Skip to contentSkip to conversation

iio: accel: mma8452: improve coding style, pm and resource cleanup

PATCH Superseded Sanjay Chitroda 3 participants 23 messages Apr 22 – Apr 26 IIO

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover iio: accel: mma8452: improve coding style, pm and resource cleanup

From: Sanjay Chitroda <[email protected]>

Hi all,

This series contains a small cleanup and improvements to use modern kernel helper API and coding style for mma8452 accelarator driver.

The changes modernize mutex with guard(), dev_err_probe usage, resolve checkpatch CHECKS and pm_ptr macro usage.

Changes in v2:
- 0005: address review comment from Andy and Geert and use DEFINE_RUNTIME_DEV_PM_OPS macro
- Added new cleanup channges in mma8452 driver

No functional behavior changes are intended.

Testing:
- Compiled with W=1
- Build-tested on QEMU x86_64

Feedback and reviews are very welcome.

Thanks,
Sanjay Chitroda

Sanjay Chitroda (6):
iio: accel: mma8452: cleanup codestyle warning
iio: accel: mma8452: sort headers alphabetically
iio: accel: mma8452: use local struct device
iio: accel: mma8452: Use dev_err_probe()
iio: accel: mma8452: use pm_ptr() for dev_pm_ops
iio: accel: mma8452: use guard() to release mutexes

 drivers/iio/accel/mma8452.c | 161 +++++++++++++++++-------------------
 1 file changed, 76 insertions(+), 85 deletions(-)

base-commit: eade2b843d9b1f668fc1775f15611bb0a1999cd9

Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/6 iio: accel: mma8452: cleanup codestyle warning

From: Sanjay Chitroda <[email protected]>

Reported by checkpatch:
FILE: drivers/iio/accel/mma8452.c

CHECK: Alignment should match open parenthesis

---
 drivers/iio/accel/mma8452.c | 47 +++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 23 deletions(-)
drivers/iio/accel/mma8452.c +24 -23
index 15172ba2972c..6d9091f696cf 100644
@@ -704,8 +704,8 @@ static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
 }
 
 static int __mma8452_write_raw(struct iio_dev *indio_dev,
-			     struct iio_chan_spec const *chan,
-			     int val, int val2, long mask)
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int i, j, ret;
@@ -786,8 +786,9 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
 }
 
 static int mma8452_get_event_regs(struct mma8452_data *data,
-		const struct iio_chan_spec *chan, enum iio_event_direction dir,
-		const struct mma8452_event_regs **ev_reg)
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_direction dir,
+				  const struct mma8452_event_regs **ev_reg)
 {
 	if (!chan)
 		return -EINVAL;
@@ -816,11 +817,11 @@ static int mma8452_get_event_regs(struct mma8452_data *data,
 }
 
 static int mma8452_read_event_value(struct iio_dev *indio_dev,
-			       const struct iio_chan_spec *chan,
-			       enum iio_event_type type,
-			       enum iio_event_direction dir,
-			       enum iio_event_info info,
-			       int *val, int *val2)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int *val, int *val2)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int ret, us, power_mode;
@@ -879,11 +880,11 @@ static int mma8452_read_event_value(struct iio_dev *indio_dev,
 }
 
 static int mma8452_write_event_value(struct iio_dev *indio_dev,
-				const struct iio_chan_spec *chan,
-				enum iio_event_type type,
-				enum iio_event_direction dir,
-				enum iio_event_info info,
-				int val, int val2)
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int val, int val2)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int ret, reg, steps;
@@ -953,8 +954,7 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
 	case IIO_EV_DIR_FALLING:
 		return mma8452_freefall_mode_enabled(data);
 	case IIO_EV_DIR_RISING:
-		ret = i2c_smbus_read_byte_data(data->client,
-				ev_regs->ev_cfg);
+		ret = i2c_smbus_read_byte_data(data->client, ev_regs->ev_cfg);
 		if (ret < 0)
 			return ret;
 
@@ -1191,7 +1191,7 @@ static const struct attribute_group mma8452_event_attribute_group = {
 
 static const struct iio_mount_matrix *
 mma8452_get_mount_matrix(const struct iio_dev *indio_dev,
-			   const struct iio_chan_spec *chan)
+			 const struct iio_chan_spec *chan)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
 
@@ -1514,8 +1514,9 @@ static int mma8452_reset(struct i2c_client *client)
 	 * The following code will read the reset register, and check whether
 	 * this reset works.
 	 */
-	i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
-					MMA8452_CTRL_REG2_RST);
+	i2c_smbus_write_byte_data(client,
+				  MMA8452_CTRL_REG2,
+				  MMA8452_CTRL_REG2_RST);
 
 	for (i = 0; i < 10; i++) {
 		usleep_range(100, 200);
@@ -1645,8 +1646,8 @@ static int mma8452_probe(struct i2c_client *client)
 			dev_dbg(&client->dev, "using interrupt line INT2\n");
 		} else {
 			ret = i2c_smbus_write_byte_data(client,
-						MMA8452_CTRL_REG5,
-						data->chip_info->all_events);
+							MMA8452_CTRL_REG5,
+							data->chip_info->all_events);
 			if (ret < 0)
 				goto disable_regulators;
 
@@ -1654,8 +1655,8 @@ static int mma8452_probe(struct i2c_client *client)
 		}
 
 		ret = i2c_smbus_write_byte_data(client,
-					MMA8452_CTRL_REG4,
-					data->chip_info->enabled_events);
+						MMA8452_CTRL_REG4,
+						data->chip_info->enabled_events);
 		if (ret < 0)
 			goto disable_regulators;
 
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 2/6 iio: accel: mma8452: sort headers alphabetically

In reply to Sanjay Chitroda

From: Sanjay Chitroda <[email protected]>

Sort include headers alphabetically to improve readability.

