net: remove unused ATM protocols and legacy ATM device drivers
Subsystems (8)
Jakub Kicinski
maintainerPATCH v2 1/1 net: remove unused ATM protocols and legacy ATM device drivers
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.
Removed ATM protocol modules:
- net/atm/clip.c - Classical IP over ATM (RFC 2225)
- net/atm/lec.c - LAN Emulation Client (LANE)
- net/atm/mpc.c, mpoa_caches.c, mpoa_proc.c - Multi-Protocol Over ATM
Removed PCI/SBUS ATM device drivers (drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY library
Also clean up references in:
- net/bridge/ - remove ATM LANE hook (br_fdb_test_addr_hook, br_fdb_test_addr)
- net/core/dev.c - remove br_fdb_test_addr_hook export
- defconfig files - remove ATM driver config options
The removed code is moved to an out-of-tree module package (mod-orphan).
---
v2:
- keep BR2684
- correct the claim that Traverse Technologies is defunct, I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
v1: https://lore.kernel.org/[email protected]
--- MAINTAINERS | 3 +- Documentation/.renames.txt | 2 - .../device_drivers/atm/fore200e.rst | 66 - .../networking/device_drivers/atm/index.rst | 2 - .../networking/device_drivers/atm/iphase.rst | 193 - drivers/atm/Kconfig | 325 -- drivers/net/Kconfig | 2 - net/atm/Kconfig | 37 - drivers/Makefile | 1 - drivers/atm/Makefile | 32 - net/atm/Makefile | 4 - drivers/atm/eni.h | 136 - drivers/atm/fore200e.h | 973 ----- drivers/atm/he.h | 845 ---- drivers/atm/idt77105.h | 92 - drivers/atm/idt77252.h | 816 ---- drivers/atm/idt77252_tables.h | 781 ---- drivers/atm/iphase.h | 1452 ------- drivers/atm/midway.h | 266 -- drivers/atm/nicstar.h | 759 ---- drivers/atm/suni.h | 242 -- drivers/atm/tonga.h | 21 - drivers/atm/zeprom.h | 35 - net/atm/lec.h | 155 - net/atm/lec_arpc.h | 97 - net/atm/mpc.h | 65 - net/atm/mpoa_caches.h | 99 - net/bridge/br_private.h | 4 - drivers/atm/adummy.c | 202 - drivers/atm/atmtcp.c | 513 --- drivers/atm/eni.c | 2321 ---------- drivers/atm/fore200e.c | 3012 ------------- drivers/atm/he.c | 2861 ------------- drivers/atm/idt77105.c | 376 -- drivers/atm/idt77252.c | 3797 ----------------- drivers/atm/iphase.c | 3283 -------------- drivers/atm/lanai.c | 2603 ----------- drivers/atm/nicstar.c | 2759 ------------ drivers/atm/nicstarmac.c | 244 -- drivers/atm/solos-attrlist.c | 83 - drivers/atm/solos-pci.c | 1496 ------- drivers/atm/suni.c | 391 -- net/atm/clip.c | 960 ----- net/atm/lec.c | 2274 ---------- net/atm/mpc.c | 1538 ------- net/atm/mpoa_caches.c | 565 --- net/atm/mpoa_proc.c | 307 -- net/bridge/br.c | 7 - net/bridge/br_fdb.c | 29 - net/core/dev.c | 7 - arch/arm/configs/ixp4xx_defconfig | 5 - arch/mips/configs/gpr_defconfig | 13 - arch/mips/configs/mtx1_defconfig | 13 - arch/powerpc/configs/ppc6xx_defconfig | 9 - drivers/atm/.gitignore | 5 - drivers/atm/nicstarmac.copyright | 61 - 56 files changed, 2 insertions(+), 37237 deletions(-) delete mode 100644 Documentation/networking/device_drivers/atm/fore200e.rst delete mode 100644 Documentation/networking/device_drivers/atm/iphase.rst delete mode 100644 drivers/atm/Kconfig delete mode 100644 drivers/atm/Makefile delete mode 100644 drivers/atm/eni.h