i.MX6UL LCDIF device model and SoC wiring
Subsystems (2)
v3 cover i.MX6UL LCDIF device model and SoC wiring
From: Yucai Liu <[email protected]>
This series adds a basic i.MX6UL LCDIF device model under hw/display and wires it into the i.MX6UL SoC.
Changes in v3:
- merge the previous "build symbol" patch into the device patch
- drop the unrelated hw/arm/meson.build line-wrap-only change
- fix commit message formatting (use real newlines)
- use 16 KiB for the LCDIF MMIO region size in both device and SoC map
- rework register indexing/storage to match 0x10-spaced register layout
- apply SET/CLR/TOG semantics only to registers that have those aliases
- set CTRL1 reset value to 0x000f0000
- remove redundant 32bpp host-surface check
- move realize-time cleanup to unrealize
Yucai Liu (2):
hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model
MAINTAINERS | 2 + hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 +- hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/arm/fsl-imx6ul.h | 4 +- include/hw/display/imx6ul_lcdif.h | 37 +++ 8 files changed, 511 insertions(+), 3 deletions(-) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h
Signature · 1 line
2.53.0
PATCH v3 1/2 hw/display: Add i.MX6UL LCDIF device model
From: Yucai Liu <[email protected]>
Implement a basic i.MX6UL LCDIF controller model with MMIO registers, frame-done interrupt behavior, and framebuffer-backed display updates for RGB565 and XRGB8888 input formats.
Place the LCDIF device under hw/display and build it via a dedicated CONFIG_IMX6UL_LCDIF symbol. Model register fields with registerfields.h helpers and provide migration support via vmstate.
--- MAINTAINERS | 2 + hw/display/Kconfig | 4 + hw/display/imx6ul_lcdif.c | 453 ++++++++++++++++++++++++++++++ hw/display/meson.build | 1 + include/hw/display/imx6ul_lcdif.h | 37 +++ 5 files changed, 497 insertions(+) create mode 100644 hw/display/imx6ul_lcdif.c create mode 100644 include/hw/display/imx6ul_lcdif.h
MAINTAINERS +2 -0
@@ -895,8 +895,10 @@ L: [email protected] S: Odd Fixes F: hw/arm/mcimx6ul-evk.c F: hw/arm/fsl-imx6ul.c +F: hw/display/imx6ul_lcdif.c F: hw/misc/imx6ul_ccm.c F: include/hw/arm/fsl-imx6ul.h +F: include/hw/display/imx6ul_lcdif.h F: include/hw/misc/imx6ul_ccm.h F: docs/system/arm/mcimx6ul-evk.rst
hw/display/Kconfig +4 -0
@@ -25,6 +25,10 @@ config PL110 bool select FRAMEBUFFER +config IMX6UL_LCDIF + bool + select FRAMEBUFFER + config SII9022 bool depends on I2C
hw/display/imx6ul_lcdif.c new file +453 -0
453 lines not on this page · raw message
hw/display/meson.build +1 -0
@@ -11,6 +11,7 @@ system_ss.add(when: ['CONFIG_VGA_CIRRUS', 'CONFIG_VGA_ISA'], if_true: files('cir system_ss.add(when: 'CONFIG_G364FB', if_true: files('g364fb.c')) system_ss.add(when: 'CONFIG_JAZZ_LED', if_true: files('jazz_led.c')) system_ss.add(when: 'CONFIG_PL110', if_true: files('pl110.c')) +system_ss.add(when: 'CONFIG_IMX6UL_LCDIF', if_true: files('imx6ul_lcdif.c')) system_ss.add(when: 'CONFIG_SII9022', if_true: files('sii9022.c')) system_ss.add(when: 'CONFIG_SSD0303', if_true: files('ssd0303.c')) system_ss.add(when: 'CONFIG_SSD0323', if_true: files('ssd0323.c'))
include/hw/display/imx6ul_lcdif.h new file +37 -0
@@ -0,0 +1,37 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* i.MX6UL LCDIF controller +* +* Copyright (c) 2026 Yucai Liu <[email protected]> +*/ + +#ifndef IMX6UL_LCDIF_H +#define IMX6UL_LCDIF_H + +#include "hw/core/sysbus.h" +#include "qom/object.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_IMX6UL_LCDIF "imx6ul-lcdif" +#define IMX6UL_LCDIF_REGS_NUM ((0x230 >> 4) + 1) +OBJECT_DECLARE_SIMPLE_TYPE(IMX6ULLCDIFState, IMX6UL_LCDIF) + +struct IMX6ULLCDIFState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +MemoryRegionSection fbsection; +qemu_irq irq; +QemuConsole *con; +QEMUTimer *frame_timer; +uint32_t fb_base; +uint32_t src_width; +uint32_t rows; +uint8_t src_bpp; +bool invalidate; +uint32_t regs[IMX6UL_LCDIF_REGS_NUM ]; +}; + +#endif /* IMX6UL_LCDIF_H */
Signature · 1 line
2.53.0
PATCH v3 2/2 hw/arm/fsl-imx6ul: Wire in the LCDIF device model
In reply to Yucai LiuFrom: Yucai Liu <[email protected]>
Instantiate LCDIF as a child object of the i.MX6UL SoC in init and realize it in the SoC realize path before MMIO/IRQ hookup.