---
 drivers/iio/accel/mma8452.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/iio/accel/mma8452.c +9 -7
index 6d9091f696cf..c54c0ea05ac1 100644
@@ -18,21 +18,23 @@
  * TODO: orientation events
  */
 
-#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/i2c.h>
+#include <linux/types.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
-#include <linux/iio/events.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
+
 #include <linux/regulator/consumer.h>
-#include <linux/types.h>
 
 #define MMA8452_STATUS				0x00
 #define  MMA8452_STATUS_DRDY			(BIT(2) | BIT(1) | BIT(0))
Signature · 1 line
2.34.1
#6 lore raw

PATCH v2 3/6 iio: accel: mma8452: use local struct device

In reply to Sanjay Chitroda

From: Sanjay Chitroda <[email protected]>

Introduce a local struct device pointer derived from &client->dev. This avoids repeated &client->dev usage and improves readability.

---
 drivers/iio/accel/mma8452.c | 51 ++++++++++++++++++++-----------------
 1 file changed, 27 insertions(+), 24 deletions(-)
drivers/iio/accel/mma8452.c +27 -24
index c54c0ea05ac1..99f7763b84ac 100644
@@ -225,13 +225,14 @@ static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
 {
 #ifdef CONFIG_PM
 	int ret;
+	struct device *dev = &client->dev;
 
 	if (on)
-		ret = pm_runtime_resume_and_get(&client->dev);
+		ret = pm_runtime_resume_and_get(dev);
 	else
-		ret = pm_runtime_put_autosuspend(&client->dev);
+		ret = pm_runtime_put_autosuspend(dev);
 	if (ret < 0) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"failed to change power state to %d\n", on);
 
 		return ret;
@@ -1548,10 +1549,11 @@ MODULE_DEVICE_TABLE(of, mma8452_dt_ids);
 static int mma8452_probe(struct i2c_client *client)
 {
 	struct mma8452_data *data;
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -1561,32 +1563,32 @@ static int mma8452_probe(struct i2c_client *client)
 
 	data->chip_info = i2c_get_match_data(client);
 	if (!data->chip_info)
-		return dev_err_probe(&client->dev, -ENODEV,
+		return dev_err_probe(dev, -ENODEV,
 				     "unknown device model\n");
 
-	ret = iio_read_mount_matrix(&client->dev, &data->orientation);
+	ret = iio_read_mount_matrix(dev, &data->orientation);
 	if (ret)
 		return ret;
 
-	data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+	data->vdd_reg = devm_regulator_get(dev, "vdd");
 	if (IS_ERR(data->vdd_reg))
-		return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg),
+		return dev_err_probe(dev, PTR_ERR(data->vdd_reg),
 				     "failed to get VDD regulator!\n");
 
-	data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+	data->vddio_reg = devm_regulator_get(dev, "vddio");
 	if (IS_ERR(data->vddio_reg))
-		return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg),
+		return dev_err_probe(dev, PTR_ERR(data->vddio_reg),
 				     "failed to get VDDIO regulator!\n");
 
 	ret = regulator_enable(data->vdd_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		dev_err(dev, "failed to enable VDD regulator!\n");
 		return ret;
 	}
 
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		dev_err(dev, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;
 	}
 
@@ -1609,7 +1611,7 @@ static int mma8452_probe(struct i2c_client *client)
 		goto disable_regulators;
 	}
 
-	dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
+	dev_info(dev, "registering %s accelerometer; ID 0x%x\n",
 		 data->chip_info->name, data->chip_info->chip_id);
 
 	i2c_set_clientdata(client, indio_dev);
@@ -1642,10 +1644,10 @@ static int mma8452_probe(struct i2c_client *client)
 	if (client->irq) {
 		int irq2;
 
-		irq2 = fwnode_irq_get_byname(dev_fwnode(&client->dev), "INT2");
+		irq2 = fwnode_irq_get_byname(dev_fwnode(dev), "INT2");
 
 		if (irq2 == client->irq) {
-			dev_dbg(&client->dev, "using interrupt line INT2\n");
+			dev_dbg(dev, "using interrupt line INT2\n");
 		} else {
 			ret = i2c_smbus_write_byte_data(client,
 							MMA8452_CTRL_REG5,
@@ -1653,7 +1655,7 @@ static int mma8452_probe(struct i2c_client *client)
 			if (ret < 0)
 				goto disable_regulators;
 
