monitor: turn QMP and HMP into QOM objects
cover monitor: turn QMP and HMP into QOM objects
Conceptually -object and object_add/object_del should be sufficient for essentially all QEMU configuration....if only we ported all our internal custom backends/devices/etc to QOM. That is of course a big job which is why it hasn't happened.
This series started with the premise that the monitor is one of the easier areas to convert since we have no more than three classes, a common base, and QMP and HMP subclasses. So why not give it a go and thus unlock the ability to dynamically create/delete monitors in QMP/HMP.
This series does the conversion in as many small steps as I could achieve. At the end it is possible to create HMP and QMP monitors with -object and object_add.
In theory object_del is possible but is unsafe since there's no synchronization wrt "in use" monitors. Christian Brauner sent a proposal for monitor_add/monitor_del commands that address the safety/synchronization issues, but I've not yet integrated the relevent bits of that series with this proposal:
https://lists.nongnu.org/archive/html/qemu-devel/2026-04/msg01349.html
My overall feeling is that we're better off turning monitors into QOM classes, rather than inventing more type specific QMP commands.
What's missing:
- Integration of code for safe deletion of monitors
- The existing -mon/-qmp/-monitor args should be turned into syntax sugar around -object & -chardev
- The new approach must be documented
- Functional tests are needed for the hot add/remove of monitors and new -object syntax. (The pre-existing test suites cover the static config with the traditional args).
Daniel P. Berrangé (17):
monitor: replace 'common' with 'parent' in MonitorHMP
monitor: replace 'common' with 'parent' in MonitorQMP
monitor: rename monitor_init* to monitor_new*
monitor: minimal conversion of monitors to QOM
monitor: remove 'skip_flush' field
monitor: move monitor_data_(init|destroy) into QOM init/finalize
monitor: use class methods for monitor_vprintf
monitor: use class methods for monitor_qapi_event_emit
monitor: use class methods for monitor_accept_input
monitor: use dynamic cast in monitor_qmp_requests_pop_any_with_lock
util: use dynamic cast in error vreport
monitor: drop unused monitor_cur_is_qmp
monitor: use dynamic cast in QMP commands
monitor: use dynamic cast in monitor_is_hmp_non_interactive
monitor: drop unused monitor_is_qmp method
monitor: eliminate monitor_is_hmp_non_interactive method
FIXME: monitor: implement "user creatable" interface
chardev/char.c | 10 +- gdbstub/system.c | 10 +- include/monitor/monitor.h | 21 ++- migration/migration-hmp-cmds.c | 5 +- monitor/hmp-cmds.c | 7 +- monitor/hmp.c | 159 ++++++++++++++----- monitor/monitor-internal.h | 44 +++--- monitor/monitor.c | 222 +++++++++++++-------------- monitor/qmp-cmds-control.c | 12 +- monitor/qmp-cmds.c | 14 +- monitor/qmp.c | 138 ++++++++++++----- qapi/qom.json | 43 ++++++ storage-daemon/qemu-storage-daemon.c | 2 +- stubs/monitor-core.c | 5 - stubs/monitor-internal.c | 4 - system/vl.c | 10 +- tests/unit/test-util-sockets.c | 1 - ui/ui-hmp-cmds.c | 2 +- util/error-report.c | 13 +- 19 files changed, 465 insertions(+), 257 deletions(-)
Signature · 1 line
2.53.0
PATCH 1/17 monitor: replace 'common' with 'parent' in MonitorHMP
The field name 'parent' is standard practice for QOM structs so align the HMP monitor.
--- monitor/hmp-cmds.c | 2 +- monitor/hmp.c | 40 +++++++++++++++++++------------------- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 6 +++--- monitor/qmp-cmds.c | 10 +++++----- ui/ui-hmp-cmds.c | 2 +- 6 files changed, 31 insertions(+), 31 deletions(-)
monitor/hmp-cmds.c +1 -1
@@ -236,7 +236,7 @@ void hmp_info_sync_profile(Monitor *mon, const QDict *qdict)void hmp_info_history (Monitor *mon,const QDict *qdict) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);int i;const char *str;
monitor/hmp.c +20 -20
@@ -47,9 +47,9 @@ static void monitor_command_cb(void *opaque, const char *cmdline, {MonitorHMP *mon = opaque; -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent);handle_hmp_command (mon, cmdline); -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }void monitor_read_command (MonitorHMP *mon,int show_prompt)
@@ -72,7 +72,7 @@ int monitor_read_password(MonitorHMP *mon, ReadLineFunc *readline_func,/* prompt is printed on return from the command handler */ return 0 ; }else { -monitor_printf (&mon->common, +monitor_printf (&mon->parent,"terminal does not support password prompting\n" );return -ENOTTY ; }
@@ -689,7 +689,7 @@ static const HMPCommand *monitor_parse_command(MonitorHMP *hmp_mon,const char **cmdp, HMPCommand *table) { - Monitor *mon = &hmp_mon->common; + Monitor *mon = &hmp_mon->parent;const char *p;const HMPCommand *cmd;char cmdname[256 ];
@@ -1182,35 +1182,35 @@ void handle_hmp_command(MonitorHMP *mon, const char *cmdline)if (!cmd->cmd && !cmd->cmd_info_hrt) {/* FIXME: is it useful to try autoload modules here ??? */ -monitor_printf (&mon->common,"Command \"%.*s\" is not available.\n" , +monitor_printf (&mon->parent,"Command \"%.*s\" is not available.\n" , (int )(cmdline - cmd_start), cmd_start);return ; } - qdict =monitor_parse_arguments (&mon->common, &cmdline, cmd); + qdict =monitor_parse_arguments (&mon->parent, &cmdline, cmd);if (!qdict) {while (cmdline > cmd_start &&qemu_isspace (cmdline[-1 ])) { cmdline--; } -monitor_printf (&mon->common,"Try \"help %.*s\" for more information\n" , +monitor_printf (&mon->parent,"Try \"help %.*s\" for more information\n" , (int )(cmdline - cmd_start), cmd_start);return ; }if (!cmd->coroutine) {/* old_mon is non-NULL when called from qmp_human_monitor_command() */ -Monitor *old_mon =monitor_set_cur (qemu_coroutine_self (), &mon->common); -handle_hmp_command_exec (&mon->common, cmd, qdict); +Monitor *old_mon =monitor_set_cur (qemu_coroutine_self (), &mon->parent); +handle_hmp_command_exec (&mon->parent, cmd, qdict);monitor_set_cur (qemu_coroutine_self (), old_mon); }else {HandleHmpCommandCo data = { - .mon = &mon->common, + .mon = &mon->parent, .cmd = cmd, .qdict = qdict, .done = false, };Coroutine *co =qemu_coroutine_create (handle_hmp_command_co, &data); -monitor_set_cur (co, &mon->common); +monitor_set_cur (co, &mon->parent);aio_co_enter (qemu_get_aio_context (), co);AIO_WAIT_WHILE_UNLOCKED (NULL , !data.done); }
@@ -1428,7 +1428,7 @@ cleanup:static void monitor_read (void *opaque,const uint8_t *buf,int size) { -MonitorHMP *mon =container_of (opaque, MonitorHMP, common); +MonitorHMP *mon =container_of (opaque, MonitorHMP, parent);int i;if (mon->rs) {
@@ -1437,7 +1437,7 @@ static void monitor_read(void *opaque, const uint8_t *buf, int size) } }else {if (size ==0 || buf[size -1 ] !=0 ) { -monitor_printf (&mon->common,"corrupted command\n" ); +monitor_printf (&mon->parent,"corrupted command\n" ); }else {handle_hmp_command (mon, (char *)buf); }
@@ -1506,26 +1506,26 @@ static void G_GNUC_PRINTF(2, 3) monitor_readline_printf(void *opaque,MonitorHMP *mon = opaque;va_list ap;va_start (ap, fmt); -monitor_vprintf (&mon->common, fmt, ap); +monitor_vprintf (&mon->parent, fmt, ap);va_end (ap); }static void monitor_readline_flush (void *opaque) {MonitorHMP *mon = opaque; -monitor_flush (&mon->common); +monitor_flush (&mon->parent); }void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) {MonitorHMP *mon =g_new0 (MonitorHMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -monitor_data_init (&mon->common, false, false, false); +monitor_data_init (&mon->parent, false, false, false); mon->use_readline = use_readline;if (mon->use_readline) {
@@ -1536,9 +1536,9 @@ void monitor_init_hmp(Chardev *chr, bool use_readline, Error **errp)monitor_read_command (mon,0 ); } -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, monitor_read, - monitor_event,NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_read, + monitor_event,NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); }/**
monitor/monitor-internal.h +1 -1
@@ -119,7 +119,7 @@ struct Monitor { };struct MonitorHMP { -Monitor common; +Monitor parent;bool use_readline;/* * State used only in the thread "owning" the monitor.
monitor/monitor.c +3 -3
@@ -132,7 +132,7 @@ static inline bool monitor_is_hmp_non_interactive(const Monitor *mon)return false; } -return !monitor_uses_readline (container_of (mon, MonitorHMP, common)); +return !monitor_uses_readline (container_of (mon, MonitorHMP, parent)); } static gboolean monitor_unblocked(void *do_not_use, GIOCondition cond,
@@ -542,7 +542,7 @@ static void monitor_accept_input(void *opaque)qemu_mutex_lock (&mon->mon_lock);if (!monitor_is_qmp (mon) && mon->reset_seen) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);assert (hmp_mon->rs);readline_restart (hmp_mon->rs);qemu_mutex_unlock (&mon->mon_lock);
@@ -627,7 +627,7 @@ void monitor_data_destroy(Monitor *mon)if (monitor_is_qmp (mon)) {monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); }else { -readline_free (container_of (mon, MonitorHMP, common)->rs); +readline_free (container_of (mon, MonitorHMP, parent)->rs); }g_string_free (mon->outbuf, true);qemu_mutex_destroy (&mon->mon_lock);
monitor/qmp-cmds.c +5 -5
@@ -168,10 +168,10 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP hmp = {}; -monitor_data_init (&hmp.common, false, true, false); +monitor_data_init (&hmp.parent, false, true, false);if (has_cpu_index) { -int ret =monitor_set_cpu (&hmp.common, cpu_index); +int ret =monitor_set_cpu (&hmp.parent, cpu_index);if (ret <0 ) {error_setg (errp,QERR_INVALID_PARAMETER_VALUE ,"cpu-index" ,"a CPU number" );
@@ -181,12 +181,12 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,handle_hmp_command (&hmp, command_line); - WITH_QEMU_LOCK_GUARD(&hmp.common.mon_lock) { - output =g_strdup (hmp.common.outbuf->str); + WITH_QEMU_LOCK_GUARD(&hmp.parent.mon_lock) { + output =g_strdup (hmp.parent.outbuf->str); } out: -monitor_data_destroy (&hmp.common); +monitor_data_destroy (&hmp.parent);return output; }
ui/ui-hmp-cmds.c +1 -1
@@ -341,7 +341,7 @@ void hmp_change_vnc(Monitor *mon, const char *device, const char *target,return ; }if (!arg) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);monitor_read_password (hmp_mon, hmp_change_read_arg,NULL ); }else {qmp_change_vnc_password (arg, errp);
Signature · 1 line
2.53.0
Re: [PATCH 01/17] monitor: replace 'common' with 'parent' in MonitorHMP
Quoted 4 lines · * Daniel P. Berrangé ([email protected]) wrote:
The field name 'parent' is standard practice for QOM structs so align the HMP monitor.
Signed-off-by Daniel P. Berrangé <[email protected]>
Just a rename, fine;
Quoted 254 lines
--- monitor/hmp-cmds.c | 2 +- monitor/hmp.c | 40 +++++++++++++++++++------------------- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 6 +++--- monitor/qmp-cmds.c | 10 +++++----- ui/ui-hmp-cmds.c | 2 +- 6 files changed, 31 insertions(+), 31 deletions(-)monitor/hmp-cmds.c +1
-1@@ -236,7 +236,7 @@ void hmp_info_sync_profile(Monitor *mon, const QDict *qdict)void hmp_info_history (Monitor *mon,const QDict *qdict) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);int i;const char *str;monitor/hmp.c +20
-20@@ -47,9 +47,9 @@ static void monitor_command_cb(void *opaque, const char *cmdline, {MonitorHMP *mon = opaque; -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent);handle_hmp_command (mon, cmdline); -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }void monitor_read_command (MonitorHMP *mon,int show_prompt)@@ -72,7 +72,7 @@ int monitor_read_password(MonitorHMP *mon, ReadLineFunc *readline_func,/* prompt is printed on return from the command handler */ return 0 ; }else { -monitor_printf (&mon->common, +monitor_printf (&mon->parent,"terminal does not support password prompting\n" );return -ENOTTY ; }@@ -689,7 +689,7 @@ static const HMPCommand *monitor_parse_command(MonitorHMP *hmp_mon,const char **cmdp, HMPCommand *table) { - Monitor *mon = &hmp_mon->common; + Monitor *mon = &hmp_mon->parent;const char *p;const HMPCommand *cmd;char cmdname[256 ];@@ -1182,35 +1182,35 @@ void handle_hmp_command(MonitorHMP *mon, const char *cmdline)if (!cmd->cmd && !cmd->cmd_info_hrt) {/* FIXME: is it useful to try autoload modules here ??? */ -monitor_printf (&mon->common,"Command \"%.*s\" is not available.\n" , +monitor_printf (&mon->parent,"Command \"%.*s\" is not available.\n" , (int )(cmdline - cmd_start), cmd_start);return ; } - qdict =monitor_parse_arguments (&mon->common, &cmdline, cmd); + qdict =monitor_parse_arguments (&mon->parent, &cmdline, cmd);if (!qdict) {while (cmdline > cmd_start &&qemu_isspace (cmdline[-1 ])) { cmdline--; } -monitor_printf (&mon->common,"Try \"help %.*s\" for more information\n" , +monitor_printf (&mon->parent,"Try \"help %.*s\" for more information\n" , (int )(cmdline - cmd_start), cmd_start);return ; }if (!cmd->coroutine) {/* old_mon is non-NULL when called from qmp_human_monitor_command() */ -Monitor *old_mon =monitor_set_cur (qemu_coroutine_self (), &mon->common); -handle_hmp_command_exec (&mon->common, cmd, qdict); +Monitor *old_mon =monitor_set_cur (qemu_coroutine_self (), &mon->parent); +handle_hmp_command_exec (&mon->parent, cmd, qdict);monitor_set_cur (qemu_coroutine_self (), old_mon); }else {HandleHmpCommandCo data = { - .mon = &mon->common, + .mon = &mon->parent, .cmd = cmd, .qdict = qdict, .done = false, };Coroutine *co =qemu_coroutine_create (handle_hmp_command_co, &data); -monitor_set_cur (co, &mon->common); +monitor_set_cur (co, &mon->parent);aio_co_enter (qemu_get_aio_context (), co);AIO_WAIT_WHILE_UNLOCKED (NULL , !data.done); }@@ -1428,7 +1428,7 @@ cleanup:static void monitor_read (void *opaque,const uint8_t *buf,int size) { -MonitorHMP *mon =container_of (opaque, MonitorHMP, common); +MonitorHMP *mon =container_of (opaque, MonitorHMP, parent);int i;if (mon->rs) {@@ -1437,7 +1437,7 @@ static void monitor_read(void *opaque, const uint8_t *buf, int size) } }else {if (size ==0 || buf[size -1 ] !=0 ) { -monitor_printf (&mon->common,"corrupted command\n" ); +monitor_printf (&mon->parent,"corrupted command\n" ); }else {handle_hmp_command (mon, (char *)buf); }@@ -1506,26 +1506,26 @@ static void G_GNUC_PRINTF(2, 3) monitor_readline_printf(void *opaque,MonitorHMP *mon = opaque;va_list ap;va_start (ap, fmt); -monitor_vprintf (&mon->common, fmt, ap); +monitor_vprintf (&mon->parent, fmt, ap);va_end (ap); }static void monitor_readline_flush (void *opaque) {MonitorHMP *mon = opaque; -monitor_flush (&mon->common); +monitor_flush (&mon->parent); }void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) {MonitorHMP *mon =g_new0 (MonitorHMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -monitor_data_init (&mon->common, false, false, false); +monitor_data_init (&mon->parent, false, false, false); mon->use_readline = use_readline;if (mon->use_readline) {@@ -1536,9 +1536,9 @@ void monitor_init_hmp(Chardev *chr, bool use_readline, Error **errp)monitor_read_command (mon,0 ); } -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, monitor_read, - monitor_event,NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_read, + monitor_event,NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); }/** monitor/monitor-internal.h +1
-1@@ -119,7 +119,7 @@ struct Monitor { };struct MonitorHMP { -Monitor common; +Monitor parent;bool use_readline;/* * State used only in the thread "owning" the monitor. monitor/monitor.c +3
-3@@ -132,7 +132,7 @@ static inline bool monitor_is_hmp_non_interactive(const Monitor *mon)return false; } -return !monitor_uses_readline (container_of (mon, MonitorHMP, common)); +return !monitor_uses_readline (container_of (mon, MonitorHMP, parent)); } static gboolean monitor_unblocked(void *do_not_use, GIOCondition cond,@@ -542,7 +542,7 @@ static void monitor_accept_input(void *opaque)qemu_mutex_lock (&mon->mon_lock);if (!monitor_is_qmp (mon) && mon->reset_seen) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);assert (hmp_mon->rs);readline_restart (hmp_mon->rs);qemu_mutex_unlock (&mon->mon_lock);@@ -627,7 +627,7 @@ void monitor_data_destroy(Monitor *mon)if (monitor_is_qmp (mon)) {monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); }else { -readline_free (container_of (mon, MonitorHMP, common)->rs); +readline_free (container_of (mon, MonitorHMP, parent)->rs); }g_string_free (mon->outbuf, true);qemu_mutex_destroy (&mon->mon_lock);monitor/qmp-cmds.c +5
-5@@ -168,10 +168,10 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP hmp = {}; -monitor_data_init (&hmp.common, false, true, false); +monitor_data_init (&hmp.parent, false, true, false);if (has_cpu_index) { -int ret =monitor_set_cpu (&hmp.common, cpu_index); +int ret =monitor_set_cpu (&hmp.parent, cpu_index);if (ret <0 ) {error_setg (errp,QERR_INVALID_PARAMETER_VALUE ,"cpu-index" ,"a CPU number" );@@ -181,12 +181,12 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,handle_hmp_command (&hmp, command_line); - WITH_QEMU_LOCK_GUARD(&hmp.common.mon_lock) { - output =g_strdup (hmp.common.outbuf->str); + WITH_QEMU_LOCK_GUARD(&hmp.parent.mon_lock) { + output =g_strdup (hmp.parent.outbuf->str); } out: -monitor_data_destroy (&hmp.common); +monitor_data_destroy (&hmp.parent);return output; }ui/ui-hmp-cmds.c +1
-1@@ -341,7 +341,7 @@ void hmp_change_vnc(Monitor *mon, const char *device, const char *target,return ; }if (!arg) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, common); +MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent);monitor_read_password (hmp_mon, hmp_change_read_arg,NULL ); }else {qmp_change_vnc_password (arg, errp);Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 2/17 monitor: replace 'common' with 'parent' in MonitorQMP
In reply to Daniel P. BerrangéThe field name 'parent' is standard practice for QOM structs so align the QMP monitor.
--- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 4 ++-- monitor/qmp-cmds-control.c | 4 ++-- monitor/qmp.c | 40 +++++++++++++++++++------------------- 4 files changed, 25 insertions(+), 25 deletions(-)
monitor/monitor-internal.h +1 -1
@@ -132,7 +132,7 @@ struct MonitorHMP { }; typedef struct { - Monitor common; + Monitor parent; JSONMessageParser parser; bool pretty; /*
monitor/monitor.c +2 -2
@@ -308,7 +308,7 @@ static void monitor_qapi_event_emit(QAPIEvent event, QDict *qdict)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent); {QEMU_LOCK_GUARD (&mon->mon_lock);if (qmp_mon->commands == &qmp_cap_negotiation_commands) {
@@ -625,7 +625,7 @@ void monitor_data_destroy(Monitor *mon)g_free (mon->mon_cpu_path);qemu_chr_fe_deinit (&mon->chr, false);if (monitor_is_qmp (mon)) { -monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); +monitor_data_destroy_qmp (container_of (mon, MonitorQMP, parent)); }else {readline_free (container_of (mon, MonitorHMP, parent)->rs); }
monitor/qmp-cmds-control.c +2 -2
@@ -76,7 +76,7 @@ void qmp_qmp_capabilities(bool has_enable, QMPCapabilityList *enable,MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);if (mon->commands == &qmp_commands) { error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
@@ -126,7 +126,7 @@ CommandInfoList *qmp_query_commands(Error **errp)MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);qmp_for_each_command (mon->commands, query_commands_cb, &list);
monitor/qmp.c +20 -20
@@ -80,7 +80,7 @@ static void monitor_qmp_caps_reset(MonitorQMP *mon) {memset (mon->capab_offered,0 ,sizeof (mon->capab_offered));memset (mon->capab,0 ,sizeof (mon->capab)); - mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->common.use_io_thread; + mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->parent.use_io_thread; }static void qmp_request_free (QMPRequest *req)
@@ -124,7 +124,7 @@ static void monitor_qmp_cleanup_queue_and_resume(MonitorQMP *mon)* when we get here while the monitor is suspended. An * unfortunately timed CHR_EVENT_CLOSED can do the trick. */ -monitor_resume (&mon->common); +monitor_resume (&mon->parent); } }
@@ -139,7 +139,7 @@ void qmp_send_response(MonitorQMP *mon, const QDict *rsp)trace_monitor_qmp_respond (mon, json->str);g_string_append_c (json,'\n' ); -monitor_puts (&mon->common, json->str); +monitor_puts (&mon->parent, json->str);g_string_free (json, true); }
@@ -166,7 +166,7 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)QDict *error; rsp =qmp_dispatch (mon->commands, req,qmp_oob_enabled (mon), - &mon->common); + &mon->parent);if (mon->commands == &qmp_cap_negotiation_commands) { error =qdict_get_qdict (rsp,"error" );
@@ -207,7 +207,7 @@ static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent);qemu_mutex_lock (&qmp_mon->qmp_queue_lock); req_obj =g_queue_pop_head (qmp_mon->qmp_requests);if (req_obj) {
@@ -302,7 +302,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) oob_enabled =qmp_oob_enabled (mon);if (oob_enabled && mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }/*
@@ -343,7 +343,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) }if (!oob_enabled) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }qmp_request_free (req_obj);
@@ -408,7 +408,7 @@ static void handle_qmp_command(void *opaque, QObject *req, Error *err)*/ if (!qmp_oob_enabled (mon) || mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent); }/*
@@ -462,7 +462,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)switch (event) {case CHR_EVENT_OPENED : - WITH_QEMU_LOCK_GUARD(&mon->common.mon_lock) { + WITH_QEMU_LOCK_GUARD(&mon->parent.mon_lock) { mon->commands = &qmp_cap_negotiation_commands;monitor_qmp_caps_reset (mon); }
@@ -504,27 +504,27 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)MonitorQMP *mon = opaque;GMainContext *context; -assert (mon->common.use_io_thread); +assert (mon->parent.use_io_thread); context =iothread_get_g_main_context (mon_iothread);assert (context); -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common, context, true); -monitor_list_append (&mon->common); +NULL , &mon->parent, context, true); +monitor_list_append (&mon->parent); }void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -qemu_chr_fe_set_echo (&mon->common.chr, true); +qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->common, true, false, +monitor_data_init (&mon->parent, true, false,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;
@@ -533,7 +533,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) mon->qmp_requests =g_queue_new ();json_message_parser_init (&mon->parser, handle_qmp_command, mon,NULL ); -if (mon->common.use_io_thread) { +if (mon->parent.use_io_thread) {/* * Make sure the old iowatch is gone. It's possible when * e.g. the chardev is in client mode, with wait=on.
@@ -553,9 +553,9 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) monitor_qmp_setup_handlers_bh, mon);/* The bottom half will add @mon to @mon_list */ }else { -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); } }
Signature · 1 line
2.53.0
Re: [PATCH 02/17] monitor: replace 'common' with 'parent' in MonitorQMP
Quoted 2 lines · Daniel P. Berrangé
The field name 'parent' is standard practice for QOM structs so align the QMP monitor.
This is not correct: the first field of a QOM object struct should be called parent_obj, followed by an empty line as per our style guidelines at https://qemu.readthedocs.io/en/master/devel/style.html#qemu-object-model-declarations.
Quoted 197 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 4 ++-- monitor/qmp-cmds-control.c | 4 ++-- monitor/qmp.c | 40 +++++++++++++++++++------------------- 4 files changed, 25 insertions(+), 25 deletions(-)monitor/monitor-internal.h +1
-1@@ -132,7 +132,7 @@ struct MonitorHMP { }; typedef struct { - Monitor common; + Monitor parent; JSONMessageParser parser; bool pretty; /*monitor/monitor.c +2
-2@@ -308,7 +308,7 @@ static void monitor_qapi_event_emit(QAPIEvent event, QDict *qdict)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent); {QEMU_LOCK_GUARD (&mon->mon_lock);if (qmp_mon->commands == &qmp_cap_negotiation_commands) {@@ -625,7 +625,7 @@ void monitor_data_destroy(Monitor *mon)g_free (mon->mon_cpu_path);qemu_chr_fe_deinit (&mon->chr, false);if (monitor_is_qmp (mon)) { -monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); +monitor_data_destroy_qmp (container_of (mon, MonitorQMP, parent)); }else {readline_free (container_of (mon, MonitorHMP, parent)->rs); }monitor/qmp-cmds-control.c +2
-2@@ -76,7 +76,7 @@ void qmp_qmp_capabilities(bool has_enable, QMPCapabilityList *enable,MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);if (mon->commands == &qmp_commands) { error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,@@ -126,7 +126,7 @@ CommandInfoList *qmp_query_commands(Error **errp)MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);qmp_for_each_command (mon->commands, query_commands_cb, &list);monitor/qmp.c +17
-17@@ -80,7 +80,7 @@ static void monitor_qmp_caps_reset(MonitorQMP *mon) {memset (mon->capab_offered,0 ,sizeof (mon->capab_offered));memset (mon->capab,0 ,sizeof (mon->capab)); - mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->common.use_io_thread; + mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->parent.use_io_thread; }static void qmp_request_free (QMPRequest *req)@@ -124,7 +124,7 @@ static void monitor_qmp_cleanup_queue_and_resume(MonitorQMP *mon)* when we get here while the monitor is suspended. An * unfortunately timed CHR_EVENT_CLOSED can do the trick. */ -monitor_resume (&mon->common); +monitor_resume (&mon->parent); } }@@ -139,7 +139,7 @@ void qmp_send_response(MonitorQMP *mon, const QDict *rsp)trace_monitor_qmp_respond (mon, json->str);g_string_append_c (json,'\n' ); -monitor_puts (&mon->common, json->str); +monitor_puts (&mon->parent, json->str);g_string_free (json, true); }@@ -166,7 +166,7 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)QDict *error; rsp =qmp_dispatch (mon->commands, req,qmp_oob_enabled (mon), - &mon->common); + &mon->parent);if (mon->commands == &qmp_cap_negotiation_commands) { error =qdict_get_qdict (rsp,"error" );@@ -207,7 +207,7 @@ static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent);qemu_mutex_lock (&qmp_mon->qmp_queue_lock); req_obj =g_queue_pop_head (qmp_mon->qmp_requests);if (req_obj) {@@ -302,7 +302,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) oob_enabled =qmp_oob_enabled (mon);if (oob_enabled && mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }/* @@ -343,7 +343,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) }if (!oob_enabled) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }qmp_request_free (req_obj);@@ -408,7 +408,7 @@ static void handle_qmp_command(void *opaque, QObject *req, Error *err)*/ if (!qmp_oob_enabled (mon) || mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent); }/* @@ -462,7 +462,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)switch (event) {case CHR_EVENT_OPENED : - WITH_QEMU_LOCK_GUARD(&mon->common.mon_lock) { + WITH_QEMU_LOCK_GUARD(&mon->parent.mon_lock) { mon->commands = &qmp_cap_negotiation_commands;monitor_qmp_caps_reset (mon); }@@ -504,27 +504,27 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)MonitorQMP *mon = opaque;GMainContext *context; -assert (mon->common.use_io_thread); +assert (mon->parent.use_io_thread); context =iothread_get_g_main_context (mon_iothread);assert (context); -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common, context, true); -monitor_list_append (&mon->common); +NULL , &mon->parent, context, true); +monitor_list_append (&mon->parent); }void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -qemu_chr_fe_set_echo (&mon->common.chr, true); +qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->common, true, false, +monitor_data_init (&mon->parent, true, false,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;@@ -533,7 +533,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) mon->qmp_requests =g_queue_new ();json_message_parser_init (&mon->parser, handle_qmp_command, mon,NULL ); -if (mon->common.use_io_thread) { +if (mon->parent.use_io_thread) {/* * Make sure the old iowatch is gone. It's possible when * e.g. the chardev is in client mode, with wait=on. @@ -553,9 +553,9 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) monitor_qmp_setup_handlers_bh, mon);/* The bottom half will add @mon to @mon_list */
monitor/qmp.c void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) · line 561
Quoted 10 lines
monitor/qmp.c +3
-3}else { -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); } }
ATB,
Mark.
Re: [PATCH 02/17] monitor: replace 'common' with 'parent' in MonitorQMP
Quoted 7 lines · Mark Cave-Ayland
Quoted 2 lines · Daniel P. Berrangé
The field name 'parent' is standard practice for QOM structs so align the QMP monitor.
This is not correct: the first field of a QOM object struct should be called
parent_obj, followed by an empty line as per our style guidelines at https://qemu.readthedocs.io/en/master/devel/style.html#qemu-object-model-declarations.
Sigh, of course we're massively inconsistent in this :-(
I initially just checked 1st level objects, which favours 'parent'
$ git grep 'Object parent;' | wc -l 34 $ git grep 'Object parent_obj;' | wc -l 18
but I should have checked more deeply
$ git grep -E '(\w+) parent_obj;' | wc -l 859 $ git grep -E '(\w+) parent;' | wc -l 269
I'll switch to 'parent_obj' here.