delete mode 100644 drivers/atm/fore200e.h delete mode 100644 drivers/atm/he.h delete mode 100644 drivers/atm/idt77105.h delete mode 100644 drivers/atm/idt77252.h delete mode 100644 drivers/atm/idt77252_tables.h delete mode 100644 drivers/atm/iphase.h delete mode 100644 drivers/atm/midway.h delete mode 100644 drivers/atm/nicstar.h delete mode 100644 drivers/atm/suni.h delete mode 100644 drivers/atm/tonga.h delete mode 100644 drivers/atm/zeprom.h delete mode 100644 net/atm/lec.h delete mode 100644 net/atm/lec_arpc.h delete mode 100644 net/atm/mpc.h delete mode 100644 net/atm/mpoa_caches.h delete mode 100644 drivers/atm/adummy.c delete mode 100644 drivers/atm/atmtcp.c delete mode 100644 drivers/atm/eni.c delete mode 100644 drivers/atm/fore200e.c delete mode 100644 drivers/atm/he.c delete mode 100644 drivers/atm/idt77105.c delete mode 100644 drivers/atm/idt77252.c delete mode 100644 drivers/atm/iphase.c delete mode 100644 drivers/atm/lanai.c delete mode 100644 drivers/atm/nicstar.c delete mode 100644 drivers/atm/nicstarmac.c delete mode 100644 drivers/atm/solos-attrlist.c delete mode 100644 drivers/atm/solos-pci.c delete mode 100644 drivers/atm/suni.c delete mode 100644 net/atm/clip.c delete mode 100644 net/atm/lec.c delete mode 100644 net/atm/mpc.c delete mode 100644 net/atm/mpoa_caches.c delete mode 100644 net/atm/mpoa_proc.c delete mode 100644 drivers/atm/.gitignore delete mode 100644 drivers/atm/nicstarmac.copyright
MAINTAINERS +2 -1
@@ -4156,11 +4156,12 @@ L: [email protected] (moderated for non-subscribers) L: [email protected] S: Maintained W: http://linux-atm.sourceforge.net -F: drivers/atm/ +F: drivers/usb/atm/ F: include/linux/atm* F: include/linux/sonet.h F: include/uapi/linux/atm* F: include/uapi/linux/sonet.h +F: net/atm/ ATMEL MACB ETHERNET DRIVER M: Nicolas Ferre <[email protected]>
Documentation/.renames.txt +0 -2
@@ -836,14 +836,12 @@ networking/e100 networking/device_drivers/ethernet/intel/e100 networking/e1000 networking/device_drivers/ethernet/intel/e1000 networking/e1000e networking/device_drivers/ethernet/intel/e1000e networking/fm10k networking/device_drivers/ethernet/intel/fm10k -networking/fore200e networking/device_drivers/atm/fore200e networking/hinic networking/device_drivers/ethernet/huawei/hinic networking/i40e networking/device_drivers/ethernet/intel/i40e networking/iavf networking/device_drivers/ethernet/intel/iavf networking/ice networking/device_drivers/ethernet/intel/ice networking/igb networking/device_drivers/ethernet/intel/igb networking/igbvf networking/device_drivers/ethernet/intel/igbvf -networking/iphase networking/device_drivers/atm/iphase networking/ixgbe networking/device_drivers/ethernet/intel/ixgbe networking/ixgbevf networking/device_drivers/ethernet/intel/ixgbevf networking/netdev-FAQ process/maintainer-netdev
Documentation/networking/device_drivers/atm/fore200e.rst deleted +0 -66
66 lines not on this page · raw message
Documentation/networking/device_drivers/atm/index.rst +0 -2
@@ -9,5 +9,3 @@ Asynchronous Transfer Mode (ATM) Device Drivers :maxdepth: 2 cxacru - fore200e - iphase
Documentation/networking/device_drivers/atm/iphase.rst deleted +0 -193