-			dev_dbg(&client->dev, "using interrupt line INT1\n");
+			dev_dbg(dev, "using interrupt line INT1\n");
 		}
 
 		ret = i2c_smbus_write_byte_data(client,
@@ -1683,7 +1685,7 @@ static int mma8452_probe(struct i2c_client *client)
 		goto trigger_cleanup;
 
 	if (client->irq) {
-		ret = devm_request_threaded_irq(&client->dev,
+		ret = devm_request_threaded_irq(dev,
 						client->irq,
 						NULL, mma8452_interrupt,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -1692,14 +1694,14 @@ static int mma8452_probe(struct i2c_client *client)
 			goto buffer_cleanup;
 	}
 
-	ret = pm_runtime_set_active(&client->dev);
+	ret = pm_runtime_set_active(dev);
 	if (ret < 0)
 		goto buffer_cleanup;
 
-	pm_runtime_enable(&client->dev);
-	pm_runtime_set_autosuspend_delay(&client->dev,
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev,
 					 MMA8452_AUTO_SUSPEND_DELAY_MS);
-	pm_runtime_use_autosuspend(&client->dev);
+	pm_runtime_use_autosuspend(dev);
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
@@ -1732,12 +1734,13 @@ static int mma8452_probe(struct i2c_client *client)
 static void mma8452_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
 	struct mma8452_data *data = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 
-	pm_runtime_disable(&client->dev);
-	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
 
 	iio_triggered_buffer_cleanup(indio_dev);
 	mma8452_trigger_cleanup(indio_dev);
@@ -1758,7 +1761,7 @@ static int mma8452_runtime_suspend(struct device *dev)
 	ret = mma8452_standby(data);
 	mutex_unlock(&data->lock);
 	if (ret < 0) {
-		dev_err(&data->client->dev, "powering off device failed\n");
+		dev_err(dev, "powering off device failed\n");
 		return -EAGAIN;
 	}
 
Signature · 1 line
2.34.1
#11 lore raw

PATCH v2 4/6 iio: accel: mma8452: Use dev_err_probe()

In reply to Sanjay Chitroda

From: Sanjay Chitroda <[email protected]>

dev_err_probe() makes error code handling simpler and handle deferred probe nicely (avoid spamming logs).

---
 drivers/iio/accel/mma8452.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/iio/accel/mma8452.c +4 -7
index 99f7763b84ac..d1ae2bf37409 100644
@@ -1563,8 +1563,7 @@ static int mma8452_probe(struct i2c_client *client)
 
 	data->chip_info = i2c_get_match_data(client);
 	if (!data->chip_info)
-		return dev_err_probe(dev, -ENODEV,
-				     "unknown device model\n");
+		return dev_err_probe(dev, -ENODEV, "unknown device model\n");
 
 	ret = iio_read_mount_matrix(dev, &data->orientation);
 	if (ret)
@@ -1581,14 +1580,12 @@ static int mma8452_probe(struct i2c_client *client)
 				     "failed to get VDDIO regulator!\n");
 
 	ret = regulator_enable(data->vdd_reg);
-	if (ret) {
-		dev_err(dev, "failed to enable VDD regulator!\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to enable VDD regulator!\n");
 
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDIO regulator!\n");
+		dev_err_probe(dev, ret, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;
 	}
 
Signature · 1 line
2.34.1
#16 lore raw

PATCH v2 5/6 iio: accel: mma8452: use pm_ptr() for dev_pm_ops

In reply to Sanjay Chitroda

From: Sanjay Chitroda <[email protected]>

Use pm_ptr() and DEFINE_RUNTIME_DEV_PM_OPS() so the PM ops pointer is automatically handle when CONFIG_PM is enabled/disabled. This follows modern kernel power-management conventions.

---
Changes in v2:
- Use DEFINE_RUNTIME_DEV_PM_OPS to address review comment and resolve 0-day bot warning
- Link to v1: https://lore.kernel.org/all/[email protected]/

---
 drivers/iio/accel/mma8452.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/iio/accel/mma8452.c +3 -8
index d1ae2bf37409..9983f76a8bcd 100644
@@ -1747,7 +1747,6 @@ static void mma8452_remove(struct i2c_client *client)
 	regulator_disable(data->vdd_reg);
 }
 
-#ifdef CONFIG_PM
 static int mma8452_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
@@ -1815,13 +1814,9 @@ static int mma8452_runtime_resume(struct device *dev)
 
 	return ret;
 }
-#endif
 
-static const struct dev_pm_ops mma8452_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
-	SET_RUNTIME_PM_OPS(mma8452_runtime_suspend,
-			   mma8452_runtime_resume, NULL)
-};
+static DEFINE_RUNTIME_DEV_PM_OPS(mma8452_pm_ops, mma8452_runtime_suspend,
+				 mma8452_runtime_resume, NULL);
 
 static const struct i2c_device_id mma8452_id[] = {
 	{ "fxls8471", (kernel_ulong_t)&mma_chip_info_table[fxls8471] },
@@ -1838,7 +1833,7 @@ static struct i2c_driver mma8452_driver = {
 	.driver = {
 		.name	= "mma8452",
 		.of_match_table = mma8452_dt_ids,
-		.pm	= &mma8452_pm_ops,
+		.pm	= pm_ptr(&mma8452_pm_ops),
 	},
 	.probe = mma8452_probe,
 	.remove = mma8452_remove,
Signature · 1 line
2.34.1
#19 lore raw

PATCH v2 6/6 iio: accel: mma8452: use guard() to release mutexes

In reply to Sanjay Chitroda

From: Sanjay Chitroda <[email protected]>

Replace explicit mutex_lock() and mutex_unlock() with the guard() and scoped_guard() macro for cleaner and safer mutex handling.

