wireless-regdb: Fix incorrect entries found during comprehensive audit
cover wireless-regdb: Fix incorrect entries found during comprehensive audit
Following the South Africa (ZA) 6 GHz LPI fix submitted earlier, I audited all 182 countries in wireless-regdb across all WiFi bands (2.4 GHz, 5 GHz, 6 GHz, and 60 GHz), cross-referencing against official regulatory documents.
This series fixes six incorrect entries found during the audit:
Patches 1-3: 6 GHz power/bandwidth corrections
- HK: VLP (14 dBm) → LPI (24 dBm), freq 5925→5945, add NO-OUTDOOR
- KR: 15 dBm/160 MHz → 27 dBm/320 MHz per MSIT 2026-9
- RU: 100 mW → 200 mW per GKRCH Decision 22-65
Patch 4: DFS flag cleanup
- TG: Remove DFS from 2.4 GHz, 6 GHz, and 60 GHz (only valid on 5 GHz)
Patch 5: Unit typo fix
- UA: 60 GHz changed from (40 mW) back to (40) dBm — accidental mW suffix added in commit 90e83fc
Each patch includes the specific regulatory citation used for verification.
Louis Kotze (5):
wireless-regdb: Update 6 GHz rules for Hong Kong (HK)
wireless-regdb: Update 6 GHz rules for South Korea (KR)
wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
wireless-regdb: Remove incorrect DFS flags for Togo (TG)
wireless-regdb: Fix 60 GHz power unit for Ukraine (UA)
db.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
Signature · 1 line
2.53.0
PATCH 1/5 wireless-regdb: Update 6 GHz rules for Hong Kong (HK)
OFCA published HKCA 1081 Issue 2 (August 29, 2025), updating the 6 GHz WLAN specification for Hong Kong:
- LPI (indoor): 24 dBm EIRP
- VLP (outdoor): 14 dBm EIRP
- Frequency: 5945-6425 MHz (5925-5945 reserved as guard band)
The previous entry had VLP power only (14 dBm), no indoor flag, and used the wrong frequency start (5925 instead of 5945).
Update to LPI with correct frequency range and NO-OUTDOOR flag.
Reference:
HKCA 1081 Issue 2 (August 2025)
https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1081.pdf
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
@@ -883,7 +883,7 @@ country HK: DFS-ETSI (5250 - 5350 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR (5470 - 5730 @ 160), (27), DFS (5730 - 5850 @ 80), (36) - (5925 - 6425 @ 160), (14) + (5945 - 6425 @ 160), (24), NO-OUTDOOR # Source: # https://www.conatel.gob.hn/doc/Regulacion/resoluciones/2023/NR05-23.pdf
Signature · 1 line
2.53.0
PATCH 2/5 wireless-regdb: Update 6 GHz rules for South Korea (KR)
In reply to Louis KotzeMSIT issued Announcement No. 2026-9 (February 10, 2026, effective April 1, 2026), revising 6 GHz power limits and bandwidth:
Lower band (5925-6425 MHz): 1 W (30 dBm) EIRP indoor Upper band (6425-7125 MHz): 0.5 W (27 dBm) EIRP indoor
MSIT Announcement No. 2024-22 (May 30, 2024) previously updated the maximum bandwidth from 160 MHz to 320 MHz.
Since the database supports only one rule per band, use 27 dBm (the upper band limit) to ensure compliance across the full 5925-7125 MHz range. Update bandwidth from 160 to 320 MHz.
Reference:
MSIT Announcement No. 2026-9
https://gma.caict.ac.cn/en/update/103
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
@@ -1136,7 +1136,7 @@ country KR: DFS-JP (5470 - 5725 @ 160), (20), DFS (5725 - 5850 @ 80), (23) # 6 GHz band - (5925 - 7125 @ 160), (15), NO-OUTDOOR + (5925 - 7125 @ 320), (27), NO-OUTDOOR # 60 GHz band channels 1-4 (57000 - 66000 @ 2160), (43)
Signature · 1 line
2.53.0
PATCH 3/5 wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
In reply to Louis KotzeThe State Commission for Radio Frequencies (GKRCH) Decision No. 22-65 (December 23, 2022) authorized 6 GHz LPI at 200 mW (23 dBm) EIRP with 10 mW/MHz PSD. The current entry incorrectly uses 100 mW.
Reference:
GKRCH Decision No. 22-65 (2022-12-23)
https://www.eleoscompliance.com/en/article/russia-the-federal-communication-agency-fac-of-russia-allows-6ghz-wifi
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
@@ -1772,7 +1772,7 @@ country RU: (2400 - 2483.5 @ 40), (100mW) (5150 - 5350 @ 160), (100 mW), NO-OUTDOOR (5650 - 5850 @ 160), (100 mW), NO-OUTDOOR - (5925 - 6425 @ 160), (100 mW), NO-OUTDOOR + (5925 - 6425 @ 160), (200 mW), NO-OUTDOOR # 60 GHz band channels 1-4, ref: Changes to NLA 124_Order №129_22042015.pdf (57000 - 66000 @ 2160), (40), NO-OUTDOOR
Signature · 1 line
2.53.0
PATCH 5/5 wireless-regdb: Fix 60 GHz power unit for Ukraine (UA)
In reply to Louis KotzeCommit 90e83fc (December 2020) changed Ukraine's 60 GHz entry from
(40) to (40 mW), likely an accidental addition of the mW suffix when converting other bands to mW notation. This reduces the power limit from 40 dBm (10 W) to 40 mW (16 dBm) — a 1000x reduction.
