy to maitain and user could just include onevm_util.hwhen then don't need thp setting helpers. Keep the prototype of returning the written bytes num.Suggested-by Mike Rapoport <[email protected]>Signed-off-by Chunyu Hu <[email protected]>---
Changes in v2:
new patch from v2--- .../selftests/mm/split_huge_page_test.c | 15 ------------ tools/testing/selftests/mm/thp_settings.c | 24 +------------------ tools/testing/selftests/mm/thp_settings.h | 1 - tools/testing/selftests/mm/vm_util.c | 16 +++++++++++++ tools/testing/selftests/mm/vm_util.h | 2 ++ 5 files changed, 19 insertions(+), 39 deletions(-)tools/testing/selftests/mm/split_huge_page_test.c +0
-15@@ -255,21 +255,6 @@ static int check_after_split_folio_orders(char *vaddr_start, size_t len,return status; } -static void write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) -ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) -ksft_exit_fail_msg ("Write failed\n" ); -} -static void write_debugfs (const char *fmt, ...) {char input[INPUT_MAX ];tools/testing/selftests/mm/thp_settings.c +1
-23@@ -6,6 +6,7 @@#include <string.h> #include <unistd.h> +#include "vm_util.h" #include "thp_settings.h" #define THP_SYSFS "/sys/kernel/mm/transparent_hugepage/"@@ -64,29 +65,6 @@ int read_file(const char *path, char *buf, size_t buflen)return (unsigned int ) numread; } -int write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) { -printf ("open(%s)\n" , path); -exit (EXIT_FAILURE ); -return 0 ; - } - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) { -printf ("write(%s)\n" , buf); -exit (EXIT_FAILURE ); -return 0 ; - } - -return (unsigned int ) numwritten; -} -unsigned long read_num (const char *path) {char buf[21 ];tools/testing/selftests/mm/thp_settings.h +0
-1@@ -63,7 +63,6 @@ struct thp_settings { };int read_file (const char *path,char *buf,size_t buflen); -int write_file (const char *path,const char *buf,size_t buflen);unsigned long read_num (const char *path);void write_num (const char *path,unsigned long num);tools/testing/selftests/mm/vm_util.c +5
-0@@ -764,3 +764,19 @@ int unpoison_memory(unsigned long pfn)return ret >0 ?0 : -errno; } + +unsigned int write_file (const char *path,const char *buf,size_t buflen) +{ +int fd; +ssize_t numwritten;
tools/testing/selftests/mm/vm_util.c int unpoison_memory(unsigned long pfn) · line 781
Quoted 10 lines
tools/testing/selftests/mm/vm_util.c +10
-0+ + fd =open (path,O_WRONLY ); +if (fd ==-1 ) +ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); + + numwritten =write (fd, buf, buflen -1 ); +close (fd); +if (numwritten <1 ) +ksft_exit_fail_msg ("Write failed\n" ); +return (unsigned int ) numwritten;
If we exit on any failure, the function can be void just like in split_huge_page_test.c. This will also simplify write_num() and read_num() in thp_settigns.c
Quoted 14 lines
tools/testing/selftests/mm/vm_util.c +1
-0+}tools/testing/selftests/mm/vm_util.h +2
-0@@ -166,3 +166,5 @@ int unpoison_memory(unsigned long pfn);#define PAGEMAP_PRESENT (ent) (((ent) & (1ull << 63)) != 0)#define PAGEMAP_PFN (ent) ((ent) & ((1ull << 55) - 1)) + +unsigned int write_file (const char *path,const char *buf,size_t buflen);Signature · 1 line
2.53.0
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH v2 3/5] selftests/mm: move write_file helper to vm_util
Quoted 137 lines · Mike Rapoport
Quoted 136 lines · Chunyu Hu
thp_settingsprovideswrite_file()helper for safely writing to a file and exit when write failure happens. It's a very low level helper and many sub tests need such a helper, not only thp tests.
