hwmon:tmp102: add support for update interval
Subsystems (2)
PATCH 1/1 hwmon:tmp102: add support for update interval
Since the sensor supports different sampling intervals via bits CR0 and CR1 from the CONFIG register, add support in order for the conversion rate to be changed from user space. Default is 4 conv/sec.
--- Documentation/hwmon/tmp102.rst | 19 +++- drivers/hwmon/tmp102.c | 165 ++++++++++++++++++++++++--------- 2 files changed, 139 insertions(+), 45 deletions(-)
Documentation/hwmon/tmp102.rst +16 -3
@@ -41,12 +41,25 @@ degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The operating temperature has a minimum of -55 C and a maximum of +150 C. The TMP102 has a programmable update rate that can select between 8, 4, 1, and -0.5 Hz. (Currently the driver only supports the default of 4 Hz). +0.5 Hz. The TMP110 and TMP113 are software compatible with TMP102, but have different accuracy (maximum error) specifications. The TMP110 has an accuracy (maximum error) of 1.0 degree, TMP113 has an accuracy (maximum error) of 0.3 degree, while TMP102 has an accuracy (maximum error) of 2.0 degree. -The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface.rst under Temperatures). +sysfs-Interface +--------------- + +The following list includes the sysfs attributes that the driver provides, their +permissions and a short description: + +=============================== ======= ======================================== +Name Perm Description +=============================== ======= ======================================== +temp1_input: RO Temperature input +temp1_label: RO Descriptive name for the sensor +temp1_max: RW Maximum temperature +temp1_max_hyst: RW Maximum hysteresis temperature +update_interval RW Update conversions interval in milliseconds +=============================== ======= ========================================
drivers/hwmon/tmp102.c +123 -42
225 lines not on this page · raw message
Signature · 1 line
2.34.1
Guenter Roeck
maintainerHi,
Quoted 6 lines · Flaviu Nistor
Since the sensor supports different sampling intervals via bits CR0 and CR1 from the CONFIG register, add support in order for the conversion rate to be changed from user space. Default is 4 conv/sec.
Signed-off-by Flaviu Nistor <[email protected]>
The subject line should start with "hwmon: (tmp102) " to match the common subject line format used in hwmon drivers.
Other than that, please check
https://sashiko.dev/#/patchset/20260331175418.16145-1-flaviu.nistor%40gmail.com
and fix the identified issues.
Additional comments inline.
Thanks,
Guenter
Quoted 28 lines
--- Documentation/hwmon/tmp102.rst | 19 +++- drivers/hwmon/tmp102.c | 165 ++++++++++++++++++++++++--------- 2 files changed, 139 insertions(+), 45 deletions(-)Documentation/hwmon/tmp102.rst +6
-3@@ -41,12 +41,25 @@ degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The operating temperature has a minimum of -55 C and a maximum of +150 C. The TMP102 has a programmable update rate that can select between 8, 4, 1, and -0.5 Hz. (Currently the driver only supports the default of 4 Hz). +0.5 Hz. The TMP110 and TMP113 are software compatible with TMP102, but have different accuracy (maximum error) specifications. The TMP110 has an accuracy (maximum error) of 1.0 degree, TMP113 has an accuracy (maximum error) of 0.3 degree, while TMP102 has an accuracy (maximum error) of 2.0 degree. -The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface.rst under Temperatures). +sysfs-Interface +--------------- + +The following list includes the sysfs attributes that the driver provides, their +permissions and a short description:
Documentation/hwmon/tmp102.rst degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The · line 65
Quoted 10 lines
Documentation/hwmon/tmp102.rst +10
-0+ +=============================== ======= ======================================== +Name Perm Description +=============================== ======= ======================================== +temp1_input: RO Temperature input +temp1_label: RO Descriptive name for the sensor +temp1_max: RW Maximum temperature +temp1_max_hyst: RW Maximum hysteresis temperature +update_interval RW Update conversions interval in milliseconds +=============================== ======= ========================================
This will likely trigger a documentation error since the "===" line is expected to match the longest text in the table.