---
 drivers/iio/accel/mma8452.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)
drivers/iio/accel/mma8452.c +12 -19
index 9983f76a8bcd..1c284bdcc44a 100644
@@ -18,6 +18,7 @@
  * TODO: orientation events
  */
 
+#include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
@@ -500,9 +501,8 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
 		if (!iio_device_claim_direct(indio_dev))
 			return -EBUSY;
 
-		mutex_lock(&data->lock);
-		ret = mma8452_read(data, buffer);
-		mutex_unlock(&data->lock);
+		scoped_guard(mutex, &data->lock)
+			ret = mma8452_read(data, buffer);
 		iio_device_release_direct(indio_dev);
 		if (ret < 0)
 			return ret;
@@ -600,36 +600,30 @@ static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
 	int ret;
 	int is_active;
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 
 	is_active = mma8452_is_active(data);
-	if (is_active < 0) {
-		ret = is_active;
-		goto fail;
-	}
+	if (is_active < 0)
+		return is_active;
 
 	/* config can only be changed when in standby */
 	if (is_active > 0) {
 		ret = mma8452_standby(data);
 		if (ret < 0)
-			goto fail;
+			return ret;
 	}
 
 	ret = i2c_smbus_write_byte_data(data->client, reg, val);
 	if (ret < 0)
-		goto fail;
+		return ret;
 
 	if (is_active > 0) {
 		ret = mma8452_active(data);
 		if (ret < 0)
-			goto fail;
+			return ret;
 	}
 
-	ret = 0;
-fail:
-	mutex_unlock(&data->lock);
-
-	return ret;
+	return 0;
 }
 
 static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
@@ -1753,9 +1747,8 @@ static int mma8452_runtime_suspend(struct device *dev)
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int ret;
 
-	mutex_lock(&data->lock);
-	ret = mma8452_standby(data);
-	mutex_unlock(&data->lock);
+	scoped_guard(mutex, &data->lock)
+		ret = mma8452_standby(data);
 	if (ret < 0) {
 		dev_err(dev, "powering off device failed\n");
 		return -EAGAIN;
Signature · 1 line
2.34.1
#3 lore raw

Re: [PATCH v2 2/6] iio: accel: mma8452: sort headers alphabetically

In reply to Sanjay Chitroda
Quoted 1 line · Sanjay Chitroda

Sort include headers alphabetically to improve readability.

...

Quoted 15 lines
drivers/iio/accel/mma8452.c +8 -3
-#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/i2c.h>
+#include <linux/types.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>

drivers/iio/accel/mma8452.c

Quoted 10 lines
drivers/iio/accel/mma8452.c +1 -4
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
-#include <linux/iio/events.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
 
+
 #include <linux/regulator/consumer.h>
-#include <linux/types.h>

For this driver the regulator/consumer is a regular header and can be moved to be between property.h and types.h.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw

Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

In reply to Sanjay Chitroda
Quoted 2 lines · Sanjay Chitroda

Introduce a local struct device pointer derived from &client->dev. This avoids repeated &client->dev usage and improves readability.

...

Quoted 3 lines

static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
{
#ifdef CONFIG_PM

So, this seems to be a missed in the PM patch.

drivers/iio/accel/mma8452.c static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on) · line 228

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
 	int ret;
+	struct device *dev = &client->dev;

Keep it in reversed xmas tree order.

Quoted 14 lines
drivers/iio/accel/mma8452.c +3 -3
 	if (on)
-		ret = pm_runtime_resume_and_get(&client->dev);
+		ret = pm_runtime_resume_and_get(dev);
 	else
-		ret = pm_runtime_put_autosuspend(&client->dev);
+		ret = pm_runtime_put_autosuspend(dev);
 	if (ret < 0) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"failed to change power state to %d\n", on);
 
 		return ret;
 
 }

...

drivers/iio/accel/mma8452.c MODULE_DEVICE_TABLE(of, mma8452_dt_ids); · line 1552

Quoted 4 lines

static int mma8452_probe(struct i2c_client *client) {

drivers/iio/accel/mma8452.c +1 -0
 	struct mma8452_data *data;
+	struct device *dev = &client->dev;

Same here, reversed xmas tree order.