split_huge_page_testalso defines awrite_filelocally. The two have minior differences in return type and used exit api. And there would be conflicts ifsplit_huge_page_testwanted to includethp_settings.hbecause of different prototype, making it less convenient.It's possisble to merge the two, although some tests don't use the kselftest infrastrucutre for testing. It would also work when using the
ksft_exit_msg()to exit in my test, as the counters are all zero. Output will be like:TAP version 13
1..62
Bail out!/proc/sys/vm/drop_caches1open failed: No such file or directory # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0So here just leave one version of
write_file, and move it into thevm_util. This make it easy to maitain and user could just include onevm_util.hwhen then don't need thp setting helpers. Keep the prototype of returning the written bytes num.Suggested-by Mike Rapoport <[email protected]>Signed-off-by Chunyu Hu <[email protected]>---
Changes in v2:
new patch from v2--- .../selftests/mm/split_huge_page_test.c | 15 ------------ tools/testing/selftests/mm/thp_settings.c | 24 +------------------ tools/testing/selftests/mm/thp_settings.h | 1 - tools/testing/selftests/mm/vm_util.c | 16 +++++++++++++ tools/testing/selftests/mm/vm_util.h | 2 ++ 5 files changed, 19 insertions(+), 39 deletions(-)tools/testing/selftests/mm/split_huge_page_test.c +0
-15@@ -255,21 +255,6 @@ static int check_after_split_folio_orders(char *vaddr_start, size_t len,return status; } -static void write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) -ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) -ksft_exit_fail_msg ("Write failed\n" ); -} -static void write_debugfs (const char *fmt, ...) {char input[INPUT_MAX ];tools/testing/selftests/mm/thp_settings.c +1
-23@@ -6,6 +6,7 @@#include <string.h> #include <unistd.h> +#include "vm_util.h" #include "thp_settings.h" #define THP_SYSFS "/sys/kernel/mm/transparent_hugepage/"@@ -64,29 +65,6 @@ int read_file(const char *path, char *buf, size_t buflen)return (unsigned int ) numread; } -int write_file (const char *path,const char *buf,size_t buflen) -{ -int fd; -ssize_t numwritten; - - fd =open (path,O_WRONLY ); -if (fd ==-1 ) { -printf ("open(%s)\n" , path); -exit (EXIT_FAILURE ); -return 0 ; - } - - numwritten =write (fd, buf, buflen -1 ); -close (fd); -if (numwritten <1 ) { -printf ("write(%s)\n" , buf); -exit (EXIT_FAILURE ); -return 0 ; - } - -return (unsigned int ) numwritten; -} -unsigned long read_num (const char *path) {char buf[21 ];tools/testing/selftests/mm/thp_settings.h +0
-1@@ -63,7 +63,6 @@ struct thp_settings { };int read_file (const char *path,char *buf,size_t buflen); -int write_file (const char *path,const char *buf,size_t buflen);unsigned long read_num (const char *path);void write_num (const char *path,unsigned long num);tools/testing/selftests/mm/vm_util.c +11
-0@@ -764,3 +764,19 @@ int unpoison_memory(unsigned long pfn)return ret >0 ?0 : -errno; } + +unsigned int write_file (const char *path,const char *buf,size_t buflen) +{ +int fd; +ssize_t numwritten; + + fd =open (path,O_WRONLY ); +if (fd ==-1 ) +ksft_exit_fail_msg ("%s open failed: %s\n" , path,strerror (errno)); + + numwritten =write (fd, buf, buflen -1 );
Quoted 8 lines
tools/testing/selftests/mm/vm_util.c int unpoison_memory(unsigned long pfn) · line 781
Quoted 4 lines
tools/testing/selftests/mm/vm_util.c +4
-0+close (fd); +if (numwritten <1 ) +ksft_exit_fail_msg ("Write failed\n" ); +return (unsigned int ) numwritten;If we exit on any failure, the function can be void just like in
split_huge_page_test.c. This will also simplifywrite_num()andread_num()inthp_settigns.c
Good point. I will change it to void. I wont touch read_file() here.
