monitor: Remove need of per-target handlers
Subsystems (3)
v2 cover monitor: Remove need of per-target handlers
Changes needed for the single binary (and heterogeneous emulation).
Convert target_monitor_defs() and target_monitor_defs() to SysemuCPUOps fields, adapting the 4 targets using these 'legacy' code.
Instead of filtering the commands per target / device at build time, add a new field to HMPCommand to filter them at runtime, allowing to compile the command array once.
Philippe Mathieu-Daudé (27):
monitor: Have MonitorDef::get_value() always return int64_t type
monitor: Remove target_long use in get_monitor_def()
monitor: Reduce target-specific methods further
monitor: Remove 'monitor/hmp-target.h' header
monitor: Forward-declare the MonitorDef type
cpus: Introduce SysemuCPUOps::monitor_defs hook target/i386: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs target/m68k: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs target/sparc: Replace target_monitor_defs ->
SysemuCPUOps::monitor_defs
monitor: Remove target_monitor_defs()
cpus: Introduce SysemuCPUOps::monitor_get_register() hook target/riscv: Register target_get_monitor_def in SysemuCPUOps
monitor: Remove target_get_monitor_def()
monitor/meson: Use SPICE with migration HMP commands
stubs: Rename monitor* -> qmp* files
monitor: Make 'info via' a generic command
monitor: Make Xen emulation commands generic ones
system: Expose 'arch_init.h' as 'qemu/target-arch-defs.h'
monitor: Introduce HMPCommand::arch_bitmask field hw/s390x: Reduce 'monitor/monitor.h' inclusions
monitor: Do not check TARGET_S390X to build s390x commands
monitor: Do not check TARGET_I386 to build target/i386/ commands
monitor: Do not check TARGET_I386 to build 'info sgx' command
monitor: Do not check TARGET_I386 to build 'info sev' command
monitor: Do not check TARGET_I386/RISCV to build 'info mem' command
monitor: Do not check multiple TARGET_* to build 'info tlb' command
monitor: Merge hmp-target.c code within hmp-cmds.c
MAINTAINERS | 14 ++-
include/hw/core/sysemu-cpu-ops.h | 13 ++
include/hw/s390x/storage-attributes.h | 4 -
include/hw/s390x/storage-keys.h | 3 -
include/monitor/hmp-target.h | 46 -------
include/monitor/hmp.h | 21 ++++
.../qemu/base-arch-defs.h | 10 +-
include/qemu/typedefs.h | 1 +
monitor/monitor-internal.h | 7 +-
target/riscv/internals.h | 3 +
hw/i386/kvm/xen-stubs.c | 12 ++
hw/i386/sgx-hmp-stub.c | 16 +++
hw/i386/sgx-stub.c | 6 -
hw/i386/sgx.c | 1 -
hw/misc/mos6522-stub.c | 16 +++
hw/pci/pci.c | 2 +-
hw/s390x/s390-skeys.c | 2 +
hw/s390x/s390-stattrib.c | 2 +
monitor/hmp-cmds.c | 41 ++++++-
monitor/hmp-target.c | 115 ------------------
monitor/hmp.c | 53 +++++++-
stubs/hmp-cmd-info_mem.c | 12 ++
stubs/hmp-cmd-info_sev.c | 16 +++
stubs/hmp-cmd-info_tlb.c | 12 ++
stubs/hmp-cmds-hw-s390x.c | 15 +++
stubs/hmp-cmds-target-i386.c | 13 ++
stubs/{monitor-arm-gic.c => qmp-arm-gic.c} | 0
...or-cpu-s390x-kvm.c => qmp-cpu-s390x-kvm.c} | 0
.../{monitor-cpu-s390x.c => qmp-cpu-s390x.c} | 0
stubs/{monitor-cpu.c => qmp-cpu.c} | 0
stubs/{monitor-i386-rtc.c => qmp-i386-rtc.c} | 0
stubs/{monitor-i386-sev.c => qmp-i386-sev.c} | 0
stubs/{monitor-i386-sgx.c => qmp-i386-sgx.c} | 0
stubs/{monitor-i386-xen.c => qmp-i386-xen.c} | 0
stubs/target-get-monitor-def.c | 29 -----
stubs/target-monitor-defs.c | 7 --
system/arch_init.c | 2 +-
system/qdev-monitor.c | 2 +-
system/vl.c | 2 +-
target/i386/cpu-apic.c | 1 -
target/i386/cpu.c | 24 ++++
target/i386/monitor.c | 26 ----
target/i386/sev-system-stub.c | 6 -
target/i386/sev.c | 1 -
target/m68k/cpu.c | 18 +++
target/m68k/monitor.c | 22 ----
target/ppc/monitor.c | 2 -
target/riscv/cpu.c | 1 +
target/riscv/monitor.c | 5 +-
target/sh4/monitor.c | 1 -
target/sparc/cpu.c | 19 +++
target/sparc/monitor.c | 19 ---
target/xtensa/monitor.c | 1 -
hmp-commands-info.hx | 26 ++--
hmp-commands.hx | 13 +-
hw/i386/meson.build | 1 +
hw/misc/meson.build | 1 +
migration/meson.build | 2 +-
monitor/meson.build | 5 +-
stubs/meson.build | 23 ++--
60 files changed, 368 insertions(+), 347 deletions(-)
delete mode 100644 include/monitor/hmp-target.h
rename system/arch_init.h => include/qemu/base-arch-defs.h (92%)
create mode 100644 hw/i386/sgx-hmp-stub.c
create mode 100644 hw/misc/mos6522-stub.c
delete mode 100644 monitor/hmp-target.c
create mode 100644 stubs/hmp-cmd-info_mem.c
create mode 100644 stubs/hmp-cmd-info_sev.c
create mode 100644 stubs/hmp-cmd-info_tlb.c
create mode 100644 stubs/hmp-cmds-hw-s390x.c
create mode 100644 stubs/hmp-cmds-target-i386.c
rename stubs/{monitor-arm-gic.c => qmp-arm-gic.c} (100%)
rename stubs/{monitor-cpu-s390x-kvm.c => qmp-cpu-s390x-kvm.c} (100%)
rename stubs/{monitor-cpu-s390x.c => qmp-cpu-s390x.c} (100%)
rename stubs/{monitor-cpu.c => qmp-cpu.c} (100%)
rename stubs/{monitor-i386-rtc.c => qmp-i386-rtc.c} (100%)
rename stubs/{monitor-i386-sev.c => qmp-i386-sev.c} (100%)
rename stubs/{monitor-i386-sgx.c => qmp-i386-sgx.c} (100%)
rename stubs/{monitor-i386-xen.c => qmp-i386-xen.c} (100%)
delete mode 100644 stubs/target-get-monitor-def.c
delete mode 100644 stubs/target-monitor-defs.cSignature · 1 line
2.53.0
PATCH v2 1/27 monitor: Have MonitorDef::get_value() always return int64_t type
Simplify MonitorDef::get_value() handler by having it always return a int64_t type. Truncate to 32-bit in the single caller.
Note, this handler is only implemented once for the x86 targets.
--- include/monitor/hmp-target.h | 6 +----- monitor/hmp-target.c | 4 +++- target/i386/monitor.c | 4 ++-- 3 files changed, 6 insertions(+), 8 deletions(-)
include/monitor/hmp-target.h +1 -5
@@ -27,15 +27,11 @@typedef struct MonitorDef MonitorDef ; -#ifdef COMPILING_PER_TARGET -#include "exec/target_long.h" struct MonitorDef {const char *name;int offset; -target_long (*get_value)(Monitor *mon,const struct MonitorDef *md, -int val); +int64_t (*get_value)(Monitor *mon,const struct MonitorDef *md,int offset); }; -#endif const MonitorDef *target_monitor_defs (void );int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval);
monitor/hmp-target.c +3 -1
@@ -23,6 +23,7 @@*/ #include "qemu/osdep.h" +#include "qemu/target-info.h" #include "monitor-internal.h" #include "monitor/qdev.h" #include "net/slirp.h"
@@ -79,7 +80,8 @@ int get_monitor_def(Monitor *mon, int64_t *pval, const char *name)for (; md->name !=NULL ; md++) {if (hmp_compare_cmd (name, md->name)) {if (md->get_value) { - *pval = md->get_value (mon, md, md->offset); +int64_t val = md->get_value (mon, md, md->offset); + *pval =target_long_bits () ==32 ? (int32_t )val : val; }else {CPUArchState *env =mon_get_cpu_env (mon); ptr = (uint8_t *)env + md->offset;
target/i386/monitor.c +2 -2
@@ -593,8 +593,8 @@ void hmp_mce(Monitor *mon, const QDict *qdict) } } -static target_long monitor_get_pc (Monitor *mon,const struct MonitorDef *md, -int val) +static int64_t monitor_get_pc (Monitor *mon,const struct MonitorDef *md, +int offset) {CPUArchState *env =mon_get_cpu_env (mon);return env->eip + env->segs[R_CS ].base;
Signature · 1 line
2.53.0
Re: [PATCH v2 01/27] monitor: Have MonitorDef::get_value() always return int64_t type
Quoted 11 lines · Philippe Mathieu-Daudé
Simplify
MonitorDef::get_value()handler by having it always return aint64_ttype. Truncate to 32-bit in the single caller.Note, this handler is only implemented once for the x86 targets.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/monitor/hmp-target.h | 6 +----- monitor/hmp-target.c | 4 +++- target/i386/monitor.c | 4 ++-- 3 files changed, 6 insertions(+), 8 deletions(-)
Given there's only one use, we could just define that the hook itself extends.
target/i386/monitor.c void hmp_mce(Monitor *mon, const QDict *qdict) · line 600
Quoted 5 lines
target/i386/monitor.c +2
-0+static int64_t monitor_get_pc (Monitor *mon,const struct MonitorDef *md, +int offset) {CPUArchState *env =mon_get_cpu_env (mon);return env->eip + env->segs[R_CS ].base;
ret = env->eip + env->segs[R_CS].base;
if (!(env->hflags & HF_CS64_MASK)) {
ret = (int32_t)ret;
}The test will always be true for i386, but will also apply when the cpu is in 32-bit or 16-bit mode.
r~
PATCH v2 2/27 monitor: Remove target_long use in get_monitor_def()
In reply to Philippe Mathieu-DaudéTruncate manually, removing the need of target-specific code in get_monitor_def().
--- monitor/hmp-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
monitor/hmp-target.c +1 -1
@@ -93,7 +93,7 @@ int get_monitor_def(Monitor *mon, int64_t *pval, const char *name) ret =target_get_monitor_def (cs, name, &tmp);if (!ret) { - *pval = (target_long ) tmp; + *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; }return ret;
Signature · 1 line
2.53.0
Re: [PATCH v2 02/27] monitor: Remove target_long use in get_monitor_def()
Quoted 13 lines · Philippe Mathieu-Daudé
Truncate manually, removing the need of target-specific code in
get_monitor_def().Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- monitor/hmp-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)monitor/hmp-target.c +0
-0
monitor/hmp-target.c int get_monitor_def(Monitor *mon, int64_t *pval, const char *name) · line 97
Quoted 6 lines
monitor/hmp-target.c +1
-1@@ -93,7 +93,7 @@ int get_monitor_def(Monitor *mon, int64_t *pval, const char *name) ret =target_get_monitor_def (cs, name, &tmp);if (!ret) { - *pval = (target_long ) tmp; + *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; }
Likewise force the target to deal with int64_t.
There is only one user: riscv.
r~
PATCH v2 3/27 monitor: Reduce target-specific methods further
In reply to Philippe Mathieu-Daudéget_monitor_def() doesn't use any target-specific declaration anymore, move it to hmp.c to compile it once.