Quoted 187 lines
Quoted 173 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 4 ++-- monitor/qmp-cmds-control.c | 4 ++-- monitor/qmp.c | 40 +++++++++++++++++++------------------- 4 files changed, 25 insertions(+), 25 deletions(-)monitor/monitor-internal.h +1
-1@@ -132,7 +132,7 @@ struct MonitorHMP { }; typedef struct { - Monitor common; + Monitor parent; JSONMessageParser parser; bool pretty; /*monitor/monitor.c +2
-2@@ -308,7 +308,7 @@ static void monitor_qapi_event_emit(QAPIEvent event, QDict *qdict)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent); {QEMU_LOCK_GUARD (&mon->mon_lock);if (qmp_mon->commands == &qmp_cap_negotiation_commands) {@@ -625,7 +625,7 @@ void monitor_data_destroy(Monitor *mon)g_free (mon->mon_cpu_path);qemu_chr_fe_deinit (&mon->chr, false);if (monitor_is_qmp (mon)) { -monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); +monitor_data_destroy_qmp (container_of (mon, MonitorQMP, parent)); }else {readline_free (container_of (mon, MonitorHMP, parent)->rs); }monitor/qmp-cmds-control.c +2
-2@@ -76,7 +76,7 @@ void qmp_qmp_capabilities(bool has_enable, QMPCapabilityList *enable,MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);if (mon->commands == &qmp_commands) { error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,@@ -126,7 +126,7 @@ CommandInfoList *qmp_query_commands(Error **errp)MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);qmp_for_each_command (mon->commands, query_commands_cb, &list);monitor/qmp.c +17
-17@@ -80,7 +80,7 @@ static void monitor_qmp_caps_reset(MonitorQMP *mon) {memset (mon->capab_offered,0 ,sizeof (mon->capab_offered));memset (mon->capab,0 ,sizeof (mon->capab)); - mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->common.use_io_thread; + mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->parent.use_io_thread; }static void qmp_request_free (QMPRequest *req)@@ -124,7 +124,7 @@ static void monitor_qmp_cleanup_queue_and_resume(MonitorQMP *mon)* when we get here while the monitor is suspended. An * unfortunately timed CHR_EVENT_CLOSED can do the trick. */ -monitor_resume (&mon->common); +monitor_resume (&mon->parent); } }@@ -139,7 +139,7 @@ void qmp_send_response(MonitorQMP *mon, const QDict *rsp)trace_monitor_qmp_respond (mon, json->str);g_string_append_c (json,'\n' ); -monitor_puts (&mon->common, json->str); +monitor_puts (&mon->parent, json->str);g_string_free (json, true); }@@ -166,7 +166,7 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)QDict *error; rsp =qmp_dispatch (mon->commands, req,qmp_oob_enabled (mon), - &mon->common); + &mon->parent);if (mon->commands == &qmp_cap_negotiation_commands) { error =qdict_get_qdict (rsp,"error" );@@ -207,7 +207,7 @@ static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent);qemu_mutex_lock (&qmp_mon->qmp_queue_lock); req_obj =g_queue_pop_head (qmp_mon->qmp_requests);if (req_obj) {@@ -302,7 +302,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) oob_enabled =qmp_oob_enabled (mon);if (oob_enabled && mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }/* @@ -343,7 +343,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) }if (!oob_enabled) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }qmp_request_free (req_obj);@@ -408,7 +408,7 @@ static void handle_qmp_command(void *opaque, QObject *req, Error *err)*/ if (!qmp_oob_enabled (mon) || mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent); }/* @@ -462,7 +462,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)switch (event) {case CHR_EVENT_OPENED : - WITH_QEMU_LOCK_GUARD(&mon->common.mon_lock) { + WITH_QEMU_LOCK_GUARD(&mon->parent.mon_lock) { mon->commands = &qmp_cap_negotiation_commands;monitor_qmp_caps_reset (mon); }@@ -504,27 +504,27 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)MonitorQMP *mon = opaque;GMainContext *context; -assert (mon->common.use_io_thread); +assert (mon->parent.use_io_thread); context =iothread_get_g_main_context (mon_iothread);assert (context); -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common, context, true); -monitor_list_append (&mon->common); +NULL , &mon->parent, context, true); +monitor_list_append (&mon->parent); }void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -qemu_chr_fe_set_echo (&mon->common.chr, true); +qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->common, true, false, +monitor_data_init (&mon->parent, true, false,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;@@ -533,7 +533,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) mon->qmp_requests =g_queue_new ();json_message_parser_init (&mon->parser, handle_qmp_command, mon,NULL ); -if (mon->common.use_io_thread) { +if (mon->parent.use_io_thread) {/* * Make sure the old iowatch is gone. It's possible when * e.g. the chardev is in client mode, with wait=on. @@ -553,9 +553,9 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) monitor_qmp_setup_handlers_bh, mon);/* The bottom half will add @mon to @mon_list */ monitor/qmp.c void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) · line 561
Quoted 10 lines
monitor/qmp.c +3
-3}else { -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); } }ATB,
Quoted 2 lines
Mark.
With regards,
Daniel
Signature · 3 lines
|: https://berrange.com ~~ https://hachyderm.io/@berrange :| |: https://libvirt.org ~~ https://entangle-photo.org :| |: https://pixelfed.art/berrange ~~ https://fstop138.berrange.com :|
Re: [PATCH 02/17] monitor: replace 'common' with 'parent' in MonitorQMP
Quoted 10 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 7 lines · Mark Cave-Ayland
Quoted 2 lines · Daniel P. Berrangé
The field name 'parent' is standard practice for QOM structs so align the QMP monitor.
This is not correct: the first field of a QOM object struct should be called
parent_obj, followed by an empty line as per our style guidelines at https://qemu.readthedocs.io/en/master/devel/style.html#qemu-object-model-declarations.Sigh, of course we're massively inconsistent in this :-(
Because it's all manual!
It needs macro'ing, and linting.
Dave
Quoted 213 lines
I initially just checked 1st level objects, which favours 'parent'
$ git grep 'Object parent;' | wc -l 34 $ git grep 'Object parent_obj;' | wc -l 18but I should have checked more deeply
$ git grep -E '(\w+) parent_obj;' | wc -l 859 $ git grep -E '(\w+) parent;' | wc -l 269I'll switch to '
parent_obj' here.Quoted 187 lines
Quoted 173 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/monitor-internal.h | 2 +- monitor/monitor.c | 4 ++-- monitor/qmp-cmds-control.c | 4 ++-- monitor/qmp.c | 40 +++++++++++++++++++------------------- 4 files changed, 25 insertions(+), 25 deletions(-)monitor/monitor-internal.h +1
-1@@ -132,7 +132,7 @@ struct MonitorHMP { }; typedef struct { - Monitor common; + Monitor parent; JSONMessageParser parser; bool pretty; /*monitor/monitor.c +2
-2@@ -308,7 +308,7 @@ static void monitor_qapi_event_emit(QAPIEvent event, QDict *qdict)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent); {QEMU_LOCK_GUARD (&mon->mon_lock);if (qmp_mon->commands == &qmp_cap_negotiation_commands) {@@ -625,7 +625,7 @@ void monitor_data_destroy(Monitor *mon)g_free (mon->mon_cpu_path);qemu_chr_fe_deinit (&mon->chr, false);if (monitor_is_qmp (mon)) { -monitor_data_destroy_qmp (container_of (mon, MonitorQMP, common)); +monitor_data_destroy_qmp (container_of (mon, MonitorQMP, parent)); }else {readline_free (container_of (mon, MonitorHMP, parent)->rs); }monitor/qmp-cmds-control.c +2
-2@@ -76,7 +76,7 @@ void qmp_qmp_capabilities(bool has_enable, QMPCapabilityList *enable,MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);if (mon->commands == &qmp_commands) { error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,@@ -126,7 +126,7 @@ CommandInfoList *qmp_query_commands(Error **errp)MonitorQMP *mon;assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, common); + mon =container_of (cur_mon, MonitorQMP, parent);qmp_for_each_command (mon->commands, query_commands_cb, &list);monitor/qmp.c +17
-17@@ -80,7 +80,7 @@ static void monitor_qmp_caps_reset(MonitorQMP *mon) {memset (mon->capab_offered,0 ,sizeof (mon->capab_offered));memset (mon->capab,0 ,sizeof (mon->capab)); - mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->common.use_io_thread; + mon->capab_offered[QMP_CAPABILITY_OOB ] = mon->parent.use_io_thread; }static void qmp_request_free (QMPRequest *req)@@ -124,7 +124,7 @@ static void monitor_qmp_cleanup_queue_and_resume(MonitorQMP *mon)* when we get here while the monitor is suspended. An * unfortunately timed CHR_EVENT_CLOSED can do the trick. */ -monitor_resume (&mon->common); +monitor_resume (&mon->parent); } }@@ -139,7 +139,7 @@ void qmp_send_response(MonitorQMP *mon, const QDict *rsp)trace_monitor_qmp_respond (mon, json->str);g_string_append_c (json,'\n' ); -monitor_puts (&mon->common, json->str); +monitor_puts (&mon->parent, json->str);g_string_free (json, true); }@@ -166,7 +166,7 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)QDict *error; rsp =qmp_dispatch (mon->commands, req,qmp_oob_enabled (mon), - &mon->common); + &mon->parent);if (mon->commands == &qmp_cap_negotiation_commands) { error =qdict_get_qdict (rsp,"error" );@@ -207,7 +207,7 @@ static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)continue ; } - qmp_mon =container_of (mon, MonitorQMP, common); + qmp_mon =container_of (mon, MonitorQMP, parent);qemu_mutex_lock (&qmp_mon->qmp_queue_lock); req_obj =g_queue_pop_head (qmp_mon->qmp_requests);if (req_obj) {@@ -302,7 +302,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) oob_enabled =qmp_oob_enabled (mon);if (oob_enabled && mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }/* @@ -343,7 +343,7 @@ void coroutine_fn monitor_qmp_dispatcher_co(void *data) }if (!oob_enabled) { -monitor_resume (&mon->common); +monitor_resume (&mon->parent); }qmp_request_free (req_obj);@@ -408,7 +408,7 @@ static void handle_qmp_command(void *opaque, QObject *req, Error *err)*/ if (!qmp_oob_enabled (mon) || mon->qmp_requests->length ==QMP_REQ_QUEUE_LEN_MAX -1 ) { -monitor_suspend (&mon->common); +monitor_suspend (&mon->parent); }/* @@ -462,7 +462,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)switch (event) {case CHR_EVENT_OPENED : - WITH_QEMU_LOCK_GUARD(&mon->common.mon_lock) { + WITH_QEMU_LOCK_GUARD(&mon->parent.mon_lock) { mon->commands = &qmp_cap_negotiation_commands;monitor_qmp_caps_reset (mon); }@@ -504,27 +504,27 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)MonitorQMP *mon = opaque;GMainContext *context; -assert (mon->common.use_io_thread); +assert (mon->parent.use_io_thread); context =iothread_get_g_main_context (mon_iothread);assert (context); -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common, context, true); -monitor_list_append (&mon->common); +NULL , &mon->parent, context, true); +monitor_list_append (&mon->parent); }void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 ); -if (!qemu_chr_fe_init (&mon->common.chr, chr, errp)) { +if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) {g_free (mon);return ; } -qemu_chr_fe_set_echo (&mon->common.chr, true); +qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->common, true, false, +monitor_data_init (&mon->parent, true, false,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;@@ -533,7 +533,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) mon->qmp_requests =g_queue_new ();json_message_parser_init (&mon->parser, handle_qmp_command, mon,NULL ); -if (mon->common.use_io_thread) { +if (mon->parent.use_io_thread) {/* * Make sure the old iowatch is gone. It's possible when * e.g. the chardev is in client mode, with wait=on. @@ -553,9 +553,9 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) monitor_qmp_setup_handlers_bh, mon);/* The bottom half will add @mon to @mon_list */ monitor/qmp.c void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp) · line 561
Quoted 10 lines
monitor/qmp.c +3
-3}else { -qemu_chr_fe_set_handlers (&mon->common.chr, monitor_can_read, +qemu_chr_fe_set_handlers (&mon->parent.chr, monitor_can_read, monitor_qmp_read, monitor_qmp_event, -NULL , &mon->common,NULL , true); -monitor_list_append (&mon->common); +NULL , &mon->parent,NULL , true); +monitor_list_append (&mon->parent); } }ATB,
Quoted 2 lines
Mark.
With regards,
DanielSignature · 3 lines
|: https://berrange.com ~~ https://hachyderm.io/@berrange :| |: https://libvirt.org ~~ https://entangle-photo.org :| |: https://pixelfed.art/berrange ~~ https://fstop138.berrange.com :|
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 3/17 monitor: rename monitor_init* to monitor_new*
In reply to Daniel P. BerrangéThe current "monitor_init" functions will clash with the methods of the same name that are required by QOM. To ease the transition to QOM, rename them out of the way.
