systemd: add osc-context PACKAGECONFIG
PATCH 1/1 systemd: add osc-context PACKAGECONFIG
From: Chen Qi <[email protected]>
Add a new PACKAGECONFIG to give users the choice of whether to have /etc/profile.d/80-systemd-osc-context.sh file or not.
This is because the /etc/profile.d/80-systemd-osc-context.sh[1] is setting PS0 with OSC 3008 standard[2]. If a terminal (e.g., minicom) cannot deal with this OSC 3008 standard, it will just output the whole contents. This is quite annoying. See example output below:
3008;start=9c578e41-1a0f-4b47-9a87-ab22adebe376;machineid=cc467af9bedc4d98a437e5d744928301;...
Below are steps of how to reproduce the issue with qemu:
1. IMAGE_INSTALL:append = " bash"
2. bitbake core-image-minimal
3. runqemu snapshot kvm nographic qemuparams="-serial pty"
4. minicom -D /dev/pts/X -b 115200 (/dev/pts/X is the one printed in the step 3)
5. [In minicom] type any command or just type "Enter" key
A new PR is also created for systemd upstream:
https://github.com/systemd/systemd/pull/41647
If systemd accepts the PR, we can then use the new option. Otherwise, we'll need to keep the way it is now.
[1] https://github.com/systemd/systemd/commit/dadbb34919abd3fefeb5b8ccc9794da9398a2503
[2] https://uapi-group.org/specifications/specs/osc_context/
--- meta/recipes-core/systemd/systemd_259.5.bb | 9 +++++++++ 1 file changed, 9 insertions(+)
meta/recipes-core/systemd/systemd_259.5.bb +9 -0
@@ -67,6 +67,7 @@ PACKAGECONFIG ??= " \ nss \ nss-mymachines \ nss-resolve \ + osc-context \ quotacheck \ randomseed \ resolved \
@@ -161,6 +162,7 @@ PACKAGECONFIG[no-ntp-fallback] = "-Dntp-servers=" PACKAGECONFIG[nss] = "-Dnss-systemd=true,-Dnss-systemd=false,,libnss-systemd" PACKAGECONFIG[nss-mymachines] = "-Dnss-mymachines=enabled,-Dnss-mymachines=disabled" PACKAGECONFIG[nss-resolve] = "-Dnss-resolve=enabled,-Dnss-resolve=disabled,,libnss-resolve" +PACKAGECONFIG[osc-context] = ",,," PACKAGECONFIG[oomd] = "-Doomd=true,-Doomd=false" PACKAGECONFIG[openssl] = "-Dopenssl=enabled,-Dopenssl=disabled,openssl" PACKAGECONFIG[p11kit] = "-Dp11kit=enabled,-Dp11kit=disabled,p11-kit"
@@ -273,6 +275,13 @@ do_install() { find ${D} -name \*getty-generator\* -delete fi + if ! ${@bb.utils.contains('PACKAGECONFIG', 'osc-context', 'true', 'false', d)}; then + # Ensure there's no /etc/profile.d/80-systemd-osc-context.sh. + # Some programs such as minicom does not support this OSC 3008 standard. + rm -f ${D}${sysconfdir}/profile.d/80-systemd-osc-context.sh + rm -f ${D}${nonarch_libdir}/tmpfiles.d/20-systemd-osc-context.conf + fi + # Provide support for initramfs [ ! -e ${D}/init ] && ln -s ${nonarch_libdir}/systemd/systemd ${D}/init [ ! -e ${D}/${base_sbindir}/udevd ] && ln -s ${nonarch_libdir}/systemd/systemd-udevd ${D}/${base_sbindir}/udevd
Signature · 1 line
2.34.1
Quoted 24 lines · On Wed, 2026-04-15 at 16:29 +0800, [email protected] wrote:
From: Chen Qi <[email protected]>
Add a new PACKAGECONFIG to give users the choice of whether to have
/etc/profile.d/80-systemd-osc-context.shfile or not.This is because the /etc/profile.d/80-systemd-osc-context.sh[1] is setting PS0 with OSC 3008 standard[2]. If a terminal (e.g., minicom) cannot deal with this OSC 3008 standard, it will just output the whole contents. This is quite annoying. See example output below:
3008;start=9c578e41-1a0f-4b47-9a87-ab22adebe376;machineid=cc467af9bedc4d98a437e5d744928301;...
Below are steps of how to reproduce the issue with qemu:
1. IMAGE_INSTALL:append = " bash"
2. bitbake core-image-minimal
3. runqemu snapshot kvm nographic qemuparams="-serial pty"
4. minicom -D/dev/pts/X-b 115200 (/dev/pts/Xis the one printed in the step 3)
5. [In minicom] type any command or just type "Enter" keyA new PR is also created for systemd upstream:
https://github.com/systemd/systemd/pull/41647
If systemd accepts the PR, we can then use the new option. Otherwise, we'll need to keep the way it is now.
Quoted 4 lines
[1] https://github.com/systemd/systemd/commit/dadbb34919abd3fefeb5b8ccc9794da9398a2503
[2] https://uapi-group.org/specifications/specs/osc_context/Signed-off-by Chen Qi <[email protected]>
I think the best way to solve this problem is to set TERM for the serial port in question, perhaps to something like vt100 if you expect to be connecting with minicom. That would have to be hardcoded in the inittab or relevant systemd unit file as there's no negotiation of terminal type when connecting over serial.