ETSI EN 302 567, referenced in the entry's comment, specifies 40 dBm EIRP for 60 GHz. All other ETSI-based countries in the database use 40 dBm for this band.
Restore the correct power of 40 dBm.
Reference:
ETSI EN 302 567
Ukrainian law zakon.rada.gov.ua/laws/show/z0201-15#n48
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
@@ -2044,7 +2044,7 @@ country UA: DFS-ETSI (5725 - 5850 @ 80), (100 mW), NO-OUTDOOR (5945 - 6425 @ 320), (23), NO-OUTDOOR # 60 GHz band channels 1-4, ref: Etsi En 302 567 - (57000 - 66000 @ 2160), (40 mW), NO-OUTDOOR + (57000 - 66000 @ 2160), (40), NO-OUTDOOR country UG: DFS-FCC (2402 - 2482 @ 40), (20)
Signature · 1 line
2.53.0
PATCH 4/5 wireless-regdb: Remove incorrect DFS flags for Togo (TG)
In reply to Louis KotzeCommit aad0c26 (2024-07-19) added DFS flags to all bands for Togo, including 2.4 GHz, 6 GHz, and 60 GHz. DFS is only applicable to 5 GHz bands where radar avoidance is required.
The source regulation (ARCEP Decision N 226/ARCEP/DG/22) does not require DFS on 2.4 GHz, 6 GHz, or 60 GHz. Remove the incorrect DFS flags from these bands while keeping DFS on the 5 GHz entries where it is correct.
Reference:
ARCEP Decision N 226/ARCEP/DG/22
--- db.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
db.txt +3 -3
@@ -1945,11 +1945,11 @@ country TD: DFS-ETSI # Source: # https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf country TG: DFS-ETSI - (2400 - 2483.5 @ 40), (100 mW), DFS + (2400 - 2483.5 @ 40), (100 mW) (5150 - 5350 @ 80), (20), DFS (5470 - 5850 @ 160), (27), DFS - (5925 - 6425 @ 320), (23), DFS, NO-OUTDOOR - (57000 - 66000 @2160), (40), DFS + (5925 - 6425 @ 320), (23), NO-OUTDOOR + (57000 - 66000 @ 2160), (40) # Source: # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf
Signature · 1 line
2.53.0
Re: Question: Should FCC-region 6 GHz entries use the India PSD methodology?
In reply to a message not in the archiveHi Chen-Yu,
Following the patch series I just submitted, I have a question about the FCC-region 6 GHz entries.
Currently 12 countries (US, CA, BR, AR, CO, PE, SV, MX, CL, KY, HN, PY) use 12 dBm for 6 GHz LPI. I understand this was chosen as the absolute minimum across all device types and channel widths.
However, the India (IN) entry (commit 5db6ce73) uses a different methodology — PSD at 20 MHz minimum channel width:
India: 11 dBm/MHz × 20 MHz = 24 dBm
Applying the same approach to FCC (5 dBm/MHz PSD):
FCC: 5 dBm/MHz × 20 MHz = 18 dBm
18 dBm is compliant at every standard WiFi channel width (>=20 MHz) for both AP and client devices:
Width PSD limit FCC client max 18 dBm Legal? 20 MHz 18 dBm 24 dBm 18 dBm Yes 40 MHz 21 dBm 24 dBm 18 dBm Yes 80 MHz 24 dBm 24 dBm 18 dBm Yes 160 MHz 27 dBm 24 dBm 18 dBm Yes 320 MHz 30 dBm 24 dBm 18 dBm Yes
The reason I ask: during my work on the South Africa (ZA) fix, the 9 dBm gap between the regdb (14 dBm) and the AP's advertised power (23 dBm) caused repeated "regulatory prevented using AP config, downgraded" errors and complete 6 GHz association failure. The FCC gap is 18 dBm (12 vs 30), which would cause the same or worse symptoms for any Linux user connecting to a standard FCC LPI access point on 6 GHz.
Would the India PSD-at-20-MHz methodology be appropriate for FCC countries as well?
Thanks,
Louis
Re: Question: Should FCC-region 6 GHz entries use the India PSD methodology?
Hi,
Quoted 10 lines · Louis Kotze
Hi Chen-Yu,
Following the patch series I just submitted, I have a question about the FCC-region 6 GHz entries.
Currently 12 countries (US, CA, BR, AR, CO, PE, SV, MX, CL, KY, HN, PY) use 12 dBm for 6 GHz LPI. I understand this was chosen as the absolute minimum across all device types and channel widths.
Quoted 8 lines
However, the India (IN) entry (commit
5db6ce73) uses a different methodology — PSD at 20 MHz minimum channel width:India: 11 dBm/MHz × 20 MHz = 24 dBm
Applying the same approach to FCC (5 dBm/MHz PSD):
FCC: 5 dBm/MHz × 20 MHz = 18 dBm
The PSD limit is actually -1 dBm/MHz. The device class we consider is 6XD (indoor low power client). This translates to 12.01 dBm at 20 Mhz channel width. So the current rule in the database is correct.
Quoted 18 lines
18 dBm is compliant at every standard WiFi channel width (>=20 MHz) for both AP and client devices:
Width PSD limit FCC client max 18 dBm Legal? 20 MHz 18 dBm 24 dBm 18 dBm Yes 40 MHz 21 dBm 24 dBm 18 dBm Yes 80 MHz 24 dBm 24 dBm 18 dBm Yes 160 MHz 27 dBm 24 dBm 18 dBm Yes 320 MHz 30 dBm 24 dBm 18 dBm YesThe reason I ask: during my work on the South Africa (ZA) fix, the 9 dBm gap between the regdb (14 dBm) and the AP's advertised power (23 dBm) caused repeated "regulatory prevented using AP config, downgraded" errors and complete 6 GHz association failure. The FCC gap is 18 dBm (12 vs 30), which would cause the same or worse symptoms for any Linux user connecting to a standard FCC LPI access point on 6 GHz.