--- chardev/char.c | 2 +- gdbstub/system.c | 2 +- include/monitor/monitor.h | 8 ++++---- monitor/hmp.c | 2 +- monitor/monitor.c | 10 +++++----- monitor/qmp.c | 2 +- storage-daemon/qemu-storage-daemon.c | 2 +- stubs/monitor-internal.c | 2 +- system/vl.c | 2 +- 9 files changed, 16 insertions(+), 16 deletions(-)
chardev/char.c +1 -1
@@ -786,7 +786,7 @@ static Chardev *qemu_chr_new_from_name(const char *label, const char *filename,if (qemu_opt_get_bool (opts,"mux" ,0 )) {assert (permit_mux_mon); -monitor_init_hmp (chr, true, &err); +monitor_new_hmp (chr, true, &err);if (err) {error_report_err (err);object_unparent (OBJECT (chr));
gdbstub/system.c +1 -1
@@ -388,7 +388,7 @@ bool gdbserver_start(const char *device, Error **errp)/* Initialize a monitor terminal for gdb */ mon_chr =qemu_chardev_new (NULL ,TYPE_CHARDEV_GDB ,NULL ,NULL , &error_abort); -monitor_init_hmp (mon_chr, false, &error_abort); +monitor_new_hmp (mon_chr, false, &error_abort); }else {qemu_chr_fe_deinit (&gdbserver_system_state.chr, true); mon_chr = gdbserver_system_state.mon_chr;
include/monitor/monitor.h +4 -4
@@ -19,10 +19,10 @@ bool monitor_cur_is_qmp(void);void monitor_init_globals (void );void monitor_init_globals_core (void ); -void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp); -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp); -int monitor_init (MonitorOptions *opts,bool allow_hmp,Error **errp); -int monitor_init_opts (QemuOpts *opts,Error **errp); +void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp); +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp); +int monitor_new (MonitorOptions *opts,bool allow_hmp,Error **errp); +int monitor_new_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void );int monitor_suspend (Monitor *mon);
monitor/hmp.c +1 -1
@@ -1516,7 +1516,7 @@ static void monitor_readline_flush(void *opaque)monitor_flush (&mon->parent); } -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) {MonitorHMP *mon =g_new0 (MonitorHMP,1 );
monitor/monitor.c +5 -5
@@ -715,7 +715,7 @@ void monitor_init_globals(void)aio_co_schedule (iohandler_get_aio_context (), qmp_dispatcher_co); } -int monitor_init (MonitorOptions *opts,bool allow_hmp,Error **errp) +int monitor_new (MonitorOptions *opts,bool allow_hmp,Error **errp) {ERRP_GUARD ();Chardev *chr;
@@ -732,7 +732,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)switch (opts->mode) {case MONITOR_MODE_CONTROL : -monitor_init_qmp (chr, opts->pretty, errp); +monitor_new_qmp (chr, opts->pretty, errp);break ;case MONITOR_MODE_READLINE :if (!allow_hmp) {
@@ -743,7 +743,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)error_setg (errp,"'pretty' is not compatible with HMP monitors" );return -1 ; } -monitor_init_hmp (chr, true, errp); +monitor_new_hmp (chr, true, errp);break ;default :g_assert_not_reached ();
@@ -752,7 +752,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)return *errp ?-1 :0 ; } -int monitor_init_opts (QemuOpts *opts,Error **errp) +int monitor_new_opts (QemuOpts *opts,Error **errp) {Visitor *v;MonitorOptions *options;
@@ -765,7 +765,7 @@ int monitor_init_opts(QemuOpts *opts, Error **errp)return -1 ; } - ret =monitor_init (options, true, errp); + ret =monitor_new (options, true, errp);qapi_free_MonitorOptions (options);return ret; }
monitor/qmp.c +1 -1
@@ -513,7 +513,7 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)monitor_list_append (&mon->parent); } -void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) +void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 );
storage-daemon/qemu-storage-daemon.c +1 -1
@@ -330,7 +330,7 @@ static void process_options(int argc, char *argv[], bool pre_init_pass)visit_free (v);/* TODO Catch duplicate monitor IDs */ -monitor_init (monitor, false, &error_fatal); +monitor_new (monitor, false, &error_fatal);qapi_free_MonitorOptions (monitor);break ; }
stubs/monitor-internal.c +1 -1
@@ -8,6 +8,6 @@ int monitor_get_fd(Monitor *mon, const char *name, Error **errp)return -1 ; } -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) { }
system/vl.c +1 -1
@@ -1244,7 +1244,7 @@ static int fsdev_init_func(void *opaque, QemuOpts *opts, Error **errp)static int mon_init_func (void *opaque,QemuOpts *opts,Error **errp) { -return monitor_init_opts (opts, errp); +return monitor_new_opts (opts, errp); }static void monitor_parse (const char *str,const char *mode,bool pretty)
Signature · 1 line
2.53.0
Re: [PATCH 03/17] monitor: rename monitor_init* to monitor_new*
Quoted 5 lines · * Daniel P. Berrangé ([email protected]) wrote:
The current "
monitor_init" functions will clash with the methods of the same name that are required by QOM. To ease the transition to QOM, rename them out of the way.Signed-off-by Daniel P. Berrangé <[email protected]>
Quoted 173 lines
--- chardev/char.c | 2 +- gdbstub/system.c | 2 +- include/monitor/monitor.h | 8 ++++---- monitor/hmp.c | 2 +- monitor/monitor.c | 10 +++++----- monitor/qmp.c | 2 +- storage-daemon/qemu-storage-daemon.c | 2 +- stubs/monitor-internal.c | 2 +- system/vl.c | 2 +- 9 files changed, 16 insertions(+), 16 deletions(-)chardev/char.c +1
-1@@ -786,7 +786,7 @@ static Chardev *qemu_chr_new_from_name(const char *label, const char *filename,if (qemu_opt_get_bool (opts,"mux" ,0 )) {assert (permit_mux_mon); -monitor_init_hmp (chr, true, &err); +monitor_new_hmp (chr, true, &err);if (err) {error_report_err (err);object_unparent (OBJECT (chr));gdbstub/system.c +1
-1@@ -388,7 +388,7 @@ bool gdbserver_start(const char *device, Error **errp)/* Initialize a monitor terminal for gdb */ mon_chr =qemu_chardev_new (NULL ,TYPE_CHARDEV_GDB ,NULL ,NULL , &error_abort); -monitor_init_hmp (mon_chr, false, &error_abort); +monitor_new_hmp (mon_chr, false, &error_abort); }else {qemu_chr_fe_deinit (&gdbserver_system_state.chr, true); mon_chr = gdbserver_system_state.mon_chr;include/monitor/monitor.h +4
-4@@ -19,10 +19,10 @@ bool monitor_cur_is_qmp(void);void monitor_init_globals (void );void monitor_init_globals_core (void ); -void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp); -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp); -int monitor_init (MonitorOptions *opts,bool allow_hmp,Error **errp); -int monitor_init_opts (QemuOpts *opts,Error **errp); +void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp); +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp); +int monitor_new (MonitorOptions *opts,bool allow_hmp,Error **errp); +int monitor_new_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void );int monitor_suspend (Monitor *mon);monitor/hmp.c +1
-1@@ -1516,7 +1516,7 @@ static void monitor_readline_flush(void *opaque)monitor_flush (&mon->parent); } -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) {MonitorHMP *mon =g_new0 (MonitorHMP,1 );monitor/monitor.c +5
-5@@ -715,7 +715,7 @@ void monitor_init_globals(void)aio_co_schedule (iohandler_get_aio_context (), qmp_dispatcher_co); } -int monitor_init (MonitorOptions *opts,bool allow_hmp,Error **errp) +int monitor_new (MonitorOptions *opts,bool allow_hmp,Error **errp) {ERRP_GUARD ();Chardev *chr;@@ -732,7 +732,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)switch (opts->mode) {case MONITOR_MODE_CONTROL : -monitor_init_qmp (chr, opts->pretty, errp); +monitor_new_qmp (chr, opts->pretty, errp);break ;case MONITOR_MODE_READLINE :if (!allow_hmp) {@@ -743,7 +743,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)error_setg (errp,"'pretty' is not compatible with HMP monitors" );return -1 ; } -monitor_init_hmp (chr, true, errp); +monitor_new_hmp (chr, true, errp);break ;default :g_assert_not_reached ();@@ -752,7 +752,7 @@ int monitor_init(MonitorOptions *opts, bool allow_hmp, Error **errp)return *errp ?-1 :0 ; } -int monitor_init_opts (QemuOpts *opts,Error **errp) +int monitor_new_opts (QemuOpts *opts,Error **errp) {Visitor *v;MonitorOptions *options;@@ -765,7 +765,7 @@ int monitor_init_opts(QemuOpts *opts, Error **errp)return -1 ; } - ret =monitor_init (options, true, errp); + ret =monitor_new (options, true, errp);qapi_free_MonitorOptions (options);return ret; }monitor/qmp.c +1
-1@@ -513,7 +513,7 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)monitor_list_append (&mon->parent); } -void monitor_init_qmp (Chardev *chr,bool pretty,Error **errp) +void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp) {MonitorQMP *mon =g_new0 (MonitorQMP,1 );storage-daemon/qemu-storage-daemon.c +1
-1@@ -330,7 +330,7 @@ static void process_options(int argc, char *argv[], bool pre_init_pass)visit_free (v);/* TODO Catch duplicate monitor IDs */ -monitor_init (monitor, false, &error_fatal); +monitor_new (monitor, false, &error_fatal);qapi_free_MonitorOptions (monitor);break ; }stubs/monitor-internal.c +1
-1@@ -8,6 +8,6 @@ int monitor_get_fd(Monitor *mon, const char *name, Error **errp)return -1 ; } -void monitor_init_hmp (Chardev *chr,bool use_readline,Error **errp) +void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) { }system/vl.c +1
-1@@ -1244,7 +1244,7 @@ static int fsdev_init_func(void *opaque, QemuOpts *opts, Error **errp)static int mon_init_func (void *opaque,QemuOpts *opts,Error **errp) { -return monitor_init_opts (opts, errp); +return monitor_new_opts (opts, errp); }static void monitor_parse (const char *str,const char *mode,bool pretty)Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 4/17 monitor: minimal conversion of monitors to QOM
In reply to Daniel P. BerrangéThis introduces a Monitor QOM object, with MonitorHMP and MonitorQMP subclasses. This is the bare minimum conversion of just the type declarations and replacing g_new/g_free with object_new/object_unref.
--- include/monitor/monitor.h | 11 ++++++++++- monitor/hmp.c | 18 ++++++++++++++++-- monitor/monitor-internal.h | 18 ++++++++++++++++-- monitor/monitor.c | 18 ++++++++++++++++-- monitor/qmp-cmds.c | 15 ++++++++------- monitor/qmp.c | 18 ++++++++++++++++-- 6 files changed, 82 insertions(+), 16 deletions(-)
include/monitor/monitor.h +10 -1
@@ -5,8 +5,17 @@#include "qapi/qapi-types-misc.h" #include "qemu/readline.h" #include "exec/hwaddr.h" +#include "qom/object.h" + +#define TYPE_MONITOR "monitor" +OBJECT_DECLARE_TYPE (Monitor, MonitorClass,MONITOR ); + +#define TYPE_MONITOR_HMP "monitor-hmp" +OBJECT_DECLARE_TYPE (MonitorHMP, MonitorHMPClass,MONITOR_HMP ); + +#define TYPE_MONITOR_QMP "monitor-qmp" +OBJECT_DECLARE_TYPE (MonitorQMP, MonitorQMPClass,MONITOR_QMP ); -typedef struct MonitorHMP MonitorHMP ;typedef struct MonitorOptions MonitorOptions ;#define QMP_REQ_QUEUE_LEN_MAX 8
monitor/hmp.c +16 -2
@@ -42,6 +42,20 @@#include "system/block-backend.h" #include "trace.h" +OBJECT_DEFINE_TYPE (MonitorHMP, monitor_hmp,MONITOR_HMP ,MONITOR ); + +static void monitor_hmp_finalize (Object *obj) +{ +} + +static void monitor_hmp_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_hmp_init (Object *obj) +{ +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {
@@ -1518,10 +1532,10 @@ static void monitor_readline_flush(void *opaque)void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) { -MonitorHMP *mon =g_new0 (MonitorHMP,1 ); +MonitorHMP *mon =MONITOR_HMP (object_new (TYPE_MONITOR_HMP ));if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) { -g_free (mon); +object_unref (mon);return ; }
monitor/monitor-internal.h +16 -2
@@ -92,7 +92,13 @@ typedef struct HMPCommand {void (*command_completion)(ReadLineState *rs,int nb_args,const char *str); } HMPCommand; + +struct MonitorClass { +ObjectClass parent_class; +}; +struct Monitor { +Object parent;CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp;
@@ -118,6 +124,10 @@ struct Monitor {int reset_seen; }; +struct MonitorHMPClass { +MonitorClass parent_class; +}; +struct MonitorHMP {Monitor parent;bool use_readline;
@@ -131,7 +141,11 @@ struct MonitorHMP {ReadLineState *rs; }; -typedef struct { +struct MonitorQMPClass { +MonitorClass parent_class; +}; + +struct MonitorQMP {Monitor parent;JSONMessageParser parser;bool pretty;
@@ -151,7 +165,7 @@ typedef struct {QemuMutex qmp_queue_lock;/* Input queue that holds all the parsed QMP requests */ GQueue *qmp_requests; -} MonitorQMP; +};/** * Is @mon a QMP monitor?
monitor/monitor.c +16 -2
@@ -73,6 +73,20 @@ static GHashTable *coroutine_mon; /* Maps Coroutine* to Monitor* */MonitorList mon_list;static bool monitor_destroyed; +OBJECT_DEFINE_TYPE (Monitor, monitor,MONITOR ,OBJECT ); + +static void monitor_finalize (Object *obj) +{ +} + +static void monitor_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_init (Object *obj) +{ +} +Monitor *monitor_cur (void ) {Monitor *mon;
@@ -598,7 +612,7 @@ void monitor_list_append(Monitor *mon)if (mon) {monitor_data_destroy (mon); -g_free (mon); +object_unref (mon); } }
@@ -680,7 +694,7 @@ void monitor_cleanup(void)monitor_flush (mon);monitor_data_destroy (mon);qemu_mutex_lock (&monitor_lock); -g_free (mon); +object_unref (mon); }qemu_mutex_unlock (&monitor_lock);
monitor/qmp-cmds.c +8 -7
@@ -166,12 +166,12 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index, int64_t cpu_index, Error **errp) { char *output = NULL; -MonitorHMP hmp = {}; +MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp.parent, false, true, false); +monitor_data_init (&hmp->parent, false, true, false);if (has_cpu_index) { -int ret =monitor_set_cpu (&hmp.parent, cpu_index); +int ret =monitor_set_cpu (&hmp->parent, cpu_index);if (ret <0 ) {error_setg (errp,QERR_INVALID_PARAMETER_VALUE ,"cpu-index" ,"a CPU number" );
@@ -179,14 +179,15 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index, } } -handle_hmp_command (&hmp, command_line); +handle_hmp_command (hmp, command_line); - WITH_QEMU_LOCK_GUARD(&hmp.parent.mon_lock) { - output =g_strdup (hmp.parent.outbuf->str); + WITH_QEMU_LOCK_GUARD(&hmp->parent.mon_lock) { + output =g_strdup (hmp->parent.outbuf->str); } out: -monitor_data_destroy (&hmp.parent); +monitor_data_destroy (&hmp->parent); +object_unref (hmp);return output; }
monitor/qmp.c +16 -2
@@ -71,6 +71,20 @@ typedef struct QMPRequest QMPRequest;QmpCommandList qmp_commands, qmp_cap_negotiation_commands; +OBJECT_DEFINE_TYPE (MonitorQMP, monitor_qmp,MONITOR_QMP ,MONITOR ); + +static void monitor_qmp_finalize (Object *obj) +{ +} + +static void monitor_qmp_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_qmp_init (Object *obj) +{ +} +static bool qmp_oob_enabled (MonitorQMP *mon) {return mon->capab[QMP_CAPABILITY_OOB ];
@@ -515,10 +529,10 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp) { -MonitorQMP *mon =g_new0 (MonitorQMP,1 ); +MonitorQMP *mon =MONITOR_QMP (object_new (TYPE_MONITOR_QMP ));if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) { -g_free (mon); +object_unref (mon);return ; }qemu_chr_fe_set_echo (&mon->parent.chr, true);
Signature · 1 line
2.53.0
Re: [PATCH 04/17] monitor: minimal conversion of monitors to QOM
Quoted 6 lines · * Daniel P. Berrangé ([email protected]) wrote:
This introduces a Monitor QOM object, with MonitorHMP and MonitorQMP subclasses. This is the bare minimum conversion of just the type declarations and replacing g_new/g_free with object_new/object_unref.
