hw/usb/ehci: Add 64-bit descriptor addressing support
v4 cover hw/usb/ehci: Add 64-bit descriptor addressing support
EHCI supports 64-bit addressing through the CTRLDSSEGMENT register, which provides the upper 32 bits of descriptor addresses when the controller advertises 64-bit capability.
Currently QEMU EHCI model only partially supports this functionality and descriptor addresses are effectively treated as 32-bit. This becomes problematic on systems where system memory is located above the 4GB boundary.
The Linux EHCI driver enables 64-bit addressing if the controller advertises the capability. During initialization it programs the segment register to zero:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-hcd.c#L600
The driver also notes that descriptor structures allocated from the DMA pool use segment zero semantics. Descriptor memory is allocated using the DMA API and platforms may configure a 64-bit DMA mask, allowing descriptor memory to be placed above 4GB.
On AST2700 platforms, system DRAM is mapped at 0x400000000. As a result, descriptor addresses constructed directly from the EHCI registers do not match the actual system addresses used by the controller when accessing queue heads (QH) and queue element transfer descriptors (qTD).
This patch series implements full 64-bit descriptor addressing support in the EHCI emulation. Descriptor address handling is updated to use 64-bit values and the descriptor structures (QH, qTD, iTD and siTD) are extended to support the upper address bits provided by the segment register.
In addition, a descriptor-addr-offset property is introduced so platforms can apply an address translation when descriptor memory resides above the 4GB boundary.
The AST2700 machine uses this property to account for its DRAM mapping at 0x400000000 and enables 64-bit EHCI DMA addressing.
Test Result:
1. EHCI 32bits with ast2600-evb machine
Command line:
./build/qemu-system-arm \
-machine ast2600-evb \
-m 1G \
-drive file=image-bmc,if=mtd,format=raw \
-nographic \
-device usb-kbd,bus=usb-bus.1,id=mykbd \
-drive id=usbdisk,if=none,file=image0.ext4,format=raw \
-device usb-storage,bus=usb-bus.1,id=mystorage,drive=usbdisk
-snapshot \
-nographic
Result:
unable to initialize usb specBus 001 Device 001: ID 1d6b:0002 Linux 6.18.3-v00.08.01-g172b7e27a30d ehci_hcd EHCI Host Controller Bus 001 Device 002: ID 0627:0001 QEMU QEMU USB Keyboard
Bus 001 Device 003: ID 46f4:0001 QEMU QEMU USB HARDDRIVE
Bus 002 Device 001: ID 1d6b:0001 Linux 6.18.3-v00.08.01-g172b7e27a30d uhci_hcd Generic UHCI Host Controller
2. EHCI 64bits with ast2700a2-evb machine
Command line:
./build/qemu-system-aarch64 -M ast2700a2-evb -nographic\
-bios ast27x0_bootrom.bin \
-drive file=image-bmc,format=raw,if=mtd \
-snapshot \
-device usb-kbd,bus=usb-bus.3,id=mykbd \
-drive id=usbdisk,if=none,file=image0.ext4,format=raw \
-device usb-storage,bus=usb-bus.3,id=mystorage,drive=usbdisk
Result:
root@ast2700-default:~# lsusb unable to initialize usb specBus 001 Device 001: ID 1d6b:0001 Linux 6.18.3-v00.08.01-g172b7e27a30d uhci_hcd Generic UHCI Host Controller Bus 002 Device 001: ID 1d6b:0002 Linux 6.18.3-v00.08.01-g172b7e27a30d ehci_hcd EHCI Host Controller Bus 002 Device 002: ID 0627:0001 QEMU QEMU USB Keyboard Bus 002 Device 003: ID 46f4:0001 QEMU QEMU USB HARDDRIVE
v1
1. Fix checkpatch coding style issues
2. Implement 64-bit addressing for QH/qTD/iTD/siTD descriptors
3. Add descriptor address offset property
4. Enable 64-bit EHCI DMA addressing on AST2700
5. Configure descriptor address offset for AST2700
v2
1. Remove unused EHCIfstn structure and dead code
2. Replace fprintf(stderr, ...) with qemu_log_mask(LOG_GUEST_ERROR)
3. Replace DPRINTF debug logs with trace events
