Skip to contentSkip to conversation

iio: imu: st_lsm6dsx: Add ACPI ID for SHIFT13mi gyroscope

PATCH Applied Milan Misic 3 participants 11 messages Mar 24 – Mar 26

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: imu: st_lsm6dsx: Add ACPI ID for SHIFT13mi gyroscope

The SHIFT13mi or SHIFTbook tablet device by the German manufacturer SHIFT contains an STM LSM6DSO IMU declared in the DSDT with the hardware ID SMOCF00. Add this ID to the ACPI match table so that the driver binds correctly to this device.

WHO_AM_I register returns 0x6c, confirming LSM6DSO.

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 1 +
 1 file changed, 1 insertion(+)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +1 -0
index 7c9332180..b2a7c2eaf 100644
@@ -144,6 +144,7 @@ MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
 
 static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
 	{ "SMO8B30", ST_LSM6DS3TRC_ID, },
+	{ "SMOCF00", ST_LSM6DSO_ID, },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
Signature · 1 line
2.53.0
#1 lore raw
Quoted 6 lines · Milan Misic

The SHIFT13mi or SHIFTbook tablet device by the German manufacturer SHIFT contains an STM LSM6DSO IMU declared in the DSDT with the hardware ID SMOCF00. Add this ID to the ACPI match table so that the driver binds correctly to this device.

WHO_AM_I register returns 0x6c, confirming LSM6DSO.

Please, for the record also reply with the DSDT excerpt of the device in question, so we will see how it's defined in ACPI.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#2 lore raw
Quoted 2 lines · Andy Shevchenko

Please, for the record also reply with the DSDT excerpt of the device in question, so we will see how it's defined in ACPI.

Hi Andy,
Here's the device's DSDT excerpt:

Device (GYRO)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMOCF00") // _HID: Hardware ID Name (_CID, "SMOCF00") // _CID: Compatible ID Name (_DDN, "Gyroscope") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource
Settings

            {
                Name (RBUF, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x006B, ControllerInitiated, 
0x00061A80,
                        AddressingMode7Bit, "\\_SB.PC00.I2C0",
                        0x00, ResourceConsumer, , Exclusive,
                        RawDataBuffer (0x04)  // Vendor Data
                        {
                            0x53, 0x4F, 0x41, 0x30
                        })
                    I2cSerialBusV2 (0x006B, ControllerInitiated, 
0x00061A80,
                        AddressingMode7Bit, "\\_SB.PC00.I2C0",
                        0x00, ResourceConsumer, , Exclusive,
                        RawDataBuffer (0x04)  // Vendor Data
                        {
                            0x53, 0x4F, 0x47, 0x30
                        })
                })
                Return (RBUF) /* \_SB_.PC00.I2C0.GYRO._CRS.RBUF */
            }

            Method (SOA0, 0, NotSerialized)
            {
                Name (RBUF, Package (0x03)
                {
                    "1 0 0",
                    "0 -1 0",
                    "0 0 1"
                })
                Return (RBUF) /* \_SB_.PC00.I2C0.GYRO.SOA0.RBUF */
            }

            Method (SOG0, 0, NotSerialized)
            {
                Name (RBUF, Package (0x03)
                {
                    "0 1 0",
                    "-1 0 0",
                    "0 0 -1"
                })
                Return (RBUF) /* \_SB_.PC00.I2C0.GYRO.SOG0.RBUF */
            }

            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                Return (0x0F)
            }
        }

Best Regards,
Milan Misic

#3 lore raw
Quoted 6 lines · Milan Mišić
Quoted 2 lines · Andy Shevchenko

Please, for the record also reply with the DSDT excerpt of the device in question, so we will see how it's defined in ACPI.

Hi Andy,
Here's the device's DSDT excerpt:

Thanks.

Interestingly it has accelerometer and gyroscope described there. Is the other part already supported?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#4 lore raw
Quoted 2 lines · Andy Shevchenko

Interestingly it has accelerometer and gyroscope described there. Is the other part already supported?

Hi Andy,
The accelerometer is supported. Checking iio devices:

$ cat /sys/bus/iio/devices/iio:device*/name 

i2c-CPLM3218:00
lsm6dso_gyro
lsm6dso_accel

Both the gyroscope and accelerometer are shown and recognised.

Best regards,
Milan Misic

#5 lore raw
Quoted 7 lines · Milan Mišić
Quoted 2 lines · Andy Shevchenko

Interestingly it has accelerometer and gyroscope described there. Is the other part already supported?

Hi Andy,
The accelerometer is supported. Checking iio devices:

Quoted 7 lines
$ cat /sys/bus/iio/devices/iio:device*/name

i2c-CPLM3218:00
lsm6dso_gyro
lsm6dso_accel

Both the gyroscope and accelerometer are shown and recognised.

Hmm... But it has different HID? Can you also cut'n'paste that device description from DSDT?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#6 lore raw
Quoted 2 lines · Andy Shevchenko

Hmm... But it has different HID? Can you also cut'n'paste that device description from DSDT?

Hi Andy,
the LSM6DSO is a combined unit that only has one hardware ID. The DSDT only has the GYRO node, there is no separate node for the accelerometer. The only other node besides GYRO in that DSDT section is for the ambient light sensor.

Best regards,
Milan Misic

#7 lore raw
Quoted 8 lines · Milan Mišić
Quoted 2 lines · Andy Shevchenko

Hmm... But it has different HID? Can you also cut'n'paste that device description from DSDT?

the LSM6DSO is a combined unit that only has one hardware ID. The DSDT only has the GYRO node, there is no separate node for the accelerometer. The only other node besides GYRO in that DSDT section is for the ambient light sensor.

Ah, right, the third one there is probably touchscreen or touchpad wit the HID CPLM3218.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#8 lore raw
Quoted 7 lines · Andy Shevchenko
Quoted 4 lines

the LSM6DSO is a combined unit that only has one hardware ID. The DSDT only has the GYRO node, there is no separate node for the accelerometer. The only other node besides GYRO in that DSDT section is for the ambient light sensor.

Ah, right, the third one there is probably touchscreen or touchpad wit the HID CPLM3218.

Hi Andy,
The CPLM3218 corresponds to the device's Capella Micro CM3218x ambient light sensor. It is fully functional.

Best regards,
Milan Misic

Reviewed-by on v1 1/1
#9 lore raw
In reply to Milan Misic
Quoted 6 lines · Milan Misic

The SHIFT13mi or SHIFTbook tablet device by the German manufacturer SHIFT contains an STM LSM6DSO IMU declared in the DSDT with the hardware ID SMOCF00. Add this ID to the ACPI match table so that the driver binds correctly to this device.

WHO_AM_I register returns 0x6c, confirming LSM6DSO.

Based on the provided information,

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer Applied
#10 lore raw
Quoted 11 lines · On Thu, 26 Mar 2026 12:02:14 +0200 Andy Shevchenko…
Quoted 6 lines · Milan Misic

The SHIFT13mi or SHIFTbook tablet device by the German manufacturer SHIFT contains an STM LSM6DSO IMU declared in the DSDT with the hardware ID SMOCF00. Add this ID to the ACPI match table so that the driver binds correctly to this device.

WHO_AM_I register returns 0x6c, confirming LSM6DSO.

Based on the provided information,

Applied.