bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
Subsystems (2)
PATCH 1/1 bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
Add SDX35 based modem Telit FE912C04, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 011a
Subsystem: Device 1c5d:2045
Signed-off-by Daniele Palmas <[email protected]>
--- drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/bus/mhi/host/pci_generic.c +13 -0
@@ -904,6 +904,16 @@ static const struct mhi_pci_dev_info mhi_telit_fe990b40_info = { .edl_trigger = true, }; +static const struct mhi_pci_dev_info mhi_telit_fe912c04_info = { + .name ="telit-fe912c04" , + .config = &modem_telit_fn920c04_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .sideband_wake = false, + .mru_default =32768 , + .edl_trigger = true, +}; +static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = { .name ="netprisma-lcur57" , .edl ="qcom/prog_firehose_sdx24.mbn" ,
@@ -931,6 +941,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* Telit FN920C04 (sdx35) */ {PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x011a, 0x1c5d, 0x2020), .driver_data = (kernel_ulong_t) &mhi_telit_fn920c04_info }, +/* Telit FE912C04 (sdx35) */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x011a, 0x1c5d, 0x2045), + .driver_data = (kernel_ulong_t) &mhi_telit_fe912c04_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x011a), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx35_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
Signature · 1 line
2.37.1
Manivannan Sadhasivam
AppliedQuoted 4 lines · Daniele Palmas
Add SDX35 based modem Telit FE912C04, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 011a
Subsystem: Device 1c5d:2045
Applied, thanks!
[1/1] bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
commit: ac12b852b4ead4a586299c8f68cdcbcaf1bf6cbc
Best regards,
Signature · 1 line
Manivannan Sadhasivam <[email protected]>