Quoted 2 lines
Would the India PSD-at-20-MHz methodology be appropriate for FCC countries as well?
As mentioned above, they are using the same methodology. It's just that the FCC PSD limit is very low.
Thanks
ChenYu
Re: [PATCH 1/5] wireless-regdb: Update 6 GHz rules for Hong Kong (HK)
In reply to Louis KotzeQuoted 10 lines · Louis Kotze
OFCA published HKCA 1081 Issue 2 (August 29, 2025), updating the 6 GHz WLAN specification for Hong Kong:
- LPI (indoor): 24 dBm EIRP
- VLP (outdoor): 14 dBm EIRP
- Frequency: 5945-6425 MHz (5925-5945 reserved as guard band)The previous entry had VLP power only (14 dBm), no indoor flag, and used the wrong frequency start (5925 instead of 5945).
As you mentioned, 5926-5945 is reserved as a guard band, i.e. the device cannot use it. So the rule is correct to start at 5945 MHz.
Quoted 1 line
Update to LPI with correct frequency range and NO-OUTDOOR flag.
There should be justification for picking LPI over VLP, since this is a choice made on the submitter's end. Same applies to the other patches.
There was one submission that picked VLP over LPI in favor of outdoor usage.
Thanks
ChenYu
Quoted 24 lines
Reference:
HKCA 1081 Issue 2 (August 2025)
https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1081.pdfSigned-off-by Louis Kotze <[email protected]>--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)db.txt +1
-2@@ -883,7 +883,7 @@ country HK: DFS-ETSI (5250 - 5350 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR (5470 - 5730 @ 160), (27), DFS (5730 - 5850 @ 80), (36) - (5925 - 6425 @ 160), (14) + (5945 - 6425 @ 160), (24), NO-OUTDOOR # Source: # https://www.conatel.gob.hn/doc/Regulacion/resoluciones/2023/NR05-23.pdf --2.53.0
Re: [PATCH 2/5] wireless-regdb: Update 6 GHz rules for South Korea (KR)
In reply to Louis KotzeQuoted 7 lines · Louis Kotze
MSIT issued Announcement No. 2026-9 (February 10, 2026, effective April 1, 2026), revising 6 GHz power limits and bandwidth:
Lower band (5925-6425 MHz): 1 W (30 dBm) EIRP indoor Upper band (6425-7125 MHz): 0.5 W (27 dBm) EIRP indoor
Quoted 6 lines
MSIT Announcement No. 2024-22 (May 30, 2024) previously updated the maximum bandwidth from 160 MHz to 320 MHz.
Since the database supports only one rule per band, use 27 dBm (the upper band limit) to ensure compliance across the full 5925-7125 MHz range. Update bandwidth from 160 to 320 MHz.
The database supports one rule per frequency range.
You can write it as two ranges, and add AUTO-BW to both. The kernel will see this and know that the two bands can be combined. That way if someone is using a smaller channel width that fits into the lower band, they can use a higher power limit. This is what we do for the 5 GHz bands that have varying requirements.
ChenYu
Quoted 24 lines
Reference:
MSIT Announcement No. 2026-9
https://gma.caict.ac.cn/en/update/103Signed-off-by Louis Kotze <[email protected]>--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)db.txt +1
-2@@ -1136,7 +1136,7 @@ country KR: DFS-JP (5470 - 5725 @ 160), (20), DFS (5725 - 5850 @ 80), (23) # 6 GHz band - (5925 - 7125 @ 160), (15), NO-OUTDOOR + (5925 - 7125 @ 320), (27), NO-OUTDOOR # 60 GHz band channels 1-4 (57000 - 66000 @ 2160), (43) --2.53.0
Re: [PATCH 1/5] wireless-regdb: Update 6 GHz rules for Hong Kong (HK)
In reply to Chen-Yu TsaiQuoted 22 lines · Chen-Yu Tsai
Quoted 10 lines · Louis Kotze
OFCA published HKCA 1081 Issue 2 (August 29, 2025), updating the 6 GHz WLAN specification for Hong Kong:
- LPI (indoor): 24 dBm EIRP
- VLP (outdoor): 14 dBm EIRP
- Frequency: 5945-6425 MHz (5925-5945 reserved as guard band)The previous entry had VLP power only (14 dBm), no indoor flag, and used the wrong frequency start (5925 instead of 5945).
As you mentioned, 5926-5945 is reserved as a guard band, i.e. the device cannot use it. So the rule is correct to start at 5945 MHz.
Quoted 1 line
Update to LPI with correct frequency range and NO-OUTDOOR flag.
There should be justification for picking LPI over VLP, since this is a choice made on the submitter's end. Same applies to the other patches.
Quoted 11 lines
There was one submission that picked VLP over LPI in favor of outdoor usage.
Thanks
ChenYuQuoted 4 lines
Reference:
HKCA 1081 Issue 2 (August 2025)
https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1081.pdfSigned-off-by Louis Kotze <[email protected]>
Oh, and please have an empty line before your Signed-off-by.