--- monitor/monitor-internal.h | 1 - monitor/hmp-target.c | 39 ------------------------------------- monitor/hmp.c | 40 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+), 40 deletions(-)
monitor/monitor-internal.h +0 -1
@@ -181,7 +181,6 @@ void monitor_data_destroy_qmp(MonitorQMP *mon); void coroutine_fn monitor_qmp_dispatcher_co(void *data);void qmp_dispatcher_co_wake (void ); -int get_monitor_def (Monitor *mon,int64_t *pval,const char *name);void handle_hmp_command (MonitorHMP *mon,const char *cmdline);int hmp_compare_cmd (const char *name,const char *list);
monitor/hmp-target.c +0 -39
@@ -23,7 +23,6 @@*/ #include "qemu/osdep.h" -#include "qemu/target-info.h" #include "monitor-internal.h" #include "monitor/qdev.h" #include "net/slirp.h"
@@ -61,44 +60,6 @@ HMPCommand *hmp_cmds_for_target(bool info_command)return info_command ? hmp_info_cmds : hmp_cmds; } -/* -* Set @pval to the value in the register identified by @name. -* return 0 if OK, -1 if not found -*/ -int get_monitor_def (Monitor *mon,int64_t *pval,const char *name) -{ -const MonitorDef *md =target_monitor_defs (); -CPUState *cs =mon_get_cpu (mon); -void *ptr; -uint64_t tmp =0 ; -int ret; - -if (cs ==NULL || md ==NULL ) { -return -1 ; - } - -for (; md->name !=NULL ; md++) { -if (hmp_compare_cmd (name, md->name)) { -if (md->get_value) { -int64_t val = md->get_value (mon, md, md->offset); - *pval =target_long_bits () ==32 ? (int32_t )val : val; - }else { -CPUArchState *env =mon_get_cpu_env (mon); - ptr = (uint8_t *)env + md->offset; - *pval = *(int32_t *)ptr; - } -return 0 ; - } - } - - ret =target_get_monitor_def (cs, name, &tmp); -if (!ret) { - *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; - } - -return ret; -} -static int compare_mon_cmd (const void *a,const void *b) {
monitor/hmp.c +40 -0
@@ -355,6 +355,8 @@ static bool gdb_get_register(Monitor *mon, int64_t *pval, const char *name)static const char *pch;static sigjmp_buf expr_env; +static int get_monitor_def (Monitor *mon,int64_t *pval,const char *name); + static G_NORETURN G_GNUC_PRINTF(2, 3) void expr_error(Monitor *mon, const char *fmt, ...) {
@@ -1595,3 +1597,41 @@ void monitor_register_hmp_info_hrt(const char *name, }g_assert_not_reached (); } + +/* +* Set @pval to the value in the register identified by @name. +* return 0 if OK, -1 if not found +*/ +static int get_monitor_def (Monitor *mon,int64_t *pval,const char *name) +{ +const MonitorDef *md =target_monitor_defs (); +CPUState *cs =mon_get_cpu (mon); +void *ptr; +uint64_t tmp =0 ; +int ret; + +if (cs ==NULL || md ==NULL ) { +return -1 ; + } + +for (; md->name !=NULL ; md++) { +if (hmp_compare_cmd (name, md->name)) { +if (md->get_value) { +int64_t val = md->get_value (mon, md, md->offset); + *pval =target_long_bits () ==32 ? (int32_t )val : val; + }else { +CPUArchState *env =mon_get_cpu_env (mon); + ptr = (uint8_t *)env + md->offset; + *pval = *(int32_t *)ptr; + } +return 0 ; + } + } + + ret =target_get_monitor_def (cs, name, &tmp); +if (!ret) { + *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; + } + +return ret; +}
Signature · 1 line
2.53.0
Re: [PATCH v2 03/27] monitor: Reduce target-specific methods further
Quoted 10 lines · Philippe Mathieu-Daudé
get_monitor_def()doesn't use any target-specific declaration anymore, move it tohmp.cto compile it once.Signed-off-by Philippe Mathieu-Daudé<[email protected]>Reviewed-by Dr. David Alan Gilbert<[email protected]>--- monitor/monitor-internal.h | 1 - monitor/hmp-target.c | 39 ------------------------------------- monitor/hmp.c | 40 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+), 40 deletions(-)
r~
PATCH v2 4/27 monitor: Remove 'monitor/hmp-target.h' header
In reply to Philippe Mathieu-DaudéThe "monitor/hmp-target.h" header doesn't contain any target-specific declarations anymore. Merge it with "monitor/hmp.h", its target-agnostic counterpart.
--- MAINTAINERS | 1 - include/monitor/hmp-target.h | 42 ----------------------------------- include/monitor/hmp.h | 12 ++++++++++ hw/i386/sgx-stub.c | 1 - hw/i386/sgx.c | 1 - monitor/hmp-cmds.c | 1 - monitor/hmp-target.c | 1 - monitor/hmp.c | 1 - stubs/target-monitor-defs.c | 2 +- target/i386/cpu-apic.c | 1 - target/i386/monitor.c | 1 - target/i386/sev-system-stub.c | 1 - target/i386/sev.c | 1 - target/m68k/monitor.c | 1 - target/ppc/monitor.c | 2 -- target/riscv/monitor.c | 1 - target/sh4/monitor.c | 1 - target/sparc/monitor.c | 1 - target/xtensa/monitor.c | 1 - 19 files changed, 13 insertions(+), 60 deletions(-) delete mode 100644 include/monitor/hmp-target.h
MAINTAINERS +0 -1
@@ -3411,7 +3411,6 @@ F: hmp.h F: hmp-commands*.hx F: include/monitor/hmp.h F: include/monitor/hmp-completion.h -F: include/monitor/hmp-target.h F: tests/qtest/test-hmp.c F: include/qemu/qemu-print.h F: util/qemu-print.c
include/monitor/hmp-target.h deleted +0 -42
42 lines not on this page · raw message
include/monitor/hmp.h +12 -0
@@ -17,6 +17,18 @@#include "qemu/readline.h" #include "qapi/qapi-types-common.h" +typedef struct MonitorDef { +const char *name; +int offset; +int64_t (*get_value)(Monitor *mon,const struct MonitorDef *md,int offset); +}MonitorDef ; + +const MonitorDef *target_monitor_defs (void ); +int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval); + +CPUArchState *mon_get_cpu_env (Monitor *mon); +CPUState *mon_get_cpu (Monitor *mon); +bool hmp_handle_error (Monitor *mon,Error *err);void hmp_help_cmd (Monitor *mon,const char *name);strList *hmp_split_at_comma (const char *str);
hw/i386/sgx-stub.c +0 -1
@@ -1,7 +1,6 @@#include "qemu/osdep.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "hw/i386/pc.h" #include "hw/i386/sgx-epc.h" #include "qapi/qapi-commands-misc-i386.h"
hw/i386/sgx.c +0 -1
@@ -17,7 +17,6 @@#include "monitor/qdev.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "qapi/qapi-commands-misc-i386.h"
monitor/hmp-cmds.c +0 -1
@@ -22,7 +22,6 @@#include "monitor/hmp.h" #include "qemu/help_option.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "monitor/monitor-internal.h" #include "qapi/error.h" #include "qapi/qapi-commands-control.h"
monitor/hmp-target.c +0 -1
@@ -27,7 +27,6 @@#include "monitor/qdev.h" #include "net/slirp.h" #include "system/device_tree.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h" #include "monitor/hmp-completion.h" #include "block/block-hmp-cmds.h"
monitor/hmp.c +0 -1
@@ -27,7 +27,6 @@#include "hw/core/qdev.h" #include "monitor-internal.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "qobject/qdict.h" #include "qobject/qnum.h" #include "qemu/bswap.h"
stubs/target-monitor-defs.c +1 -1
@@ -1,5 +1,5 @@#include "qemu/osdep.h" -#include "monitor/hmp-target.h" +#include "monitor/hmp.h" const MonitorDef *target_monitor_defs (void ) {
target/i386/cpu-apic.c +0 -1
@@ -11,7 +11,6 @@#include "qapi/error.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "system/hw_accel.h" #include "system/kvm.h" #include "system/xen.h"
target/i386/monitor.c +0 -1
@@ -25,7 +25,6 @@#include "qemu/osdep.h" #include "cpu.h" #include "monitor/monitor.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h" #include "qobject/qdict.h" #include "qapi/error.h"
target/i386/sev-system-stub.c +0 -1
@@ -14,7 +14,6 @@#include "qemu/osdep.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "qapi/error.h" #include "sev.h"
target/i386/sev.c +0 -1
@@ -39,7 +39,6 @@#include "qom/object.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "qapi/qapi-commands-misc-i386.h" #include "confidential-guest.h" #include "hw/i386/pc.h"
target/m68k/monitor.c +0 -1
@@ -8,7 +8,6 @@#include "qemu/osdep.h" #include "cpu.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "monitor/monitor.h" void hmp_info_tlb (Monitor *mon,const QDict *qdict)
target/ppc/monitor.c +0 -2
@@ -7,9 +7,7 @@*/ #include "qemu/osdep.h" -#include "qemu/ctype.h" #include "monitor/monitor.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h" #include "cpu.h"
target/riscv/monitor.c +0 -1
@@ -25,7 +25,6 @@#include "cpu_bits.h" #include "monitor/monitor.h" #include "monitor/hmp.h" -#include "monitor/hmp-target.h" #include "system/memory.h" #ifdef TARGET_RISCV64
target/sh4/monitor.c +0 -1
@@ -24,7 +24,6 @@#include "qemu/osdep.h" #include "cpu.h" #include "monitor/monitor.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h" static void print_tlb (Monitor *mon,int idx,tlb_t *tlb)
target/sparc/monitor.c +0 -1
@@ -24,7 +24,6 @@#include "qemu/osdep.h" #include "cpu.h" #include "monitor/monitor.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h"
target/xtensa/monitor.c +0 -1
@@ -24,7 +24,6 @@#include "qemu/osdep.h" #include "cpu.h" #include "monitor/monitor.h" -#include "monitor/hmp-target.h" #include "monitor/hmp.h" void hmp_info_tlb (Monitor *mon,const QDict *qdict)
Signature · 1 line
2.53.0
Re: [PATCH v2 04/27] monitor: Remove 'monitor/hmp-target.h' header
Quoted 27 lines · Philippe Mathieu-Daudé
he "
monitor/hmp-target.h" header doesn't contain any target-specific declarations anymore. Merge it with "monitor/hmp.h", its target-agnostic counterpart.Signed-off-by Philippe Mathieu-Daudé<[email protected]>Reviewed-by Dr. David Alan Gilbert<[email protected]>--- MAINTAINERS | 1 - include/monitor/hmp-target.h | 42 ----------------------------------- include/monitor/hmp.h | 12 ++++++++++ hw/i386/sgx-stub.c | 1 - hw/i386/sgx.c | 1 - monitor/hmp-cmds.c | 1 - monitor/hmp-target.c | 1 - monitor/hmp.c | 1 - stubs/target-monitor-defs.c | 2 +- target/i386/cpu-apic.c | 1 - target/i386/monitor.c | 1 - target/i386/sev-system-stub.c | 1 - target/i386/sev.c | 1 - target/m68k/monitor.c | 1 - target/ppc/monitor.c | 2 -- target/riscv/monitor.c | 1 - target/sh4/monitor.c | 1 - target/sparc/monitor.c | 1 - target/xtensa/monitor.c | 1 - 19 files changed, 13 insertions(+), 60 deletions(-)
Quoted 1 line
delete mode 100644
include/monitor/hmp-target.h
r~
PATCH v2 5/27 monitor: Forward-declare the MonitorDef type
In reply to Philippe Mathieu-DaudéRather than having core header forced to include "monitor/hmp.h" to get the MonitorDef type declaration, forward-declare it in "qemu/typedefs.h".
--- include/monitor/hmp.h | 6 +++--- include/qemu/typedefs.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-)
include/monitor/hmp.h +3 -3
@@ -17,11 +17,11 @@#include "qemu/readline.h" #include "qapi/qapi-types-common.h" -typedef struct MonitorDef { +struct MonitorDef {const char *name;int offset; -int64_t (*get_value)(Monitor *mon,const struct MonitorDef *md,int offset); -}MonitorDef ; +int64_t (*get_value)(Monitor *mon,const MonitorDef *md,int offset); +};const MonitorDef *target_monitor_defs (void );int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval);
include/qemu/typedefs.h +1 -0
@@ -72,6 +72,7 @@ typedef struct MemoryRegionSection MemoryRegionSection;typedef struct MigrationIncomingState MigrationIncomingState ;typedef struct MigrationState MigrationState ;typedef struct Monitor Monitor ; +typedef struct MonitorDef MonitorDef ;typedef struct MSIMessage MSIMessage ;typedef struct NetClientState NetClientState ;typedef struct NetFilterState NetFilterState ;
Signature · 1 line
2.53.0
Re: [PATCH v2 05/27] monitor: Forward-declare the MonitorDef type
Quoted 9 lines · Philippe Mathieu-Daudé
Rather than having core header forced to include "
monitor/hmp.h" to get the MonitorDef type declaration, forward-declare it in "qemu/typedefs.h".Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- include/monitor/hmp.h | 6 +++--- include/qemu/typedefs.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-)
r~
PATCH v2 6/27 cpus: Introduce SysemuCPUOps::monitor_defs hook
In reply to Philippe Mathieu-DaudéAllow targets to register their legacy target_monitor_defs() in SysemuCPUOps; check it first in get_monitor_def() otherwise fall back to previous per-target helper.