Quoted 2 lines
drivers/iio/accel/mma8452.c +0 -0
 	struct iio_dev *indio_dev;
 	int ret;

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1567

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	data->chip_info = i2c_get_match_data(client);
 	if (!data->chip_info)
-		return dev_err_probe(&client->dev, -ENODEV,
+		return dev_err_probe(dev, -ENODEV,
 				     "unknown device model\n");

Now it's a single line.

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1586

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vdd_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		dev_err(dev, "failed to enable VDD regulator!\n");
 		return ret;

Convert this to dev_err_probe() before doing this patch. In that patch you introduce temporary dev variable already. Here will use in the other places.

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1592

Quoted 7 lines
drivers/iio/accel/mma8452.c +1 -1
 	}
 
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		dev_err(dev, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;

Ditto.

Quoted 1 line

}

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1703

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
+	pm_runtime_set_autosuspend_delay(dev,
 					 MMA8452_AUTO_SUSPEND_DELAY_MS);

Now a single line.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#12 lore raw

Re: [PATCH v2 4/6] iio: accel: mma8452: Use dev_err_probe()

In reply to Sanjay Chitroda
Quoted 2 lines · Sanjay Chitroda

dev_err_probe() makes error code handling simpler and handle deferred probe nicely (avoid spamming logs).

This patch should go earlier than dev temporary variable one. And dev needs to be introduced here.

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1589

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDIO regulator!\n");
+		dev_err_probe(dev, ret, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;

Before doing these patches, please fix the mess with the devm/non-devm ordering. There shouldn't be goto after any devm calls.

Quoted 1 line

}

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#17 lore raw

Re: [PATCH v2 5/6] iio: accel: mma8452: use pm_ptr() for dev_pm_ops

In reply to Sanjay Chitroda
Quoted 3 lines · Sanjay Chitroda

Use pm_ptr() and DEFINE_RUNTIME_DEV_PM_OPS() so the PM ops pointer is automatically handle when CONFIG_PM is enabled/disabled. This follows modern kernel power-management conventions.

After this patch there are still CONFIG_PM ifdeffery left, why?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#20 lore raw

Re: [PATCH v2 6/6] iio: accel: mma8452: use guard() to release mutexes

In reply to Sanjay Chitroda
Quoted 2 lines · Sanjay Chitroda

Replace explicit mutex_lock() and mutex_unlock() with the guard() and scoped_guard() macro for cleaner and safer mutex handling.

This one seems okay, but since it's not the majority of the changes that can go, I won't give any tag right now, let's see v3 (but wait at least a couple of days to give chances to others to review v2 in case I missed something).

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#4 lore raw

Re: [PATCH v2 2/6] iio: accel: mma8452: sort headers alphabetically

In reply to Andy Shevchenko
Quoted 28 lines · Andy Shevchenko
Quoted 1 line · Sanjay Chitroda

Sort include headers alphabetically to improve readability.

...

Quoted 21 lines
drivers/iio/accel/mma8452.c +8 -6
-#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/i2c.h>
+#include <linux/types.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
-#include <linux/iio/events.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
Quoted 7 lines

drivers/iio/accel/mma8452.c line 35

Quoted 3 lines
drivers/iio/accel/mma8452.c +1 -1
+
 #include <linux/regulator/consumer.h>
-#include <linux/types.h>

For this driver the regulator/consumer is a regular header and can be moved to be between property.h and types.h.

Andy, Thank you for your review.
Along with alphabetic sort, I have also grouped different header(s), at top linux direct header, then iio headers and at last regulator headers for readability.

If you suggest, I would include this in commit description.

Thanks,
Sanjay Chitroda

#8 lore raw

Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

In reply to Andy Shevchenko
Quoted 11 lines · Andy Shevchenko
Quoted 2 lines · Sanjay Chitroda

Introduce a local struct device pointer derived from &client->dev. This avoids repeated &client->dev usage and improves readability.

...

Quoted 3 lines

static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
{
#ifdef CONFIG_PM

Quoted 7 lines

So, this seems to be a missed in the PM patch.

drivers/iio/accel/mma8452.c static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on) · line 228

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
 	int ret;
+	struct device *dev = &client->dev;

Keep it in reversed xmas tree order.

Understood, along with headers would attempt to keep all local variables also in chronological order.

Quoted 15 lines
Quoted 4 lines
drivers/iio/accel/mma8452.c +1 -1
 	if (on)
-		ret = pm_runtime_resume_and_get(&client->dev);
+		ret = pm_runtime_resume_and_get(dev);
 	else

drivers/iio/accel/mma8452.c static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)

Quoted 10 lines
drivers/iio/accel/mma8452.c +2 -2
-		ret = pm_runtime_put_autosuspend(&client->dev);
+		ret = pm_runtime_put_autosuspend(dev);
 	if (ret < 0) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"failed to change power state to %d\n", on);
 
 		return ret;
 
 }
Quoted 12 lines

...

drivers/iio/accel/mma8452.c MODULE_DEVICE_TABLE(of, mma8452_dt_ids); · line 1552

Quoted 4 lines

static int mma8452_probe(struct i2c_client *client) {

drivers/iio/accel/mma8452.c +1 -0
 	struct mma8452_data *data;
+	struct device *dev = &client->dev;

Same here, reversed xmas tree order.