Quoted 20 lines
Quoted 20 lines
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)db.txt +1
-2@@ -883,7 +883,7 @@ country HK: DFS-ETSI (5250 - 5350 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR (5470 - 5730 @ 160), (27), DFS (5730 - 5850 @ 80), (36) - (5925 - 6425 @ 160), (14) + (5945 - 6425 @ 160), (24), NO-OUTDOOR # Source: # https://www.conatel.gob.hn/doc/Regulacion/resoluciones/2023/NR05-23.pdf --2.53.0
Re: [PATCH 4/5] wireless-regdb: Remove incorrect DFS flags for Togo (TG)
In reply to Louis KotzeHi,
Quoted 9 lines · Louis Kotze
Commit aad0c26 (2024-07-19) added DFS flags to all bands for Togo, including 2.4 GHz, 6 GHz, and 60 GHz. DFS is only applicable to 5 GHz bands where radar avoidance is required.
The source regulation (ARCEP Decision N 226/ARCEP/DG/22) does not require DFS on 2.4 GHz, 6 GHz, or 60 GHz. Remove the incorrect DFS flags from these bands while keeping DFS on the 5 GHz entries where it is correct.
I don't read French, but my translation app says that DFS is required for all bands except the 60 GHz band. I am looking at table 9 - broadband data transmission devices (pages 20-21).
If you're looking at table 3 - non-specific SRDs, then you get a much lower power limit.
ChenYu
Quoted 29 lines
Reference:
ARCEP Decision N 226/ARCEP/DG/22Signed-off-by Louis Kotze <[email protected]>--- db.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)db.txt +3
-4@@ -1945,11 +1945,11 @@ country TD: DFS-ETSI # Source: # https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf country TG: DFS-ETSI - (2400 - 2483.5 @ 40), (100 mW), DFS + (2400 - 2483.5 @ 40), (100 mW) (5150 - 5350 @ 80), (20), DFS (5470 - 5850 @ 160), (27), DFS - (5925 - 6425 @ 320), (23), DFS, NO-OUTDOOR - (57000 - 66000 @2160), (40), DFS + (5925 - 6425 @ 320), (23), NO-OUTDOOR + (57000 - 66000 @ 2160), (40) # Source: # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf --2.53.0
Re: [PATCH 3/5] wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
In reply to Louis KotzeQuoted 8 lines · Louis Kotze
The State Commission for Radio Frequencies (GKRCH) Decision No. 22-65 (December 23, 2022) authorized 6 GHz LPI at 200 mW (23 dBm) EIRP with 10 mW/MHz PSD. The current entry incorrectly uses 100 mW.
Reference:
GKRCH Decision No. 22-65 (2022-12-23)
https://www.eleoscompliance.com/en/article/russia-the-federal-communication-agency-fac-of-russia-allows-6ghz-wifi
This page doesn't actually contain any useful information.
I can't seem to access the reference from the original submission. I'll try again later.
I did find https://www.gccorp.com.tw/en/?p=2173 using the document name you gave, but that also mentions that "automatic power control system" is required. I assume that is TPC, which Linux basically doesn't have. So we still have a problem here. If the rules were based on FCC or EU regulations, then we sort of adopt a 3 dBm reduction in the limit.
ChenYu
Quoted 21 lines
Signed-off-by Louis Kotze <[email protected]>--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)db.txt +1
-2@@ -1772,7 +1772,7 @@ country RU: (2400 - 2483.5 @ 40), (100mW) (5150 - 5350 @ 160), (100 mW), NO-OUTDOOR (5650 - 5850 @ 160), (100 mW), NO-OUTDOOR - (5925 - 6425 @ 160), (100 mW), NO-OUTDOOR + (5925 - 6425 @ 160), (200 mW), NO-OUTDOOR # 60 GHz band channels 1-4, ref: Changes to NLA 124_Order №129_22042015.pdf (57000 - 66000 @ 2160), (40), NO-OUTDOOR --2.53.0
Re: [PATCH 3/5] wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
I brought up this issue previously, but nobody seemed to be interested and I can see why. The relevant Russian law is very convoluted. Plus, I see wrong sources being cited all the time (either from non-official sites or now broken government-maintained links). I hope the updated compilation I made makes this topic easier to navigate and removes ambiguity (such as the "automated power control system" part). Please bear with the long list of references.
As per the wireless-regdb principles
(https://wireless.docs.kernel.org/en/latest/en/developers/regulatory/statement.html#principles),
It should be reasonably impossible for a user to fail to comply with local regulations either unwittingly or by accident. That makes Russia a complicated case, since the frequencies and transmit power available for use by the general public in Russia are governed not by a single law, but by three bodies of legal documents:
* on registration of radio-electronic equipment;
* on allocation of radio frequency bands;
* the rules for the use of radio access equipment.
All of those must be taken into account to prevent the user from accidentally failing to comply with regulations. I'll break them down to the best of my ability and propose changes to the wireless-rgdb rules and source references.
-----
PART 1: on registration of radio-electronic equipment
-----
Since March 1st, 2025, 200 mW transmitters on the 5 or 6 GHz band are permitted without the need to apply for registration by the Decree of the Government of the Russian Federation dated July 1, 2024, No. 897 “On Amendments to the Decree of the Government of the Russian Federation dated October 20, 2021, No. 1800”
(http://publication.pravo.gov.ru/document/0001202407010020).
Translated citation from page 4:
Quoted 16 lines
25. Short-range devices:
[...]
b) In the annex to the specified list:
[...]
Clause 14 shall be amended as follows:
“14. User (terminal) transmitting equipment, including a receiving device, operating within the IEEE 802.11 (Wi-Fi) family of short-range standards, functioning in the radio frequency band 2400 - 2483.5 MHz, with a maximum allowable transmitter power of no more than 100 mW, including built-in or integrated components of other devices.
