ALSA: ctxfi: Limit PTP to a single page
PATCH 1/1 ALSA: ctxfi: Limit PTP to a single page
Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multiple VMEM_PTPAL registers, but using them separately would require refactoring the entire virtual memory allocation logic.
ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit, ct_vm_map() tries to access beyond the allocated space and causes a page fault:
BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e
Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count remain unchanged.
--- sound/pci/ctxfi/ctvmem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/ctxfi/ctvmem.h +1 -1
@@ -15,7 +15,7 @@#ifndef CTVMEM_H #define CTVMEM_H -#define CT_PTP_NUM 4/* num of device page table pages */ +#define CT_PTP_NUM 1/* num of device page table pages */ #include <linux/mutex.h> #include <linux/list.h>
Signature · 1 line
2.53.0
Takashi Iwai
AppliedQuoted 26 lines · Harin Lee
Commit
391e69143d0aincreasedCT_PTP_NUMfrom 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multipleVMEM_PTPALregisters, but using them separately would require refactoring the entire virtual memory allocation logic.
ct_vm_map()always uses PTEs in vm->ptp[0].area regardless ofCT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit,ct_vm_map()tries to access beyond the allocated space and causes a page fault:BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e
Quoted 6 lines
Revert
CT_PTP_NUMto 1. The 256SRC_RESOURCE_NUMandplayback_countremain unchanged.Fixes 391e69143d0a ("ALSA: ctxfi: Bump playback substreams to 256")Signed-off-by Harin Lee <[email protected]>
Applied to for-next branch now, as it's no regression in 7.0, per se.
But, I wonder whether fixing in ctvmem.c would be relatively easy. Isn't it only about ct_vm_map() and ct_get_ptp_phys()?
thanks,
Takashi
Quoted 37 lines · Takashi Iwai
Quoted 26 lines · Harin Lee
Commit
391e69143d0aincreasedCT_PTP_NUMfrom 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multipleVMEM_PTPALregisters, but using them separately would require refactoring the entire virtual memory allocation logic.
ct_vm_map()always uses PTEs in vm->ptp[0].area regardless ofCT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit,ct_vm_map()tries to access beyond the allocated space and causes a page fault:BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7eQuoted 6 lines
Revert
CT_PTP_NUMto 1. The 256SRC_RESOURCE_NUMandplayback_countremain unchanged.Fixes 391e69143d0a ("ALSA: ctxfi: Bump playback substreams to 256")Signed-off-by Harin Lee <[email protected]>Applied to for-next branch now, as it's no regression in 7.0, per se.
Quoted 7 lines
But, I wonder whether fixing in
ctvmem.cwould be relatively easy. Isn't it only aboutct_vm_map()andct_get_ptp_phys()?thanks,
Takashi
Hi Takashi.
info.vm_pgt_phys is set in atc_create_hw_devs().
...
/* Initialize card hardware. */
info.rsr = atc->rsr;
info.msr = atc->msr;
info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
err = hw->card_init(hw, &info);
if (err < 0)
return err;
...The atc_get_ptp_phys() function actually calls ct_get_ptp_phys(). However, the index is 0, which only retrieves the address of the first PTP.
The hw_trn_init() for CT20K1 and CT20K2 writes the value of info.vm_pgt_phys to the hardware registers.
... ptp_phys_low = (u32)info->vm_pgt_phys; ptp_phys_high = upper_32_bits(info->vm_pgt_phys); ...
CT20K1 implementation writes to the PTPALX and PTPAHX registers. CT20K2 implementation writes same single PTP address to all 64 VMEM_PTPAL and VMEM_PTPAH registers.
We don't know if CT20K2 hardware actually supports independent PTPs, and refactoring would be risky. So I think the current approach is the safest for now.
This is what I've found so far.
Thanks.
Harin Lee
Quoted 77 lines · Harin Lee
Quoted 37 lines · Takashi Iwai
Quoted 26 lines · Harin Lee
Commit
391e69143d0aincreasedCT_PTP_NUMfrom 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multipleVMEM_PTPALregisters, but using them separately would require refactoring the entire virtual memory allocation logic.
ct_vm_map()always uses PTEs in vm->ptp[0].area regardless ofCT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit,ct_vm_map()tries to access beyond the allocated space and causes a page fault:BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7eQuoted 6 lines
Revert
CT_PTP_NUMto 1. The 256SRC_RESOURCE_NUMandplayback_countremain unchanged.Fixes 391e69143d0a ("ALSA: ctxfi: Bump playback substreams to 256")Signed-off-by Harin Lee <[email protected]>Applied to for-next branch now, as it's no regression in 7.0, per se.
Quoted 7 lines
But, I wonder whether fixing in
ctvmem.cwould be relatively easy. Isn't it only aboutct_vm_map()andct_get_ptp_phys()?thanks,
Takashi
Hi Takashi.
info.vm_pgt_phys is set in
atc_create_hw_devs().... /* Initialize card hardware. */ info.rsr = atc->rsr; info.msr = atc->msr; info.vm_pgt_phys = atc_get_ptp_phys(atc, 0); err = hw->card_init(hw, &info); if (err < 0) return err; ...The
atc_get_ptp_phys()function actually callsct_get_ptp_phys(). However, the index is 0, which only retrieves the address of the first PTP.The
hw_trn_init()for CT20K1 and CT20K2 writes the value of info.vm_pgt_phys to the hardware registers.... ptp_phys_low = (u32)info->vm_pgt_phys; ptp_phys_high = upper_32_bits(info->vm_pgt_phys); ...CT20K1 implementation writes to the PTPALX and PTPAHX registers. CT20K2 implementation writes same single PTP address to all 64
VMEM_PTPALandVMEM_PTPAHregisters.
Quoted 5 lines
We don't know if CT20K2 hardware actually supports independent PTPs, and refactoring would be risky. So I think the current approach is the safest for now.
This is what I've found so far.
Makes sense. As already mentioned, your patch was applied. If any further development to extend PTPs again, feel free to resubmit.
thanks,
Takashi