Quoted 2 lines
drivers/iio/accel/mma8452.c +0 -0
 	struct iio_dev *indio_dev;
 	int ret;

Sure, understood.

Quoted 12 lines

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1567

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	data->chip_info = i2c_get_match_data(client);
 	if (!data->chip_info)
-		return dev_err_probe(&client->dev, -ENODEV,
+		return dev_err_probe(dev, -ENODEV,
 				     "unknown device model\n");

Now it's a single line.

...

Quoted 9 lines

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1586

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vdd_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		dev_err(dev, "failed to enable VDD regulator!\n");
 		return ret;

Convert this to dev_err_probe() before doing this patch. In that patch you introduce temporary dev variable already. Here will use in the other places.

Agree with you, will rebase in next series.

Quoted 10 lines

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1592

Quoted 7 lines
drivers/iio/accel/mma8452.c +1 -1
 	}
 
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		dev_err(dev, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;

Ditto.

Sure.

Quoted 9 lines
Quoted 1 line

}

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1703

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
+	pm_runtime_set_autosuspend_delay(dev,
 					 MMA8452_AUTO_SUSPEND_DELAY_MS);

Now a single line.

#5 lore raw

Re: [PATCH v2 2/6] iio: accel: mma8452: sort headers alphabetically

In reply to Sanjay Chitroda
Quoted 2 lines · Sanjay Chitroda
Quoted 1 line · Andy Shevchenko

On Wed, Apr 22, 2026 at 10:26:39PM +0530, Sanjay Chitroda wrote:

...

Quoted 7 lines
Quoted 2 lines

For this driver the regulator/consumer is a regular header and can be moved to be between property.h and types.h.

Andy, Thank you for your review.
Along with alphabetic sort, I have also grouped different header(s), at top linux direct header, then iio headers and at last regulator headers for readability.

The grouping of some subset of linux/* or other headers is done only for the purpose of pointing out the strong relationship with the certain subsystem. For example, driver of the regulator belongs to the regulator subsystem, and grouping regulator headers (in case more than a single one in use) makes at least some sense. This driver has nothing to do with the regulator subsystem, it doesn't belong to it.

In the above I described just an example, the same applicable for any subsystem and driver. I.o.w. use the common sense.

Quoted 1 line

If you suggest, I would include this in commit description.

Yes I do suggest to move it back to the generic linux/* group.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#9 lore raw

Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

In reply to Sanjay Chitroda
Quoted 2 lines · Sanjay Chitroda
Quoted 1 line · Andy Shevchenko

On Wed, Apr 22, 2026 at 10:26:40PM +0530, Sanjay Chitroda wrote:

...

Quoted 7 lines
Quoted 5 lines

drivers/iio/accel/mma8452.c static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on) · line 228

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
 	int ret;
+	struct device *dev = &client->dev;

Keep it in reversed xmas tree order.

Understood, along with headers would attempt to keep all local variables also in chronological order.

I'm not sure. What does chronological mean in this case?

Reversed xmas tree order means to have longest lines first. The assignments may have dependencies, hence must follow that first and then the reversed xmas tree. Returned variable might go last in some cases even if it's slightly longer than other variables for giving it a better visibility.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#13 lore raw

Re: [PATCH v2 4/6] iio: accel: mma8452: Use dev_err_probe()

In reply to Andy Shevchenko
Quoted 10 lines · On Wed, 22 Apr 2026 22:37:32 +0300 Andy Shevchenko…
Quoted 2 lines · Sanjay Chitroda

dev_err_probe() makes error code handling simpler and handle deferred probe nicely (avoid spamming logs).

This patch should go earlier than dev temporary variable one. And dev needs to be introduced here.

...

Quoted 9 lines

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1589

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDIO regulator!\n");
+		dev_err_probe(dev, ret, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;  

Before doing these patches, please fix the mess with the devm/non-devm ordering. There shouldn't be goto after any devm calls.

I briefly wondered what you meant here. Key is you are referring to devm_request_threaded_irq() much further down.

Absolutely agree that's wrong. Rule is devm until you stop doing devm and then no more devm.

Here it looks like we can take the whole thing devm but it will need some custom callbacks and we may run into corner cases with runtime_pm() messing with the supplies and devm cleanup doing so (that applies even without devm being involved)

Jonathan

Quoted 2 lines
Quoted 1 line

}

maintainer
#10 lore raw

Re: [PATCH v2 3/6] iio: accel: mma8452: use local struct device

In reply to Andy Shevchenko
Quoted 5 lines · On Wed, 22 Apr 2026 22:35:33 +0300 Andy Shevchenko…
Quoted 2 lines · Sanjay Chitroda

Introduce a local struct device pointer derived from &client->dev. This avoids repeated &client->dev usage and improves readability.

Quoted 7 lines

...

Quoted 3 lines

static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
{
#ifdef CONFIG_PM

So, this seems to be a missed in the PM patch.

Get rid of this function as part of that cleanup. Having the runtime pm calls inline is going to be cleaner.