The 80-systemd-osc-context.sh script in systemd also needs modification, it assumes that anything other than TERM=dumb can support OSC 3008 messages. We all know TERM and terminfo is a mess, but it's equally messy to just assume support for features like this.
Adding a PACKAGECONFIG and/or an option to the systemd build system to control whether this is installed is not a good solution - a target system may have multiple types of terminal in use, some of which do support OSC 3008.
Best regards,
Signature · 1 line
Paul Barker
Hi Paul,
The purpose of this patch is to give vendors/distributions an easy way to disable installing the file. Distributions can put something like PACKAGECONFIG:remove:pn-systemd = "osc-context" in their distro conf file.
We have looked into this problem so we know what's going on and how to handle it. But how do we convey this information properly to users. Users get this messy output from console and they have negative impression about your product before they go to any doc.
I like systemd pioneering things, but for the current status, I guess most embedded systems will not benefit from this PS0 setting.
The net effect will be relatively negative. Users get messy output from console in some case. They get it every time they type a command or just the "Enter" key. And they get annoyed. I got this feedback from two very experienced BSP developers, separately.
So could you please give this patch a second thought? I also think disabling this PACKAGECONFIG for oe-core is a more reasonable default. What do you think?
Regards,
Qi
-----Original Message-----
From: Paul Barker <[email protected]>
Sent: Wednesday, April 15, 2026 5:36 PM
To: Chen, Qi <[email protected]>; [email protected]
Cc: [email protected]
Subject: Re: [OE-core][PATCH] systemd: add osc-context PACKAGECONFIG
Quoted 25 lines · On Wed, 2026-04-15 at 16:29 +0800, [email protected] wrote:
From: Chen Qi <[email protected]>
Add a new PACKAGECONFIG to give users the choice of whether to have
/etc/profile.d/80-systemd-osc-context.shfile or not.This is because the /etc/profile.d/80-systemd-osc-context.sh[1] is setting
PS0 with OSC 3008 standard[2]. If a terminal (e.g., minicom) cannot deal with this OSC 3008 standard, it will just output the whole contents. This is quite annoying. See example output below:3008;start=9c578e41-1a0f-4b47-9a87-ab22adebe376;machineid=cc467af9bedc4d98a437e5d744928301;...
Below are steps of how to reproduce the issue with qemu:
1. IMAGE_INSTALL:append = " bash"
2. bitbake core-image-minimal
3. runqemu snapshot kvm nographic qemuparams="-serial pty"
4. minicom -D/dev/pts/X-b 115200 (/dev/pts/Xis the one printed in the step 3) 5. [In minicom] type any command or just type "Enter" keyA new PR is also created for systemd upstream:
https://github.com/systemd/systemd/pull/41647
If systemd accepts the PR, we can then use the new option. Otherwise, we'll need to keep the way it is now.
Quoted 6 lines
[1]
https://github.com/systemd/systemd/commit/dadbb34919abd3fefeb5b8ccc9794da9398a2503[2]
https://uapi-group.org/specifications/specs/osc_context/Signed-off-by Chen Qi <[email protected]>
I think the best way to solve this problem is to set TERM for the serial port in question, perhaps to something like vt100 if you expect to be connecting with minicom. That would have to be hardcoded in the inittab or relevant systemd unit file as there's no negotiation of terminal type when connecting over serial.
The 80-systemd-osc-context.sh script in systemd also needs modification, it assumes that anything other than TERM=dumb can support OSC 3008 messages. We all know TERM and terminfo is a mess, but it's equally messy to just assume support for features like this.
Adding a PACKAGECONFIG and/or an option to the systemd build system to control whether this is installed is not a good solution - a target system may have multiple types of terminal in use, some of which do support OSC 3008.
Best regards,
--
Paul Barker
Quoted 5 lines · Qi
Hi Paul,
The purpose of this patch is to give vendors/distributions an easy way to disable installing the file. Distributions can put something like PACKAGECONFIG:remove:pn-systemd = "osc-context" in their distro conf file.
Quoted 8 lines
We have looked into this problem so we know what's going on and how to handle it. But how do we convey this information properly to users. Users get this messy output from console and they have negative impression about your product before they go to any doc.
I like systemd pioneering things, but for the current status, I guess most embedded systems will not benefit from this PS0 setting.
The net effect will be relatively negative. Users get messy output from console in some case. They get it every time they type a command or just the "Enter" key. And they get annoyed. I got this feedback from two very experienced BSP developers, separately.So could you please give this patch a second thought? I also think disabling this PACKAGECONFIG for oe-core is a more reasonable default. What do you think?
Hi Qi,
Thanks for the additional info.
I don't really like this approach, I'd prefer a "proper" fix in systemd and/or inittab, but that isn't likely to happen quickly. So as a compromise, yes, we should take this patch for now.
Best regards,
Signature · 1 line
Paul Barker
Thank you both, I can confirm that the introduced PACKAGECONFIG works as intended.
Regards,
Martin