Signed-off-by Daniel P. Berrangé <[email protected]>
Looks OK, but I'm not that familiar with QOM, so just:
Quoted 245 lines
--- include/monitor/monitor.h | 11 ++++++++++- monitor/hmp.c | 18 ++++++++++++++++-- monitor/monitor-internal.h | 18 ++++++++++++++++-- monitor/monitor.c | 18 ++++++++++++++++-- monitor/qmp-cmds.c | 15 ++++++++------- monitor/qmp.c | 18 ++++++++++++++++-- 6 files changed, 82 insertions(+), 16 deletions(-)include/monitor/monitor.h +10
-1@@ -5,8 +5,17 @@#include "qapi/qapi-types-misc.h" #include "qemu/readline.h" #include "exec/hwaddr.h" +#include "qom/object.h" + +#define TYPE_MONITOR "monitor" +OBJECT_DECLARE_TYPE (Monitor, MonitorClass,MONITOR ); + +#define TYPE_MONITOR_HMP "monitor-hmp" +OBJECT_DECLARE_TYPE (MonitorHMP, MonitorHMPClass,MONITOR_HMP ); + +#define TYPE_MONITOR_QMP "monitor-qmp" +OBJECT_DECLARE_TYPE (MonitorQMP, MonitorQMPClass,MONITOR_QMP ); -typedef struct MonitorHMP MonitorHMP ;typedef struct MonitorOptions MonitorOptions ;#define QMP_REQ_QUEUE_LEN_MAX 8monitor/hmp.c +16
-2@@ -42,6 +42,20 @@#include "system/block-backend.h" #include "trace.h" +OBJECT_DEFINE_TYPE (MonitorHMP, monitor_hmp,MONITOR_HMP ,MONITOR ); + +static void monitor_hmp_finalize (Object *obj) +{ +} + +static void monitor_hmp_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_hmp_init (Object *obj) +{ +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {@@ -1518,10 +1532,10 @@ static void monitor_readline_flush(void *opaque)void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) { -MonitorHMP *mon =g_new0 (MonitorHMP,1 ); +MonitorHMP *mon =MONITOR_HMP (object_new (TYPE_MONITOR_HMP ));if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) { -g_free (mon); +object_unref (mon);return ; }monitor/monitor-internal.h +16
-2@@ -92,7 +92,13 @@ typedef struct HMPCommand {void (*command_completion)(ReadLineState *rs,int nb_args,const char *str); } HMPCommand; + +struct MonitorClass { +ObjectClass parent_class; +}; +struct Monitor { +Object parent;CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp;@@ -118,6 +124,10 @@ struct Monitor {int reset_seen; }; +struct MonitorHMPClass { +MonitorClass parent_class; +}; +struct MonitorHMP {Monitor parent;bool use_readline;@@ -131,7 +141,11 @@ struct MonitorHMP {ReadLineState *rs; }; -typedef struct { +struct MonitorQMPClass { +MonitorClass parent_class; +}; + +struct MonitorQMP {Monitor parent;JSONMessageParser parser;bool pretty;@@ -151,7 +165,7 @@ typedef struct {QemuMutex qmp_queue_lock;/* Input queue that holds all the parsed QMP requests */ GQueue *qmp_requests; -} MonitorQMP; +};/** * Is @mon a QMP monitor? monitor/monitor.c +16
-2@@ -73,6 +73,20 @@ static GHashTable *coroutine_mon; /* Maps Coroutine* to Monitor* */MonitorList mon_list;static bool monitor_destroyed; +OBJECT_DEFINE_TYPE (Monitor, monitor,MONITOR ,OBJECT ); + +static void monitor_finalize (Object *obj) +{ +} + +static void monitor_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_init (Object *obj) +{ +} +Monitor *monitor_cur (void ) {Monitor *mon;@@ -598,7 +612,7 @@ void monitor_list_append(Monitor *mon)if (mon) {monitor_data_destroy (mon); -g_free (mon); +object_unref (mon); } }@@ -680,7 +694,7 @@ void monitor_cleanup(void)monitor_flush (mon);monitor_data_destroy (mon);qemu_mutex_lock (&monitor_lock); -g_free (mon); +object_unref (mon); }qemu_mutex_unlock (&monitor_lock);monitor/qmp-cmds.c +8
-7@@ -166,12 +166,12 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index, int64_t cpu_index, Error **errp) { char *output = NULL; -MonitorHMP hmp = {}; +MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp.parent, false, true, false); +monitor_data_init (&hmp->parent, false, true, false);if (has_cpu_index) { -int ret =monitor_set_cpu (&hmp.parent, cpu_index); +int ret =monitor_set_cpu (&hmp->parent, cpu_index);if (ret <0 ) {error_setg (errp,QERR_INVALID_PARAMETER_VALUE ,"cpu-index" ,"a CPU number" );@@ -179,14 +179,15 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index, } } -handle_hmp_command (&hmp, command_line); +handle_hmp_command (hmp, command_line); - WITH_QEMU_LOCK_GUARD(&hmp.parent.mon_lock) { - output =g_strdup (hmp.parent.outbuf->str); + WITH_QEMU_LOCK_GUARD(&hmp->parent.mon_lock) { + output =g_strdup (hmp->parent.outbuf->str); } out: -monitor_data_destroy (&hmp.parent); +monitor_data_destroy (&hmp->parent); +object_unref (hmp);return output; }monitor/qmp.c +16
-2@@ -71,6 +71,20 @@ typedef struct QMPRequest QMPRequest;QmpCommandList qmp_commands, qmp_cap_negotiation_commands; +OBJECT_DEFINE_TYPE (MonitorQMP, monitor_qmp,MONITOR_QMP ,MONITOR ); + +static void monitor_qmp_finalize (Object *obj) +{ +} + +static void monitor_qmp_class_init (ObjectClass *cls,const void *data) +{ +} + +static void monitor_qmp_init (Object *obj) +{ +} +static bool qmp_oob_enabled (MonitorQMP *mon) {return mon->capab[QMP_CAPABILITY_OOB ];@@ -515,10 +529,10 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp) { -MonitorQMP *mon =g_new0 (MonitorQMP,1 ); +MonitorQMP *mon =MONITOR_QMP (object_new (TYPE_MONITOR_QMP ));if (!qemu_chr_fe_init (&mon->parent.chr, chr, errp)) { -g_free (mon); +object_unref (mon);return ; }qemu_chr_fe_set_echo (&mon->parent.chr, true);Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 5/17 monitor: remove 'skip_flush' field
In reply to Daniel P. BerrangéThe 'skip_flush' field is set on the dummy throwaway HMP monitor object created by QMP's 'human-monitor-command', as an indication not to try to write data to the chardev. Instead the QMP command impl will grab the data straight out of the in-memory buffer.
The flag is redundant, however, as the monitor code could instead simply check the 'fe_is_open' field on the CharFrontend, which will be false in the same scenarios that 'skip_flush' is true.
--- monitor/hmp.c | 2 +- monitor/monitor-internal.h | 4 +--- monitor/monitor.c | 11 +++++++---- monitor/qmp-cmds.c | 2 +- monitor/qmp.c | 2 +- 5 files changed, 11 insertions(+), 10 deletions(-)
monitor/hmp.c +1 -1
@@ -1539,7 +1539,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } -monitor_data_init (&mon->parent, false, false, false); +monitor_data_init (&mon->parent, false, false); mon->use_readline = use_readline;if (mon->use_readline) {
monitor/monitor-internal.h +1 -3
@@ -102,7 +102,6 @@ struct Monitor {CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp; -bool skip_flush;bool use_io_thread;char *mon_cpu_path;
@@ -183,8 +182,7 @@ extern QmpCommandList qmp_commands, qmp_cap_negotiation_commands;extern QemuMutex monitor_lock;extern MonitorList mon_list; -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread); +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread);void monitor_data_destroy (Monitor *mon);int monitor_can_read (void *opaque);void monitor_list_append (Monitor *mon);
monitor/monitor.c +7 -4
@@ -167,7 +167,12 @@ void monitor_flush_locked(Monitor *mon)size_t len;const char *buf; -if (mon->skip_flush) { +/* +* When used by QMP human-monitor-command, no chardev +* will be connected, as we want to just collect the +* output in the buffer +*/ +if (!mon->chr.fe_is_open) {return ; }
@@ -621,8 +626,7 @@ static void monitor_iothread_init(void) mon_iothread =iothread_create ("mon_iothread" , &error_abort); } -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread) +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread) {if (use_io_thread && !mon_iothread) {monitor_iothread_init ();
@@ -630,7 +634,6 @@ void monitor_data_init(Monitor *mon, bool is_qmp, bool skip_flush,qemu_mutex_init (&mon->mon_lock); mon->is_qmp = is_qmp; mon->outbuf =g_string_new (NULL ); - mon->skip_flush = skip_flush; mon->use_io_thread = use_io_thread; }
monitor/qmp-cmds.c +1 -1
@@ -168,7 +168,7 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp->parent, false, true, false); +monitor_data_init (&hmp->parent, false, false);if (has_cpu_index) {int ret =monitor_set_cpu (&hmp->parent, cpu_index);
monitor/qmp.c +1 -1
@@ -538,7 +538,7 @@ void monitor_new_qmp(Chardev *chr, bool pretty, Error **errp)qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->parent, true, false, +monitor_data_init (&mon->parent, true,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;
Signature · 1 line
2.53.0
Re: [PATCH 05/17] monitor: remove 'skip_flush' field
Quoted 8 lines · * Daniel P. Berrangé ([email protected]) wrote:
The '
skip_flush' field is set on the dummy throwaway HMP monitor object created by QMP's 'human-monitor-command', as an indication not to try to write data to the chardev. Instead the QMP command impl will grab the data straight out of the in-memory buffer.The flag is redundant, however, as the monitor code could instead simply check the '
fe_is_open' field on the CharFrontend, which will be false in the same scenarios that 'skip_flush' is true.
For monitors on sockets where the other end isn't connected, does that
change the behaviour? Does that also have !fe_is_open and can that hit this
case?
Dave
Quoted 109 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/hmp.c | 2 +- monitor/monitor-internal.h | 4 +--- monitor/monitor.c | 11 +++++++---- monitor/qmp-cmds.c | 2 +- monitor/qmp.c | 2 +- 5 files changed, 11 insertions(+), 10 deletions(-)monitor/hmp.c +1
-1@@ -1539,7 +1539,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } -monitor_data_init (&mon->parent, false, false, false); +monitor_data_init (&mon->parent, false, false); mon->use_readline = use_readline;if (mon->use_readline) {monitor/monitor-internal.h +1
-3@@ -102,7 +102,6 @@ struct Monitor {CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp; -bool skip_flush;bool use_io_thread;char *mon_cpu_path;@@ -183,8 +182,7 @@ extern QmpCommandList qmp_commands, qmp_cap_negotiation_commands;extern QemuMutex monitor_lock;extern MonitorList mon_list; -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread); +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread);void monitor_data_destroy (Monitor *mon);int monitor_can_read (void *opaque);void monitor_list_append (Monitor *mon);monitor/monitor.c +7
-4@@ -167,7 +167,12 @@ void monitor_flush_locked(Monitor *mon)size_t len;const char *buf; -if (mon->skip_flush) { +/* +* When used by QMP human-monitor-command, no chardev +* will be connected, as we want to just collect the +* output in the buffer +*/ +if (!mon->chr.fe_is_open) {return ; }@@ -621,8 +626,7 @@ static void monitor_iothread_init(void) mon_iothread =iothread_create ("mon_iothread" , &error_abort); } -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread) +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread) {if (use_io_thread && !mon_iothread) {monitor_iothread_init ();@@ -630,7 +634,6 @@ void monitor_data_init(Monitor *mon, bool is_qmp, bool skip_flush,qemu_mutex_init (&mon->mon_lock); mon->is_qmp = is_qmp; mon->outbuf =g_string_new (NULL ); - mon->skip_flush = skip_flush; mon->use_io_thread = use_io_thread; }monitor/qmp-cmds.c +1
-1@@ -168,7 +168,7 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp->parent, false, true, false); +monitor_data_init (&hmp->parent, false, false);if (has_cpu_index) {int ret =monitor_set_cpu (&hmp->parent, cpu_index);monitor/qmp.c +1
-1@@ -538,7 +538,7 @@ void monitor_new_qmp(Chardev *chr, bool pretty, Error **errp)qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->parent, true, false, +monitor_data_init (&mon->parent, true,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); mon->pretty = pretty;Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
Re: [PATCH 05/17] monitor: remove 'skip_flush' field
Quoted 6 lines · Dr. David Alan Gilbert
Quoted 5 lines · * Daniel P. Berrangé ([email protected]) wrote:
The '
skip_flush' field is set on the dummy throwaway HMP monitor object created by QMP's 'human-monitor-command', as an indication not to try to write data to the chardev. Instead the QMP command impl will grab the data straight out of the in-memory buffer.
Quoted 7 lines
Quoted 3 lines
The flag is redundant, however, as the monitor code could instead simply check the '
fe_is_open' field on the CharFrontend, which will be false in the same scenarios that 'skip_flush' is true.For monitors on sockets where the other end isn't connected, does that
change the behaviour? Does that also have !fe_is_open and can that hit this
case?
The only place that sets fe_is_open is qemu_chr_fe_set_open, which is called by qemu_chr_fe_set_handlers_full.
IOW, it merely reflects the fact that some frontend (the monitor in this case) and configured the chardev for use, and is separate from any notion of whether the chardev backend is open/connected.
Quoted 108 lines
Dave
Quoted 105 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/hmp.c | 2 +- monitor/monitor-internal.h | 4 +--- monitor/monitor.c | 11 +++++++---- monitor/qmp-cmds.c | 2 +- monitor/qmp.c | 2 +- 5 files changed, 11 insertions(+), 10 deletions(-)monitor/hmp.c +1
-1@@ -1539,7 +1539,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } -monitor_data_init (&mon->parent, false, false, false); +monitor_data_init (&mon->parent, false, false); mon->use_readline = use_readline;if (mon->use_readline) {monitor/monitor-internal.h +1
-3@@ -102,7 +102,6 @@ struct Monitor {CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp; -bool skip_flush;bool use_io_thread;char *mon_cpu_path;@@ -183,8 +182,7 @@ extern QmpCommandList qmp_commands, qmp_cap_negotiation_commands;extern QemuMutex monitor_lock;extern MonitorList mon_list; -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread); +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread);void monitor_data_destroy (Monitor *mon);int monitor_can_read (void *opaque);void monitor_list_append (Monitor *mon);monitor/monitor.c +7
-4@@ -167,7 +167,12 @@ void monitor_flush_locked(Monitor *mon)size_t len;const char *buf; -if (mon->skip_flush) { +/* +* When used by QMP human-monitor-command, no chardev +* will be connected, as we want to just collect the +* output in the buffer +*/ +if (!mon->chr.fe_is_open) {return ; }@@ -621,8 +626,7 @@ static void monitor_iothread_init(void) mon_iothread =iothread_create ("mon_iothread" , &error_abort); } -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread) +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread) {if (use_io_thread && !mon_iothread) {monitor_iothread_init ();@@ -630,7 +634,6 @@ void monitor_data_init(Monitor *mon, bool is_qmp, bool skip_flush,qemu_mutex_init (&mon->mon_lock); mon->is_qmp = is_qmp; mon->outbuf =g_string_new (NULL ); - mon->skip_flush = skip_flush; mon->use_io_thread = use_io_thread; }monitor/qmp-cmds.c +1
-1@@ -168,7 +168,7 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp->parent, false, true, false); +monitor_data_init (&hmp->parent, false, false);if (has_cpu_index) {int ret =monitor_set_cpu (&hmp->parent, cpu_index);monitor/qmp.c +1
-1@@ -538,7 +538,7 @@ void monitor_new_qmp(Chardev *chr, bool pretty, Error **errp)qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->parent, true, false, +monitor_data_init (&mon->parent, true,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT ));
Quoted 10 lines
Quoted 4 lines
monitor/qmp.c +0
-0mon->pretty = pretty;Signature · 1 line
2.53.0Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
With regards,
Daniel
Signature · 3 lines
|: https://berrange.com ~~ https://hachyderm.io/@berrange :| |: https://libvirt.org ~~ https://entangle-photo.org :| |: https://pixelfed.art/berrange ~~ https://fstop138.berrange.com :|
Dr. David Alan Gilbert
Reviewed-byRe: [PATCH 05/17] monitor: remove 'skip_flush' field
Quoted 15 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 6 lines · Dr. David Alan Gilbert
Quoted 5 lines · * Daniel P. Berrangé ([email protected]) wrote:
The '
skip_flush' field is set on the dummy throwaway HMP monitor object created by QMP's 'human-monitor-command', as an indication not to try to write data to the chardev. Instead the QMP command impl will grab the data straight out of the in-memory buffer.Quoted 7 lines
Quoted 3 lines
The flag is redundant, however, as the monitor code could instead simply check the '
fe_is_open' field on the CharFrontend, which will be false in the same scenarios that 'skip_flush' is true.For monitors on sockets where the other end isn't connected, does that
change the behaviour? Does that also have !fe_is_open and can that hit this
case?
Quoted 7 lines
The only place that sets
fe_is_openisqemu_chr_fe_set_open, which is called byqemu_chr_fe_set_handlers_full.IOW, it merely reflects the fact that some frontend (the monitor in this case) and configured the chardev for use, and is separate from any notion of whether the chardev backend is open/connected.
