Skip to contentSkip to conversation

This is version 2 of the RZ/G2L support.

PATCH Superseded Michele Bisogno 1 participant 3 messages Apr 17

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover This is version 2 of the RZ/G2L support.

This is version 2 of the RZ/G2L SoC support for the Renesas USBHS gadget driver.

Changes since v1:

Split regulator changes into a separate patch.

Refined FIFO PIO logic for better alignment handling.

Technical Justification:
While the Linux driver for RZ/G2L relies on DMA, this U-Boot implementation focuses on the PIO path. The refactoring in fifo.c to use byte-level access (ioread8/iowrite8) is necessary to handle trailing bytes and alignment requirements specific to the RZ/G2L bus.

Additionally, explicit reset deassertion is added to the probe sequence, and a re-entrancy fix (usb_del_gadget_udc) is included to prevent crashes during repeated executions of gadget commands like 'ums'.

Michele Bisogno (2):
regulator: rzg2l: implement connectivity notification
usb: gadget: renesas: add support for RZ/G2L SoC

 .../power/regulator/rzg2l-usbphy-regulator.c  | 10 ++++++--
 drivers/usb/gadget/rcar/common.c              | 15 ++++++++++++
 drivers/usb/gadget/rcar/fifo.c                | 23 +++++++++++--------
 3 files changed, 36 insertions(+), 12 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/2 regulator: rzg2l: implement connectivity notification

Implement CON_CTRL manual connectivity notification.
By setting SEL_CONNECT and CONNECT_1, the UTM+ core is notified of connection status in peripheral mode.

---
 drivers/power/regulator/rzg2l-usbphy-regulator.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/power/regulator/rzg2l-usbphy-regulator.c +8 -2
index 0354555d0b5..03f8dec4f08 100644
@@ -9,16 +9,22 @@
 #include <renesas/rzg2l-usbphy.h>
 
 #define VBENCTL			0x03c
+#define CON_CTRL		0x020
 #define VBENCTL_VBUS_SEL	BIT(0)
+#define SEL_CONNECT		BIT(4)
+#define CONNECT_1		BIT(0)
 
 static int rzg2l_usbphy_regulator_set_enable(struct udevice *dev, bool enable)
 {
 	struct rzg2l_usbphy_ctrl_priv *priv = dev_get_priv(dev->parent);
 
-	if (enable)
+	if (enable) {
 		clrbits_le32(priv->regs + VBENCTL, VBENCTL_VBUS_SEL);
-	else
+		setbits_le32(priv->regs + CON_CTRL, SEL_CONNECT | CONNECT_1);
+	} else {
 		setbits_le32(priv->regs + VBENCTL, VBENCTL_VBUS_SEL);
+		clrbits_le32(priv->regs + CON_CTRL, SEL_CONNECT | CONNECT_1);
+	}
 
 	return 0;
 }
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 2/2 usb: gadget: renesas: add support for RZ/G2L SoC

In reply to Michele Bisogno

common: Add "renesas,rzg2l-usbhs" compatible and support reset deassertion. Fix a re-entrancy bug by calling usb_del_gadget_udc() in the remove callback to prevent stale UDC list entries.
fifo: Refactor PIO push/pop logic to handle trailing bytes using iowrite8/ioread8. This ensures correct data alignment on RZ/G2L and simplifies the data transfer loop.

---
 drivers/usb/gadget/rcar/common.c | 15 +++++++++++++++
 drivers/usb/gadget/rcar/fifo.c   | 23 +++++++++++++----------
 2 files changed, 28 insertions(+), 10 deletions(-)
drivers/usb/gadget/rcar/common.c +15 -0
index 2ba022a3f2c..1f266ae5ac9 100644
@@ -16,6 +16,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <usb.h>
+#include <reset.h>
 
 #include "common.h"
 
@@ -397,6 +398,7 @@ static int usbhs_udc_otg_probe(struct udevice *dev)
 	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
 	struct usb_gadget *gadget;
 	struct clk_bulk clk_bulk;
+	struct reset_ctl_bulk reset_bulk;
 	int ret = -EINVAL;
 
 	priv->base = dev_read_addr_ptr(dev);
@@ -411,6 +413,14 @@ static int usbhs_udc_otg_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
+	ret = reset_get_bulk(dev, &reset_bulk);
+	if (ret)
+		return ret;
+
+	ret = reset_deassert_bulk(&reset_bulk);
+	if (ret)
+		return ret;
+
 	clrsetbits_le32(priv->base + UGCTRL2, UGCTRL2_USB0SEL_MASK, UGCTRL2_USB0SEL_EHCI);
 	clrsetbits_le16(priv->base + LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
 
@@ -447,7 +457,11 @@ err_clk:
 static int usbhs_udc_otg_remove(struct udevice *dev)
 {
 	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
+	struct usb_gadget *gadget;
 
+	gadget = usbhsg_get_gadget(&priv->usbhs_priv);
+	if (gadget)
+		usb_del_gadget_udc(gadget);
 	usbhs_rcar3_power_ctrl(&priv->usbhs_priv, false);
 	usbhs_mod_remove(&priv->usbhs_priv);
 	usbhs_fifo_remove(&priv->usbhs_priv);
@@ -460,6 +474,7 @@ static int usbhs_udc_otg_remove(struct udevice *dev)
 
 static const struct udevice_id usbhs_udc_otg_ids[] = {
 	{ .compatible = "renesas,rcar-gen3-usbhs" },
+	{ .compatible = "renesas,rzg2l-usbhs"},
 	{},
 };
 
drivers/usb/gadget/rcar/fifo.c +13 -10
index 6016b2987d5..b5340b4d860 100644
@@ -535,18 +535,21 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
 	 * 32-bit access only
 	 */
 	if (len >= 4 && !((unsigned long)buf & 0x03)) {
-		iowrite32_rep(addr, buf, len / 4);
-		len %= 4;
-		buf += total_len - len;
+		int words = len / 4;
+
+		iowrite32_rep(addr, buf, words);
+		buf += (words * 4);
+		len -= (words * 4);
 	}
 
 	/* the rest operation */
-	if (usbhs_get_dparam(priv, cfifo_byte_addr)) {
-		for (i = 0; i < len; i++)
-			iowrite8(buf[i], addr + (i & 0x03));
-	} else {
-		for (i = 0; i < len; i++)
-			iowrite8(buf[i], addr + (0x03 - (i & 0x03)));
+	if (len > 0) {
+		if (len == 2 && !((unsigned long)buf & 0x01)) {
+			iowrite16(*(u16 *)buf, addr);
+		} else {
+			for (i = 0; i < len; i++)
+				iowrite8(buf[i], addr);
+		}
 	}
 
 	/*
@@ -716,7 +719,7 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
 		if (!(i & 0x03))
 			data = ioread32(addr);
 
-		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
+		buf[i] = ioread8(addr);
 	}
 
 usbhs_fifo_read_end:
Signature · 1 line
2.34.1