--- include/hw/core/sysemu-cpu-ops.h | 5 +++++ monitor/hmp.c | 9 +++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
include/hw/core/sysemu-cpu-ops.h +5 -0
@@ -85,6 +85,11 @@ typedef struct SysemuCPUOps {*/ bool (*internal_is_big_endian)(CPUState *cpu); +/** +* @monitor_defs: Array of MonitorDef entries. This field is legacy, +* use @gdb_core_xml_file to dump registers instead. +*/ +const MonitorDef *monitor_defs;/** * @legacy_vmsd: Legacy state for migration. * Do not use in new targets, use #DeviceClass::vmsd instead.
monitor/hmp.c +7 -2
@@ -25,6 +25,7 @@#include "qemu/osdep.h" #include <dirent.h> #include "hw/core/qdev.h" +#include "hw/core/sysemu-cpu-ops.h" #include "monitor-internal.h" #include "monitor/hmp.h" #include "qobject/qdict.h"
@@ -1603,13 +1604,17 @@ void monitor_register_hmp_info_hrt(const char *name,*/ static int get_monitor_def (Monitor *mon,int64_t *pval,const char *name) { -const MonitorDef *md =target_monitor_defs ();CPUState *cs =mon_get_cpu (mon); +const MonitorDef *md;void *ptr;uint64_t tmp =0 ;int ret; -if (cs ==NULL || md ==NULL ) { +if (cs ==NULL ) { +return -1 ; + } + md = cs->cc->sysemu_ops->monitor_defs ?:target_monitor_defs (); +if (md ==NULL ) {return -1 ; }
Signature · 1 line
2.53.0
Re: [PATCH v2 06/27] cpus: Introduce SysemuCPUOps::monitor_defs hook
Quoted 9 lines · Philippe Mathieu-Daudé
Allow targets to register their legacy
target_monitor_defs()in SysemuCPUOps; check it first inget_monitor_def()otherwise fall back to previous per-target helper.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/hw/core/sysemu-cpu-ops.h | 5 +++++ monitor/hmp.c | 9 +++++++-- 2 files changed, 12 insertions(+), 2 deletions(-)
r~
PATCH v2 7/27 target/i386: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
In reply to Philippe Mathieu-DaudéRestrict x86_monitor_defs[] to cpu.c, register it as SysemuCPUOps::monitor_defs hook, allowing to remove the target_monitor_defs() method.
--- target/i386/cpu.c | 24 ++++++++++++++++++++++++ target/i386/monitor.c | 25 ------------------------- 2 files changed, 24 insertions(+), 25 deletions(-)
target/i386/cpu.c +24 -0
@@ -39,6 +39,7 @@#include "exec/watchpoint.h" #ifndef CONFIG_USER_ONLY #include "confidential-guest.h" +#include "monitor/hmp.h" #include "system/reset.h" #include "qapi/qapi-commands-machine.h" #include "system/address-spaces.h"
@@ -10685,6 +10686,28 @@ static const Property x86_cpu_properties[] = { };#ifndef CONFIG_USER_ONLY + +static int64_t monitor_get_pc (Monitor *mon,const struct MonitorDef *md, +int offset) +{ +CPUArchState *env =mon_get_cpu_env (mon); +return env->eip + env->segs[R_CS ].base; +} + +static const MonitorDef x86_monitor_defs[] = { +#define SEG(name, seg) \ + { name ".limit", offsetof(CPUX86State, segs[seg].limit) }, + SEG("cs", R_CS) + SEG("ds", R_DS) + SEG("es", R_ES) + SEG("ss", R_SS) + SEG("fs", R_FS) + SEG("gs", R_GS) + {"pc" ,0 , monitor_get_pc, }, + {NULL }, +#undef SEG +}; +#include "hw/core/sysemu-cpu-ops.h" static const struct SysemuCPUOps i386_sysemu_ops = {
@@ -10698,6 +10721,7 @@ static const struct SysemuCPUOps i386_sysemu_ops = { .write_elf64_note = x86_cpu_write_elf64_note, .write_elf32_qemunote = x86_cpu_write_elf32_qemunote, .write_elf64_qemunote = x86_cpu_write_elf64_qemunote, + .monitor_defs = x86_monitor_defs, .legacy_vmsd = &vmstate_x86_cpu, };#endif
target/i386/monitor.c +0 -25
@@ -591,28 +591,3 @@ void hmp_mce(Monitor *mon, const QDict *qdict) flags); } } - -static int64_t monitor_get_pc (Monitor *mon,const struct MonitorDef *md, -int offset) -{ -CPUArchState *env =mon_get_cpu_env (mon); -return env->eip + env->segs[R_CS ].base; -} - -const MonitorDef monitor_defs[] = { -#define SEG(name, seg) \ - { name ".limit", offsetof(CPUX86State, segs[seg].limit) }, - SEG("cs", R_CS) - SEG("ds", R_DS) - SEG("es", R_ES) - SEG("ss", R_SS) - SEG("fs", R_FS) - SEG("gs", R_GS) - {"pc" ,0 , monitor_get_pc, }, - {NULL }, -}; - -const MonitorDef *target_monitor_defs (void ) -{ -return monitor_defs; -}
Signature · 1 line
2.53.0
Re: [PATCH v2 07/27] target/i386: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
Quoted 9 lines · Philippe Mathieu-Daudé
Restrict x86_monitor_defs[] to
cpu.c, register it asSysemuCPUOps::monitor_defshook, allowing to remove thetarget_monitor_defs()method.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- target/i386/cpu.c | 24 ++++++++++++++++++++++++ target/i386/monitor.c | 25 ------------------------- 2 files changed, 24 insertions(+), 25 deletions(-)
r~
PATCH v2 8/27 target/m68k: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
In reply to Philippe Mathieu-DaudéRestrict m68k_monitor_defs[] to cpu.c, register it as SysemuCPUOps::monitor_defs hook, allowing to remove the target_monitor_defs() method.
--- target/m68k/cpu.c | 18 ++++++++++++++++++ target/m68k/monitor.c | 21 --------------------- 2 files changed, 18 insertions(+), 21 deletions(-)
target/m68k/cpu.c +18 -0
@@ -25,6 +25,7 @@#ifndef CONFIG_USER_ONLY #include "migration/vmstate.h" +#include "monitor/hmp.h" #endif #include "cpu.h"
@@ -602,11 +603,28 @@ static const VMStateDescription vmstate_m68k_cpu = { }, }; +static const MonitorDef m68k_monitor_defs[] = { + { "ssp", offsetof(CPUM68KState, sp[0]) }, + { "usp", offsetof(CPUM68KState, sp[1]) }, + { "isp", offsetof(CPUM68KState, sp[2]) }, + {"sfc" , offsetof(CPUM68KState , sfc) }, + {"dfc" , offsetof(CPUM68KState , dfc) }, + { "urp", offsetof(CPUM68KState, mmu.urp) }, + { "srp", offsetof(CPUM68KState, mmu.srp) }, + { "dttr0", offsetof(CPUM68KState, mmu.ttr[M68K_DTTR0]) }, + { "dttr1", offsetof(CPUM68KState, mmu.ttr[M68K_DTTR1]) }, + { "ittr0", offsetof(CPUM68KState, mmu.ttr[M68K_ITTR0]) }, + { "ittr1", offsetof(CPUM68KState, mmu.ttr[M68K_ITTR1]) }, + { "mmusr", offsetof(CPUM68KState, mmu.mmusr) }, + {NULL }, +}; +#include "hw/core/sysemu-cpu-ops.h" static const struct SysemuCPUOps m68k_sysemu_ops = { .has_work = m68k_cpu_has_work, .get_phys_page_debug = m68k_cpu_get_phys_page_debug, + .monitor_defs = m68k_monitor_defs, };#endif /* !CONFIG_USER_ONLY */
target/m68k/monitor.c +0 -21
@@ -21,24 +21,3 @@ void hmp_info_tlb(Monitor *mon, const QDict *qdict)dump_mmu (env1); } - -static const MonitorDef monitor_defs[] = { - { "ssp", offsetof(CPUM68KState, sp[0]) }, - { "usp", offsetof(CPUM68KState, sp[1]) }, - { "isp", offsetof(CPUM68KState, sp[2]) }, - {"sfc" , offsetof(CPUM68KState , sfc) }, - {"dfc" , offsetof(CPUM68KState , dfc) }, - { "urp", offsetof(CPUM68KState, mmu.urp) }, - { "srp", offsetof(CPUM68KState, mmu.srp) }, - { "dttr0", offsetof(CPUM68KState, mmu.ttr[M68K_DTTR0]) }, - { "dttr1", offsetof(CPUM68KState, mmu.ttr[M68K_DTTR1]) }, - { "ittr0", offsetof(CPUM68KState, mmu.ttr[M68K_ITTR0]) }, - { "ittr1", offsetof(CPUM68KState, mmu.ttr[M68K_ITTR1]) }, - { "mmusr", offsetof(CPUM68KState, mmu.mmusr) }, - {NULL }, -}; - -const MonitorDef *target_monitor_defs (void ) -{ -return monitor_defs; -}
Signature · 1 line
2.53.0
Re: [PATCH v2 08/27] target/m68k: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
Quoted 9 lines · Philippe Mathieu-Daudé
Restrict m68k_monitor_defs[] to
cpu.c, register it asSysemuCPUOps::monitor_defshook, allowing to remove thetarget_monitor_defs()method.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- target/m68k/cpu.c | 18 ++++++++++++++++++ target/m68k/monitor.c | 21 --------------------- 2 files changed, 18 insertions(+), 21 deletions(-)
r~
PATCH v2 9/27 target/sparc: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
In reply to Philippe Mathieu-DaudéRestrict sparc64_monitor_defs[] to cpu.c, register it as SysemuCPUOps::monitor_defs hook (taking care to not register it on 32-bit SPARC target), allowing to remove the target_monitor_defs() method.
--- target/sparc/cpu.c | 19 +++++++++++++++++++ target/sparc/monitor.c | 18 ------------------ 2 files changed, 19 insertions(+), 18 deletions(-)
target/sparc/cpu.c +19 -0
@@ -993,12 +993,31 @@ static const Property sparc_cpu_properties[] = { };#ifndef CONFIG_USER_ONLY + +#ifdef TARGET_SPARC64 +#include "monitor/hmp.h" + +static const MonitorDef sparc64_monitor_defs[] = { + {"asi" , offsetof(CPUSPARCState , asi) }, + {"pstate" , offsetof(CPUSPARCState , pstate) }, + {"cansave" , offsetof(CPUSPARCState , cansave) }, + {"canrestore" , offsetof(CPUSPARCState , canrestore) }, + {"otherwin" , offsetof(CPUSPARCState , otherwin) }, + {"wstate" , offsetof(CPUSPARCState , wstate) }, + {"cleanwin" , offsetof(CPUSPARCState , cleanwin) }, + {NULL }, +}; +#endif +#include "hw/core/sysemu-cpu-ops.h" static const struct SysemuCPUOps sparc_sysemu_ops = { .has_work = sparc_cpu_has_work, .get_phys_page_debug = sparc_cpu_get_phys_page_debug, .legacy_vmsd = &vmstate_sparc_cpu, +#if defined(TARGET_SPARC64) + .monitor_defs = sparc64_monitor_defs, +#endif };#endif
target/sparc/monitor.c +0 -18
@@ -37,21 +37,3 @@ void hmp_info_tlb(Monitor *mon, const QDict *qdict) }dump_mmu (env1); } - -const MonitorDef monitor_defs[] = { -#ifdef TARGET_SPARC64 - { "asi", offsetof(CPUSPARCState, asi) }, - { "pstate", offsetof(CPUSPARCState, pstate) }, - { "cansave", offsetof(CPUSPARCState, cansave) }, - { "canrestore", offsetof(CPUSPARCState, canrestore) }, - { "otherwin", offsetof(CPUSPARCState, otherwin) }, - { "wstate", offsetof(CPUSPARCState, wstate) }, - { "cleanwin", offsetof(CPUSPARCState, cleanwin) }, -#endif - { NULL }, -}; - -const MonitorDef *target_monitor_defs(void) -{ - return monitor_defs; -}
Signature · 1 line
2.53.0
Re: [PATCH v2 09/27] target/sparc: Replace target_monitor_defs -> SysemuCPUOps::monitor_defs
Quoted 10 lines · Philippe Mathieu-Daudé
Restrict sparc64_monitor_defs[] to
cpu.c, register itasSysemuCPUOps::monitor_defshook (taking care to not register it on 32-bit SPARC target), allowing to remove thetarget_monitor_defs()method.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- target/sparc/cpu.c | 19 +++++++++++++++++++ target/sparc/monitor.c | 18 ------------------ 2 files changed, 19 insertions(+), 18 deletions(-)
r~
PATCH v2 10/27 monitor: Remove target_monitor_defs()
In reply to Philippe Mathieu-Daudétarget_monitor_defs() is now only a dead stub. Remove as pointless.