193 lines not on this page · raw message
drivers/atm/Kconfig deleted +0 -325
325 lines not on this page · raw message
drivers/net/Kconfig +0 -2
@@ -501,8 +501,6 @@ config SUNGEM_PHY source "drivers/net/arcnet/Kconfig" -source "drivers/atm/Kconfig" - source "drivers/net/caif/Kconfig" source "drivers/net/dsa/Kconfig"
net/atm/Kconfig +0 -37
@@ -19,43 +19,6 @@ config ATM of ATM. See the file <file:Documentation/networking/atm.rst> for further details. -config ATM_CLIP - tristate "Classical IP over ATM" - depends on ATM && INET - help - Classical IP over ATM for PVCs and SVCs, supporting InARP and - ATMARP. If you want to communication with other IP hosts on your ATM - network, you will typically either say Y here or to "LAN Emulation - (LANE)" below. - -config ATM_CLIP_NO_ICMP - bool "Do NOT send ICMP if no neighbour" - depends on ATM_CLIP - help - Normally, an "ICMP host unreachable" message is sent if a neighbour - cannot be reached because there is no VC to it in the kernel's - ATMARP table. This may cause problems when ATMARP table entries are - briefly removed during revalidation. If you say Y here, packets to - such neighbours are silently discarded instead. - -config ATM_LANE - tristate "LAN Emulation (LANE) support" - depends on ATM - help - LAN Emulation emulates services of existing LANs across an ATM - network. Besides operating as a normal ATM end station client, Linux - LANE client can also act as an proxy client bridging packets between - ELAN and Ethernet segments. You need LANE if you want to try MPOA. - -config ATM_MPOA - tristate "Multi-Protocol Over ATM (MPOA) support" - depends on ATM && INET && ATM_LANE!=n - help - Multi-Protocol Over ATM allows ATM edge devices such as routers, - bridges and ATM attached hosts establish direct ATM VCs across - subnetwork boundaries. These shortcut connections bypass routers - enhancing overall network performance. - config ATM_BR2684 tristate "RFC1483/2684 Bridged protocols" depends on ATM && INET
drivers/Makefile +0 -1
@@ -90,7 +90,6 @@ obj-$(CONFIG_SPMI) += spmi/ obj-$(CONFIG_HSI) += hsi/ obj-$(CONFIG_SLIMBUS) += slimbus/ obj-y += net/ -obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ obj-y += firewire/ obj-$(CONFIG_UIO) += uio/
drivers/atm/Makefile deleted +0 -32
@@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Linux network (ATM) device drivers. -# - -fore_200e-y := fore200e.o - -obj-$(CONFIG_ATM_NICSTAR) += nicstar.o -obj-$(CONFIG_ATM_IA) += iphase.o suni.o -obj-$(CONFIG_ATM_FORE200E) += fore_200e.o -obj-$(CONFIG_ATM_ENI) += eni.o suni.o -obj-$(CONFIG_ATM_IDT77252) += idt77252.o -obj-$(CONFIG_ATM_SOLOS) += solos-pci.o - -ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y) - obj-$(CONFIG_ATM_NICSTAR) += suni.o -endif -ifeq ($(CONFIG_ATM_NICSTAR_USE_IDT77105),y) - obj-$(CONFIG_ATM_NICSTAR) += idt77105.o -endif -ifeq ($(CONFIG_ATM_IDT77252_USE_SUNI),y) - obj-$(CONFIG_ATM_IDT77252) += suni.o -endif - -obj-$(CONFIG_ATM_DUMMY) += adummy.o -obj-$(CONFIG_ATM_TCP) += atmtcp.o -obj-$(CONFIG_ATM_LANAI) += lanai.o - -obj-$(CONFIG_ATM_HE) += he.o -ifeq ($(CONFIG_ATM_HE_USE_SUNI),y) - obj-$(CONFIG_ATM_HE) += suni.o -endif
net/atm/Makefile +0 -4