Quoted 15 lines
drivers/hwmon/tmp102.c +6
-0@@ -50,11 +50,25 @@#define CONVERSION_TIME_MS 35/* in milli-seconds */ +struct tmp102_params { +u16 default_sample_time; +u8 num_sample_times; +const unsigned int *sample_times; +}; +struct tmp102 {
drivers/hwmon/tmp102.c line 69
Quoted 10 lines
drivers/hwmon/tmp102.c +6
-0const char *label;struct regmap *regmap;u16 config_orig;unsigned long ready_time; +u16 sample_time; +const struct tmp102_params *params; +}; + +static const struct tmp102_params device_params = { + .default_sample_time =125 ,
Why change the default ?
Quoted 14 lines
drivers/hwmon/tmp102.c +3
-1+ .num_sample_times = 4, + .sample_times = (unsigned int []){ 125, 250, 1000, 4000 }, };/* convert left adjusted 13-bit TMP102 register value to milliCelsius */ @@ -80,58 +94,113 @@ static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, }static int tmp102_read (struct device *dev,enum hwmon_sensor_types type, -u32 attr,int channel,long *temp) +u32 attr,int channel,long *val) {struct tmp102 *tmp102 =dev_get_drvdata (dev);unsigned int regval;
drivers/hwmon/tmp102.c static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, · line 104
Quoted 10 lines
drivers/hwmon/tmp102.c +2
-6int err, reg; -switch (attr) { -case hwmon_temp_input: -/* Is it too early to return a conversion ? */ -if (time_before (jiffies, tmp102->ready_time)) { -dev_dbg (dev,"%s: Conversion not ready yet..\n" , __func__); -return -EAGAIN ; +switch (type) { +case hwmon_chip:
Please split into separate functions for handling chip and temperature data.
drivers/hwmon/tmp102.c static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, · line 110
Quoted 6 lines
drivers/hwmon/tmp102.c +6
-0+switch (attr) { +case hwmon_chip_update_interval: + *val = tmp102->sample_time; +break ; +default : +return -EINVAL ;
-EOPNOTSUPP
Quoted 25 lines
drivers/hwmon/tmp102.c +17
-6} - reg =TMP102_TEMP_REG ;break ; -case hwmon_temp_max_hyst: - reg =TMP102_TLOW_REG ; -break ; -case hwmon_temp_max: - reg =TMP102_THIGH_REG ; +case hwmon_temp: +switch (attr) { +case hwmon_temp_input: +/* Is it too early to return a conversion ? */ +if (time_before (jiffies, tmp102->ready_time)) { +dev_dbg (dev,"%s: Conversion not ready yet..\n" , __func__); +return -EAGAIN ; + } + reg =TMP102_TEMP_REG ; +break ; +case hwmon_temp_max_hyst: + reg =TMP102_TLOW_REG ; +break ; +case hwmon_temp_max: + reg =TMP102_THIGH_REG ; +break ; +default :
drivers/hwmon/tmp102.c static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, · line 138
Quoted 10 lines
drivers/hwmon/tmp102.c +7
-1+return -EOPNOTSUPP ; + } + err =regmap_read (tmp102->regmap, reg, ®val); +if (err <0 ) +return err; + *val =tmp102_reg_to_mC (regval);break ;default : -return -EOPNOTSUPP ; +return -EINVAL ;
Do not change this.
Quoted 26 lines
drivers/hwmon/tmp102.c +19
-2} +return 0 ; +} + +static int tmp102_update_interval (struct device *dev,long val) +{ +struct tmp102 *tmp102 =dev_get_drvdata (dev); +unsigned int reg; +u8 index; +s32 err; + + index =find_closest (val, tmp102->params->sample_times, + (int )tmp102->params->num_sample_times); - err =regmap_read (tmp102->regmap, reg, ®val); + err =regmap_read (tmp102->regmap,TMP102_CONF_REG , ®); +if (err <0 ) +return err; + reg &= ~0x00c0 ; + reg |= (3 - index) <<6 ; + err =regmap_write (tmp102->regmap,TMP102_CONF_REG , reg);if (err <0 )return err; - *temp =tmp102_reg_to_mC (regval); + tmp102->sample_time = tmp102->params->sample_times[index];
drivers/hwmon/tmp102.c static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, · line 172
Quoted 10 lines
drivers/hwmon/tmp102.c +7
-0return 0 ; } +static int tmp102_write_chip (struct device *dev,u32 attr,long val) +{ +switch (attr) { +case hwmon_chip_update_interval: +return tmp102_update_interval (dev, val); +default : +return -EINVAL ;
-EOPNOTSUPP. This is not an "Invalid Argument" provided by the user.