Quoted 5 lines
User (terminal) transmitting equipment, including a receiving device, operating within the IEEE 802.11 (Wi-Fi) family of short-range standards, functioning in the radio frequency bands 5150 - 5350 MHz and 5650 - 6425 MHz, with a maximum allowable transmitter power of no more than 200 mW, including built-in or integrated components of other devices.”
The amended document is the Decree of the Government of the Russian Federation dated October 20, 2021, No. 1800 “On the Procedure for the Registration of Radio-Electronic Equipment and High-Frequency Devices”
(http://publication.pravo.gov.ru/document/0001202110220034). The annex referenced by the amendments contains exceptions from the list of devices requiring registration with the Federal Service for Supervision of Communications, Information Technology, and Mass Media (Roskomnadzor).
PART 1 conclusion:
5150 — 5350 MHz 200 mW
5650 — 6425 MHz 200 mW
-----
PART 2: on allocation of radio frequency bands
-----
Another set of restrictions comes from the State Commission for Radio Frequencies under the Ministry of Communications and Information of the Russian Federation. I'll be citing the most recent amendments to the Decision of the SCRF dated May 7, 2007, No. 07-20-03-001 “On the Allocation of Radio Frequency Bands for Short-Range Devices”
(https://digital.gov.ru/documents/zasedanie-gkrch-ot-07-05-2007-protokol-№-07-20),
which apply to the relevant frequencies.
Decision of the SCRF dated June 16, 2021, No. 21-58-05
(https://digital.gov.ru/documents/zasedanie-gkrch-ot-16-iyunya-2021-g-protokol-№-21-58):
Quoted 3 lines
The SCRF decision dated May 7, 2007, No. 07-20-03-001,
“On the Allocation of Radio Frequency Bands for Short-Range Devices,” shall be revised as set forth in the annex to this SCRF decision.
Annex to the SCRF decision dated June 16, 2021 No. 21-58-05
(https://digital.gov.ru/uploaded/files/prilozhenie-k-resheniyu-gkrch-ot-16-iyunya-2021-g--21-58-05.pdf),
pages 10–11:
Quoted 4 lines
5150-5350 MHz – Maximum EIRP: 200 mW – Indoor use only. With the use of an automatic power control system. 5650-5850 MHz – Maximum EIRP: 200 mW – Indoor use only. With the use of an automatic power control system.
Decision of the SCRF dated December 23, 2022, No. 22-65-05
(https://digital.gov.ru/documents/zasedanie-gkrch-ot-23-dekabrya-2022-g-protokol-№-22-65):
Quoted 9 lines
26. The following amendments shall be made to Annex No. 2 of the Decision of the State Commission for Radio Frequencies (SCRF) dated 07.05.2007 No. 07-20-03-001:
Section 2, “Devices with Direct Sequence Spread Spectrum and Other Types of Modulation,” shall be supplemented with the following entries:
5925-6425 MHz – Maximum EIRP: 200 mW – Indoor use only. With the use of an automatic power control system.
Decision of the SCRF dated September 27, 2023, No. 23-68-03
(https://digital.gov.ru/documents/protokol-gkrch-ot-27-09-2023-№-23-68-data-publikaczii-27-09-2023-2):
Quoted 7 lines
3. On amendments to previously issued SCRF decisions:
3.1. Based on the Use of the Association of Trade Companies and Manufacturers of Electrical Household and Computer Equipment (OGRN 1027700101505), in Annex No. 2 to the SCRF decision dated 07.05.2007 No. 07-20-03-001, the words “With the use of an automatic power control system” shall be replaced with “With the use of LBT2 mode.”
None of the decisions cited above impose a limit of 100 mW, and the previously ambiguous phrase “automatic power control system“ has now been clarified. “LBT2“ is an obvious clerical error, where “2“ was originally a footnote marker, as there is no such thing as the LBT2 mode. I have reported the error to the SCRF.
As far as I know, LBT support is inherent to IEEE 802.11 in the 5/6 GHz range. Correct me if I'm wrong on this.
PART 2 conclusion:
5150 — 5350 MHz 200 mW NO-OUTDOOR
5650 — 5850 MHz 200 mW NO-OUTDOOR
5925 — 6425 MHz 200 mW NO-OUTDOOR
-----
PART 3: the rules for the use of radio access equipment
-----
Additionally, there are rules for the Use of Radio equipment which all Wi-Fi access points connected to public networks must be compliant with. Citations are from the original document and the subsequent amendments.
Order of the Ministry of Communications and Mass Media of the Russian Federation dated 14.09.2010 No. 124 “On the Approval of the Rules for the Use of Radio Access Equipment. Part I. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the 30 MHz to 66 GHz Range“ (https://digital.gov.ru/uploaded/files/pr124-10_1.pdf),
page 62:
Quoted 11 lines
Requirements for radio access equipment of the 802.11n standard
[...]
Maximum transmitter power in the frequency band:
5150 – 5250 MHz no more than 20 dBm (100 mW)
5250 – 5350 MHz no more than 20 dBm (100 mW)
5650 – 5725 MHz no more than 30 dBm (1000 mW)
5725 – 5825 MHz no more than 30 dBm (1000 mW)
5825 – 6425 MHz no more than 30 dBm (1000 mW)
Order of the Ministry of Communications and Mass Media of the Russian Federation dated April 22, 2015, No. 129 “On Amendments to the Rules for the Use of Radio Access Equipment. Part I. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the Frequency Range from 30 MHz to 66 GHz, Approved by Order of the Ministry of Communications and Mass Media of the Russian Federation dated 14.09.2010 No. 124” (http://publication.pravo.gov.ru/document/0001201505180039),
page 25:
Quoted 7 lines
Requirements for radio access equipment of the 802.11ac standard
[...]