Ah ok, in which case,
Quoted 129 lines
Quoted 111 lines
Dave
Quoted 105 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- monitor/hmp.c | 2 +- monitor/monitor-internal.h | 4 +--- monitor/monitor.c | 11 +++++++---- monitor/qmp-cmds.c | 2 +- monitor/qmp.c | 2 +- 5 files changed, 11 insertions(+), 10 deletions(-)monitor/hmp.c +1
-1@@ -1539,7 +1539,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } -monitor_data_init (&mon->parent, false, false, false); +monitor_data_init (&mon->parent, false, false); mon->use_readline = use_readline;if (mon->use_readline) {monitor/monitor-internal.h +1
-3@@ -102,7 +102,6 @@ struct Monitor {CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool is_qmp; -bool skip_flush;bool use_io_thread;char *mon_cpu_path;@@ -183,8 +182,7 @@ extern QmpCommandList qmp_commands, qmp_cap_negotiation_commands;extern QemuMutex monitor_lock;extern MonitorList mon_list; -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread); +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread);void monitor_data_destroy (Monitor *mon);int monitor_can_read (void *opaque);void monitor_list_append (Monitor *mon);monitor/monitor.c +7
-4@@ -167,7 +167,12 @@ void monitor_flush_locked(Monitor *mon)size_t len;const char *buf; -if (mon->skip_flush) { +/* +* When used by QMP human-monitor-command, no chardev +* will be connected, as we want to just collect the +* output in the buffer +*/ +if (!mon->chr.fe_is_open) {return ; }@@ -621,8 +626,7 @@ static void monitor_iothread_init(void) mon_iothread =iothread_create ("mon_iothread" , &error_abort); } -void monitor_data_init (Monitor *mon,bool is_qmp,bool skip_flush, -bool use_io_thread) +void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread) {if (use_io_thread && !mon_iothread) {monitor_iothread_init ();@@ -630,7 +634,6 @@ void monitor_data_init(Monitor *mon, bool is_qmp, bool skip_flush,qemu_mutex_init (&mon->mon_lock); mon->is_qmp = is_qmp; mon->outbuf =g_string_new (NULL ); - mon->skip_flush = skip_flush; mon->use_io_thread = use_io_thread; }monitor/qmp-cmds.c +1
-1@@ -168,7 +168,7 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp->parent, false, true, false); +monitor_data_init (&hmp->parent, false, false);if (has_cpu_index) {int ret =monitor_set_cpu (&hmp->parent, cpu_index);monitor/qmp.c +1
-1@@ -538,7 +538,7 @@ void monitor_new_qmp(Chardev *chr, bool pretty, Error **errp)qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->parent, true, false, +monitor_data_init (&mon->parent, true,qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT ));Quoted 10 lines
Quoted 4 lines
monitor/qmp.c +0
-0mon->pretty = pretty;Signature · 1 line
2.53.0Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/With regards,
DanielSignature · 3 lines
|: https://berrange.com ~~ https://hachyderm.io/@berrange :| |: https://libvirt.org ~~ https://entangle-photo.org :| |: https://pixelfed.art/berrange ~~ https://fstop138.berrange.com :|
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 6/17 monitor: move monitor_data_(init|destroy) into QOM init/finalize
In reply to Daniel P. BerrangéStart to take advantage of QOM, by using object init and finalize methods to replace monitor_data_init and monitor_data_destroy.
A standalone helper is provided to enable the I/O thread for QMP where appropriate for the chardev backend.
--- monitor/hmp.c | 4 ++-- monitor/monitor-internal.h | 3 +-- monitor/monitor.c | 48 ++++++++++++++------------------------ monitor/qmp-cmds.c | 3 --- monitor/qmp.c | 21 +++++++++-------- 5 files changed, 32 insertions(+), 47 deletions(-)
monitor/hmp.c +2 -2
@@ -46,6 +46,8 @@ OBJECT_DEFINE_TYPE(MonitorHMP, monitor_hmp, MONITOR_HMP, MONITOR);static void monitor_hmp_finalize (Object *obj) { +MonitorHMP *mon =MONITOR_HMP (obj); +readline_free (mon->rs); }static void monitor_hmp_class_init (ObjectClass *cls,const void *data)
@@ -1539,8 +1541,6 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } -monitor_data_init (&mon->parent, false, false); - mon->use_readline = use_readline;if (mon->use_readline) { mon->rs = readline_init(monitor_readline_printf,
monitor/monitor-internal.h +1 -2
@@ -182,8 +182,7 @@ extern QmpCommandList qmp_commands, qmp_cap_negotiation_commands;extern QemuMutex monitor_lock;extern MonitorList mon_list; -void monitor_data_init (Monitor *mon,bool is_qmp,bool use_io_thread); -void monitor_data_destroy (Monitor *mon); +void monitor_iothread_init (Monitor *mon);int monitor_can_read (void *opaque);void monitor_list_append (Monitor *mon);void monitor_fdsets_cleanup (void );
monitor/monitor.c +18 -30
90 lines not on this page · raw message
monitor/qmp-cmds.c +0 -3
@@ -168,8 +168,6 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index,char *output =NULL ;MonitorHMP *hmp =MONITOR_HMP (object_new (TYPE_MONITOR_HMP )); -monitor_data_init (&hmp->parent, false, false); -if (has_cpu_index) {int ret =monitor_set_cpu (&hmp->parent, cpu_index);if (ret <0 ) {
@@ -186,7 +184,6 @@ char *qmp_human_monitor_command(const char *command_line, bool has_cpu_index, } out: -monitor_data_destroy (&hmp->parent);object_unref (hmp);return output; }
monitor/qmp.c +11 -10
@@ -73,8 +73,16 @@ QmpCommandList qmp_commands, qmp_cap_negotiation_commands;OBJECT_DEFINE_TYPE (MonitorQMP, monitor_qmp,MONITOR_QMP ,MONITOR ); +static void monitor_qmp_cleanup_req_queue_locked (MonitorQMP *mon); +static void monitor_qmp_finalize (Object *obj) { +MonitorQMP *mon =MONITOR_QMP (obj); + +json_message_parser_destroy (&mon->parser); +qemu_mutex_destroy (&mon->qmp_queue_lock); +monitor_qmp_cleanup_req_queue_locked (mon); +g_queue_free (mon->qmp_requests); }static void monitor_qmp_class_init (ObjectClass *cls,const void *data)
@@ -505,14 +513,6 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event) } } -void monitor_data_destroy_qmp (MonitorQMP *mon) -{ -json_message_parser_destroy (&mon->parser); -qemu_mutex_destroy (&mon->qmp_queue_lock); -monitor_qmp_cleanup_req_queue_locked (mon); -g_queue_free (mon->qmp_requests); -} -static void monitor_qmp_setup_handlers_bh (void *opaque) {MonitorQMP *mon = opaque;
@@ -538,8 +538,9 @@ void monitor_new_qmp(Chardev *chr, bool pretty, Error **errp)qemu_chr_fe_set_echo (&mon->parent.chr, true);/* Note: we run QMP monitor in I/O thread when @chr supports that */ -monitor_data_init (&mon->parent, true, -qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )); +if (qemu_chr_has_feature (chr,QEMU_CHAR_FEATURE_GCONTEXT )) { +monitor_iothread_init (&mon->parent); + } mon->pretty = pretty;
Signature · 1 line
2.53.0
PATCH 7/17 monitor: use class methods for monitor_vprintf
In reply to Daniel P. BerrangéThis removes the need for using monitor_is_qmp() to check the subclass type, which is an anti-pattern.
--- monitor/hmp.c | 12 ++++++++++++ monitor/monitor-internal.h | 3 +++ monitor/monitor.c | 11 ++++------- 3 files changed, 19 insertions(+), 7 deletions(-)
monitor/hmp.c +12 -0
@@ -50,14 +50,26 @@ static void monitor_hmp_finalize(Object *obj)readline_free (mon->rs); } +int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap) + G_GNUC_PRINTF(2, 0); +static void monitor_hmp_class_init (ObjectClass *cls,const void *data) { +MonitorClass *moncls =MONITOR_CLASS (cls); + + moncls->vprintf = monitor_hmp_vprintf; }static void monitor_hmp_init (Object *obj) { } +int monitor_hmp_vprintf (Monitor *mon,const char *fmt,va_list ap) +{ + g_autofree char *buf = g_strdup_vprintf(fmt, ap); +return monitor_puts (mon, buf); +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {
monitor/monitor-internal.h +3 -0
@@ -95,6 +95,9 @@ typedef struct HMPCommand {struct MonitorClass {ObjectClass parent_class; + + int (*vprintf)(Monitor *mon, const char *fmt, va_list ap) + G_GNUC_PRINTF(2, 0); };struct Monitor {
monitor/monitor.c +4 -7
@@ -243,21 +243,18 @@ int monitor_puts(Monitor *mon, const char *str)int monitor_vprintf (Monitor *mon,const char *fmt,va_list ap) { -char *buf; -int n; +MonitorClass *moncls;if (!mon) {return -1 ; } -if (monitor_is_qmp (mon)) { + moncls =MONITOR_GET_CLASS (mon); +if (!moncls->vprintf) {return -1 ; } - buf =g_strdup_vprintf (fmt, ap); - n =monitor_puts (mon, buf); -g_free (buf); -return n; +return moncls->vprintf (mon, fmt, ap); }int monitor_printf (Monitor *mon,const char *fmt, ...)
Signature · 1 line
2.53.0
Re: [PATCH 07/17] monitor: use class methods for monitor_vprintf
Quoted 4 lines · * Daniel P. Berrangé ([email protected]) wrote:
This removes the need for using
monitor_is_qmp()to check the subclass type, which is an anti-pattern.Signed-off-by Daniel P. Berrangé <[email protected]>
Quoted 84 lines
--- monitor/hmp.c | 12 ++++++++++++ monitor/monitor-internal.h | 3 +++ monitor/monitor.c | 11 ++++------- 3 files changed, 19 insertions(+), 7 deletions(-)monitor/hmp.c +12
-0@@ -50,14 +50,26 @@ static void monitor_hmp_finalize(Object *obj)readline_free (mon->rs); } +int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap) + G_GNUC_PRINTF(2, 0); +static void monitor_hmp_class_init (ObjectClass *cls,const void *data) { +MonitorClass *moncls =MONITOR_CLASS (cls); + + moncls->vprintf = monitor_hmp_vprintf; }static void monitor_hmp_init (Object *obj) { } +int monitor_hmp_vprintf (Monitor *mon,const char *fmt,va_list ap) +{ + g_autofree char *buf = g_strdup_vprintf(fmt, ap); +return monitor_puts (mon, buf); +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {monitor/monitor-internal.h +3
-0@@ -95,6 +95,9 @@ typedef struct HMPCommand {struct MonitorClass {ObjectClass parent_class; + + int (*vprintf)(Monitor *mon, const char *fmt, va_list ap) + G_GNUC_PRINTF(2, 0); };struct Monitor {monitor/monitor.c +4
-7@@ -243,21 +243,18 @@ int monitor_puts(Monitor *mon, const char *str)int monitor_vprintf (Monitor *mon,const char *fmt,va_list ap) { -char *buf; -int n; +MonitorClass *moncls;if (!mon) {return -1 ; } -if (monitor_is_qmp (mon)) { + moncls =MONITOR_GET_CLASS (mon); +if (!moncls->vprintf) {return -1 ; } - buf =g_strdup_vprintf (fmt, ap); - n =monitor_puts (mon, buf); -g_free (buf); -return n; +return moncls->vprintf (mon, fmt, ap); }int monitor_printf (Monitor *mon,const char *fmt, ...)Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 8/17 monitor: use class methods for monitor_qapi_event_emit
In reply to Daniel P. BerrangéThis removes the need for using monitor_is_qmp() to check the subclass type, which is an anti-pattern.
--- include/monitor/monitor.h | 1 + monitor/monitor-internal.h | 1 + monitor/monitor.c | 15 +++------------ monitor/qmp.c | 19 +++++++++++++++++++ 4 files changed, 24 insertions(+), 12 deletions(-)
include/monitor/monitor.h +1 -0
@@ -3,6 +3,7 @@#include "block/block.h" #include "qapi/qapi-types-misc.h" +#include "qapi/qapi-emit-events.h" #include "qemu/readline.h" #include "exec/hwaddr.h" #include "qom/object.h"
monitor/monitor-internal.h +1 -0
@@ -98,6 +98,7 @@ struct MonitorClass { int (*vprintf)(Monitor *mon, const char *fmt, va_list ap) G_GNUC_PRINTF(2, 0); +void (*emit_event)(Monitor *mon,QAPIEvent event,QDict *qdict); };struct Monitor {
monitor/monitor.c +3 -12
@@ -327,22 +327,13 @@ static inline QEMUClockType monitor_get_event_clock(void)static void monitor_qapi_event_emit (QAPIEvent event,QDict *qdict) {Monitor *mon; -MonitorQMP *qmp_mon;trace_monitor_protocol_event_emit (event, qdict); QTAILQ_FOREACH(mon, &mon_list, entry) { -if (!monitor_is_qmp (mon)) { -continue ; +MonitorClass *cls =MONITOR_GET_CLASS (mon); +if (cls->emit_event) { + cls->emit_event (mon, event, qdict); } - - qmp_mon =container_of (mon, MonitorQMP, parent); - { -QEMU_LOCK_GUARD (&mon->mon_lock); -if (qmp_mon->commands == &qmp_cap_negotiation_commands) { -continue ; - } - } -qmp_send_response (qmp_mon, qdict); } }
monitor/qmp.c +19 -0
@@ -85,14 +85,33 @@ static void monitor_qmp_finalize(Object *obj)g_queue_free (mon->qmp_requests); } +static void monitor_qmp_emit_event (Monitor *mon,QAPIEvent event,QDict *qdict); +static void monitor_qmp_class_init (ObjectClass *cls,const void *data) { +MonitorClass *moncls =MONITOR_CLASS (cls); + + moncls->emit_event = monitor_qmp_emit_event; }static void monitor_qmp_init (Object *obj) { } +static void monitor_qmp_emit_event (Monitor *mon,QAPIEvent event,QDict *qdict) +{ +MonitorQMP *qmp =MONITOR_QMP (mon); + + WITH_QEMU_LOCK_GUARD(&mon->mon_lock) { +if (qmp->commands == &qmp_cap_negotiation_commands) { +return ; + } + } + +qmp_send_response (qmp, qdict); +} + +static bool qmp_oob_enabled (MonitorQMP *mon) {return mon->capab[QMP_CAPABILITY_OOB ];
Signature · 1 line
2.53.0
PATCH 9/17 monitor: use class methods for monitor_accept_input
In reply to Daniel P. BerrangéThis removes the need for using monitor_is_qmp() to check the subclass type, which is an anti-pattern.