Also make FSL_IMX6UL select CONFIG_IMX6UL_LCDIF and map the LCDIF region with a 16 KiB size to match the SoC memory map.
--- hw/arm/Kconfig | 1 + hw/arm/fsl-imx6ul.c | 12 ++++++++++-- include/hw/arm/fsl-imx6ul.h | 4 +++- 3 files changed, 14 insertions(+), 3 deletions(-)
hw/arm/Kconfig +1 -0
@@ -641,6 +641,7 @@ config FSL_IMX6UL imply I2C_DEVICES select A15MPCORE select IMX + select IMX6UL_LCDIF select IMX_FEC select IMX_I2C select IMX_USBPHY
hw/arm/fsl-imx6ul.c +10 -2
@@ -19,6 +19,7 @@#include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/fsl-imx6ul.h" +#include "hw/display/imx6ul_lcdif.h" #include "hw/misc/unimp.h" #include "hw/usb/imx-usb-phy.h" #include "hw/core/boards.h"
@@ -136,6 +137,11 @@ static void fsl_imx6ul_init(Object *obj)object_initialize_child (obj, name, &s->usb[i],TYPE_CHIPIDEA ); } +/* +* LCDIF +*/ +object_initialize_child (obj,"lcdif" , &s->lcdif,TYPE_IMX6UL_LCDIF ); +/* * SDHCIs */
@@ -656,8 +662,10 @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)/* * LCD */ -create_unimplemented_device ("lcdif" ,FSL_IMX6UL_LCDIF_ADDR , -FSL_IMX6UL_LCDIF_SIZE ); +sysbus_realize (SYS_BUS_DEVICE (&s->lcdif), &error_abort); +sysbus_mmio_map (SYS_BUS_DEVICE (&s->lcdif),0 ,FSL_IMX6UL_LCDIF_ADDR ); +sysbus_connect_irq (SYS_BUS_DEVICE (&s->lcdif),0 , +qdev_get_gpio_in (gic,FSL_IMX6UL_LCDIF_IRQ ));/* * CSU
include/hw/arm/fsl-imx6ul.h +3 -1
@@ -33,6 +33,7 @@#include "hw/net/imx_fec.h" #include "hw/usb/chipidea.h" #include "hw/usb/imx-usb-phy.h" +#include "hw/display/imx6ul_lcdif.h" #include "system/memory.h" #include "cpu.h" #include "qom/object.h"
@@ -84,6 +85,7 @@ struct FslIMX6ULState {IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS ];IMXUSBPHYState usbphy[FSL_IMX6UL_NUM_USB_PHYS ];ChipideaState usb[FSL_IMX6UL_NUM_USBS ]; +IMX6ULLCDIFState lcdif;MemoryRegion rom;MemoryRegion caam;MemoryRegion ocram;
@@ -143,7 +145,7 @@ enum FslIMX6ULMemoryMap {FSL_IMX6UL_PXP_SIZE = (16 * KiB),FSL_IMX6UL_LCDIF_ADDR =0x021C8000 , -FSL_IMX6UL_LCDIF_SIZE =0x100 , +FSL_IMX6UL_LCDIF_SIZE = (16 * KiB),FSL_IMX6UL_CSI_ADDR =0x021C4000 , FSL_IMX6UL_CSI_SIZE = 0x100,
Signature · 1 line
2.53.0
Peter Maydell
AppliedQuoted 17 lines · Yucai Liu
From: Yucai Liu <[email protected]>
This series adds a basic i.MX6UL LCDIF device model under hw/display and wires it into the i.MX6UL SoC.
Changes in v3:
- merge the previous "build symbol" patch into the device patch
- drop the unrelated hw/arm/meson.build line-wrap-only change
- fix commit message formatting (use real newlines)
- use 16 KiB for the LCDIF MMIO region size in both device and SoC map
- rework register indexing/storage to match 0x10-spaced register layout
- apply SET/CLR/TOG semantics only to registers that have those aliases
- set CTRL1 reset value to0x000f0000
- remove redundant 32bpp host-surface check
- move realize-time cleanup to unrealize
Quoted 3 lines
Yucai Liu (2):
hw/display: Add i.MX6UL LCDIF device model hw/arm/fsl-imx6ul: Wire in the LCDIF device model
Applied to target-arm.next, thanks.
-- PMM