--- include/monitor/hmp.h | 1 - monitor/hmp.c | 2 +- stubs/target-monitor-defs.c | 7 ------- stubs/meson.build | 1 - 4 files changed, 1 insertion(+), 10 deletions(-) delete mode 100644 stubs/target-monitor-defs.c
include/monitor/hmp.h +0 -1
@@ -23,7 +23,6 @@ struct MonitorDef {int64_t (*get_value)(Monitor *mon,const MonitorDef *md,int offset); }; -const MonitorDef *target_monitor_defs (void );int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval);CPUArchState *mon_get_cpu_env (Monitor *mon);
monitor/hmp.c +1 -1
@@ -1613,7 +1613,7 @@ static int get_monitor_def(Monitor *mon, int64_t *pval, const char *name)if (cs ==NULL ) {return -1 ; } - md = cs->cc->sysemu_ops->monitor_defs ?:target_monitor_defs (); + md = cs->cc->sysemu_ops->monitor_defs;if (md ==NULL ) {return -1 ; }
stubs/target-monitor-defs.c deleted +0 -7
@@ -1,7 +0,0 @@ -#include "qemu/osdep.h" -#include "monitor/hmp.h" - -const MonitorDef *target_monitor_defs (void ) -{ -return NULL ; -}
stubs/meson.build +0 -1
@@ -75,7 +75,6 @@ if have_system endif stub_ss.add(files('kvm.c')) stub_ss.add(files('target-get-monitor-def.c')) - stub_ss.add(files('target-monitor-defs.c')) stub_ss.add(files('win32-kbd-hook.c')) stub_ss.add(files('xen-hw-stub.c')) stub_ss.add(files('monitor-arm-gic.c'))
Signature · 1 line
2.53.0
Re: [PATCH v2 10/27] monitor: Remove target_monitor_defs()
Quoted 10 lines · Philippe Mathieu-Daudé
target_monitor_defs()is now only a dead stub. Remove as pointless.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- include/monitor/hmp.h | 1 - monitor/hmp.c | 2 +- stubs/target-monitor-defs.c | 7 ------- stubs/meson.build | 1 - 4 files changed, 1 insertion(+), 10 deletions(-)delete mode 100644
stubs/target-monitor-defs.c
r~
PATCH v2 11/27 cpus: Introduce SysemuCPUOps::monitor_get_register() hook
In reply to Philippe Mathieu-DaudéAllow targets to register their legacy target_get_monitor_def() in SysemuCPUOps; check it first in get_monitor_def() otherwise fall back to previous per-target helper.
--- include/hw/core/sysemu-cpu-ops.h | 8 ++++++++ monitor/hmp.c | 6 +++++- 2 files changed, 13 insertions(+), 1 deletion(-)
include/hw/core/sysemu-cpu-ops.h +8 -0
@@ -85,11 +85,19 @@ typedef struct SysemuCPUOps {*/ bool (*internal_is_big_endian)(CPUState *cpu); +/** +* @monitor_get_register: Callback to fill @pval with register @name. +* This field is legacy, use @gdb_core_xml_file +* to dump registers instead. +*/ +int (*monitor_get_register)(CPUState *cs,const char *name,uint64_t *pval); +/** * @monitor_defs: Array of MonitorDef entries. This field is legacy, * use @gdb_core_xml_file to dump registers instead. */ const MonitorDef *monitor_defs; +/** * @legacy_vmsd: Legacy state for migration. * Do not use in new targets, use #DeviceClass::vmsd instead.
monitor/hmp.c +5 -1
@@ -1632,7 +1632,11 @@ static int get_monitor_def(Monitor *mon, int64_t *pval, const char *name) } } - ret =target_get_monitor_def (cs, name, &tmp); +if (cs->cc->sysemu_ops->monitor_get_register) { + ret = cs->cc->sysemu_ops->monitor_get_register (cs, name, &tmp); + }else { + ret =target_get_monitor_def (cs, name, &tmp); + }if (!ret) { *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; }
Signature · 1 line
2.53.0
Re: [PATCH v2 11/27] cpus: Introduce SysemuCPUOps::monitor_get_register() hook
Quoted 9 lines · Philippe Mathieu-Daudé
Allow targets to register their legacy
target_get_monitor_def()in SysemuCPUOps; check it first inget_monitor_def()otherwise fall back to previous per-target helper.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/hw/core/sysemu-cpu-ops.h | 8 ++++++++ monitor/hmp.c | 6 +++++- 2 files changed, 13 insertions(+), 1 deletion(-)
r~
PATCH v2 12/27 target/riscv: Register target_get_monitor_def in SysemuCPUOps
In reply to Philippe Mathieu-DaudéRename target_get_monitor_def() as riscv_monitor_get_register_legacy() and register it as SysemuCPUOps::monitor_get_register() handler.
--- target/riscv/internals.h | 3 +++ target/riscv/cpu.c | 1 + target/riscv/monitor.c | 4 +++- 3 files changed, 7 insertions(+), 1 deletion(-)
target/riscv/internals.h +3 -0
@@ -233,4 +233,7 @@ static inline int insn_len(uint16_t first_word) return (first_word & 3) == 3 ? 4 : 2; } +int riscv_monitor_get_register_legacy (CPUState *cs,const char *name, +uint64_t *pval); +#endif
target/riscv/cpu.c +1 -0
@@ -2720,6 +2720,7 @@ static const struct SysemuCPUOps riscv_sysemu_ops = { .get_phys_page_debug = riscv_cpu_get_phys_page_debug, .write_elf64_note = riscv_cpu_write_elf64_note, .write_elf32_note = riscv_cpu_write_elf32_note, + .monitor_get_register = riscv_monitor_get_register_legacy, .legacy_vmsd = &vmstate_riscv_cpu, };#endif
target/riscv/monitor.c +3 -1
@@ -26,6 +26,7 @@#include "monitor/monitor.h" #include "monitor/hmp.h" #include "system/memory.h" +#include "internals.h" #ifdef TARGET_RISCV64 #define PTE_HEADER_FIELDS "vaddr paddr "\
@@ -310,7 +311,8 @@ static bool reg_is_vreg(const char *name)return false; } -int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval) +int riscv_monitor_get_register_legacy (CPUState *cs,const char *name, +uint64_t *pval) {CPURISCVState *env = &RISCV_CPU (cs)->env;target_ulong val =0 ;
Signature · 1 line
2.53.0
Re: [PATCH v2 12/27] target/riscv: Register target_get_monitor_def in SysemuCPUOps
Quoted 9 lines · Philippe Mathieu-Daudé
Rename
target_get_monitor_def()asriscv_monitor_get_register_legacy()and register itasSysemuCPUOps::monitor_get_register()handler.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- target/riscv/internals.h | 3 +++ target/riscv/cpu.c | 1 + target/riscv/monitor.c | 4 +++- 3 files changed, 7 insertions(+), 1 deletion(-)
r~
PATCH v2 13/27 monitor: Remove target_get_monitor_def()
In reply to Philippe Mathieu-Daudétarget_get_monitor_def() is now only a dead stub. Remove as pointless.
--- include/monitor/hmp.h | 2 -- monitor/hmp.c | 7 +++---- stubs/target-get-monitor-def.c | 29 ----------------------------- stubs/meson.build | 1 - 4 files changed, 3 insertions(+), 36 deletions(-) delete mode 100644 stubs/target-get-monitor-def.c
include/monitor/hmp.h +0 -2
@@ -23,8 +23,6 @@ struct MonitorDef {int64_t (*get_value)(Monitor *mon,const MonitorDef *md,int offset); }; -int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval); -CPUArchState *mon_get_cpu_env (Monitor *mon);CPUState *mon_get_cpu (Monitor *mon);
monitor/hmp.c +3 -4
@@ -1632,11 +1632,10 @@ static int get_monitor_def(Monitor *mon, int64_t *pval, const char *name) } } -if (cs->cc->sysemu_ops->monitor_get_register) { - ret = cs->cc->sysemu_ops->monitor_get_register (cs, name, &tmp); - }else { - ret =target_get_monitor_def (cs, name, &tmp); +if (!cs->cc->sysemu_ops->monitor_get_register) { +return -1 ; } + ret = cs->cc->sysemu_ops->monitor_get_register (cs, name, &tmp);if (!ret) { *pval =target_long_bits () ==32 ? (int32_t )tmp : tmp; }
stubs/target-get-monitor-def.c deleted +0 -29
@@ -1,29 +0,0 @@ -/* -* Stub for target_get_monitor_def. -* -* Copyright IBM Corp., 2015 -* -* Author: Alexey Kardashevskiy <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, -* or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, see <http://www.gnu.org/licenses/>. -*/ - -#include "qemu/osdep.h" - -int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval); - -int target_get_monitor_def (CPUState *cs,const char *name,uint64_t *pval) -{ -return -1 ; -}
stubs/meson.build +0 -1
@@ -74,7 +74,6 @@ if have_system stub_ss.add(files('igvm.c')) endif stub_ss.add(files('kvm.c')) - stub_ss.add(files('target-get-monitor-def.c')) stub_ss.add(files('win32-kbd-hook.c')) stub_ss.add(files('xen-hw-stub.c')) stub_ss.add(files('monitor-arm-gic.c'))
Signature · 1 line
2.53.0
Re: [PATCH v2 13/27] monitor: Remove target_get_monitor_def()
Quoted 10 lines · Philippe Mathieu-Daudé
target_get_monitor_def()is now only a dead stub. Remove as pointless.Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- include/monitor/hmp.h | 2 -- monitor/hmp.c | 7 +++---- stubs/target-get-monitor-def.c | 29 ----------------------------- stubs/meson.build | 1 - 4 files changed, 3 insertions(+), 36 deletions(-)delete mode 100644
stubs/target-get-monitor-def.c
r~
PATCH v2 14/27 monitor/meson: Use SPICE with migration HMP commands
In reply to Philippe Mathieu-DaudéWhen moving code around in commit 27be86351ec ("migration: Move the QMP command from monitor/ to migration/") we forgot to update the meson rule about SPICE pkg-config flags.
--- migration/meson.build | 2 +- monitor/meson.build | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
migration/meson.build +1 -1
@@ -23,7 +23,6 @@ system_ss.add(files( 'fd.c', 'file.c', 'global_state.c', - 'migration-hmp-cmds.c', 'migration.c', 'multifd.c', 'multifd-device-state.c',
@@ -37,6 +36,7 @@ system_ss.add(files( 'socket.c', 'tls.c', ), gnutls, zlib) +system_ss.add([spice_headers, files('migration-hmp-cmds.c'), spice]) if get_option('replication').allowed() system_ss.add(files('colo-failover.c', 'colo.c', 'multifd-colo.c'))
monitor/meson.build +2 -2
@@ -5,8 +5,8 @@ system_ss.add(files( 'hmp-cmds.c', 'hmp.c', 'qemu-config-qmp.c', + 'qmp-cmds.c', )) -system_ss.add([spice_headers, files('qmp-cmds.c')]) specific_ss.add(when: 'CONFIG_SYSTEM_ONLY', - if_true: [files('hmp-target.c'), spice]) + if_true: [files('hmp-target.c')])
Signature · 1 line
2.53.0
Re: [PATCH v2 14/27] monitor/meson: Use SPICE with migration HMP commands
Quoted 5 lines · Philippe Mathieu-Daudé
When moving code around in commit
27be86351ec("migration: Move the QMP command from monitor/ to migration/") we forgot to update the meson rule about SPICE pkg-config flags.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Signature · 1 line
Peter Xu
Re: [PATCH v2 14/27] monitor/meson: Use SPICE with migration HMP commands
In reply to Philippe Mathieu-DaudéQuoted 10 lines · Philippe Mathieu-Daudé
When moving code around in commit
27be86351ec("migration: Move the QMP command from monitor/ to migration/") we forgot to update the meson rule about SPICE pkg-config flags.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- migration/meson.build | 2 +- monitor/meson.build | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
PATCH v2 15/27 stubs: Rename monitor* -> qmp* files
In reply to Philippe Mathieu-DaudéWe use 'HMP' for Human monitor and 'QMP' for 'Machine protocol'. These files aren't about human monitor but QMP, so rename them for clarity using the 'qmp-' prefix instead of 'monitor-'.