Limit values of average EIRP and average spectral power density EIRP when operating at the maximum declared power:
Quoted 7 lines
Frequency range (MHz) | Output average EIRP (dBm) with TPC, without TPC 5 150 – 5 350 | 23, 20/23 (1)
5 470 – 6 425 | 30, 27(1) A value of 20 dBm is applied, except in the case of transmissions for bands that fully fall within the 5150 – 5350 MHz range, in which case a value of 23 dBm is applied.
The footnote is somewhat ambiguous. The distinction seems to lie between discontiguous channel bonding (e.g., 80+80 MHz) and contiguous bonding within the lower channel range.
Order of the Ministry of Digital Development, Communications, and Mass Media of the Russian Federation dated July 6, 2020, No. 321 “On Amendments to the Rules for the Use of Radio Access Equipment. Part 1. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the Frequency Range from 30 MHz to 66 GHz, approved by the Order of the Ministry of Communications and Mass Media of the Russian Federation dated September 14, 2010, No. 124.”
(http://publication.pravo.gov.ru/document/0001202008070002), page 11:
Quoted 7 lines
Requirements for radio access equipment of the 802.11ax standard
[...]
Frequency range (MHz) | Max. transmitter power (dbW) 5150 – 5350 | -10
5650 – 6420 | 0
PART 3 conclusion:
5150 — 5350 MHz 100 mW or more depending on IEEE 802.11 version 5650 — 5850 MHz 200 mW
5925 — 6425 MHz 200 mW
PART 4: proposal
-----
I propose the following changes to wireless-regdb by picking the lowest transmit power value for each frequency range among the three bodies of legal documents cited above.
5150 – 5350 MHz 100 mW NO-OUTDOOR
5650 – 5850 MHz 200 mW NO-OUTDOOR
5925 – 6425 MHz 200 mW NO-OUTDOOR
-----
PART 4: sources for citations
-----
The source currently cited in db.txt
(https://docs.cntd.ru/document/1300597464?section=text) is not from a government-maintained website. It is also limited in scope and doesn't cover all of the relevant regulations. I propose to replace it with a set of different sources, which cover this topic exhaustively, from official government platforms:
Decision of the SCRF dated June 16, 2021, No. 21-58-05
(https://digital.gov.ru/documents/zasedanie-gkrch-ot-16-iyunya-2021-g-protokol-№-21-58)
— contains the most recent
frequencies for 2.4, 5, and 57–66 GHz bands
Decision of the SCRF dated December 23, 2022, No. 22-65-05
(https://digital.gov.ru/documents/zasedanie-gkrch-ot-23-dekabrya-2022-g-protokol-№-22-65)
— 6 GHz band added
Decision of the SCRF dated September 27, 2023, No. 23-68-03
(https://digital.gov.ru/documents/protokol-gkrch-ot-27-09-2023-№-23-68-data-publikaczii-27-09-2023-2)
— reference to LBT added
Order of the Ministry of Communications and Mass Media of the Russian Federation dated 14.09.2010 No. 124 “On the Approval of the Rules for the Use of Radio Access Equipment. Part I. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the 30 MHz to 66 GHz Range“ (https://digital.gov.ru/uploaded/files/pr124-10_1.pdf) — rules for up to IEEE 802.11n
Order of the Ministry of Communications and Mass Media of the Russian Federation dated April 22, 2015, No. 129 “On Amendments to the Rules for the Use of Radio Access Equipment. Part I. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the Frequency Range from 30 MHz to 66 GHz, Approved by Order of the Ministry of Communications and Mass Media of the Russian Federation dated 14.09.2010 No. 124”
(http://publication.pravo.gov.ru/document/0001201505180039) — rules for IEEE 802.11ac and IEEE 802.11ad
Order of the Ministry of Digital Development, Communications, and Mass Media of the Russian Federation dated July 6, 2020, No. 321 “On Amendments to the Rules for the Use of Radio Access Equipment. Part 1. Rules for the Use of Radio Access Equipment for Wireless Data Transmission in the Frequency Range from 30 MHz to 66 GHz, approved by the Order of the Ministry of Communications and Mass Media of the Russian Federation dated September 14, 2010, No. 124.”
(http://publication.pravo.gov.ru/document/0001202008070002) — rules for IEEE 802.11ax
Decree of the Government of the Russian Federation dated July 1, 2024, No. 897 “On Amendments to the Decree of the Government of the Russian Federation dated October 20, 2021, No. 1800”
(http://publication.pravo.gov.ru/document/0001202407010020) — 200 mW transmitters in the 5/6 Wi-Fi range are now exempt from registration
-----
PART 5: sources for research
-----
For research and verification purposes only, up-to-date compilations are provided by law firms:
https://www.consultant.ru/cons/cgi/online.cgi?req=doc&base=EXP&n=834025
(free access from 8 PM to 0 AM, Moscow Time)
https://base.garant.ru/199539/53f89421bbdaf741eb2d1ecc4ddb4c33
Quoted 47 lines · Chen-Yu Tsai
Quoted 8 lines · Louis Kotze
The State Commission for Radio Frequencies (GKRCH) Decision No. 22-65 (December 23, 2022) authorized 6 GHz LPI at 200 mW (23 dBm) EIRP with 10 mW/MHz PSD. The current entry incorrectly uses 100 mW.
Reference:
GKRCH Decision No. 22-65 (2022-12-23)
https://www.eleoscompliance.com/en/article/russia-the-federal-communication-agency-fac-of-russia-allows-6ghz-wifiThis page doesn't actually contain any useful information.