4. Add functional tests for USB EHCI on AST2600 and AST2700 A1/A2
5. Fix review issue
v3:
1. Add Migration version test function
2. Add EHCI 64-bit buffer pointer fields description in commit log
v4:
1. Reorder patches in the series
2. Fix EHCI migration issues
3. Introduce a common properties macro for both sysbus and PCI
4. Drop the descriptor address offset property
5. Add ctrldssegment-default property
6. Address review comments
Jamin Lin (17):
tests/functional/arm/test_aspeed_ast2600_sdk: Add USB EHCI test for
AST2600 SDK
hw/usb/hcd-ehci: Remove unused EHCIfstn structure and dead code
hw/usb/hcd-ehci.h: Fix coding style issues reported by checkpatch
hw/usb/hcd-ehci.c: Fix coding style issues reported by checkpatch
hw/usb/hcd-ehci.c: Replace fprintf(stderr, ...) with
qemu_log_mask(LOG_GUEST_ERROR)
hw/usb/hcd-ehci: Replace DPRINTF debug logs with trace events
hw/usb/hcd-ehci: Introduce common properties macro for sysbus and pci
hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration
compatibility
hw/usb/hcd-ehci: Add property to advertise 64-bit addressing
capability
hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit qTD descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit iTD descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit siTD descriptor addressing
hw/usb/hcd-ehci: Add ctrldssegment-default property
hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default
hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing
tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for
AST2700 A1/A2hw/usb/hcd-ehci.h | 64 +-- hw/arm/aspeed_ast27x0.c | 4 + hw/core/machine.c | 2 + hw/usb/hcd-ehci-pci.c | 2 +- hw/usb/hcd-ehci-sysbus.c | 2 +- hw/usb/hcd-ehci.c | 382 +++++++++++------- hw/usb/trace-events | 25 +- .../aarch64/test_aspeed_ast2700a1.py | 7 + .../aarch64/test_aspeed_ast2700a2.py | 7 + .../functional/arm/test_aspeed_ast2600_sdk.py | 7 + 10 files changed, 313 insertions(+), 189 deletions(-)
Signature · 1 line
2.43.0
PATCH v4 1/17 tests/functional/arm/test_aspeed_ast2600_sdk: Add USB EHCI test for AST2600 SDK
Add a functional test to verify USB EHCI support on the AST2600 SDK machine by attaching a USB keyboard device and checking its enumeration via lsusb.
This introduces a helper routine that runs lsusb in the guest and validates that the emulated "QEMU USB Keyboard" is detected.
--- tests/functional/arm/test_aspeed_ast2600_sdk.py | 7 +++++++ 1 file changed, 7 insertions(+)
tests/functional/arm/test_aspeed_ast2600_sdk.py +7 -0
@@ -40,6 +40,11 @@ def do_ast2600_i3c_test(self): 'i3ctransfer -d /dev/bus/i3c/5-1234567890ab -r 8 | grep 0x | xargs', '0x12 0x34 0x56 0x78 0x90 0xab 0xcd 0xef') + def do_ast2600_usb_ehci_test(self): + exec_command_and_wait_for_pattern(self, + 'lsusb', + 'QEMU QEMU USB Keyboard') + def test_arm_ast2600_evb_sdk(self): self.set_machine('ast2600-evb') self.require_netdev('user')
@@ -54,6 +59,7 @@ def test_arm_ast2600_evb_sdk(self): self.vm.add_args('-netdev', 'user,id=net1') self.vm.add_args('-device', 'mock-i3c-target,bus=dw.i3c.5,pid=0xab9078563412') + self.vm.add_args('-device', 'usb-kbd,bus=usb-bus.1') self.do_test_arm_aspeed_sdk_start( self.scratch_file("ast2600-default-image", "image-bmc"))
@@ -81,6 +87,7 @@ def test_arm_ast2600_evb_sdk(self): '/sbin/hwclock -f /dev/rtc1', year) self.do_ast2600_pcie_test() self.do_ast2600_i3c_test() + self.do_ast2600_usb_ehci_test() if __name__ == '__main__':
Signature · 1 line
2.43.0
PATCH v4 2/17 hw/usb/hcd-ehci: Remove unused EHCIfstn structure and dead code
In reply to Jamin LinThe EHCIfstn structure, defined according to EHCI spec section 3.7, is currently unused in the EHCI implementation. Remove it to reduce unused code and improve maintainability.