--- monitor/hmp.c | 16 ++++++++++++++++ monitor/monitor-internal.h | 1 + monitor/monitor.c | 12 +++--------- 3 files changed, 20 insertions(+), 9 deletions(-)
monitor/hmp.c +16 -0
@@ -52,12 +52,14 @@ static void monitor_hmp_finalize(Object *obj) int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap) G_GNUC_PRINTF(2, 0); +static void monitor_hmp_accept_input (Monitor *mon);static void monitor_hmp_class_init (ObjectClass *cls,const void *data) {MonitorClass *moncls =MONITOR_CLASS (cls); moncls->vprintf = monitor_hmp_vprintf; + moncls->accept_input = monitor_hmp_accept_input; }static void monitor_hmp_init (Object *obj)
@@ -70,6 +72,20 @@ int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap)return monitor_puts (mon, buf); } +static void monitor_hmp_accept_input (Monitor *mon) +{ +qemu_mutex_lock (&mon->mon_lock); +if (mon->reset_seen) { +MonitorHMP *hmp =MONITOR_HMP (mon); +assert (hmp->rs); +readline_restart (hmp->rs); +qemu_mutex_unlock (&mon->mon_lock); +readline_show_prompt (hmp->rs); + }else { +qemu_mutex_unlock (&mon->mon_lock); + } +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {
monitor/monitor-internal.h +1 -0
@@ -99,6 +99,7 @@ struct MonitorClass { int (*vprintf)(Monitor *mon, const char *fmt, va_list ap) G_GNUC_PRINTF(2, 0);void (*emit_event)(Monitor *mon,QAPIEvent event,QDict *qdict); +void (*accept_input)(Monitor *mon); };struct Monitor {
monitor/monitor.c +3 -9
@@ -557,16 +557,10 @@ int monitor_suspend(Monitor *mon)static void monitor_accept_input (void *opaque) {Monitor *mon = opaque; +MonitorClass *cls =MONITOR_GET_CLASS (mon); -qemu_mutex_lock (&mon->mon_lock); -if (!monitor_is_qmp (mon) && mon->reset_seen) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent); -assert (hmp_mon->rs); -readline_restart (hmp_mon->rs); -qemu_mutex_unlock (&mon->mon_lock); -readline_show_prompt (hmp_mon->rs); - }else { -qemu_mutex_unlock (&mon->mon_lock); +if (cls->accept_input) { + cls->accept_input (mon); }qemu_chr_fe_accept_input (&mon->chr);
Signature · 1 line
2.53.0
Re: [PATCH 09/17] monitor: use class methods for monitor_accept_input
Quoted 4 lines · * Daniel P. Berrangé ([email protected]) wrote:
This removes the need for using
monitor_is_qmp()to check the subclass type, which is an anti-pattern.Signed-off-by Daniel P. Berrangé <[email protected]>
Quoted 85 lines
--- monitor/hmp.c | 16 ++++++++++++++++ monitor/monitor-internal.h | 1 + monitor/monitor.c | 12 +++--------- 3 files changed, 20 insertions(+), 9 deletions(-)monitor/hmp.c +16
-0@@ -52,12 +52,14 @@ static void monitor_hmp_finalize(Object *obj) int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap) G_GNUC_PRINTF(2, 0); +static void monitor_hmp_accept_input (Monitor *mon);static void monitor_hmp_class_init (ObjectClass *cls,const void *data) {MonitorClass *moncls =MONITOR_CLASS (cls); moncls->vprintf = monitor_hmp_vprintf; + moncls->accept_input = monitor_hmp_accept_input; }static void monitor_hmp_init (Object *obj)@@ -70,6 +72,20 @@ int monitor_hmp_vprintf(Monitor *mon, const char *fmt, va_list ap)return monitor_puts (mon, buf); } +static void monitor_hmp_accept_input (Monitor *mon) +{ +qemu_mutex_lock (&mon->mon_lock); +if (mon->reset_seen) { +MonitorHMP *hmp =MONITOR_HMP (mon); +assert (hmp->rs); +readline_restart (hmp->rs); +qemu_mutex_unlock (&mon->mon_lock); +readline_show_prompt (hmp->rs); + }else { +qemu_mutex_unlock (&mon->mon_lock); + } +} +static void monitor_command_cb (void *opaque,const char *cmdline,void *readline_opaque) {monitor/monitor-internal.h +1
-0@@ -99,6 +99,7 @@ struct MonitorClass { int (*vprintf)(Monitor *mon, const char *fmt, va_list ap) G_GNUC_PRINTF(2, 0);void (*emit_event)(Monitor *mon,QAPIEvent event,QDict *qdict); +void (*accept_input)(Monitor *mon); };struct Monitor {monitor/monitor.c +3
-9@@ -557,16 +557,10 @@ int monitor_suspend(Monitor *mon)static void monitor_accept_input (void *opaque) {Monitor *mon = opaque; +MonitorClass *cls =MONITOR_GET_CLASS (mon); -qemu_mutex_lock (&mon->mon_lock); -if (!monitor_is_qmp (mon) && mon->reset_seen) { -MonitorHMP *hmp_mon =container_of (mon, MonitorHMP, parent); -assert (hmp_mon->rs); -readline_restart (hmp_mon->rs); -qemu_mutex_unlock (&mon->mon_lock); -readline_show_prompt (hmp_mon->rs); - }else { -qemu_mutex_unlock (&mon->mon_lock); +if (cls->accept_input) { + cls->accept_input (mon); }qemu_chr_fe_accept_input (&mon->chr);Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 10/17 monitor: use dynamic cast in monitor_qmp_requests_pop_any_with_lock
In reply to Daniel P. BerrangéThis eliminates a use of monitor_is_qmp() from the QMP coroutine dispatch path.
--- monitor/qmp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
monitor/qmp.c +3 -2
@@ -244,11 +244,12 @@ static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)MonitorQMP *qmp_mon; QTAILQ_FOREACH(mon, &mon_list, entry) { -if (!monitor_is_qmp (mon)) { + qmp_mon =MONITOR_QMP ( +object_dynamic_cast (OBJECT (mon),TYPE_MONITOR_QMP )); +if (!qmp_mon) {continue ; } - qmp_mon =container_of (mon, MonitorQMP, parent);qemu_mutex_lock (&qmp_mon->qmp_queue_lock); req_obj =g_queue_pop_head (qmp_mon->qmp_requests);if (req_obj) {
Signature · 1 line
2.53.0
PATCH 11/17 util: use dynamic cast in error vreport
In reply to Daniel P. BerrangéThis eliminates a use of monitor_is_qmp() from the error reporting path.
--- util/error-report.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
util/error-report.c +6 -7
@@ -223,16 +223,15 @@ char *real_time_iso8601(void) G_GNUC_PRINTF(2, 0)static void vreport (report_type type,const char *fmt,va_list ap) { -Monitor *cur =monitor_cur (); -gchar *timestr; -/* * When current monitor is QMP, messages must go to stderr -* and have prefixes added +* and have prefixes added, so we cast to HMP, leaving 'cur' +* as NULL in QMP case */ -if (monitor_cur_is_qmp ()) { - cur =NULL ; - } +Monitor *cur =MONITOR ( +object_dynamic_cast (OBJECT (monitor_cur ()),TYPE_MONITOR_HMP )); +gchar *timestr; +if (!cur) {qemu_flockfile (stderr); }
Signature · 1 line
2.53.0
PATCH 12/17 monitor: drop unused monitor_cur_is_qmp
In reply to Daniel P. BerrangéThe previous patch dropped the only remaining use of monitor_cur_is_qmp.
--- include/monitor/monitor.h | 1 - monitor/monitor.c | 10 ---------- stubs/monitor-core.c | 5 ----- tests/unit/test-util-sockets.c | 1 - 4 files changed, 17 deletions(-)
include/monitor/monitor.h +0 -1
@@ -25,7 +25,6 @@ extern QemuOptsList qemu_mon_opts;Monitor *monitor_cur (void );Monitor *monitor_set_cur (Coroutine *co,Monitor *mon); -bool monitor_cur_is_qmp (void );void monitor_init_globals (void );void monitor_init_globals_core (void );
monitor/monitor.c +0 -10
@@ -131,16 +131,6 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)return old_monitor; } -/** -* Is the current monitor, if any, a QMP monitor? -*/ -bool monitor_cur_is_qmp (void ) -{ -Monitor *cur_mon =monitor_cur (); - -return cur_mon &&monitor_is_qmp (cur_mon); -} -/** * Is @mon is using readline? * Note: not all HMP monitors use readline, e.g., gdbserver has a
stubs/monitor-core.c +0 -5
@@ -7,11 +7,6 @@ Monitor *monitor_cur(void)return NULL ; } -bool monitor_cur_is_qmp (void ) -{ -return false; -} -Monitor *monitor_set_cur (Coroutine *co,Monitor *mon) {return NULL ;
tests/unit/test-util-sockets.c +0 -1
@@ -74,7 +74,6 @@ int monitor_get_fd(Monitor *mon, const char *fdname, Error **errp)Monitor *monitor_cur (void ) {return cur_mon; }Monitor *monitor_set_cur (Coroutine *co,Monitor *mon) {abort (); }int monitor_vprintf (Monitor *mon,const char *fmt,va_list ap) {abort (); } -bool monitor_cur_is_qmp (void ) {abort (); };#ifndef _WIN32static void test_socket_fd_pass_name_good (void )
Signature · 1 line
2.53.0
PATCH 13/17 monitor: use dynamic cast in QMP commands
In reply to Daniel P. BerrangéRather than asserting monitor_is_qmp(), use a QOM cast via MONITOR_QMP which performs an assert already.
--- monitor/qmp-cmds-control.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
monitor/qmp-cmds-control.c +2 -10
@@ -72,11 +72,7 @@ static bool qmp_caps_accept(MonitorQMP *mon, QMPCapabilityList *list,void qmp_qmp_capabilities (bool has_enable,QMPCapabilityList *enable,Error **errp) { -Monitor *cur_mon =monitor_cur (); -MonitorQMP *mon; - -assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, parent); +MonitorQMP *mon =MONITOR_QMP (monitor_cur ());if (mon->commands == &qmp_commands) { error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
@@ -122,11 +118,7 @@ static void query_commands_cb(const QmpCommand *cmd, void *opaque)CommandInfoList *qmp_query_commands (Error **errp) {CommandInfoList *list =NULL ; -Monitor *cur_mon =monitor_cur (); -MonitorQMP *mon; - -assert (monitor_is_qmp (cur_mon)); - mon =container_of (cur_mon, MonitorQMP, parent); +MonitorQMP *mon =MONITOR_QMP (monitor_cur ());qmp_for_each_command (mon->commands, query_commands_cb, &list);
Signature · 1 line
2.53.0
PATCH 14/17 monitor: use dynamic cast in monitor_is_hmp_non_interactive
In reply to Daniel P. BerrangéRather than checking !monitor_is_qmp(), use a dynamic cast to check for HMP.
--- monitor/monitor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
monitor/monitor.c +1 -1
@@ -143,7 +143,7 @@ static inline bool monitor_uses_readline(const MonitorHMP *mon)static inline bool monitor_is_hmp_non_interactive (const Monitor *mon) { -if (monitor_is_qmp (mon)) { +if (!object_dynamic_cast (OBJECT (mon),TYPE_MONITOR_HMP )) {return false; }
Signature · 1 line
2.53.0
PATCH 15/17 monitor: drop unused monitor_is_qmp method
In reply to Daniel P. BerrangéThe previous patch dropped the only remaining use of monitor_is_qmp.
--- monitor/monitor-internal.h | 9 --------- monitor/monitor.c | 1 - 2 files changed, 10 deletions(-)
monitor/monitor-internal.h +0 -9
@@ -106,7 +106,6 @@ struct Monitor {Object parent;CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ -bool is_qmp;bool use_io_thread;char *mon_cpu_path;
@@ -171,14 +170,6 @@ struct MonitorQMP {GQueue *qmp_requests; }; -/** -* Is @mon a QMP monitor? -*/ -static inline bool monitor_is_qmp (const Monitor *mon) -{ -return mon->is_qmp; -} - typedef QTAILQ_HEAD(MonitorList, Monitor) MonitorList;extern IOThread *mon_iothread;extern Coroutine *qmp_dispatcher_co;
monitor/monitor.c +0 -1
@@ -94,7 +94,6 @@ static void monitor_init(Object *obj)Monitor *mon =MONITOR (obj);qemu_mutex_init (&mon->mon_lock); - mon->is_qmp = !!object_dynamic_cast (obj,TYPE_MONITOR_QMP ); mon->outbuf =g_string_new (NULL ); }
Signature · 1 line
2.53.0
PATCH 16/17 monitor: eliminate monitor_is_hmp_non_interactive method
In reply to Daniel P. BerrangéThe monitor_is_hmp_non_interactive method is used by monitor_suspend and monitor_resume, to make them a no-op if the HMP does not use readline.
There are only a handful of callers of suspend/resume and they can be made to skip the call with readline is not present.
--- include/monitor/monitor.h | 2 +- migration/migration-hmp-cmds.c | 5 ++++- monitor/hmp-cmds.c | 5 ++++- monitor/hmp.c | 14 +++++++++----- monitor/monitor-internal.h | 1 - monitor/monitor.c | 30 +----------------------------- 6 files changed, 19 insertions(+), 38 deletions(-)
include/monitor/monitor.h +1 -1
@@ -34,7 +34,7 @@ int monitor_new(MonitorOptions *opts, bool allow_hmp, Error **errp);int monitor_new_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void ); -int monitor_suspend (Monitor *mon); +void monitor_suspend (Monitor *mon);void monitor_resume (Monitor *mon);int monitor_get_fd (Monitor *mon,const char *fdname,Error **errp);
migration/migration-hmp-cmds.c +4 -1
@@ -18,6 +18,7 @@#include "migration/snapshot.h" #include "monitor/hmp.h" #include "monitor/monitor.h" +#include "monitor/monitor-internal.h" #include "qapi/error.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-visit-migration.h"
@@ -836,12 +837,14 @@ void hmp_migrate(Monitor *mon, const QDict *qdict)if (!detach) {HMPMigrationStatus *status; +MonitorHMP *hmp =MONITOR_HMP (mon); -if (monitor_suspend (mon) <0 ) { +if (!hmp->rs) {monitor_printf (mon,"terminal does not allow synchronous " "migration, continuing detached\n" );return ; } +monitor_suspend (mon); status =g_malloc0 (sizeof (*status)); status->mon = mon;
monitor/hmp-cmds.c +4 -1
@@ -90,7 +90,10 @@ void hmp_info_version(Monitor *mon, const QDict *qdict)void hmp_quit (Monitor *mon,const QDict *qdict) { -monitor_suspend (mon); +MonitorHMP *hmp =MONITOR_HMP (mon); +if (hmp->rs) { +monitor_suspend (mon); + }qmp_quit (NULL ); }
monitor/hmp.c +9 -5
@@ -1491,13 +1491,16 @@ static void monitor_read(void *opaque, const uint8_t *buf, int size)static void monitor_event (void *opaque,QEMUChrEvent event) {Monitor *mon = opaque; +MonitorHMP *hmp =MONITOR_HMP (mon);switch (event) {case CHR_EVENT_MUX_IN :qemu_mutex_lock (&mon->mon_lock);if (mon->mux_out) { mon->mux_out =0 ; -monitor_resume (mon); +if (hmp->rs) { +monitor_resume (mon); + } }qemu_mutex_unlock (&mon->mon_lock);break ;
@@ -1510,7 +1513,9 @@ static void monitor_event(void *opaque, QEMUChrEvent event) }else {monitor_flush_locked (mon); } -monitor_suspend (mon); +if (hmp->rs) { +monitor_suspend (mon); + } mon->mux_out =1 ; }qemu_mutex_unlock (&mon->mon_lock);
@@ -1521,7 +1526,7 @@ static void monitor_event(void *opaque, QEMUChrEvent event) "information\n", QEMU_VERSION);qemu_mutex_lock (&mon->mon_lock); mon->reset_seen =1 ; -if (!mon->mux_out) { +if (!mon->mux_out && hmp->rs) {/* Suspend-resume forces the prompt to be printed. */ monitor_suspend (mon);monitor_resume (mon);
@@ -1569,8 +1574,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } - mon->use_readline = use_readline; -if (mon->use_readline) { +if (use_readline) { mon->rs = readline_init(monitor_readline_printf, monitor_readline_flush, mon,
monitor/monitor-internal.h +0 -1
@@ -133,7 +133,6 @@ struct MonitorHMPClass {struct MonitorHMP {Monitor parent; -bool use_readline;/* * State used only in the thread "owning" the monitor. * If @use_io_thread, this is @mon_iothread. (This does not actually happen
monitor/monitor.c +1 -29
@@ -130,25 +130,6 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)return old_monitor; } -/** -* Is @mon is using readline? -* Note: not all HMP monitors use readline, e.g., gdbserver has a -* non-interactive HMP monitor, so readline is not used there. -*/ -static inline bool monitor_uses_readline (const MonitorHMP *mon) -{ -return mon->use_readline; -} - -static inline bool monitor_is_hmp_non_interactive (const Monitor *mon) -{ -if (!object_dynamic_cast (OBJECT (mon),TYPE_MONITOR_HMP )) { -return false; - } - -return !monitor_uses_readline (container_of (mon, MonitorHMP, parent)); -} -static gboolean monitor_unblocked (void *do_not_use,GIOCondition cond,void *opaque) {
@@ -523,12 +504,8 @@ static gboolean qapi_event_throttle_equal(const void *a, const void *b)return TRUE; } -int monitor_suspend (Monitor *mon) +void monitor_suspend (Monitor *mon) { -if (monitor_is_hmp_non_interactive (mon)) { -return -ENOTTY ; - } -qatomic_inc (&mon->suspend_cnt);if (mon->use_io_thread) {
@@ -540,7 +517,6 @@ int monitor_suspend(Monitor *mon) }trace_monitor_suspend (mon,1 ); -return 0 ; }static void monitor_accept_input (void *opaque)
@@ -557,10 +533,6 @@ static void monitor_accept_input(void *opaque)void monitor_resume (Monitor *mon) { -if (monitor_is_hmp_non_interactive (mon)) { -return ; - } -if (qatomic_dec_fetch (&mon->suspend_cnt) ==0 ) {AioContext *ctx;
Signature · 1 line
2.53.0
Re: [PATCH 16/17] monitor: eliminate monitor_is_hmp_non_interactive method
Quoted 9 lines · * Daniel P. Berrangé ([email protected]) wrote:
The
monitor_is_hmp_non_interactivemethod is used bymonitor_suspendandmonitor_resume, to make them a no-op if the HMP does not use readline.There are only a handful of callers of suspend/resume and they can be made to skip the call with readline is not present.