@@ -4,13 +4,9 @@ # atm-y := addr.o pvc.o signaling.o svc.o ioctl.o common.o atm_misc.o raw.o resources.o atm_sysfs.o -mpoa-objs := mpc.o mpoa_caches.o mpoa_proc.o obj-$(CONFIG_ATM) += atm.o -obj-$(CONFIG_ATM_CLIP) += clip.o obj-$(CONFIG_ATM_BR2684) += br2684.o atm-$(CONFIG_PROC_FS) += proc.o -obj-$(CONFIG_ATM_LANE) += lec.o -obj-$(CONFIG_ATM_MPOA) += mpoa.o obj-$(CONFIG_PPPOATM) += pppoatm.o
drivers/atm/eni.h deleted +0 -136
136 lines not on this page · raw message
drivers/atm/fore200e.h deleted +0 -973
973 lines not on this page · raw message
drivers/atm/he.h deleted +0 -845
845 lines not on this page · raw message
drivers/atm/idt77105.h deleted +0 -92
92 lines not on this page · raw message
drivers/atm/idt77252.h deleted +0 -816
235 lines not on this page · raw message
drivers/atm/idt77252_tables.h deleted +0 -781
781 lines not on this page · raw message
drivers/atm/iphase.h deleted +0 -1452
1,452 lines not on this page · raw message
drivers/atm/midway.h deleted +0 -266
266 lines not on this page · raw message
drivers/atm/nicstar.h deleted +0 -759
759 lines not on this page · raw message
drivers/atm/suni.h deleted +0 -242
242 lines not on this page · raw message
net/atm/lec.h deleted +0 -155
155 lines not on this page · raw message
net/atm/lec_arpc.h deleted +0 -97
97 lines not on this page · raw message
net/atm/mpc.h deleted +0 -65
65 lines not on this page · raw message
net/atm/mpoa_caches.h deleted +0 -99
99 lines not on this page · raw message
drivers/atm/adummy.c deleted +0 -202
202 lines not on this page · raw message
drivers/atm/atmtcp.c deleted +0 -513
513 lines not on this page · raw message
drivers/atm/eni.c deleted +0 -2321
2,321 lines not on this page · raw message
drivers/atm/fore200e.c deleted +0 -3012
3,012 lines not on this page · raw message
drivers/atm/he.c deleted +0 -2861
2,861 lines not on this page · raw message
drivers/atm/idt77105.c deleted +0 -376
376 lines not on this page · raw message
drivers/atm/idt77252.c deleted +0 -3797
3,797 lines not on this page · raw message
drivers/atm/iphase.c deleted +0 -3283
3,283 lines not on this page · raw message
drivers/atm/lanai.c deleted +0 -2603
2,603 lines not on this page · raw message
drivers/atm/nicstar.c deleted +0 -2759
2,759 lines not on this page · raw message
drivers/atm/nicstarmac.c deleted +0 -244
244 lines not on this page · raw message
drivers/atm/solos-attrlist.c deleted +0 -83
83 lines not on this page · raw message
drivers/atm/solos-pci.c deleted +0 -1496
1,496 lines not on this page · raw message
drivers/atm/suni.c deleted +0 -391
391 lines not on this page · raw message
net/atm/clip.c deleted +0 -960
960 lines not on this page · raw message
net/atm/lec.c deleted +0 -2274
2,274 lines not on this page · raw message
net/atm/mpc.c deleted +0 -1538
1,538 lines not on this page · raw message
net/atm/mpoa_caches.c deleted +0 -565
565 lines not on this page · raw message
net/atm/mpoa_proc.c deleted +0 -307
307 lines not on this page · raw message
drivers/atm/nicstarmac.copyright deleted +0 -61
61 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.53.0
Part of the diff is not shown here. View the raw message.