I can't seem to access the reference from the original submission. I'll try again later.
I did find https://www.gccorp.com.tw/en/?p=2173 using the document name you gave, but that also mentions that "automatic power control system" is required. I assume that is TPC, which Linux basically doesn't have. So we still have a problem here. If the rules were based on FCC or EU regulations, then we sort of adopt a 3 dBm reduction in the limit.
ChenYu
Quoted 21 lines
Signed-off-by Louis Kotze <[email protected]>--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)db.txt +1
-2@@ -1772,7 +1772,7 @@ country RU: (2400 - 2483.5 @ 40), (100mW) (5150 - 5350 @ 160), (100 mW), NO-OUTDOOR (5650 - 5850 @ 160), (100 mW), NO-OUTDOOR - (5925 - 6425 @ 160), (100 mW), NO-OUTDOOR + (5925 - 6425 @ 160), (200 mW), NO-OUTDOOR # 60 GHz band channels 1-4, ref: Changes to NLA 124_Order №129_22042015.pdf (57000 - 66000 @ 2160), (40), NO-OUTDOOR --2.53.0
Signature · 2 lines
Best regards Valeriy Kosikhin
Re: Question: Should FCC-region 6 GHz entries use the India PSD methodology?
In reply to Chen-Yu TsaiQuoted 5 lines
The PSD limit is actually -1 dBm/MHz. The device class we consider is 6XD (indoor low power client). This translates to 12.01 dBm at 20 Mhz channel width.
So the current rule in the database is correct.
Thanks for the correction. I was looking at the AP limit (5 dBm/MHz, 15.407(a)(5)) instead of the client limit (-1 dBm/MHz, 15.407(a)(8)). The 12 dBm entries are correct.
Re: [PATCH 4/5] wireless-regdb: Remove incorrect DFS flags for Togo (TG)
In reply to Chen-Yu TsaiQuoted 6 lines · Chen-Yu Tsai
I don't read French, but my translation app says that DFS is required for all bands except the 60 GHz band. I am looking at table 9 - broadband data transmission devices (pages 20-21).
If you're looking at table 3 - non-specific SRDs, then you get a much lower power limit.
You are correct. I was reading table 3 (non-specific SRDs) instead of table 9 (broadband data transmission devices). Table 9 explicitly requires DFS for 2.4 GHz, 5 GHz, and 6 GHz bands.
Dropping this patch. Sorry for the noise.
Louis
Re: [PATCH 3/5] wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
In reply to Chen-Yu TsaiQuoted 1 line · Chen-Yu Tsai
This page doesn't actually contain any useful information.
You are right — the eleoscompliance.com reference was a secondary source and not useful. I have since obtained the primary SCRF documents (shared by Valeriy Kosikhin) and verified them directly.
Quoted 6 lines
I did find https://www.gccorp.com.tw/en/?p=2173 using the document name you gave, but that also mentions that "automatic power control system" is required. I assume that is TPC, which Linux basically doesn't have. So we still have a problem here. If the rules were based on FCC or EU regulations, then we sort of adopt a 3 dBm reduction in the limit.
The TPC concern is resolved. SCRF Decision 23-68-03 (September 27, 2023) replaced the phrase "With the use of an automatic power control system" with "With the use of LBT mode" across all entries in Annex 2 of SCRF 07-20-03-001. This is a literal text substitution (clause 3.1 of 23-68-03). There is no TPC requirement in the current SCRF allocation, so the -3 dBm reduction does not apply here.
LBT as required by ETSI is satisfied by standard 802.11 CCA (Clear Channel Assessment) — the mandatory listen-before-transmit mechanism in the 802.11 MAC layer. ETSI EN 301 893 clause 4.8 establishes this for 5 GHz RLAN, and EN 303 687 for 6 GHz. Linux mac80211 implements CCA in the standard transmit path.
(The SCRF text actually says "LBT2 mode" — Valeriy traced this to a clerical error where a footnote marker "2" was merged into the term during a copy-paste between SCRF decisions 21-60 and 23-68-03. There is no "LBT2" in any technical standard. He has reported the error to the SCRF.)
Verified SCRF allocation values (from primary PDFs):
2400-2483.5 MHz: 100 mW EIRP, no restriction
5150-5350 MHz: 200 mW EIRP, indoor, LBT 5650-5850 MHz: 200 mW EIRP, indoor, LBT 5925-6425 MHz: 200 mW EIRP (LPI), indoor, LBT 57-66 GHz: 40 dBm EIRP, indoor
The current db.txt has 100 mW for all three 5/6 GHz bands. The SCRF allocation shows 200 mW. For 5650-5850 and 5925-6425, all applicable Russian regulations agree on 200 mW — these entries do not reflect the current regulatory limits.
For 5150-5350, there is a complication: the SCRF allocation says 200 mW, but the equipment certification rules (per-standard Orders) cap power at 100 mW for 802.11n (Order 124) and 802.11ax (Order 321). Only 802.11ac (Order 129) allows 200 mW with TPC.
This raises a question I would appreciate your guidance on:
When a country has separate spectrum allocation (200 mW) and per-standard equipment certification rules (100 mW for most standards), should the regdb encode the spectrum allocation ceiling or the most restrictive equipment limit? The ETSI model puts both values in the same standard (EN 301 893: 23 dBm with TPC, 20 dBm without), but Russia has them in different bodies of law.
Full source URLs are in Valeriy's reply in this thread. My v1 was incomplete — it only addressed 5925-6425 and used an inadequate reference. Valeriy is preparing a comprehensive update with lawyer review. We are coordinating on the scope of a v2.