Signed-off-by Daniel P. Berrangé <[email protected]>
Quoted 196 lines
--- include/monitor/monitor.h | 2 +- migration/migration-hmp-cmds.c | 5 ++++- monitor/hmp-cmds.c | 5 ++++- monitor/hmp.c | 14 +++++++++----- monitor/monitor-internal.h | 1 - monitor/monitor.c | 30 +----------------------------- 6 files changed, 19 insertions(+), 38 deletions(-)include/monitor/monitor.h +1
-1@@ -34,7 +34,7 @@ int monitor_new(MonitorOptions *opts, bool allow_hmp, Error **errp);int monitor_new_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void ); -int monitor_suspend (Monitor *mon); +void monitor_suspend (Monitor *mon);void monitor_resume (Monitor *mon);int monitor_get_fd (Monitor *mon,const char *fdname,Error **errp);migration/migration-hmp-cmds.c +4
-1@@ -18,6 +18,7 @@#include "migration/snapshot.h" #include "monitor/hmp.h" #include "monitor/monitor.h" +#include "monitor/monitor-internal.h" #include "qapi/error.h" #include "qapi/qapi-commands-migration.h" #include "qapi/qapi-visit-migration.h" @@ -836,12 +837,14 @@ void hmp_migrate(Monitor *mon, const QDict *qdict)if (!detach) {HMPMigrationStatus *status; +MonitorHMP *hmp =MONITOR_HMP (mon); -if (monitor_suspend (mon) <0 ) { +if (!hmp->rs) {monitor_printf (mon,"terminal does not allow synchronous " "migration, continuing detached\n" );return ; } +monitor_suspend (mon); status =g_malloc0 (sizeof (*status)); status->mon = mon;monitor/hmp-cmds.c +4
-1@@ -90,7 +90,10 @@ void hmp_info_version(Monitor *mon, const QDict *qdict)void hmp_quit (Monitor *mon,const QDict *qdict) { -monitor_suspend (mon); +MonitorHMP *hmp =MONITOR_HMP (mon); +if (hmp->rs) { +monitor_suspend (mon); + }qmp_quit (NULL ); }monitor/hmp.c +9
-5@@ -1491,13 +1491,16 @@ static void monitor_read(void *opaque, const uint8_t *buf, int size)static void monitor_event (void *opaque,QEMUChrEvent event) {Monitor *mon = opaque; +MonitorHMP *hmp =MONITOR_HMP (mon);switch (event) {case CHR_EVENT_MUX_IN :qemu_mutex_lock (&mon->mon_lock);if (mon->mux_out) { mon->mux_out =0 ; -monitor_resume (mon); +if (hmp->rs) { +monitor_resume (mon); + } }qemu_mutex_unlock (&mon->mon_lock);break ;@@ -1510,7 +1513,9 @@ static void monitor_event(void *opaque, QEMUChrEvent event) }else {monitor_flush_locked (mon); } -monitor_suspend (mon); +if (hmp->rs) { +monitor_suspend (mon); + } mon->mux_out =1 ; }qemu_mutex_unlock (&mon->mon_lock);@@ -1521,7 +1526,7 @@ static void monitor_event(void *opaque, QEMUChrEvent event) "information\n", QEMU_VERSION);qemu_mutex_lock (&mon->mon_lock); mon->reset_seen =1 ; -if (!mon->mux_out) { +if (!mon->mux_out && hmp->rs) {/* Suspend-resume forces the prompt to be printed. */ monitor_suspend (mon);monitor_resume (mon);@@ -1569,8 +1574,7 @@ void monitor_new_hmp(Chardev *chr, bool use_readline, Error **errp)return ; } - mon->use_readline = use_readline; -if (mon->use_readline) { +if (use_readline) { mon->rs = readline_init(monitor_readline_printf, monitor_readline_flush, mon,monitor/monitor-internal.h +0
-1@@ -133,7 +133,6 @@ struct MonitorHMPClass {struct MonitorHMP {Monitor parent; -bool use_readline;/* * State used only in the thread "owning" the monitor. * If @use_io_thread, this is @mon_iothread. (This does not actually happen monitor/monitor.c +1
-29@@ -130,25 +130,6 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)return old_monitor; } -/** -* Is @mon is using readline? -* Note: not all HMP monitors use readline, e.g., gdbserver has a -* non-interactive HMP monitor, so readline is not used there. -*/ -static inline bool monitor_uses_readline (const MonitorHMP *mon) -{ -return mon->use_readline; -} - -static inline bool monitor_is_hmp_non_interactive (const Monitor *mon) -{ -if (!object_dynamic_cast (OBJECT (mon),TYPE_MONITOR_HMP )) { -return false; - } - -return !monitor_uses_readline (container_of (mon, MonitorHMP, parent)); -} -static gboolean monitor_unblocked (void *do_not_use,GIOCondition cond,void *opaque) {@@ -523,12 +504,8 @@ static gboolean qapi_event_throttle_equal(const void *a, const void *b)return TRUE; } -int monitor_suspend (Monitor *mon) +void monitor_suspend (Monitor *mon) { -if (monitor_is_hmp_non_interactive (mon)) { -return -ENOTTY ; - } -qatomic_inc (&mon->suspend_cnt);if (mon->use_io_thread) {@@ -540,7 +517,6 @@ int monitor_suspend(Monitor *mon) }trace_monitor_suspend (mon,1 ); -return 0 ; }static void monitor_accept_input (void *opaque)@@ -557,10 +533,6 @@ static void monitor_accept_input(void *opaque)void monitor_resume (Monitor *mon) { -if (monitor_is_hmp_non_interactive (mon)) { -return ; - } -if (qatomic_dec_fetch (&mon->suspend_cnt) ==0 ) {AioContext *ctx;Signature · 1 line
2.53.0
Signature · 4 lines
-----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
PATCH 17/17 FIXME: monitor: implement "user creatable" interface
In reply to Daniel P. BerrangéImplement the user creatable QOM interface and define the monitor-qmp and monitor-hmp types in QAPI. This unlocks the ability to create them on the command line with -object or in HMP/QMP with object_add.
For example:
$QEMU -chardev stdio,id=monchr0 -object monitor-hmp,id=mon0,chrdev=monchr0
FIXME: object_del is NOT safe on monitors yet. Resolve against Christian's patches for monitor deletion & synchronization.
--- chardev/char.c | 10 +++++- gdbstub/system.c | 10 ++++-- include/monitor/monitor.h | 2 -- monitor/hmp.c | 73 ++++++++++++++++++++++++++++++-------- monitor/monitor-internal.h | 2 ++ monitor/monitor.c | 70 +++++++++++++++++++++++++++++------- monitor/qmp.c | 47 ++++++++++++++++++------ qapi/qom.json | 43 ++++++++++++++++++++++ stubs/monitor-internal.c | 4 --- system/vl.c | 8 ++++- 10 files changed, 222 insertions(+), 47 deletions(-)
chardev/char.c +9 -1
@@ -785,8 +785,16 @@ static Chardev *qemu_chr_new_from_name(const char *label, const char *filename, }if (qemu_opt_get_bool (opts,"mux" ,0 )) { +const char *cdevid =qemu_opts_id (opts); +const char *monid =g_strdup_printf ("mon%s" , cdevid);assert (permit_mux_mon); -monitor_new_hmp (chr, true, &err); +object_new_with_props (TYPE_MONITOR_HMP , +object_get_objects_root (), + monid, + &err, +"chrdev" , cdevid, +"readline" ,"yes" , +NULL );if (err) {error_report_err (err);object_unparent (OBJECT (chr));
gdbstub/system.c +8 -2
@@ -386,9 +386,15 @@ bool gdbserver_start(const char *device, Error **errp)qemu_add_vm_change_state_handler (gdb_vm_state_change,NULL );/* Initialize a monitor terminal for gdb */ - mon_chr =qemu_chardev_new (NULL ,TYPE_CHARDEV_GDB , + mon_chr =qemu_chardev_new ("gdbchrdev0" ,TYPE_CHARDEV_GDB ,NULL ,NULL , &error_abort); -monitor_new_hmp (mon_chr, false, &error_abort); +object_new_with_props (TYPE_MONITOR_HMP , +object_get_objects_root (), +"gdbmon0" , + &error_abort, +"chrdev" ,"gdbchrdev0" , +"readline" ,"no" , +NULL ); }else {qemu_chr_fe_deinit (&gdbserver_system_state.chr, true); mon_chr = gdbserver_system_state.mon_chr;
include/monitor/monitor.h +0 -2
@@ -28,8 +28,6 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon);void monitor_init_globals (void );void monitor_init_globals_core (void ); -void monitor_new_qmp (Chardev *chr,bool pretty,Error **errp); -void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp);int monitor_new (MonitorOptions *opts,bool allow_hmp,Error **errp);int monitor_new_opts (QemuOpts *opts,Error **errp);void monitor_cleanup (void );
monitor/hmp.c +58 -15
106 lines not on this page · raw message
monitor/monitor-internal.h +2 -0
@@ -104,6 +104,7 @@ struct MonitorClass {struct Monitor {Object parent; +char *chrdev_id;CharFrontend chr;int suspend_cnt;/* Needs to be accessed atomically */ bool use_io_thread;
@@ -133,6 +134,7 @@ struct MonitorHMPClass {struct MonitorHMP {Monitor parent; +bool readline;/* * State used only in the thread "owning" the monitor. * If @use_io_thread, this is @mon_iothread. (This does not actually happen
monitor/monitor.c +58 -12
120 lines not on this page · raw message
monitor/qmp.c +37 -10
91 lines not on this page · raw message
qapi/qom.json +43 -0
61 lines not on this page · raw message
stubs/monitor-internal.c +0 -4
@@ -7,7 +7,3 @@ int monitor_get_fd(Monitor *mon, const char *name, Error **errp)error_setg (errp,"only QEMU supports file descriptor passing" );return -1 ; } - -void monitor_new_hmp (Chardev *chr,bool use_readline,Error **errp) -{ -}
system/vl.c +7 -1
@@ -1823,6 +1823,10 @@ static void object_option_add_visitor(Visitor *v) {ObjectOption *opt =g_new0 (ObjectOption,1 );visit_type_ObjectOptions (v,NULL , &opt->opts, &error_fatal); +if (opt->opts->qom_type ==OBJECT_TYPE_MONITOR_HMP || + opt->opts->qom_type ==OBJECT_TYPE_MONITOR_QMP ) { + default_monitor =0 ; + }QTAILQ_INSERT_TAIL (&object_opts, opt, next); }
@@ -1964,7 +1968,9 @@ static bool object_create_early(const char *type)/* Reason: property "chardev" */ if (g_str_equal (type,"rng-egd" ) || -g_str_equal (type,"qtest" )) { +g_str_equal (type,"qtest" ) || +g_str_equal (type,"monitor-hmp" ) || +g_str_equal (type,"monitor-qmp" )) {return false; }
Signature · 1 line
2.53.0
Quoted 4 lines · Daniel P. Berrangé
Conceptually -object and object_add/object_del should be sufficient for essentially all QEMU configuration....if only we ported all our internal custom backends/devices/etc to QOM. That is of course a big job which is why it hasn't happened.
In addition, we'd need a more unified object life cycle. See "Problem 5: QOM lacks a clear life cycle" in
Subject: Dynamic & heterogeneous machines, initial configuration: problems
Date: Wed, 31 Jan 2024 21:14:21 +0100
Message-ID: <[email protected]>
https://lore.kernel.org/qemu-devel/[email protected]/Quoted 5 lines
This series started with the premise that the monitor is one of the easier areas to convert since we have no more than three classes, a common base, and QMP and HMP subclasses. So why not give it a go and thus unlock the ability to dynamically create/delete monitors in QMP/HMP.
Makes sense.
Quoted 3 lines
This series does the conversion in as many small steps as I could achieve. At the end it is possible to create HMP and QMP monitors with -object and
object_add.
I'll try to squeeze in review.
Quoted 11 lines
In theory
object_delis possible but is unsafe since there's no synchronization wrt "in use" monitors. Christian Brauner sent a proposal for monitor_add/monitor_del commands that address the safety/synchronization issues, but I've not yet integrated the relevent bits of that series with this proposal:https://lists.nongnu.org/archive/html/qemu-devel/2026-04/msg01349.html
My overall feeling is that we're better off turning monitors into QOM classes, rather than inventing more type specific QMP commands.
I agree!
Quoted 5 lines
What's missing:
- Integration of code for safe deletion of monitors
- The existing -mon/-qmp/-monitor args should be turned into syntax sugar around -object & -chardev
Yes. A step we sometimes neglect.
Quoted 5 lines
- The new approach must be documented
- Functional tests are needed for the hot add/remove of monitors and new -object syntax. (The pre-existing test suites cover the static config with the traditional args).
Quoted 21 lines · Markus Armbruster
Quoted 4 lines · Daniel P. Berrangé
Conceptually -object and object_add/object_del should be sufficient for essentially all QEMU configuration....if only we ported all our internal custom backends/devices/etc to QOM. That is of course a big job which is why it hasn't happened.
In addition, we'd need a more unified object life cycle. See "Problem 5: QOM lacks a clear life cycle" in
Subject: Dynamic & heterogeneous machines, initial configuration: problems Date: Wed, 31 Jan 2024 21:14:21 +0100 Message-ID: <[email protected]> https://lore.kernel.org/qemu-devel/[email protected]/Quoted 5 lines
This series started with the premise that the monitor is one of the easier areas to convert since we have no more than three classes, a common base, and QMP and HMP subclasses. So why not give it a go and thus unlock the ability to dynamically create/delete monitors in QMP/HMP.
Quoted 7 lines
Makes sense.
Quoted 3 lines
This series does the conversion in as many small steps as I could achieve. At the end it is possible to create HMP and QMP monitors with -object and
object_add.I'll try to squeeze in review.
Don't review this v1 yet. I've got a v2 I'm finishing off to send real soon.