Quoted 20 lines
Quoted 15 lines
tools/testing/selftests/mm/vm_util.c +1
-0+}tools/testing/selftests/mm/vm_util.h +2
-0@@ -166,3 +166,5 @@ int unpoison_memory(unsigned long pfn);#define PAGEMAP_PRESENT (ent) (((ent) & (1ull << 63)) != 0)#define PAGEMAP_PFN (ent) ((ent) & ((1ull << 55) - 1)) + +unsigned int write_file (const char *path,const char *buf,size_t buflen);Signature · 1 line
2.53.0Signature · 2 lines
Sincerely yours, Mike.
PATCH v2 4/5 selftests/mm: split_huge_page_test: skip the test when thp is not available
In reply to Chunyu HuWhen thp is not enabled on some kernel config such as realtime kernel, the test will report failure. Fix the false positive by skipping the test directly when thp is not enabled.
Tested with thp disabled kernel:
Before The fix:
# --------------------------------------------------
# running ./split_huge_page_test /tmp/xfs_dir_Ywup9p # -------------------------------------------------- # TAP version 13 # Bail out! Reading PMD pagesize failed # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 61 split_huge_page_test /tmp/xfs_dir_Ywup9p # exit=1
After the fix:
# --------------------------------------------------
# running ./split_huge_page_test /tmp/xfs_dir_YHPUPl # -------------------------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 6 split_huge_page_test /tmp/xfs_dir_YHPUPl # SKIP
---
V2 changes:
- removed the {} in if block
- removed the write_file helper rename chunk, as there's a new patch 3 to resolve the conflict with thp_settings.h by moving it to vm_util.
- Add reviewed by from Zi and Lorenzo
--- tools/testing/selftests/mm/split_huge_page_test.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/testing/selftests/mm/split_huge_page_test.c +4 -0
@@ -21,6 +21,7 @@#include <time.h> #include "vm_util.h" #include "kselftest.h" +#include "thp_settings.h" uint64_t pagesize;unsigned int pageshift;
@@ -757,6 +758,9 @@ int main(int argc, char **argv)ksft_finished (); } +if (!thp_is_enabled ()) +ksft_exit_skip ("Transparent Hugepages not available\n" ); +if (argc >1 ) optional_xfs_path = argv[1 ];
Signature · 1 line
2.53.0
Re: [PATCH v2 4/5] selftests/mm: split_huge_page_test: skip the test when thp is not available
Quoted 24 lines · Chunyu Hu
When thp is not enabled on some kernel config such as realtime kernel, the test will report failure. Fix the false positive by skipping the test directly when thp is not enabled.
Tested with thp disabled kernel:
Before The fix:
# --------------------------------------------------# running ./split_huge_page_test /tmp/xfs_dir_Ywup9p # -------------------------------------------------- # TAP version 13 # Bail out! Reading PMD pagesize failed # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 61 split_huge_page_test /tmp/xfs_dir_Ywup9p # exit=1After the fix:
# --------------------------------------------------# running ./split_huge_page_test /tmp/xfs_dir_YHPUPl # -------------------------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 6 split_huge_page_test /tmp/xfs_dir_YHPUPl # SKIP
Quoted 4 lines
Reviewed-by Lorenzo Stoakes (Oracle) <[email protected]>Reviewed-by Zi Yan <[email protected]>CC Li Wang <[email protected]>Signed-off-by Chunyu Hu <[email protected]>
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH v2 4/5] selftests/mm: split_huge_page_test: skip the test when thp is not available
In reply to Chunyu HuQuoted 24 lines · Chunyu Hu
When thp is not enabled on some kernel config such as realtime kernel, the test will report failure. Fix the false positive by skipping the test directly when thp is not enabled.
