spi: fix resource leaks on device setup failure

index 272b45d6b5aa..c14f29457c29 100644
@@ -43,6 +43,8 @@ EXPORT_TRACEPOINT_SYMBOL(spi_transfer_stop);
 
 #include "internals.h"
 
+static int __spi_setup(struct spi_device *spi, bool initial_setup);
+
 static DEFINE_IDR(spi_controller_idr);
 
 static void spidev_release(struct device *dev)

@@ -726,7 +728,7 @@ static int __spi_add_device(struct spi_device *spi)
 	 * normally rely on the device being setup.  Devices
 	 * using SPI_CS_HIGH can't coexist well otherwise...
 	 */
-	status = spi_setup(spi);
+	status = __spi_setup(spi, true);
 	if (status < 0) {
 		dev_err(dev, "can't setup %s, status %d\n",
 				dev_name(&spi->dev), status);

@@ -3992,27 +3994,7 @@ static int spi_set_cs_timing(struct spi_device *spi)
 	return status;
 }
 
-/**
- * spi_setup - setup SPI mode and clock rate
- * @spi: the device whose settings are being modified
- * Context: can sleep, and no requests are queued to the device
- *
- * SPI protocol drivers may need to update the transfer mode if the
- * device doesn't work with its default.  They may likewise need
- * to update clock rates or word sizes from initial values.  This function
- * changes those settings, and must be called from a context that can sleep.
- * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
- * effect the next time the device is selected and data is transferred to
- * or from it.  When this function returns, the SPI device is deselected.
- *
- * Note that this call will fail if the protocol driver specifies an option
- * that the underlying controller or its driver does not support.  For
- * example, not all hardware supports wire transfers using nine bit words,
- * LSB-first wire encoding, or active-high chipselects.
- *
- * Return: zero on success, else a negative error code.
- */
-int spi_setup(struct spi_device *spi)
+static int __spi_setup(struct spi_device *spi, bool initial_setup)
 {
 	unsigned	bad_bits, ugly_bits;
 	int		status;

@@ -4097,7 +4079,7 @@ int spi_setup(struct spi_device *spi)
 	status = spi_set_cs_timing(spi);
 	if (status) {
 		mutex_unlock(&spi->controller->io_mutex);
-		return status;
+		goto err_cleanup;
 	}
 
 	if (spi->controller->auto_runtime_pm && spi->controller->set_cs) {

@@ -4106,7 +4088,7 @@ int spi_setup(struct spi_device *spi)
 			mutex_unlock(&spi->controller->io_mutex);
 			dev_err(&spi->controller->dev, "Failed to power device: %d\n",
 				status);
-			return status;
+			goto err_cleanup;
 		}
 
 		/*

@@ -4142,6 +4124,37 @@ int spi_setup(struct spi_device *spi)
 			status);
 
 	return status;
+
+err_cleanup:
+	if (initial_setup)
+		spi_cleanup(spi);
+
+	return status;
+}
+
+/**
+ * spi_setup - setup SPI mode and clock rate
+ * @spi: the device whose settings are being modified
+ * Context: can sleep, and no requests are queued to the device
+ *
+ * SPI protocol drivers may need to update the transfer mode if the
+ * device doesn't work with its default.  They may likewise need
+ * to update clock rates or word sizes from initial values.  This function
+ * changes those settings, and must be called from a context that can sleep.
+ * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
+ * effect the next time the device is selected and data is transferred to
+ * or from it.  When this function returns, the SPI device is deselected.
+ *
+ * Note that this call will fail if the protocol driver specifies an option
+ * that the underlying controller or its driver does not support.  For
+ * example, not all hardware supports wire transfers using nine bit words,
+ * LSB-first wire encoding, or active-high chipselects.
+ *
+ * Return: zero on success, else a negative error code.
+ */
+int spi_setup(struct spi_device *spi)
+{
+	return __spi_setup(spi, false);
 }
 EXPORT_SYMBOL_GPL(spi_setup);
 

index 0dc671c07d3a..0de636484f3d 100644
@@ -700,7 +700,7 @@ struct spi_controller {
 	int			(*transfer)(struct spi_device *spi,
 						struct spi_message *mesg);
 
-	/* Called on release() to free memory provided by spi_controller */
+	/* Called on deregistration to free memory provided by spi_controller */
 	void			(*cleanup)(struct spi_device *spi);
 
 	/*