Quoted 73 lines

drivers/iio/accel/mma8452.c static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on) · line 228

Quoted 3 lines
drivers/iio/accel/mma8452.c +1 -0
 	int ret;
+	struct device *dev = &client->dev;  

Keep it in reversed xmas tree order.

Quoted 14 lines
drivers/iio/accel/mma8452.c +3 -3
 	if (on)
-		ret = pm_runtime_resume_and_get(&client->dev);
+		ret = pm_runtime_resume_and_get(dev);
 	else
-		ret = pm_runtime_put_autosuspend(&client->dev);
+		ret = pm_runtime_put_autosuspend(dev);
 	if (ret < 0) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"failed to change power state to %d\n", on);
 
 		return ret;  
 
 }  

...

drivers/iio/accel/mma8452.c MODULE_DEVICE_TABLE(of, mma8452_dt_ids); · line 1552

Quoted 4 lines

static int mma8452_probe(struct i2c_client *client) {

drivers/iio/accel/mma8452.c +1 -0
 	struct mma8452_data *data;
+	struct device *dev = &client->dev;  

Same here, reversed xmas tree order.

Quoted 2 lines
drivers/iio/accel/mma8452.c +0 -0
 	struct iio_dev *indio_dev;
 	int ret;  

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1567

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	data->chip_info = i2c_get_match_data(client);
 	if (!data->chip_info)
-		return dev_err_probe(&client->dev, -ENODEV,
+		return dev_err_probe(dev, -ENODEV,
 				     "unknown device model\n");  

Now it's a single line.

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1586

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vdd_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDD regulator!\n");
+		dev_err(dev, "failed to enable VDD regulator!\n");
 		return ret;  

Convert this to dev_err_probe() before doing this patch. In that patch you introduce temporary dev variable already. Here will use in the other places.

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1592

Quoted 7 lines
drivers/iio/accel/mma8452.c +1 -1
 	}
 
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+		dev_err(dev, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;  

Ditto.

Quoted 1 line

}

...

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1703

Quoted 2 lines
drivers/iio/accel/mma8452.c +1 -0
+	pm_runtime_set_autosuspend_delay(dev,
 					 MMA8452_AUTO_SUSPEND_DELAY_MS);  

Now a single line.

maintainer
#18 lore raw

Re: [PATCH v2 5/6] iio: accel: mma8452: use pm_ptr() for dev_pm_ops

In reply to Andy Shevchenko
Quoted 7 lines · On Wed, 22 Apr 2026 22:38:14 +0300 Andy Shevchenko…
Quoted 3 lines · Sanjay Chitroda

Use pm_ptr() and DEFINE_RUNTIME_DEV_PM_OPS() so the PM ops pointer is automatically handle when CONFIG_PM is enabled/disabled. This follows modern kernel power-management conventions.

After this patch there are still CONFIG_PM ifdeffery left, why?

I replied on earlier patch to this.
Drop the wrapper function in favour of just having the pm_runtime_xx calls inline.

That will also get rid of the ifdeffery.

J

Quoted 1 line
maintainer
#21 lore raw

Re: [PATCH v2 6/6] iio: accel: mma8452: use guard() to release mutexes

In reply to Sanjay Chitroda
Quoted 6 lines · On Wed, 22 Apr 2026 22:26:43 +0530 Sanjay Chitroda…

From: Sanjay Chitroda <[email protected]>

Replace explicit mutex_lock() and mutex_unlock() with the guard() and scoped_guard() macro for cleaner and safer mutex handling.

Hi Sanjay,

This can be taken a step further and give less churn + a cleaner end result.

Quoted 17 lines
---
 drivers/iio/accel/mma8452.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)
drivers/iio/accel/mma8452.c +1 -0
index 9983f76a8bcd..1c284bdcc44a 100644
@@ -18,6 +18,7 @@
  * TODO: orientation events
  */
 
+#include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/mod_devicetable.h>

drivers/iio/accel/mma8452.c static int mma8452_read_raw(struct iio_dev *indio_dev, · line 504

Quoted 7 lines
drivers/iio/accel/mma8452.c +1 -3
@@ -500,9 +501,8 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
 		if (!iio_device_claim_direct(indio_dev))
 			return -EBUSY;
 
-		mutex_lock(&data->lock);
-		ret = mma8452_read(data, buffer);
-		mutex_unlock(&data->lock);
+		scoped_guard(mutex, &data->lock)

rest of the maths after this point is trivial an safe to do under locks, so even better than this change might be to go directly to using the ACQUIRE magic to handle the direct mode control claiming as well.

	case IIO_CHAN_INFO_RAW: {
		IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
 		if (IIO_DEV_ACQUIRE_FAILED(claim))
			return -EBUSY;
		guard(mutex)(&data->lock);

		ret = mma8452_read(data, buffer);
		if (ret < 0)
			return ret;

		*val = sign_extend32(be16_to_cpu(
			buffer[chan->scan_index]) >> chan->scan_type.shift,
			chan->scan_type.realbits - 1);

		return IIO_VAL_INT;
	}

There is one other place where it maybe worth using IIO_DEV_ACQUIRE_DIRECT_MODE() In that location the advantage is tiny but then we'd have all the code in here using that approach and I think that is worth doing.