Quoted 67 lines · Jakub Kicinski
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (
drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.Removed ATM protocol modules:
-net/atm/clip.c- Classical IP over ATM (RFC 2225)
-net/atm/lec.c- LAN Emulation Client (LANE)
-net/atm/mpc.c,mpoa_caches.c,mpoa_proc.c- Multi-Protocol Over ATMRemoved PCI/SBUS ATM device drivers (
drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY libraryAlso clean up references in:
-net/bridge/- remove ATM LANE hook (br_fdb_test_addr_hook,br_fdb_test_addr)
-net/core/dev.c- removebr_fdb_test_addr_hookexport
- defconfig files - remove ATM driver config optionsThe removed code is moved to an out-of-tree module package (mod-orphan).
Signed-off-by Jakub Kicinski <[email protected]>---
v2:
- keep BR2684
- correct the claim that Traverse Technologies is defunct, I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
v1: https://lore.kernel.org/[email protected]
Quoted 8 lines
P.S.
Since it's almost removal and it will go via netdev tree (same tree you are maintaining, I suppose) the -D would have a big help to review the changes (and not see removals at all, as 32k lines of one email is too much).
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 34 lines · Jakub Kicinski
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (
drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.Removed ATM protocol modules:
-net/atm/clip.c- Classical IP over ATM (RFC 2225)
-net/atm/lec.c- LAN Emulation Client (LANE)
-net/atm/mpc.c,mpoa_caches.c,mpoa_proc.c- Multi-Protocol Over ATMRemoved PCI/SBUS ATM device drivers (
drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY libraryAlso clean up references in:
-net/bridge/- remove ATM LANE hook (br_fdb_test_addr_hook,br_fdb_test_addr)
-net/core/dev.c- removebr_fdb_test_addr_hookexport
- defconfig files - remove ATM driver config optionsThe removed code is moved to an out-of-tree module package (mod-orphan).
Signed-off-by Jakub Kicinski <[email protected]>
Quoted 9 lines
---
v2:
- keep BR2684
- correct the claim that Traverse Technologies is defunct, I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
v1: https://lore.kernel.org/[email protected]
Quoted 5 lines · Jakub Kicinski
I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
Still not entirely convinced; I worked on both USB ATM modems and on Solos, and the Solos is both the most modern and the only one I still actually have. And the only one we have native support for that could ever do full 24Mb/s ADSL2+, I believe.
If we drop it, OpenWrt will need to drop support for these, which I think were quite popular at the time; there were a few UK resellers:
https://openwrt.org/toh/traverse/geos1_1
I still don't actually care *enough* to try to find an ADSL line I could plug one into for testing though... :)
Quoted 166 lines · Jakub Kicinski
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (
drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.Removed ATM protocol modules:
-net/atm/clip.c- Classical IP over ATM (RFC 2225)
-net/atm/lec.c- LAN Emulation Client (LANE)
-net/atm/mpc.c,mpoa_caches.c,mpoa_proc.c- Multi-Protocol Over ATMRemoved PCI/SBUS ATM device drivers (
drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY libraryAlso clean up references in:
-net/bridge/- remove ATM LANE hook (br_fdb_test_addr_hook,br_fdb_test_addr)
-net/core/dev.c- removebr_fdb_test_addr_hookexport
- defconfig files - remove ATM driver config optionsThe removed code is moved to an out-of-tree module package (mod-orphan).