Additionally, drop a block of disabled (#if 0) code in ehci_state_advqueue() that was never implemented. This code path is incomplete and has no functional impact.
No functional change.
--- hw/usb/hcd-ehci.h | 7 ------- hw/usb/hcd-ehci.c | 6 ------ 2 files changed, 13 deletions(-)
hw/usb/hcd-ehci.h +0 -7
@@ -202,13 +202,6 @@ typedef struct EHCIqh {#define BUFPTR_SBYTES_SH 5 } EHCIqh; -/* EHCI spec version 1.0 Section 3.7 -*/ -typedef struct EHCIfstn { -uint32_t next;/* Standard next link pointer */ -uint32_t backptr;/* Standard next link pointer */ -}EHCIfstn ; -enum async_state {EHCI_ASYNC_NONE =0 ,EHCI_ASYNC_INITIALIZED ,
hw/usb/hcd-ehci.c +0 -6
@@ -1756,16 +1756,10 @@ static int ehci_state_fetchsitd(EHCIState *ehci, int async)/* Section 4.10.2 - paragraph 3 */ static int ehci_state_advqueue (EHCIQueue *q) { -#if 0 /* TO-DO: 4.10.2 - paragraph 2 * if I-bit is set to 1 and QH is not active * go to horizontal QH */ - if (I-bit set) { -ehci_set_state (ehci, async,EST_HORIZONTALQH ); - goto out; - } -#endif /* * want data and alt-next qTD is valid
Signature · 1 line
2.43.0
PATCH v4 3/17 hw/usb/hcd-ehci.h: Fix coding style issues reported by checkpatch
In reply to Jamin LinNo functional change.
--- hw/usb/hcd-ehci.h | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
hw/usb/hcd-ehci.h +11 -6
@@ -43,7 +43,8 @@ typedef struct EHCIPacket EHCIPacket;typedef struct EHCIQueue EHCIQueue ;typedef struct EHCIState EHCIState ; -/* EHCI spec version 1.0 Section 3.3 +/* +* EHCI spec version 1.0 Section 3.3 */ typedef struct EHCIitd { uint32_t next;
@@ -74,7 +75,8 @@ typedef struct EHCIitd {#define ITD_BUFPTR_MULT_SH 0 } EHCIitd; -/* EHCI spec version 1.0 Section 3.4 +/* +* EHCI spec version 1.0 Section 3.4 */ typedef struct EHCIsitd { uint32_t next; /* Standard next link pointer */
@@ -118,7 +120,8 @@ typedef struct EHCIsitd {uint32_t backptr;/* Standard next link pointer */ } EHCIsitd; -/* EHCI spec version 1.0 Section 3.5 +/* +* EHCI spec version 1.0 Section 3.5 */ typedef struct EHCIqtd { uint32_t next; /* Standard next link pointer */
@@ -148,7 +151,8 @@ typedef struct EHCIqtd {#define QTD_BUFPTR_SH 12 } EHCIqtd; -/* EHCI spec version 1.0 Section 3.6 +/* +* EHCI spec version 1.0 Section 3.6 */ typedef struct EHCIqh { uint32_t next; /* Standard next link pointer */
@@ -230,7 +234,8 @@ struct EHCIQueue {int async;int transact_ctr; -/* cached data from guest - needs to be flushed +/* +* cached data from guest - needs to be flushed * when guest removes an entry (doorbell, handshake sequence) */ EHCIqh qh;/* copy of current QH (being worked on) */
@@ -268,7 +273,7 @@ struct EHCIState {*/ uint8_t caps[CAPA_SIZE ];union { -uint32_t opreg[0x44 /sizeof (uint32_t )]; +uint32_t opreg[0x44 /sizeof (uint32_t )];struct {uint32_t usbcmd;uint32_t usbsts;
Signature · 1 line
2.43.0
PATCH v4 4/17 hw/usb/hcd-ehci.c: Fix coding style issues reported by checkpatch
In reply to Jamin LinNo functional change.