+ ret = mma8452_read(data, buffer);

Quoted 3 lines
drivers/iio/accel/mma8452.c +0 -0
 		iio_device_release_direct(indio_dev);
 		if (ret < 0)
 			return ret;
maintainer
#14 lore raw

Re: [PATCH v2 4/6] iio: accel: mma8452: Use dev_err_probe()

In reply to Jonathan Cameron
Quoted 25 lines · On Fri, 24 Apr 2026 18:19:19 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 10 lines · On Wed, 22 Apr 2026 22:37:32 +0300 Andy Shevchenko…
Quoted 2 lines · Sanjay Chitroda

dev_err_probe() makes error code handling simpler and handle deferred probe nicely (avoid spamming logs).

This patch should go earlier than dev temporary variable one. And dev needs to be introduced here.

...

Quoted 9 lines

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1589

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDIO regulator!\n");
+		dev_err_probe(dev, ret, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;    

Before doing these patches, please fix the mess with the devm/non-devm ordering. There shouldn't be goto after any devm calls.

I briefly wondered what you meant here. Key is you are referring to devm_request_threaded_irq() much further down.

Quoted 7 lines

Absolutely agree that's wrong. Rule is devm until you stop doing devm and then no more devm.

Here it looks like we can take the whole thing devm but it will need some custom callbacks and we may run into corner cases with runtime_pm() messing with the supplies and devm cleanup doing so (that applies even without devm being involved)

Just noticed the two regulators are always controlled together. Can probably simplify code by using bulk operators. e.g. regulator_bulk_enable() / disable() etc.

Quoted 9 lines

Jonathan

Quoted 2 lines
Quoted 1 line

}

maintainer
#22 lore raw
In reply to Sanjay Chitroda
Quoted 9 lines · On Wed, 22 Apr 2026 22:26:37 +0530 Sanjay Chitroda…

From: Sanjay Chitroda <[email protected]>

Hi all,

This series contains a small cleanup and improvements to use modern kernel helper API and coding style for mma8452 accelarator driver.

The changes modernize mutex with guard(), dev_err_probe usage, resolve checkpatch CHECKS and pm_ptr macro usage.

Take a look at what the sashiko checker came up with. Some other issues in the driver beyond the ones humans reviewers have pointed out.
https://sashiko.dev/#/patchset/20260422165643.2148195-1-sanjayembedded%40gmail.com

Be careful though - there are false positives in the output of this tool so check everything carefully.

Jonathan

Quoted 30 lines

Changes in v2:
- 0005: address review comment from Andy and Geert and use DEFINE_RUNTIME_DEV_PM_OPS macro
- Added new cleanup channges in mma8452 driver

No functional behavior changes are intended.

Testing:
- Compiled with W=1
- Build-tested on QEMU x86_64

Feedback and reviews are very welcome.

Thanks,
Sanjay Chitroda

Sanjay Chitroda (6):
iio: accel: mma8452: cleanup codestyle warning
iio: accel: mma8452: sort headers alphabetically
iio: accel: mma8452: use local struct device
iio: accel: mma8452: Use dev_err_probe()
iio: accel: mma8452: use pm_ptr() for dev_pm_ops
iio: accel: mma8452: use guard() to release mutexes

 drivers/iio/accel/mma8452.c | 161 +++++++++++++++++-------------------
 1 file changed, 76 insertions(+), 85 deletions(-)

base-commit: eade2b843d9b1f668fc1775f15611bb0a1999cd9

#15 lore raw

Re: [PATCH v2 4/6] iio: accel: mma8452: Use dev_err_probe()

In reply to Jonathan Cameron
Quoted 3 lines · Jonathan Cameron
Quoted 1 line · On Wed, 22 Apr 2026 22:37:32 +0300 Andy Shevchenko…

On Wed, Apr 22, 2026 at 10:26:41PM +0530, Sanjay Chitroda wrote:

...

Quoted 11 lines
Quoted 9 lines

drivers/iio/accel/mma8452.c static int mma8452_probe(struct i2c_client *client) · line 1589

Quoted 5 lines
drivers/iio/accel/mma8452.c +1 -1
 	ret = regulator_enable(data->vddio_reg);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDIO regulator!\n");
+		dev_err_probe(dev, ret, "failed to enable VDDIO regulator!\n");
 		goto disable_regulator_vdd;  

Before doing these patches, please fix the mess with the devm/non-devm ordering. There shouldn't be goto after any devm calls.

I briefly wondered what you meant here. Key is you are referring to devm_request_threaded_irq() much further down.

Yes, that one.

Quoted 9 lines

Absolutely agree that's wrong. Rule is devm until you stop doing devm and then no more devm.

Here it looks like we can take the whole thing devm but it will need some custom callbacks and we may run into corner cases with runtime_pm() messing with the supplies and devm cleanup doing so (that applies even without devm being involved)

Quoted 1 line
Quoted 1 line

}

Signature · 2 lines
With Best Regards,
Andy Shevchenko