Signed-off-by Jakub Kicinski <[email protected]>---
v2:
- keep BR2684
- correct the claim that Traverse Technologies is defunct, I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
v1: https://lore.kernel.org/[email protected]--- MAINTAINERS | 3 +- Documentation/.renames.txt | 2 - .../device_drivers/atm/fore200e.rst | 66 - .../networking/device_drivers/atm/index.rst | 2 - .../networking/device_drivers/atm/iphase.rst | 193 - drivers/atm/Kconfig | 325 -- drivers/net/Kconfig | 2 - net/atm/Kconfig | 37 - drivers/Makefile | 1 - drivers/atm/Makefile | 32 - net/atm/Makefile | 4 - drivers/atm/eni.h | 136 - drivers/atm/fore200e.h | 973 ----- drivers/atm/he.h | 845 ---- drivers/atm/idt77105.h | 92 - drivers/atm/idt77252.h | 816 ---- drivers/atm/idt77252_tables.h | 781 ---- drivers/atm/iphase.h | 1452 ------- drivers/atm/midway.h | 266 -- drivers/atm/nicstar.h | 759 ---- drivers/atm/suni.h | 242 -- drivers/atm/tonga.h | 21 - drivers/atm/zeprom.h | 35 - net/atm/lec.h | 155 - net/atm/lec_arpc.h | 97 - net/atm/mpc.h | 65 - net/atm/mpoa_caches.h | 99 - net/bridge/br_private.h | 4 - drivers/atm/adummy.c | 202 - drivers/atm/atmtcp.c | 513 --- drivers/atm/eni.c | 2321 ---------- drivers/atm/fore200e.c | 3012 ------------- drivers/atm/he.c | 2861 ------------- drivers/atm/idt77105.c | 376 -- drivers/atm/idt77252.c | 3797 ----------------- drivers/atm/iphase.c | 3283 -------------- drivers/atm/lanai.c | 2603 ----------- drivers/atm/nicstar.c | 2759 ------------ drivers/atm/nicstarmac.c | 244 -- drivers/atm/solos-attrlist.c | 83 - drivers/atm/solos-pci.c | 1496 ------- drivers/atm/suni.c | 391 -- net/atm/clip.c | 960 ----- net/atm/lec.c | 2274 ---------- net/atm/mpc.c | 1538 ------- net/atm/mpoa_caches.c | 565 --- net/atm/mpoa_proc.c | 307 -- net/bridge/br.c | 7 - net/bridge/br_fdb.c | 29 - net/core/dev.c | 7 - arch/arm/configs/ixp4xx_defconfig | 5 - arch/mips/configs/gpr_defconfig | 13 - arch/mips/configs/mtx1_defconfig | 13 - arch/powerpc/configs/ppc6xx_defconfig | 9 - drivers/atm/.gitignore | 5 - drivers/atm/nicstarmac.copyright | 61 - 56 files changed, 2 insertions(+), 37237 deletions(-)delete mode 100644
Documentation/networking/device_drivers/atm/fore200e.rstdelete mode 100644Documentation/networking/device_drivers/atm/iphase.rstdelete mode 100644drivers/atm/Kconfig
delete mode 100644drivers/atm/Makefile
delete mode 100644drivers/atm/eni.h
delete mode 100644drivers/atm/fore200e.h
delete mode 100644drivers/atm/he.h
delete mode 100644drivers/atm/idt77105.h
delete mode 100644drivers/atm/idt77252.h
delete mode 100644drivers/atm/idt77252_tables.h
delete mode 100644drivers/atm/iphase.h
delete mode 100644drivers/atm/midway.h
delete mode 100644drivers/atm/nicstar.h
delete mode 100644drivers/atm/suni.h
delete mode 100644drivers/atm/tonga.h
delete mode 100644drivers/atm/zeprom.h
delete mode 100644net/atm/lec.h
delete mode 100644net/atm/lec_arpc.h
delete mode 100644net/atm/mpc.h
delete mode 100644net/atm/mpoa_caches.h
delete mode 100644drivers/atm/adummy.c
delete mode 100644drivers/atm/atmtcp.c
delete mode 100644drivers/atm/eni.c
delete mode 100644drivers/atm/fore200e.c
delete mode 100644drivers/atm/he.c
delete mode 100644drivers/atm/idt77105.c
delete mode 100644drivers/atm/idt77252.c
delete mode 100644drivers/atm/iphase.c
delete mode 100644drivers/atm/lanai.c
delete mode 100644drivers/atm/nicstar.c
delete mode 100644drivers/atm/nicstarmac.c
delete mode 100644drivers/atm/solos-attrlist.c
delete mode 100644drivers/atm/solos-pci.c
Quoted 9 lines
delete mode 100644
drivers/atm/suni.cdelete mode 100644net/atm/clip.c
delete mode 100644net/atm/lec.c
delete mode 100644net/atm/mpc.c
delete mode 100644net/atm/mpoa_caches.cdelete mode 100644net/atm/mpoa_proc.cdelete mode 100644drivers/atm/.gitignoredelete mode 100644drivers/atm/nicstarmac.copyright
FWIW,
Jakub Kicinski
maintainerQuoted 11 lines · On Wed, 22 Apr 2026 14:05:31 +0100 David Woodhouse wrote:
Quoted 4 lines · Jakub Kicinski
I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
Still not entirely convinced; I worked on both USB ATM modems and on Solos, and the Solos is both the most modern and the only one I still actually have. And the only one we have native support for that could ever do full 24Mb/s ADSL2+, I believe.