Quoted 28 lines
drivers/hwmon/tmp102.c +15
-8+ } +return 0 ; +} +static int tmp102_write (struct device *dev,enum hwmon_sensor_types type, -u32 attr,int channel,long temp) +u32 attr,int channel,long val) {struct tmp102 *tmp102 =dev_get_drvdata (dev);int reg; -switch (attr) { -case hwmon_temp_max_hyst: - reg =TMP102_TLOW_REG ; -break ; -case hwmon_temp_max: - reg =TMP102_THIGH_REG ; -break ; +switch (type) { +case hwmon_chip: +return tmp102_write_chip (dev, attr, val); +case hwmon_temp: +switch (attr) { +case hwmon_temp_max_hyst: + reg =TMP102_TLOW_REG ; +break ; +case hwmon_temp_max: + reg =TMP102_THIGH_REG ;
drivers/hwmon/tmp102.c static int tmp102_read_string(struct device *dev, enum hwmon_sensor_types type, · line 201
Quoted 10 lines
drivers/hwmon/tmp102.c +8
-1+break ; +default : +return -EOPNOTSUPP ; + } + + val =clamp_val (val,-256000 ,255000 ); +return regmap_write (tmp102->regmap, reg,tmp102_mC_to_reg (val));default : -return -EOPNOTSUPP ; +return -EINVAL ;
Sigh.
Quoted 32 lines
drivers/hwmon/tmp102.c +11
-12} - - temp =clamp_val (temp,-256000 ,255000 ); -return regmap_write (tmp102->regmap, reg,tmp102_mC_to_reg (temp)); +return 0 ; } static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type,@@ -139,27 +208,35 @@ static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type, {const struct tmp102 *tmp102 = data; -if (type != hwmon_temp) -return 0 ; - -switch (attr) { -case hwmon_temp_input: -return 0444 ; -case hwmon_temp_label: -if (tmp102->label) +switch (type) { +case hwmon_chip: +switch (attr) { +case hwmon_chip_update_interval: +return 0644 ; + } +break ; +case hwmon_temp: +switch (attr) { +case hwmon_temp_input:return 0444 ; -return 0 ;
drivers/hwmon/tmp102.c static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type, · line 228
Quoted 10 lines
drivers/hwmon/tmp102.c +7
-3-case hwmon_temp_max_hyst: -case hwmon_temp_max: -return 0644 ; +case hwmon_temp_label: +if (tmp102->label) +return 0444 ; +return 0 ; +case hwmon_temp_max_hyst: +case hwmon_temp_max: +return 0644 ;
Please add "default:" to all those case statements.
Quoted 17 lines
drivers/hwmon/tmp102.c +5
-2+ } +break ;default : -return 0 ; +break ; } +return 0 ; }static const struct hwmon_channel_info *const tmp102_info[] = {HWMON_CHANNEL_INFO (chip, -HWMON_C_REGISTER_TZ ), +HWMON_C_REGISTER_TZ |HWMON_C_UPDATE_INTERVAL ),HWMON_CHANNEL_INFO (temp,HWMON_T_INPUT |HWMON_T_LABEL |HWMON_T_MAX |HWMON_T_MAX_HYST ),NULL
drivers/hwmon/tmp102.c static int tmp102_probe(struct i2c_client *client) · line 317
Quoted 4 lines
drivers/hwmon/tmp102.c +1
-0@@ -237,6 +314,10 @@ static int tmp102_probe(struct i2c_client *client)if (IS_ERR (tmp102->regmap))return PTR_ERR (tmp102->regmap); + tmp102->params = &device_params;
Why have "params" in the first place ? I don't see the point unless the driver supports more than one chip.
Quoted 6 lines
drivers/hwmon/tmp102.c +3
-0+ + tmp102->sample_time = tmp102->params->default_sample_time; + err =regmap_read (tmp102->regmap,TMP102_CONF_REG , ®val);if (err <0 ) {dev_err (dev,"error reading config register\n" );