Fix LPDDR3 H616 TPR6 parsing
Subsystems (3)
cover Fix LPDDR3 H616 TPR6 parsing
Vendor TPR6 parameter is currently incorrectly parsed in H616 dram code. Fix that and adjust Kconfig default value accordingly.
Philippe Simons (2):
sunxi: H616: dram: fix LPDDR3 TPR6 parsing
sunxi: fix DRAM_SUNXI_TPR6 default value
arch/arm/mach-sunxi/Kconfig | 2 +- arch/arm/mach-sunxi/dram_sun50i_h616.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.53.0
PATCH 1/2 sunxi: H616: dram: fix LPDDR3 TPR6 parsing
From: Jernej Skrabec <[email protected]>
When a user copies the vendor value of tpr6 into the mainline U-Boot, the code parses the tpr6 parameter incorrectly and writes the wrong value. Fixes Vref parsing from TPR6. Proper order from LSB to MSB is DDR3, DDR4, LPDDR3 and LPDDR4
Fix that.
--- arch/arm/mach-sunxi/dram_sun50i_h616.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-sunxi/dram_sun50i_h616.c +1 -1
@@ -975,7 +975,7 @@ static bool mctl_phy_init(const struct dram_para *para, val = para->tpr6 &0xff ;break ;case SUNXI_DRAM_TYPE_LPDDR3 : - val = para->tpr6 >>8 &0xff ; + val = para->tpr6 >>16 &0xff ;break ;case SUNXI_DRAM_TYPE_LPDDR4 : val = para->tpr6 >>24 &0xff ;
Signature · 1 line
2.53.0
Re: [PATCH 1/2] sunxi: H616: dram: fix LPDDR3 TPR6 parsing
On Sun, 5 Apr 2026 21:59:26 +0200 Philippe Simons <[email protected]> wrote:
Hi Philippe,
thanks for taking care of sending this patch!
Quoted 4 lines
From: Jernej Skrabec <[email protected]>
When a user copies the vendor value of tpr6 into the mainline U-Boot, the code parses the tpr6 parameter incorrectly and writes the wrong value.
That sentence is hard to understand unless you know what this value is about already. What about:
===============
Allwinner's BSP DRAM code uses parameter TPR6, presumably containing some "Vref" parameter, to encode the values for *all* four supported DRAM types. The code selects one byte based on the DRAM type used at runtime. To allow copying DRAM parameters from vendor firmware, we used this value and its encoding, but wrongly: the proper order of bytes is DDR3, DDR4, LPDDR3, LPDDR4, from LSB to MSB, cf. the A523 and A133 DRAM code.
Correct the masking for LPDDR3 to fix DRAM operation on some boards using this DRAM type.
==============
Plus we need the second patch merged into this one, otherwise this would introduce (an admittedly theoretical) regression.
But the actual changes in both patches looks good to me.
Cheers,
Andre
Quoted 25 lines
Fixes Vref parsing from TPR6. Proper order from LSB to MSB is DDR3, DDR4, LPDDR3 and LPDDR4
Fix that.
Signed-off-by Jernej Skrabec <[email protected]>[adjusted commit message]Signed-off-by Philippe Simons <[email protected]>--- arch/arm/mach-sunxi/dram_sun50i_h616.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-sunxi/dram_sun50i_h616.c +1
-1@@ -975,7 +975,7 @@ static bool mctl_phy_init(const struct dram_para *para, val = para->tpr6 &0xff ;break ;case SUNXI_DRAM_TYPE_LPDDR3 : - val = para->tpr6 >>8 &0xff ; + val = para->tpr6 >>16 &0xff ;break ;case SUNXI_DRAM_TYPE_LPDDR4 : val = para->tpr6 >>24 &0xff ;
PATCH 2/2 sunxi: fix DRAM_SUNXI_TPR6 default value
In reply to Philippe SimonsWith LPDDR3 TPR6 parsing fix, adapt default DRAM_SUNXI_TPR6 value. Also change LPDDR4 default value to 0x38 used by A523 boards.
--- arch/arm/mach-sunxi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +1 -1
@@ -144,7 +144,7 @@ config DRAM_SUNXI_TPR3 config DRAM_SUNXI_TPR6 hex "DRAM TPR6 parameter" - default 0x3300c080 + default 0x38c00080 help TPR6 value from vendor DRAM settings.
Signature · 1 line
2.53.0