Quoted 6 lines
If we drop it, OpenWrt will need to drop support for these, which I think were quite popular at the time; there were a few UK resellers:
https://openwrt.org/toh/traverse/geos1_1I still don't actually care *enough* to try to find an ADSL line I could plug one into for testing though... :)
I'm inversely unconvinced. The argument has the ring of "I still have this HW lying around somewhere", which is usually what prevents us from shedding all this dead weight code. I don't want to argue, so I'll keep it. But if one "fix" arrives for this driver - it's going :(
Quoted 16 lines · David Woodhouse
Quoted 5 lines · Jakub Kicinski
I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
Still not entirely convinced; I worked on both USB ATM modems and on Solos, and the Solos is both the most modern and the only one I still actually have. And the only one we have native support for that could ever do full 24Mb/s ADSL2+, I believe.
Quoted 6 lines
If we drop it, OpenWrt will need to drop support for these, which I think were quite popular at the time; there were a few UK resellers:
https://openwrt.org/toh/traverse/geos1_1I still don't actually care *enough* to try to find an ADSL line I could plug one into for testing though... :)
I have 3 boards lying around if anyone wants them.
Quoted 2 lines · Philip Prindeville
Quoted 2 lines · David Woodhouse
On Tue, 2026-04-21 at 21:18 -0700, Jakub Kicinski wrote:
...
Quoted 10 lines
Quoted 10 lines
Quoted 4 lines
I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
Still not entirely convinced; I worked on both USB ATM modems and on Solos, and the Solos is both the most modern and the only one I still actually have. And the only one we have native support for that could ever do full 24Mb/s ADSL2+, I believe.
Quoted 8 lines
Quoted 6 lines
If we drop it, OpenWrt will need to drop support for these, which I think were quite popular at the time; there were a few UK resellers:
https://openwrt.org/toh/traverse/geos1_1I still don't actually care *enough* to try to find an ADSL line I could plug one into for testing though... :)
I have 3 boards lying around if anyone wants them.
The problem as I understand it is in one's willing to maintain and support that driver while doing regular testing...
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 20 lines · Andy Shevchenko
Quoted 2 lines · Philip Prindeville
Quoted 2 lines · David Woodhouse
On Tue, 2026-04-21 at 21:18 -0700, Jakub Kicinski wrote:
...
Quoted 14 lines
Quoted 14 lines
Quoted 4 lines
I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
Still not entirely convinced; I worked on both USB ATM modems and on Solos, and the Solos is both the most modern and the only one I still actually have. And the only one we have native support for that could ever do full 24Mb/s ADSL2+, I believe.
If we drop it, OpenWrt will need to drop support for these, which I think were quite popular at the time; there were a few UK resellers:
https://openwrt.org/toh/traverse/geos1_1
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I still don't actually care *enough* to try to find an ADSL line I could plug one into for testing though... :)
I have 3 boards lying around if anyone wants them.