--- hw/usb/hcd-ehci.c | 129 +++++++++++++++++++++++++--------------------- 1 file changed, 71 insertions(+), 58 deletions(-)
hw/usb/hcd-ehci.c +71 -58
@@ -41,21 +41,23 @@#define FRAME_TIMER_NS (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ)#define UFRAME_TIMER_NS (FRAME_TIMER_NS / 8) -#define NB_MAXINTRATE 8 // Max rate at which controller issues ints -#define BUFF_SIZE 5*4096 // Max bytes to transfer per transaction -#define MAX_QH 100 // Max allowable queue heads in a chain +#define NB_MAXINTRATE 8/* Max rate at which controller issues ints */ +#define BUFF_SIZE (5 * 4096)/* Max bytes to transfer per transaction */ +#define MAX_QH 100/* Max allowable queue heads in a chain */ #define MIN_UFR_PER_TICK 24/* Min frames to process when catching up */ #define PERIODIC_ACTIVE 512/* Micro-frames */ -/* Internal periodic / asynchronous schedule state machine states +/* +* Internal periodic / asynchronous schedule state machine states */ typedef enum { EST_INACTIVE = 1000, EST_ACTIVE, EST_EXECUTING, EST_SLEEPING, - /* The following states are internal to the state machine function - */ + /* + * The following states are internal to the state machine function + */ EST_WAITLISTHEAD, EST_FETCHENTRY, EST_FETCHQH,
@@ -71,13 +73,13 @@ typedef enum {/* macros for accessing fields within next link pointer entry */ #define NLPTR_GET (x) ((x) & 0xffffffe0)#define NLPTR_TYPE_GET (x) (((x) >> 1) & 3) -#define NLPTR_TBIT (x) ((x) & 1) // 1=invalid, 0=valid +#define NLPTR_TBIT (x) ((x) & 1)/* 1=invalid, 0=valid */ /* link pointer types */ -#define NLPTR_TYPE_ITD 0 // isoc xfer descriptor -#define NLPTR_TYPE_QH 1 // queue head -#define NLPTR_TYPE_STITD 2 // split xaction, isoc xfer descriptor -#define NLPTR_TYPE_FSTN 3 // frame span traversal node +#define NLPTR_TYPE_ITD 0/* isoc xfer descriptor */ +#define NLPTR_TYPE_QH 1/* queue head */ +#define NLPTR_TYPE_STITD 2/* split xaction, isoc xfer descriptor */ +#define NLPTR_TYPE_FSTN 3/* frame span traversal node */ #define SET_LAST_RUN_CLOCK (s) \ (s)->last_run_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
@@ -88,10 +90,10 @@ typedef enum {#define set_field (data, newval, field) do { \ uint32_t val = *data; \ - val &= ~ field##_MASK; \ + val &= ~field##_MASK; \ val |= ((newval) << field##_SH) & field##_MASK; \ *data = val; \ - } while(0) + } while (0)static const char *ehci_state_names[] = { [EST_INACTIVE ] ="INACTIVE" ,