---
MAINTAINERS | 6 ++++++
stubs/{monitor-arm-gic.c => qmp-arm-gic.c} | 0
...nitor-cpu-s390x-kvm.c => qmp-cpu-s390x-kvm.c} | 0
stubs/{monitor-cpu-s390x.c => qmp-cpu-s390x.c} | 0
stubs/{monitor-cpu.c => qmp-cpu.c} | 0
stubs/{monitor-i386-rtc.c => qmp-i386-rtc.c} | 0
stubs/{monitor-i386-sev.c => qmp-i386-sev.c} | 0
stubs/{monitor-i386-sgx.c => qmp-i386-sgx.c} | 0
stubs/{monitor-i386-xen.c => qmp-i386-xen.c} | 0
stubs/meson.build | 16 ++++++++--------
10 files changed, 14 insertions(+), 8 deletions(-)
rename stubs/{monitor-arm-gic.c => qmp-arm-gic.c} (100%)
rename stubs/{monitor-cpu-s390x-kvm.c => qmp-cpu-s390x-kvm.c} (100%)
rename stubs/{monitor-cpu-s390x.c => qmp-cpu-s390x.c} (100%)
rename stubs/{monitor-cpu.c => qmp-cpu.c} (100%)
rename stubs/{monitor-i386-rtc.c => qmp-i386-rtc.c} (100%)
rename stubs/{monitor-i386-sev.c => qmp-i386-sev.c} (100%)
rename stubs/{monitor-i386-sgx.c => qmp-i386-sgx.c} (100%)
rename stubs/{monitor-i386-xen.c => qmp-i386-xen.c} (100%)MAINTAINERS +6 -0
@@ -121,6 +121,7 @@ F: include/hw/s390x/ F: include/hw/watchdog/wdt_diag288.h F: pc-bios/s390-ccw/ F: pc-bios/s390-ccw.img +F: stubs/qmp-cpu-s390x.c F: target/s390x/ F: docs/system/target-s390x.rst F: docs/system/s390x/
@@ -496,6 +497,7 @@ M: Christian Borntraeger <[email protected]> R: Eric Farman <[email protected]> R: Matthew Rosato <[email protected]> S: Supported +F: stubs/qmp-cpu-s390x-kvm.c F: target/s390x/kvm/ F: target/s390x/machine.c F: target/s390x/sigp.c
@@ -510,6 +512,8 @@ L: [email protected] S: Supported F: docs/system/i386/amd-memory-encryption.rst F: docs/system/i386/sgx.rst +F: stubs/qmp-i386-sev.c +F: stubs/qmp-i386-sgx.c F: target/i386/kvm/ F: target/i386/sev* F: scripts/kvm/vmxcap
@@ -522,6 +526,7 @@ S: Supported F: include/system/kvm_xen.h F: target/i386/kvm/xen* F: hw/i386/kvm/xen* +F: stubs/qmp-i386-xen.c F: tests/functional/x86_64/test_kvm_xen.py Guest CPU Cores (other accelerators)
@@ -800,6 +805,7 @@ F: include/hw/timer/a9gtimer.h F: include/hw/timer/arm_mptimer.h F: include/hw/timer/armv7m_systick.h F: include/hw/misc/armv7m_ras.h +F: stubs/qmp-arm-gic.c F: tests/qtest/test-arm-mptimer.c Bananapi M2U
stubs/qmp-arm-gic.c renamed from stubs/monitor-arm-gic.c +0 -0
stubs/qmp-cpu-s390x-kvm.c renamed from stubs/monitor-cpu-s390x-kvm.c +0 -0
stubs/qmp-cpu-s390x.c renamed from stubs/monitor-cpu-s390x.c +0 -0
stubs/qmp-cpu.c renamed from stubs/monitor-cpu.c +0 -0
stubs/qmp-i386-rtc.c renamed from stubs/monitor-i386-rtc.c +0 -0
stubs/qmp-i386-sev.c renamed from stubs/monitor-i386-sev.c +0 -0
stubs/qmp-i386-sgx.c renamed from stubs/monitor-i386-sgx.c +0 -0
stubs/qmp-i386-xen.c renamed from stubs/monitor-i386-xen.c +0 -0
stubs/meson.build +8 -8
@@ -76,14 +76,14 @@ if have_system stub_ss.add(files('kvm.c')) stub_ss.add(files('win32-kbd-hook.c')) stub_ss.add(files('xen-hw-stub.c')) - stub_ss.add(files('monitor-arm-gic.c')) - stub_ss.add(files('monitor-i386-rtc.c')) - stub_ss.add(files('monitor-i386-sev.c')) - stub_ss.add(files('monitor-i386-sgx.c')) - stub_ss.add(files('monitor-i386-xen.c')) - stub_ss.add(files('monitor-cpu.c')) - stub_ss.add(files('monitor-cpu-s390x.c')) - stub_ss.add(files('monitor-cpu-s390x-kvm.c')) + stub_ss.add(files('qmp-arm-gic.c')) + stub_ss.add(files('qmp-i386-rtc.c')) + stub_ss.add(files('qmp-i386-sev.c')) + stub_ss.add(files('qmp-i386-sgx.c')) + stub_ss.add(files('qmp-i386-xen.c')) + stub_ss.add(files('qmp-cpu.c')) + stub_ss.add(files('qmp-cpu-s390x.c')) + stub_ss.add(files('qmp-cpu-s390x-kvm.c')) endif if have_system or have_user
Signature · 1 line
2.53.0
Re: [PATCH v2 15/27] stubs: Rename monitor* -> qmp* files
Quoted 17 lines · Philippe Mathieu-Daudé
We use 'HMP' for Human monitor and 'QMP' for 'Machine protocol'. These files aren't about human monitor but QMP, so rename them for clarity using the 'qmp-' prefix instead of 'monitor-'.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- MAINTAINERS | 6 ++++++ stubs/{monitor-arm-gic.c => qmp-arm-gic.c} | 0 ...nitor-cpu-s390x-kvm.c => qmp-cpu-s390x-kvm.c} | 0 stubs/{monitor-cpu-s390x.c => qmp-cpu-s390x.c} | 0 stubs/{monitor-cpu.c => qmp-cpu.c} | 0 stubs/{monitor-i386-rtc.c => qmp-i386-rtc.c} | 0 stubs/{monitor-i386-sev.c => qmp-i386-sev.c} | 0 stubs/{monitor-i386-sgx.c => qmp-i386-sgx.c} | 0 stubs/{monitor-i386-xen.c => qmp-i386-xen.c} | 0 stubs/meson.build | 16 ++++++++-------- 10 files changed, 14 insertions(+), 8 deletions(-)
Quoted 9 lines
rename
stubs/{monitor-arm-gic.c=>qmp-arm-gic.c} (100%) renamestubs/{monitor-cpu-s390x-kvm.c=>qmp-cpu-s390x-kvm.c} (100%) renamestubs/{monitor-cpu-s390x.c=>qmp-cpu-s390x.c} (100%) renamestubs/{monitor-cpu.c=>qmp-cpu.c} (100%)
renamestubs/{monitor-i386-rtc.c=>qmp-i386-rtc.c} (100%) renamestubs/{monitor-i386-sev.c=>qmp-i386-sev.c} (100%) renamestubs/{monitor-i386-sgx.c=>qmp-i386-sgx.c} (100%) renamestubs/{monitor-i386-xen.c=>qmp-i386-xen.c} (100%)
PATCH v2 16/27 monitor: Make 'info via' a generic command
In reply to Philippe Mathieu-DaudéIn order to build hmp-commands-info.hx once we need to stop using device target-specific check. Use the generic pattern to make the command available on all targets, providing a stub with kind error message when the device is not available.
--- MAINTAINERS | 2 +- hw/misc/mos6522-stub.c | 16 ++++++++++++++++ hmp-commands-info.hx | 2 -- hw/misc/meson.build | 1 + 4 files changed, 18 insertions(+), 3 deletions(-) create mode 100644 hw/misc/mos6522-stub.c
MAINTAINERS +1 -1
@@ -1558,7 +1558,7 @@ F: hw/ppc/mac_newworld.c F: hw/pci-host/uninorth.c F: hw/pci-bridge/dec.[hc] F: hw/misc/macio/ -F: hw/misc/mos6522.c +F: hw/misc/mos6522*.c F: hw/nvram/mac_nvram.c F: hw/ppc/fw_cfg.c F: hw/input/adb*
hw/misc/mos6522-stub.c new file +16 -0
@@ -0,0 +1,16 @@ +/* +* QEMU MOS6522 VIA stubs +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/monitor.h" +#include "monitor/hmp.h" + +void hmp_info_via (Monitor *mon,const QDict *qdict) +{ +monitor_printf (mon,"MOS6522 VIA is not available in this QEMU\n" ); +}
hmp-commands-info.hx +0 -2
@@ -885,7 +885,6 @@ SRST Show intel SGX information. ERST -#if defined(CONFIG_MOS6522) { .name = "via", .args_type = "",
@@ -893,7 +892,6 @@ ERST .help = "show guest mos6522 VIA devices", .cmd = hmp_info_via, }, -#endif SRST ``info via``
hw/misc/meson.build +1 -0
@@ -20,6 +20,7 @@ system_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_ras.c')) # Mac devices system_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c')) +stub_ss.add(files('mos6522-stub.c')) system_ss.add(when: 'CONFIG_DJMEMC', if_true: files('djmemc.c')) system_ss.add(when: 'CONFIG_IOSB', if_true: files('iosb.c'))
Signature · 1 line
2.53.0
Re: [PATCH v2 16/27] monitor: Make 'info via' a generic command
Quoted 5 lines · Philippe Mathieu-Daudé
In order to build hmp-commands-info.hx once we need to stop using device target-specific check. Use the generic pattern to make the command available on all targets, providing a stub with kind error message when the device is not available.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- MAINTAINERS | 2 +- hw/misc/mos6522-stub.c | 16 ++++++++++++++++ hmp-commands-info.hx | 2 -- hw/misc/meson.build | 1 + 4 files changed, 18 insertions(+), 3 deletions(-)create mode 100644
hw/misc/mos6522-stub.c
r~
PATCH v2 17/27 monitor: Make Xen emulation commands generic ones
In reply to Philippe Mathieu-DaudéIn order to build hmp-commands.hx once we need to stop using device target-specific check. Use the generic pattern to make the command available on all targets, providing a stub with kind error message when the feature is not available.
--- hw/i386/kvm/xen-stubs.c | 12 ++++++++++++ hmp-commands.hx | 2 -- 2 files changed, 12 insertions(+), 2 deletions(-)
hw/i386/kvm/xen-stubs.c +12 -0
@@ -12,6 +12,8 @@#include "qemu/osdep.h" #include "qapi/error.h" +#include "monitor/monitor.h" +#include "monitor/hmp.h" #include "xen_evtchn.h" #include "xen_primary_console.h"
@@ -37,3 +39,13 @@ void xen_primary_console_create(void)void xen_primary_console_set_be_port (uint16_t port) { } + +void hmp_xen_event_list (Monitor *mon,const QDict *qdict) +{ +monitor_printf (mon,"XEN emulation is not available in this QEMU\n" ); +} + +void hmp_xen_event_inject (Monitor *mon,const QDict *qdict) +{ +monitor_printf (mon,"XEN emulation is not available in this QEMU\n" ); +}
hmp-commands.hx +0 -2
@@ -1839,7 +1839,6 @@ SRST ERST #endif -#if defined(CONFIG_XEN_EMU) { .name = "xen-event-inject", .args_type = "port:i",
@@ -1866,4 +1865,3 @@ SRST ``xen-event-list`` List event channels in the guest ERST -#endif
Signature · 1 line
2.53.0
Re: [PATCH v2 17/27] monitor: Make Xen emulation commands generic ones
Quoted 6 lines · Philippe Mathieu-Daudé
In order to build hmp-commands.hx once we need to stop using device target-specific check. Use the generic pattern to make the command available on all targets, providing a stub with kind error message when the feature is not available.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Re: [PATCH v2 17/27] monitor: Make Xen emulation commands generic ones
In reply to Philippe Mathieu-DaudéQuoted 10 lines · Philippe Mathieu-Daudé
In order to build hmp-commands.hx once we need to stop using device target-specific check. Use the generic pattern to make the command available on all targets, providing a stub with kind error message when the feature is not available.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- hw/i386/kvm/xen-stubs.c | 12 ++++++++++++ hmp-commands.hx | 2 -- 2 files changed, 12 insertions(+), 2 deletions(-)
r~
PATCH v2 18/27 system: Expose 'arch_init.h' as 'qemu/target-arch-defs.h'
In reply to Philippe Mathieu-DaudéWe already have a file unit outside of the local system' folder which include "system/arch_init.h". We want more files to use it, so make it official it is a generic header by moving it under include. Rename as "qemu/base-arch-defs.h" which is more descriptive.