Tested with thp disabled kernel:
Before The fix:
# --------------------------------------------------# running ./split_huge_page_test /tmp/xfs_dir_Ywup9p # -------------------------------------------------- # TAP version 13 # Bail out! Reading PMD pagesize failed # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 61 split_huge_page_test /tmp/xfs_dir_Ywup9p # exit=1After the fix:
# --------------------------------------------------# running ./split_huge_page_test /tmp/xfs_dir_YHPUPl # -------------------------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 6 split_huge_page_test /tmp/xfs_dir_YHPUPl # SKIP
Quoted 5 lines
Reviewed-by Lorenzo Stoakes (Oracle) <[email protected]>Reviewed-by Zi Yan <[email protected]>CC Li Wang <[email protected]>Signed-off-by Chunyu Hu <[email protected]>---
Signature · 3 lines
Cheers, David
PATCH v2 5/5 selftests/mm: transhuge_stress: skip the test when thp not available
In reply to Chunyu HuThe test requires thp, skip the test when thp is not available to avoid false positive.
Tested with thp disabled kernel.
Before the fix:
# --------------------------------
# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..1 # transhuge-stress: allocate 1453 transhuge pages, using 2907 MiB virtual memory and 11 MiB of ram # Bail out! MADV_HUGEPAGE# Planned tests != run tests (1 != 0) # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 60 transhuge-stress -d 20 # exit=1
After the fix:
# --------------------------------
# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 5 transhuge-stress -d 20 # SKIP
---
V2 changes:
- Move the exit chunk to the front of ksft_print_headers() as suggested by David.
- Add reviewed by from Zi and Lorenzo
--- tools/testing/selftests/mm/transhuge-stress.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/testing/selftests/mm/transhuge-stress.c +4 -0
@@ -17,6 +17,7 @@#include <sys/mman.h> #include "vm_util.h" #include "kselftest.h" +#include "thp_settings.h" int backing_fd =-1 ;int mmap_flags =MAP_ANONYMOUS |MAP_NORESERVE |MAP_PRIVATE ;
@@ -37,6 +38,9 @@ int main(int argc, char **argv)ksft_print_header (); +if (!thp_is_enabled ()) +ksft_exit_skip ("Transparent Hugepages not available\n" ); + ram =sysconf (_SC_PHYS_PAGES);if (ram >SIZE_MAX /psize () /4 ) ram =SIZE_MAX /4 ;
Signature · 1 line
2.53.0
Re: [PATCH v2 5/5] selftests/mm: transhuge_stress: skip the test when thp not available
Quoted 25 lines · Chunyu Hu
The test requires thp, skip the test when thp is not available to avoid false positive.
Tested with thp disabled kernel.
Before the fix:
# --------------------------------# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..1 # transhuge-stress: allocate 1453 transhuge pages, using 2907 MiB virtual memory and 11 MiB of ram # Bail out! MADV_HUGEPAGE# Planned tests != run tests (1 != 0) # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 60 transhuge-stress -d 20 # exit=1After the fix:
# --------------------------------# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 5 transhuge-stress -d 20 # SKIP
Quoted 4 lines
Reviewed-by Lorenzo Stoakes (Oracle) <[email protected]>Reviewed-by Zi Yan <[email protected]>CC Li Wang <[email protected]>Signed-off-by Chunyu Hu <[email protected]>
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH v2 5/5] selftests/mm: transhuge_stress: skip the test when thp not available
In reply to Chunyu HuQuoted 25 lines · Chunyu Hu
The test requires thp, skip the test when thp is not available to avoid false positive.
Tested with thp disabled kernel.
Before the fix:
# --------------------------------# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..1 # transhuge-stress: allocate 1453 transhuge pages, using 2907 MiB virtual memory and 11 MiB of ram # Bail out! MADV_HUGEPAGE# Planned tests != run tests (1 != 0) # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 # [FAIL] not ok 60 transhuge-stress -d 20 # exit=1After the fix:
# --------------------------------# running ./transhuge-stress -d 20 # -------------------------------- # TAP version 13 # 1..0 # SKIP Transparent Hugepages not available # [SKIP] ok 5 transhuge-stress -d 20 # SKIP
Quoted 5 lines
Reviewed-by Lorenzo Stoakes (Oracle) <[email protected]>Reviewed-by Zi Yan <[email protected]>CC Li Wang <[email protected]>Signed-off-by Chunyu Hu <[email protected]>---
Signature · 3 lines
Cheers, David