Louis
Re: [PATCH 3/5] wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
Quoted 53 lines · Louis Kotze
Quoted 1 line · Chen-Yu Tsai
This page doesn't actually contain any useful information.
You are right — the eleoscompliance.com reference was a secondary source and not useful. I have since obtained the primary SCRF documents (shared by Valeriy Kosikhin) and verified them directly.
Quoted 6 lines
I did find https://www.gccorp.com.tw/en/?p=2173 using the document name you gave, but that also mentions that "automatic power control system" is required. I assume that is TPC, which Linux basically doesn't have. So we still have a problem here. If the rules were based on FCC or EU regulations, then we sort of adopt a 3 dBm reduction in the limit.
The TPC concern is resolved. SCRF Decision 23-68-03 (September 27, 2023) replaced the phrase "With the use of an automatic power control system" with "With the use of LBT mode" across all entries in Annex 2 of SCRF 07-20-03-001. This is a literal text substitution (clause 3.1 of 23-68-03). There is no TPC requirement in the current SCRF allocation, so the -3 dBm reduction does not apply here.
LBT as required by ETSI is satisfied by standard 802.11 CCA (Clear Channel Assessment) — the mandatory listen-before-transmit mechanism in the 802.11 MAC layer. ETSI EN 301 893 clause 4.8 establishes this for 5 GHz RLAN, and EN 303 687 for 6 GHz. Linux mac80211 implements CCA in the standard transmit path.
(The SCRF text actually says "LBT2 mode" — Valeriy traced this to a clerical error where a footnote marker "2" was merged into the term during a copy-paste between SCRF decisions 21-60 and 23-68-03. There is no "LBT2" in any technical standard. He has reported the error to the SCRF.)
Verified SCRF allocation values (from primary PDFs):
2400-2483.5 MHz: 100 mW EIRP, no restriction
5150-5350 MHz: 200 mW EIRP, indoor, LBT 5650-5850 MHz: 200 mW EIRP, indoor, LBT 5925-6425 MHz: 200 mW EIRP (LPI), indoor, LBT 57-66 GHz: 40 dBm EIRP, indoorThe current db.txt has 100 mW for all three 5/6 GHz bands. The SCRF allocation shows 200 mW. For 5650-5850 and 5925-6425, all applicable Russian regulations agree on 200 mW — these entries do not reflect the current regulatory limits.
For 5150-5350, there is a complication: the SCRF allocation says 200 mW, but the equipment certification rules (per-standard Orders) cap power at 100 mW for 802.11n (Order 124) and 802.11ax (Order 321). Only 802.11ac (Order 129) allows 200 mW with TPC.
Quoted 8 lines
This raises a question I would appreciate your guidance on:
When a country has separate spectrum allocation (200 mW) and per-standard equipment certification rules (100 mW for most standards), should the regdb encode the spectrum allocation ceiling or the most restrictive equipment limit? The ETSI model puts both values in the same standard (EN 301 893: 23 dBm with TPC, 20 dBm without), but Russia has them in different bodies of law.
The most restrictive one. Basically we cannot give the user device any chance of violating the limits (or any other restrictions).
Quoted 4 lines
Full source URLs are in Valeriy's reply in this thread. My v1 was incomplete — it only addressed 5925-6425 and used an inadequate reference. Valeriy is preparing a comprehensive update with lawyer review. We are coordinating on the scope of a v2.
Cool. A full document (such as Valeriy's reply) in the commit log is probably too long. Please try to make it more concise. You can also provide a link to the other reply on lore.kernel.org to provide more context.
ChenYu
Re: [PATCH 3/5] wireless-regdb: Fix 6 GHz LPI power for Russia (RU)
Quoted 2 lines · Chen-Yu Tsai
The most restrictive one. Basically we cannot give the user device any chance of violating the limits (or any other restrictions).
Understood. Thank you for the clear guidance -- I will apply the same principle in future audits.
Quoted 4 lines
A full document (such as Valeriy's reply) in the commit log is probably too long. Please try to make it more concise. You can also provide a link to the other reply on lore.kernel.org to provide more context.
Noted. The v2 commit message is shorter and links to the analysis thread instead of inlining sources.
Valeriy and I have coordinated off-list. He agrees with the most-restrictive rule for 5150-5350 and is happy for me to send v2 now for the two unambiguous bands. He will follow up separately with a source-URL update after the lawyer review he mentioned earlier.
v2 summary:
- 5150-5350 MHz: unchanged, stays at 100 mW
- 5650-5850 MHz: 100 mW -> 200 mW
- 5925-6425 MHz: 100 mW -> 200 mW
- References left unchanged in this patch (Valeriy's follow-up will replace the eleoscompliance.com/cntd.ru pointers with the SCRF primary documents)
v2 sent: https://lore.kernel.org/wireless-regdb/[email protected]/
Louis
Chen-Yu Tsai
AppliedRe: (subset) [PATCH 0/5] wireless-regdb: Fix incorrect entries found during comprehensive audit
In reply to Louis KotzeQuoted 8 lines · Louis Kotze
Following the South Africa (ZA) 6 GHz LPI fix submitted earlier, I audited all 182 countries in wireless-regdb across all WiFi bands (2.4 GHz, 5 GHz, 6 GHz, and 60 GHz), cross-referencing against official regulatory documents.
This series fixes six incorrect entries found during the audit:
[...]
Applied to master in wens/wireless-regdb.git, thanks!
[5/5] wireless-regdb: Fix 60 GHz power unit for Ukraine (UA)
https://git.kernel.org/wens/wireless-regdb/c/d0781152c334
Best regards,
Signature · 1 line
Chen-Yu Tsai <[email protected]>