--- system/arch_init.h => include/qemu/base-arch-defs.h | 10 ++++++++-- hw/pci/pci.c | 2 +- system/arch_init.c | 2 +- system/qdev-monitor.c | 2 +- system/vl.c | 2 +- 5 files changed, 12 insertions(+), 6 deletions(-) rename system/arch_init.h => include/qemu/base-arch-defs.h (92%)
include/qemu/base-arch-defs.h renamed from system/arch_init.h +8 -2
@@ -1,5 +1,11 @@ -#ifndef QEMU_ARCH_INIT_H -#define QEMU_ARCH_INIT_H +/* +* QEMU base architecture bit definitions +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef QEMU_BASE_ARCH_DEFS_H +#define QEMU_BASE_ARCH_DEFS_H #include "qapi/qapi-types-machine.h"
hw/pci/pci.c +1 -1
@@ -36,7 +36,7 @@#include "migration/qemu-file-types.h" #include "migration/vmstate.h" #include "net/net.h" -#include "system/arch_init.h" +#include "qemu/base-arch-defs.h" #include "system/numa.h" #include "system/runstate.h" #include "system/system.h"
system/arch_init.c +1 -1
@@ -22,7 +22,7 @@* THE SOFTWARE. */ #include "qemu/osdep.h" -#include "system/arch_init.h" +#include "qemu/base-arch-defs.h" #include "qemu/bitops.h" #include "qemu/target-info-qapi.h"
system/qdev-monitor.c +1 -1
@@ -23,7 +23,7 @@#include "monitor/hmp-completion.h" #include "monitor/monitor.h" #include "monitor/qdev.h" -#include "system/arch_init.h" +#include "qemu/base-arch-defs.h" #include "system/runstate.h" #include "qapi/error.h" #include "qapi/qapi-commands-qdev.h"
system/vl.c +1 -1
@@ -112,7 +112,7 @@#include "trace/control.h" #include "qemu/plugin.h" #include "qemu/queue.h" -#include "system/arch_init.h" +#include "qemu/base-arch-defs.h" #include "system/confidential-guest-support.h" #include "ui/qemu-spice.h"
Signature · 1 line
2.53.0
Re: [PATCH v2 18/27] system: Expose 'arch_init.h' as 'qemu/target-arch-defs.h'
Quoted 7 lines · Philippe Mathieu-Daudé
We already have a file unit outside of the local system' folder which include "
system/arch_init.h". We want more files to use it, so make it official it is a generic header by moving it under include. Rename as "qemu/base-arch-defs.h" which is more descriptive.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 8 lines
--- system/arch_init.h => include/qemu/base-arch-defs.h | 10 ++++++++-- hw/pci/pci.c | 2 +- system/arch_init.c | 2 +- system/qdev-monitor.c | 2 +- system/vl.c | 2 +- 5 files changed, 12 insertions(+), 6 deletions(-)rename
system/arch_init.h=>include/qemu/base-arch-defs.h(92%)
$subject no longer matches patch.
Otherwise,
r~
PATCH v2 19/27 monitor: Introduce HMPCommand::arch_bitmask field
In reply to Philippe Mathieu-DaudéAdd the @arch_bitmask field to the HMPCommand structure, allowing to restrict a command to a set of target architectures (represented by the QEMU_ARCH_* enum constants).
--- monitor/monitor-internal.h | 6 ++++++ monitor/hmp-target.c | 1 + monitor/hmp.c | 4 ++++ 3 files changed, 11 insertions(+)
monitor/monitor-internal.h +6 -0
@@ -74,6 +74,12 @@ typedef struct HMPCommand {const char *params;const char *help;const char *flags;/* p=preconfig */ +/** +* @arch_bitmask: bitmask of QEMU_ARCH_* constants +* Allow to restrict the command for a particular set of +* target architectures. +*/ +uint32_t arch_bitmask;void (*cmd)(Monitor *mon,const QDict *qdict);/* * If implementing a command that takes no arguments and simply
monitor/hmp-target.c +1 -0
@@ -23,6 +23,7 @@*/ #include "qemu/osdep.h" +#include "qemu/base-arch-defs.h" #include "monitor-internal.h" #include "monitor/qdev.h" #include "net/slirp.h"
monitor/hmp.c +4 -0
@@ -36,6 +36,7 @@#include "qemu/cutils.h" #include "qemu/log.h" #include "qemu/option.h" +#include "qemu/base-arch-defs.h" #include "qemu/target-info.h" #include "qemu/units.h" #include "exec/gdbstub.h"
@@ -219,6 +220,9 @@ static bool cmd_can_preconfig(const HMPCommand *cmd)static bool cmd_available (const HMPCommand *cmd) { +if (cmd->arch_bitmask && !qemu_arch_available (cmd->arch_bitmask)) { +return false; + }return phase_check (PHASE_MACHINE_READY ) ||cmd_can_preconfig (cmd); }
Signature · 1 line
2.53.0
Re: [PATCH v2 19/27] monitor: Introduce HMPCommand::arch_bitmask field
Quoted 18 lines · Philippe Mathieu-Daudé
Add the @arch_bitmask field to the HMPCommand structure, allowing to restrict a command to a set of target architectures (represented by the QEMU_ARCH_* enum constants).
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- monitor/monitor-internal.h | 6 ++++++ monitor/hmp-target.c | 1 + monitor/hmp.c | 4 ++++ 3 files changed, 11 insertions(+)monitor/monitor-internal.h +0
-0@@ -74,6 +74,12 @@ typedef struct HMPCommand {const char *params;const char *help;
monitor/monitor-internal.h typedef struct HMPCommand { · line 85
Quoted 10 lines
monitor/monitor-internal.h +6
-0const char *flags;/* p=preconfig */ +/** +* @arch_bitmask: bitmask of QEMU_ARCH_* constants +* Allow to restrict the command for a particular set of +* target architectures. +*/ +uint32_t arch_bitmask;void (*cmd)(Monitor *mon,const QDict *qdict);/* * If implementing a command that takes no arguments and simply
This and coroutine could be placed better to avoid two holes.
Otherwise,
r~
PATCH v2 20/27 hw/s390x: Reduce 'monitor/monitor.h' inclusions
In reply to Philippe Mathieu-DaudéWe want to make the HMP commands available for all targets, move the declarations to "monitor/hmp.h" where all other are, and only include the monitor headers in the source files.
--- include/hw/s390x/storage-attributes.h | 4 ---- include/hw/s390x/storage-keys.h | 3 --- include/monitor/hmp.h | 5 +++++ hw/s390x/s390-skeys.c | 2 ++ hw/s390x/s390-stattrib.c | 2 ++ 5 files changed, 9 insertions(+), 7 deletions(-)
include/hw/s390x/storage-attributes.h +0 -4
@@ -13,7 +13,6 @@#define S390_STORAGE_ATTRIBUTES_H #include "hw/core/qdev.h" -#include "monitor/monitor.h" #include "qom/object.h" #define TYPE_S390_STATTRIB "s390-storage_attributes"
@@ -72,7 +71,4 @@ static inline Object *kvm_s390_stattrib_create(void) }#endif -void hmp_info_cmma (Monitor *mon,const QDict *qdict); -void hmp_migrationmode (Monitor *mon,const QDict *qdict); -#endif /* S390_STORAGE_ATTRIBUTES_H */
include/hw/s390x/storage-keys.h +0 -3
@@ -13,7 +13,6 @@#define S390_STORAGE_KEYS_H #include "hw/core/qdev.h" -#include "monitor/monitor.h" #include "qom/object.h" #define TYPE_S390_SKEYS "s390-skeys"
@@ -123,8 +122,6 @@ int s390_skeys_set(S390SKeysState *ks, uint64_t start_gfn,S390SKeysState *s390_get_skeys_device (void );void s390_qmp_dump_skeys (const char *filename,Error **errp); -void hmp_dump_skeys (Monitor *mon,const QDict *qdict); -void hmp_info_skeys (Monitor *mon,const QDict *qdict);#define TYPE_DUMP_SKEYS_INTERFACE "dump-skeys-interface"
include/monitor/hmp.h +5 -0
@@ -182,4 +182,9 @@ void hmp_gva2gpa(Monitor *mon, const QDict *qdict);void hmp_gpa2hva (Monitor *mon,const QDict *qdict);void hmp_gpa2hpa (Monitor *mon,const QDict *qdict); +void hmp_dump_skeys (Monitor *mon,const QDict *qdict); +void hmp_info_skeys (Monitor *mon,const QDict *qdict); +void hmp_info_cmma (Monitor *mon,const QDict *qdict); +void hmp_migrationmode (Monitor *mon,const QDict *qdict); +#endif
hw/s390x/s390-skeys.c +2 -0
@@ -24,6 +24,8 @@#include "system/kvm.h" #include "migration/qemu-file-types.h" #include "migration/register.h" +#include "monitor/hmp.h" +#include "monitor/monitor.h" #include "trace.h" #define S390_SKEYS_BUFFER_SIZE (128 * KiB)/* Room for 128k storage keys */
hw/s390x/s390-stattrib.c +2 -0
@@ -15,6 +15,8 @@#include "system/ram_addr.h" #include "migration/qemu-file.h" #include "migration/register.h" +#include "monitor/hmp.h" +#include "monitor/monitor.h" #include "hw/core/qdev-properties.h" #include "hw/s390x/storage-attributes.h" #include "qemu/error-report.h"
Signature · 1 line
2.53.0
Re: [PATCH v2 20/27] hw/s390x: Reduce 'monitor/monitor.h' inclusions
Quoted 4 lines · Philippe Mathieu-Daudé
We want to make the HMP commands available for all targets, move the declarations to "
monitor/hmp.h" where all other are, and only include the monitor headers in the source files.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- include/hw/s390x/storage-attributes.h | 4 ---- include/hw/s390x/storage-keys.h | 3 --- include/monitor/hmp.h | 5 +++++ hw/s390x/s390-skeys.c | 2 ++ hw/s390x/s390-stattrib.c | 2 ++ 5 files changed, 9 insertions(+), 7 deletions(-)
r~
Re: [PATCH v2 20/27] hw/s390x: Reduce 'monitor/monitor.h' inclusions
In reply to Philippe Mathieu-DaudéQuoted 4 lines · Philippe Mathieu-Daudé
We want to make the HMP commands available for all targets, move the declarations to "
monitor/hmp.h" where all other are, and only include the monitor headers in the source files.
Quoted 8 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- include/hw/s390x/storage-attributes.h | 4 ---- include/hw/s390x/storage-keys.h | 3 --- include/monitor/hmp.h | 5 +++++ hw/s390x/s390-skeys.c | 2 ++ hw/s390x/s390-stattrib.c | 2 ++ 5 files changed, 9 insertions(+), 7 deletions(-)
PATCH v2 21/27 monitor: Do not check TARGET_S390X to build s390x commands
In reply to Philippe Mathieu-DaudéThese commands are filtered at build-time for s390x binary. By using the recently introduced HMPCommand::arch_bitmask flag we can filter them at runtime, making it possible to compile hmp-commands[-info].hx files once.
Since the methods are used inconditionally within hw/s390x/, define them in the same stub file.
