FAILED: patch "[PATCH] i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path" failed to apply to 6.6-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x f3bcbfe1b8b0b836b772927f75f8cb6e759eb00a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026031746-compel-next-f350@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f3bcbfe1b8b0b836b772927f75f8cb6e759eb00a Mon Sep 17 00:00:00 2001
From: Adrian Hunter <[email protected]>
Date: Fri, 6 Mar 2026 09:24:40 +0200
Subject: [PATCH] i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
Prepare for fixing a race in the DMA ring enqueue path when handling parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer() and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage around the enqueue operation without performing DMA mapping under the spinlock.
No functional change is intended in this patch.
drivers/i3c/master/mipi-i3c-hci/dma.c +33 -16
@@ -439,6 +439,33 @@ static void hci_dma_unmap_xfer(struct i3c_hci *hci, } } +static struct i3c_dma *hci_dma_map_xfer (struct device *dev,struct hci_xfer *xfer) +{ +enum dma_data_direction dir = xfer->rnw ?DMA_FROM_DEVICE :DMA_TO_DEVICE ; +bool need_bounce =device_iommu_mapped (dev) && xfer->rnw && (xfer->data_len &3 ); + +return i3c_master_dma_map_single (dev, xfer->data, xfer->data_len, need_bounce, dir); +} + +static int hci_dma_map_xfer_list (struct i3c_hci *hci,struct device *dev, +struct hci_xfer *xfer_list,int n) +{ +for (int i =0 ; i < n; i++) { +struct hci_xfer *xfer = xfer_list + i; + +if (!xfer->data) +continue ; + + xfer->dma =hci_dma_map_xfer (dev, xfer); +if (!xfer->dma) { +hci_dma_unmap_xfer (hci, xfer_list, i); +return -ENOMEM ; + } + } + +return 0 ; +} +static int hci_dma_queue_xfer (struct i3c_hci *hci,struct hci_xfer *xfer_list,int n) {
@@ -446,6 +473,11 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,struct hci_rh_data *rh;unsigned int i, ring, enqueue_ptr;u32 op1_val, op2_val; +int ret; + + ret =hci_dma_map_xfer_list (hci, rings->sysdev, xfer_list, n); +if (ret) +return ret;/* For now we only use ring 0 */ ring =0 ;
@@ -456,9 +488,6 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,for (i =0 ; i < n; i++) {struct hci_xfer *xfer = xfer_list + i;u32 *ring_data = rh->xfer + rh->xfer_struct_sz * enqueue_ptr; -enum dma_data_direction dir = xfer->rnw ?DMA_FROM_DEVICE : -DMA_TO_DEVICE ; -bool need_bounce;/* store cmd descriptor */ *ring_data++ = xfer->cmd_desc[0 ];
@@ -477,18 +506,6 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,/* 2nd and 3rd words of Data Buffer Descriptor Structure */ if (xfer->data) { - need_bounce =device_iommu_mapped (rings->sysdev) && - xfer->rnw && - xfer->data_len !=ALIGN (xfer->data_len,4 ); - xfer->dma =i3c_master_dma_map_single (rings->sysdev, - xfer->data, - xfer->data_len, - need_bounce, - dir); -if (!xfer->dma) { -hci_dma_unmap_xfer (hci, xfer_list, i); -return -ENOMEM ; - } *ring_data++ =lower_32_bits (xfer->dma->addr); *ring_data++ =upper_32_bits (xfer->dma->addr); }else {
@@ -511,7 +528,7 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci, op2_val =rh_reg_read (RING_OPERATION2 );if (enqueue_ptr ==FIELD_GET (RING_OP2_CR_DEQ_PTR , op2_val)) {/* the ring is full */ -hci_dma_unmap_xfer (hci, xfer_list, i +1 ); +hci_dma_unmap_xfer (hci, xfer_list, n);return -EBUSY ; } }