The problem as I understand it is in one's willing to maintain and support that driver while doing regular testing...
Sure, but that's true of the usb-atm devices too, and I threw all of *those* in the skip already. :)
I'll be more surprised if anyone is actively using one of those, than I would be if someone is using Solos. *If* we are going to keep the USB devices, I'd suggest it makes sense to keep Solos too.
Paolo Abeni
maintainerQuoted 34 lines · Andy Shevchenko
Quoted 33 lines · Jakub Kicinski
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (
drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.Removed ATM protocol modules:
-net/atm/clip.c- Classical IP over ATM (RFC 2225)
-net/atm/lec.c- LAN Emulation Client (LANE)
-net/atm/mpc.c,mpoa_caches.c,mpoa_proc.c- Multi-Protocol Over ATMRemoved PCI/SBUS ATM device drivers (
drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY libraryAlso clean up references in:
-net/bridge/- remove ATM LANE hook (br_fdb_test_addr_hook,br_fdb_test_addr)
-net/core/dev.c- removebr_fdb_test_addr_hookexport
- defconfig files - remove ATM driver config optionsThe removed code is moved to an out-of-tree module package (mod-orphan).
Quoted 9 lines
Quoted 9 lines
Signed-off-by Jakub Kicinski <[email protected]>---
v2:
- keep BR2684
- correct the claim that Traverse Technologies is defunct, I'm still deleting the solos driver, chances are nobody uses it. Easy enough to revert back in since core is still around. The guiding principle is to keep USB modems and delete the rest as USB ADSL2+ CPEs were most popular historically.
A possible alternative would be moving the solos driver (and others similarly old, possibly not used anymore drivers into the staging dir (and let them be removed after some reasonable grace period).
/P
Jakub Kicinski
maintainerQuoted 3 lines · On Wed, 22 Apr 2026 10:08:57 +0300 Andy Shevchenko wrote:
Since it's almost removal and it will go via netdev tree (same tree you are maintaining, I suppose) the -D would have a big help to review the changes (and not see removals at all, as 32k lines of one email is too much).
Good point, I'll remember for the future deletions
Quoted 5 lines · Jakub Kicinski
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
- solos-pci - Traverse Technologies ADSL2+ PCI
We (Traverse) have not made any devices with solos-pci for over 10 years now, and I assume (based on recent removal trends) that the Geode LX SoC on the last board that had it (Geos) won't be operable with new kernels for much longer (IIRC it's feature set isn't quite i586 or i686 level).
I appreciate the folks reaching out about this, however I can confirm that we are not in a position to provide any further support for solos-pci devices.
Quoted 3 lines · Jakub Kicinski
Removed PCI/SBUS ATM device drivers (
drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
I have one of those though sadly it broke a couple years back and doesn't
work anymore.
Quoted 7 lines
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
And I have a number of these, both 77201 and 77211 variants, scattered
across several systems of various architectures in my lab.
Quoted 2 lines
- solos-pci - Traverse Technologies ADSL2+ PCI
- suni - PMC S/UNI SONET PHY library
Plus a bunch of TURBOchannel ATM interfaces, a couple of LightStream ATM
switches and some Ethernet switches with LANE ports. Never found time to get this all set up, so I guess I can't complain really to see this stuff go. Still sad to see the continuous trend to strip Linux of features. :(
Maciej
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:
Quoted 8 lines · On Tue, 21 Apr 2026 21:18:44 -0700 you wrote:
Remove the ATM protocol modules and PCI/SBUS ATM device drivers that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem drivers (
drivers/usb/atm/) are retained in-tree to maintain PPP over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.[...]
Here is the summary with links:
- [net-deletions,v2] net: remove unused ATM protocols and legacy ATM device drivers
https://git.kernel.org/netdev/net/c/6deb53595092
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html