--- MAINTAINERS | 1 + include/monitor/hmp.h | 7 +++++++ monitor/hmp-target.c | 5 ----- stubs/hmp-cmds-hw-s390x.c | 15 +++++++++++++++ hmp-commands-info.hx | 6 ++---- hmp-commands.hx | 6 ++---- stubs/meson.build | 1 + 7 files changed, 28 insertions(+), 13 deletions(-) create mode 100644 stubs/hmp-cmds-hw-s390x.c
MAINTAINERS +1 -0
@@ -122,6 +122,7 @@ F: include/hw/watchdog/wdt_diag288.h F: pc-bios/s390-ccw/ F: pc-bios/s390-ccw.img F: stubs/qmp-cpu-s390x.c +F: stubs/hmp-cmds-hw-s390x.c F: target/s390x/ F: docs/system/target-s390x.rst F: docs/system/s390x/
include/monitor/hmp.h +7 -0
@@ -16,6 +16,13 @@#include "qemu/readline.h" #include "qapi/qapi-types-common.h" +#include "monitor/monitor.h" + +#define HMP_STUB (cmd) \ + void hmp_##cmd(Monitor *mon, const QDict *qdict) \ + { \ + g_assert_not_reached(); \ + }struct MonitorDef {const char *name;
monitor/hmp-target.c +0 -5
@@ -35,11 +35,6 @@#include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-machine.h" -#if defined(TARGET_S390X ) -#include "hw/s390x/storage-keys.h" -#include "hw/s390x/storage-attributes.h" -#endif -/* Make devices configuration available for use in hmp-commands*.hx templates */ #include CONFIG_DEVICES
stubs/hmp-cmds-hw-s390x.c new file +15 -0
@@ -0,0 +1,15 @@ +/* +* Human Monitor hw/s390x stubs +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" + +HMP_STUB(dump_skeys) +HMP_STUB(info_cmma) +HMP_STUB(info_skeys) +HMP_STUB(migrationmode)
hmp-commands-info.hx +2 -4
@@ -717,30 +717,28 @@ SRST Show rocker OF-DPA groups. ERST -#if defined(TARGET_S390X) { .name = "skeys", .args_type = "addr:l", .params = "address", .help = "Display the value of a storage key", .cmd = hmp_info_skeys, + .arch_bitmask = QEMU_ARCH_S390X, }, -#endif SRST ``info skeys`` *address* Display the value of a storage key (s390 only) ERST -#if defined(TARGET_S390X) { .name = "cmma", .args_type = "addr:l,count:l?", .params = "address [count]", .help = "Display the values of the CMMA storage attributes for a range of pages", .cmd = hmp_info_cmma, + .arch_bitmask = QEMU_ARCH_S390X, }, -#endif SRST ``info cmma`` *address*
hmp-commands.hx +2 -4
@@ -1125,30 +1125,28 @@ SRST ERST -#if defined(TARGET_S390X) { .name = "dump-skeys", .args_type = "filename:F", .params = "", .help = "Save guest storage keys into file 'filename'.\n", .cmd = hmp_dump_skeys, + .arch_bitmask = QEMU_ARCH_S390X, }, -#endif SRST ``dump-skeys`` *filename* Save guest storage keys to a file. ERST -#if defined(TARGET_S390X) { .name = "migration_mode", .args_type = "mode:i", .params = "mode", .help = "Enables or disables migration mode\n", .cmd = hmp_migrationmode, + .arch_bitmask = QEMU_ARCH_S390X, }, -#endif SRST ``migration_mode`` *mode*
stubs/meson.build +1 -0
@@ -84,6 +84,7 @@ if have_system stub_ss.add(files('qmp-cpu.c')) stub_ss.add(files('qmp-cpu-s390x.c')) stub_ss.add(files('qmp-cpu-s390x-kvm.c')) + stub_ss.add(files('hmp-cmds-hw-s390x.c')) endif if have_system or have_user
Signature · 1 line
2.53.0
Re: [PATCH v2 21/27] monitor: Do not check TARGET_S390X to build s390x commands
Quoted 18 lines · Philippe Mathieu-Daudé
These commands are filtered at build-time for s390x binary. By using the recently
introducedHMPCommand::arch_bitmaskflag we can filter them at runtime, making it possible to compile hmp-commands[-info].hx files once.Since the methods are used inconditionally within hw/s390x/, define them in the same stub file.
Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- MAINTAINERS | 1 + include/monitor/hmp.h | 7 +++++++ monitor/hmp-target.c | 5 ----- stubs/hmp-cmds-hw-s390x.c | 15 +++++++++++++++ hmp-commands-info.hx | 6 ++---- hmp-commands.hx | 6 ++---- stubs/meson.build | 1 + 7 files changed, 28 insertions(+), 13 deletions(-)
Quoted 1 line
create mode 100644
stubs/hmp-cmds-hw-s390x.c
r~
Re: [PATCH v2 21/27] monitor: Do not check TARGET_S390X to build s390x commands
In reply to Philippe Mathieu-DaudéQuoted 9 lines · Philippe Mathieu-Daudé
These commands are filtered at build-time for s390x binary. By using the recently introduced
HMPCommand::arch_bitmaskflag we can filter them at runtime, making it possible to compile hmp-commands[-info].hx files once.Since the methods are used inconditionally within hw/s390x/, define them in the same stub file.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 10 lines
--- MAINTAINERS | 1 + include/monitor/hmp.h | 7 +++++++ monitor/hmp-target.c | 5 ----- stubs/hmp-cmds-hw-s390x.c | 15 +++++++++++++++ hmp-commands-info.hx | 6 ++---- hmp-commands.hx | 6 ++---- stubs/meson.build | 1 + 7 files changed, 28 insertions(+), 13 deletions(-) create mode 100644 stubs/hmp-cmds-hw-s390x.c
PATCH v2 22/27 monitor: Do not check TARGET_I386 to build target/i386/ commands
In reply to Philippe Mathieu-DaudéThese commands are filtered at build-time for i386/x86_64 binaries. By using the recently introduced HMPCommand::arch_bitmask flag we can filter them at runtime, making it possible to compile hmp-commands[-info].hx files once.
Since these methods are used inconditionally within target/i386/, define them in the same stub file.
--- MAINTAINERS | 1 + stubs/hmp-cmds-target-i386.c | 13 +++++++++++++ hmp-commands-info.hx | 4 +--- hmp-commands.hx | 5 +---- stubs/meson.build | 1 + 5 files changed, 17 insertions(+), 7 deletions(-) create mode 100644 stubs/hmp-cmds-target-i386.c
MAINTAINERS +1 -0
@@ -148,6 +148,7 @@ F: configs/targets/i386-softmmu.mak F: configs/targets/x86_64-softmmu.mak F: docs/system/i386/ F: docs/system/target-i386* +F: stubs/hmp-cmds-target-i386.c F: target/i386/*.[ch] F: target/i386/Kconfig F: target/i386/meson.build
stubs/hmp-cmds-target-i386.c new file +13 -0
@@ -0,0 +1,13 @@ +/* +* Human Monitor x86 stubs +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" + +HMP_STUB (info_local_apic) +HMP_STUB (mce)
hmp-commands-info.hx +1 -3
@@ -113,16 +113,14 @@ SRST Show the cpu registers. ERST -#if defined(TARGET_I386) { .name = "lapic", .args_type = "apic-id:i?", .params = "[apic-id]", .help = "show local apic state (apic-id: local apic to read, default is which of current CPU)", - .cmd = hmp_info_local_apic, + .arch_bitmask = QEMU_ARCH_I386, }, -#endif SRST ``info lapic``
hmp-commands.hx +1 -4
@@ -1488,18 +1488,15 @@ SRST Stop the QEMU embedded NBD server. ERST - -#if defined(TARGET_I386) - { .name = "mce", .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", .params = "[-b] cpu bank status mcgstatus addr misc", .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]", .cmd = hmp_mce, + .arch_bitmask = QEMU_ARCH_I386, }, -#endif SRST ``mce`` *cpu* *bank* *status* *mcgstatus* *addr* *misc* Inject an MCE on the given CPU (x86 only).
stubs/meson.build +1 -0
@@ -85,6 +85,7 @@ if have_system stub_ss.add(files('qmp-cpu-s390x.c')) stub_ss.add(files('qmp-cpu-s390x-kvm.c')) stub_ss.add(files('hmp-cmds-hw-s390x.c')) + stub_ss.add(files('hmp-cmds-target-i386.c')) endif if have_system or have_user
Signature · 1 line
2.53.0
Re: [PATCH v2 22/27] monitor: Do not check TARGET_I386 to build target/i386/ commands
Quoted 9 lines · Philippe Mathieu-Daudé
These commands are filtered at build-time for i386/x86_64 binaries. By using the recently
introducedHMPCommand::arch_bitmaskflag we can filter them at runtime, making it possible to compile hmp-commands[-info].hx files once.Since these methods are used inconditionally within target/i386/, define them in the same stub file.
Signed-off-by Philippe Mathieu-Daudé<[email protected]>
Quoted 8 lines
--- MAINTAINERS | 1 + stubs/hmp-cmds-target-i386.c | 13 +++++++++++++ hmp-commands-info.hx | 4 +--- hmp-commands.hx | 5 +---- stubs/meson.build | 1 + 5 files changed, 17 insertions(+), 7 deletions(-)create mode 100644
stubs/hmp-cmds-target-i386.c
r~
PATCH v2 23/27 monitor: Do not check TARGET_I386 to build 'info sgx' command
In reply to Philippe Mathieu-DaudéThis command is filtered at build-time for i386/x86_64 binaries. By using the recently introduced HMPCommand::arch_bitmask flag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.
Since the method depends on the CONFIG_SGX definition, define it in its own stub file.
--- MAINTAINERS | 1 + hw/i386/sgx-hmp-stub.c | 16 ++++++++++++++++ hw/i386/sgx-stub.c | 5 ----- hmp-commands-info.hx | 3 +-- hw/i386/meson.build | 1 + 5 files changed, 19 insertions(+), 7 deletions(-) create mode 100644 hw/i386/sgx-hmp-stub.c
MAINTAINERS +1 -0
@@ -514,6 +514,7 @@ L: [email protected] S: Supported F: docs/system/i386/amd-memory-encryption.rst F: docs/system/i386/sgx.rst +F: hw/i386/sgx* F: stubs/qmp-i386-sev.c F: stubs/qmp-i386-sgx.c F: target/i386/kvm/
hw/i386/sgx-hmp-stub.c new file +16 -0
@@ -0,0 +1,16 @@ +/* +* Human Monitor 'info sgx' stub (CONFIG_SGX) +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" +#include "monitor/monitor.h" + +void hmp_info_sgx (Monitor *mon,const QDict *qdict) +{ +monitor_printf (mon,"SGX is not available in this QEMU\n" ); +}
hw/i386/sgx-stub.c +0 -5
@@ -22,11 +22,6 @@ SgxInfo *qmp_query_sgx_capabilities(Error **errp)return NULL ; } -void hmp_info_sgx (Monitor *mon,const QDict *qdict) -{ -monitor_printf (mon,"SGX is not available in this QEMU\n" ); -} -void pc_machine_init_sgx_epc (PCMachineState *pcms) {memset (&pcms->sgx_epc,0 ,sizeof (SGXEPCState));
hmp-commands-info.hx +1 -2
@@ -866,15 +866,14 @@ SRST Display the vcpu dirty page limit information. ERST -#if defined(TARGET_I386) { .name = "sgx", .args_type = "", .params = "", .help = "show intel SGX information", .cmd = hmp_info_sgx, + .arch_bitmask = QEMU_ARCH_I386, }, -#endif SRST ``info sgx``
hw/i386/meson.build +1 -0
@@ -24,6 +24,7 @@ i386_ss.add(when: 'CONFIG_VTD', if_true: files('intel_iommu.c')) i386_ss.add(when: 'CONFIG_VTD_ACCEL', if_true: files('intel_iommu_accel.c')) i386_ss.add(when: 'CONFIG_SGX', if_true: files('sgx-epc.c','sgx.c'), if_false: files('sgx-stub.c')) +stub_ss.add(files('sgx-hmp-stub.c')) i386_ss.add(when: 'CONFIG_ACPI', if_true: files('acpi-common.c')) i386_ss.add(when: 'CONFIG_PC', if_true: files(
Signature · 1 line
2.53.0
Re: [PATCH v2 23/27] monitor: Do not check TARGET_I386 to build 'info sgx' command
Quoted 9 lines · Philippe Mathieu-Daudé
This command is filtered at build-time for i386/x86_64 binaries. By using the recently
introducedHMPCommand::arch_bitmaskflag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.Since the method depends on the
CONFIG_SGXdefinition, define it in its own stub file.Signed-off-by Philippe Mathieu-Daudé<[email protected]>
Quoted 8 lines
--- MAINTAINERS | 1 + hw/i386/sgx-hmp-stub.c | 16 ++++++++++++++++ hw/i386/sgx-stub.c | 5 ----- hmp-commands-info.hx | 3 +-- hw/i386/meson.build | 1 + 5 files changed, 19 insertions(+), 7 deletions(-)create mode 100644
hw/i386/sgx-hmp-stub.c
r~
PATCH v2 24/27 monitor: Do not check TARGET_I386 to build 'info sev' command
In reply to Philippe Mathieu-DaudéThis command is filtered at build-time for i386/x86_64 binaries. By using the recently introduced HMPCommand::arch_bitmask flag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.
Since the method depends on the CONFIG_SEV definition, define it in its own stub file.
--- MAINTAINERS | 1 + stubs/hmp-cmd-info_sev.c | 16 ++++++++++++++++ target/i386/sev-system-stub.c | 5 ----- hmp-commands-info.hx | 3 +-- stubs/meson.build | 1 + 5 files changed, 19 insertions(+), 7 deletions(-) create mode 100644 stubs/hmp-cmd-info_sev.c
MAINTAINERS +1 -0
@@ -515,6 +515,7 @@ S: Supported F: docs/system/i386/amd-memory-encryption.rst F: docs/system/i386/sgx.rst F: hw/i386/sgx* +F: stubs/hmp-cmd-info_sev.c F: stubs/qmp-i386-sev.c F: stubs/qmp-i386-sgx.c F: target/i386/kvm/
stubs/hmp-cmd-info_sev.c new file +16 -0
@@ -0,0 +1,16 @@ +/* +* Human Monitor 'info sev' stub (CONFIG_SEV) +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" +#include "monitor/monitor.h" + +void hmp_info_sev (Monitor *mon,const QDict *qdict) +{ +monitor_printf (mon,"SEV is not available in this QEMU\n" ); +}
target/i386/sev-system-stub.c +0 -5
@@ -31,11 +31,6 @@ int sev_es_save_reset_vector(void *flash_ptr, uint64_t flash_size)g_assert_not_reached (); } -void hmp_info_sev (Monitor *mon,const QDict *qdict) -{ -monitor_printf (mon,"SEV is not available in this QEMU\n" ); -} -void pc_system_parse_sev_metadata (uint8_t *flash_ptr,size_t flash_size) { }
hmp-commands-info.hx +1 -2
@@ -812,15 +812,14 @@ SRST enabled) memory in bytes. ERST -#if defined(TARGET_I386) { .name = "sev", .args_type = "", .params = "", .help = "show SEV information", .cmd = hmp_info_sev, + .arch_bitmask = QEMU_ARCH_I386, }, -#endif SRST ``info sev``
stubs/meson.build +1 -0
@@ -84,6 +84,7 @@ if have_system stub_ss.add(files('qmp-cpu.c')) stub_ss.add(files('qmp-cpu-s390x.c')) stub_ss.add(files('qmp-cpu-s390x-kvm.c')) + stub_ss.add(files('hmp-cmd-info_sev.c')) stub_ss.add(files('hmp-cmds-hw-s390x.c')) stub_ss.add(files('hmp-cmds-target-i386.c')) endif
Signature · 1 line
2.53.0
Re: [PATCH v2 24/27] monitor: Do not check TARGET_I386 to build 'info sev' command
Quoted 9 lines · Philippe Mathieu-Daudé
This command is filtered at build-time for i386/x86_64 binaries. By using the recently
introducedHMPCommand::arch_bitmaskflag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.Since the method depends on the
CONFIG_SEVdefinition, define it in its own stub file.Signed-off-by Philippe Mathieu-Daudé<[email protected]>
Quoted 8 lines
--- MAINTAINERS | 1 + stubs/hmp-cmd-info_sev.c | 16 ++++++++++++++++ target/i386/sev-system-stub.c | 5 ----- hmp-commands-info.hx | 3 +-- stubs/meson.build | 1 + 5 files changed, 19 insertions(+), 7 deletions(-)create mode 100644
stubs/hmp-cmd-info_sev.c
r~
PATCH v2 25/27 monitor: Do not check TARGET_I386/RISCV to build 'info mem' command
In reply to Philippe Mathieu-DaudéThis command is filtered at build-time for i386/x86_64 and riscv32/riscv64 binaries. By using the recently introduced HMPCommand::arch_bitmask flag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.
Since the method depends on a pair of distinct targets, define it in its own stub file.
--- stubs/hmp-cmd-info_mem.c | 12 ++++++++++++ hmp-commands-info.hx | 3 +-- stubs/meson.build | 1 + 3 files changed, 14 insertions(+), 2 deletions(-) create mode 100644 stubs/hmp-cmd-info_mem.c
stubs/hmp-cmd-info_mem.c new file +12 -0
@@ -0,0 +1,12 @@ +/* +* Human Monitor 'info mem' stub +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" + +HMP_STUB (info_mem)
hmp-commands-info.hx +1 -2
@@ -209,15 +209,14 @@ SRST Show virtual to physical memory mappings. ERST -#if defined(TARGET_I386) || defined(TARGET_RISCV) { .name = "mem", .args_type = "", .params = "", .help = "show the active virtual memory mappings", .cmd = hmp_info_mem, + .arch_bitmask = QEMU_ARCH_I386 | QEMU_ARCH_RISCV, }, -#endif SRST ``info mem``
stubs/meson.build +1 -0
@@ -84,6 +84,7 @@ if have_system stub_ss.add(files('qmp-cpu.c')) stub_ss.add(files('qmp-cpu-s390x.c')) stub_ss.add(files('qmp-cpu-s390x-kvm.c')) + stub_ss.add(files('hmp-cmd-info_mem.c')) stub_ss.add(files('hmp-cmd-info_sev.c')) stub_ss.add(files('hmp-cmds-hw-s390x.c')) stub_ss.add(files('hmp-cmds-target-i386.c'))
Signature · 1 line
2.53.0
Re: [PATCH v2 25/27] monitor: Do not check TARGET_I386/RISCV to build 'info mem' command
Quoted 8 lines · Philippe Mathieu-Daudé
This command is filtered at build-time for i386/x86_64 and riscv32/riscv64 binaries. By using the recently introduced
HMPCommand::arch_bitmaskflag we can filter it at runtime, making it possible to compile hmp-commands-info.hx once.Since the method depends on a pair of distinct targets, define it in its own stub file.
Quoted 7 lines
Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- stubs/hmp-cmd-info_mem.c | 12 ++++++++++++ hmp-commands-info.hx | 3 +-- stubs/meson.build | 1 + 3 files changed, 14 insertions(+), 2 deletions(-)create mode 100644
stubs/hmp-cmd-info_mem.c
r~
PATCH v2 26/27 monitor: Do not check multiple TARGET_* to build 'info tlb' command
In reply to Philippe Mathieu-DaudéThis command is filtered at build-time for a selection of binaries. By using the recently introduced HMPCommand::arch_bitmask flag we can filter them at runtime, making it possible to compile hmp-commands-info.hx once.
Since the method depends on a pair of distinct targets, define it in its own stub file.
--- stubs/hmp-cmd-info_tlb.c | 12 ++++++++++++ hmp-commands-info.hx | 5 ++--- stubs/meson.build | 1 + 3 files changed, 15 insertions(+), 3 deletions(-) create mode 100644 stubs/hmp-cmd-info_tlb.c
stubs/hmp-cmd-info_tlb.c new file +12 -0
@@ -0,0 +1,12 @@ +/* +* Human Monitor 'info tlb' stub +* +* Copyright (c) Linaro +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "monitor/hmp.h" + +HMP_STUB (info_tlb)
hmp-commands-info.hx +2 -3
@@ -193,16 +193,15 @@ SRST Show PCI information. ERST -#if defined(TARGET_I386) || defined(TARGET_SH4) || defined(TARGET_SPARC) || \ - defined(TARGET_PPC) || defined(TARGET_XTENSA) || defined(TARGET_M68K) { .name = "tlb", .args_type = "", .params = "", .help = "show virtual to physical memory mappings", .cmd = hmp_info_tlb, + .arch_bitmask = QEMU_ARCH_I386 | QEMU_ARCH_SH4 | QEMU_ARCH_SPARC \ + | QEMU_ARCH_PPC | QEMU_ARCH_XTENSA | QEMU_ARCH_M68K, }, -#endif SRST ``info tlb``
stubs/meson.build +1 -0
@@ -86,6 +86,7 @@ if have_system stub_ss.add(files('qmp-cpu-s390x-kvm.c')) stub_ss.add(files('hmp-cmd-info_mem.c')) stub_ss.add(files('hmp-cmd-info_sev.c')) + stub_ss.add(files('hmp-cmd-info_tlb.c')) stub_ss.add(files('hmp-cmds-hw-s390x.c')) stub_ss.add(files('hmp-cmds-target-i386.c')) endif
Signature · 1 line
2.53.0
Re: [PATCH v2 26/27] monitor: Do not check multiple TARGET_* to build 'info tlb' command
Quoted 8 lines · Philippe Mathieu-Daudé
This command is filtered at build-time for a selection of binaries. By using the recently
introducedHMPCommand::arch_bitmaskflag we can filter them at runtime, making it possible to compile hmp-commands-info.hx once.Since the method depends on a pair of distinct targets, define it in its own stub file.
Quoted 7 lines
Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- stubs/hmp-cmd-info_tlb.c | 12 ++++++++++++ hmp-commands-info.hx | 5 ++--- stubs/meson.build | 1 + 3 files changed, 15 insertions(+), 3 deletions(-)create mode 100644
stubs/hmp-cmd-info_tlb.c
r~
PATCH v2 27/27 monitor: Merge hmp-target.c code within hmp-cmds.c
In reply to Philippe Mathieu-Daudéhmp-target.c doesn't contain any target-specific code anymore. Merge it within hmp-cmds.c (which is already built once).
--- MAINTAINERS | 1 - monitor/hmp-cmds.c | 40 ++++++++++++++++++++++++ monitor/hmp-target.c | 73 -------------------------------------------- monitor/meson.build | 3 -- 4 files changed, 40 insertions(+), 77 deletions(-) delete mode 100644 monitor/hmp-target.c
MAINTAINERS +0 -1
@@ -3414,7 +3414,6 @@ Human Monitor (HMP) M: Dr. David Alan Gilbert <[email protected]> S: Maintained F: monitor/monitor-internal.h -F: monitor/hmp-target.c F: monitor/monitor.c F: monitor/hmp* F: hmp.h
monitor/hmp-cmds.c +40 -0
@@ -14,6 +14,7 @@*/ #include "qemu/osdep.h" +#include "qemu/base-arch-defs.h" #include "system/address-spaces.h" #include "system/ioport.h" #include "exec/gdbstub.h"
@@ -22,19 +23,58 @@#include "monitor/hmp.h" #include "qemu/help_option.h" #include "monitor/hmp.h" +#include "monitor/hmp-completion.h" #include "monitor/monitor-internal.h" +#include "monitor/qdev.h" #include "qapi/error.h" #include "qapi/qapi-commands-control.h" #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" +#include "block/block-hmp-cmds.h" #include "qobject/qdict.h" #include "qemu/cutils.h" #include "qemu/log.h" +#include "net/slirp.h" +#include "system/device_tree.h" #include "system/hw_accel.h" #include "system/memory.h" #include "system/system.h" #include "disas/disas.h" +/* Please update hmp-commands.hx when adding or changing commands */ +static HMPCommand hmp_info_cmds[] = { +#include "hmp-commands-info.h" + {NULL ,NULL , }, +}; + +/* hmp_cmds and hmp_info_cmds would be sorted at runtime */ +static HMPCommand hmp_cmds[] = { +#include "hmp-commands.h" + {NULL ,NULL , }, +}; + +HMPCommand *hmp_cmds_for_target (bool info_command) +{ +return info_command ? hmp_info_cmds : hmp_cmds; +} + +static int +compare_mon_cmd (const void *a,const void *b) +{ +return strcmp (((const HMPCommand *)a)->name, + ((const HMPCommand *)b)->name); +} + +static void __attribute__((__constructor__))sortcmdlist (void ) +{ +qsort (hmp_cmds,ARRAY_SIZE (hmp_cmds) -1 , +sizeof (*hmp_cmds), + compare_mon_cmd); +qsort (hmp_info_cmds,ARRAY_SIZE (hmp_info_cmds) -1 , +sizeof (*hmp_info_cmds), + compare_mon_cmd); +} +bool hmp_handle_error (Monitor *mon,Error *err) {if (err) {
monitor/hmp-target.c deleted +0 -73
73 lines not on this page · raw message
monitor/meson.build +0 -3
@@ -7,6 +7,3 @@ system_ss.add(files( 'qemu-config-qmp.c', 'qmp-cmds.c', )) - -specific_ss.add(when: 'CONFIG_SYSTEM_ONLY', - if_true: [files('hmp-target.c')])
Signature · 1 line
2.53.0
Re: [PATCH v2 27/27] monitor: Merge hmp-target.c code within hmp-cmds.c
Quoted 11 lines · Philippe Mathieu-Daudé
hmp-target.cdoesn't contain any target-specific code anymore. Merge it withinhmp-cmds.c(which is already built once).Signed-off-by Philippe Mathieu-Daudé<[email protected]>--- MAINTAINERS | 1 - monitor/hmp-cmds.c | 40 ++++++++++++++++++++++++ monitor/hmp-target.c | 73 -------------------------------------------- monitor/meson.build | 3 -- 4 files changed, 40 insertions(+), 77 deletions(-)delete mode 100644
monitor/hmp-target.c
r~