@@ -472,8 +474,10 @@ static bool ehci_verify_pid(EHCIQueue *q, EHCIqtd *qtd) } } -/* Finish executing and writeback a packet outside of the regular -fetchqh -> fetchqtd -> execute -> writeback cycle */ +/* +* Finish executing and writeback a packet outside of the regular +* fetchqh -> fetchqtd -> execute -> writeback cycle +*/ static void ehci_writeback_async_complete_packet (EHCIPacket *p) {EHCIQueue *q = p->queue;
@@ -733,7 +737,7 @@ static void ehci_detach(USBPort *port)ehci_queues_rip_device (s, port->dev,0 );ehci_queues_rip_device (s, port->dev,1 ); - *portsc &= ~(PORTSC_CONNECT |PORTSC_PED |PORTSC_SUSPEND ); + *portsc &= ~(PORTSC_CONNECT |PORTSC_PED |PORTSC_SUSPEND ); *portsc |=PORTSC_CSC ;ehci_raise_irq (s,USBSTS_PCD );
@@ -858,7 +862,7 @@ void ehci_reset(void *opaque)* Do the detach before touching portsc, so that it correctly gets send to * us or to our companion based on PORTSC_POWNER before the reset. */ -for (i =0 ; i <EHCI_PORTS ; i++) { +for (i =0 ; i <EHCI_PORTS ; i++) { devs[i] = s->ports[i].dev;if (devs[i] && devs[i]->attached) {usb_detach (&s->ports[i]);
@@ -877,7 +881,7 @@ void ehci_reset(void *opaque) s->astate =EST_INACTIVE ; s->pstate =EST_INACTIVE ; -for (i =0 ; i <EHCI_PORTS ; i++) { +for (i =0 ; i <EHCI_PORTS ; i++) {if (s->companion_ports[i]) { s->portsc[i] =PORTSC_POWNER |PORTSC_PPOWER ; }else {
@@ -942,8 +946,9 @@ static void handle_port_owner_write(EHCIState *s, int port, uint32_t owner)uint32_t *portsc = &s->portsc[port];uint32_t orig; -if (s->companion_ports[port] ==NULL ) +if (s->companion_ports[port] ==NULL ) {return ; + } owner = owner &PORTSC_POWNER ; orig = *portsc &PORTSC_POWNER ;
@@ -988,7 +993,7 @@ static void ehci_port_write(void *ptr, hwaddr addr,trace_usb_ehci_port_reset (port,1 ); } -if (!(val &PORTSC_PRESET ) &&(*portsc &PORTSC_PRESET )) { +if (!(val &PORTSC_PRESET ) && (*portsc &PORTSC_PRESET )) {trace_usb_ehci_port_reset (port,0 );if (dev && dev->attached) {usb_port_reset (&s->ports[port]);
@@ -1065,8 +1070,10 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,break ;case USBSTS : - val &=USBSTS_RO_MASK ;// bits 6 through 31 are RO -ehci_clear_usbsts (s, val);// bits 0 through 5 are R/WC +/* bits 6 through 31 are RO */ + val &=USBSTS_RO_MASK ; +/* bits 0 through 5 are R/WC */ +ehci_clear_usbsts (s, val); val = s->usbsts;ehci_update_irq (s);break ;
@@ -1131,8 +1138,7 @@ static void ehci_flush_qh(EHCIQueue *q)put_dwords (q->ehci, addr +3 *sizeof (uint32_t ), qh +3 , dwords -3 ); } -// 4.10.2 - +/* 4.10.2 */ static int ehci_qh_do_overlay (EHCIQueue *q) {EHCIPacket *p =QTAILQ_FIRST (&q->packets);
@@ -1145,8 +1151,7 @@ static int ehci_qh_do_overlay(EHCIQueue *q)assert (p !=NULL );assert (p->qtdaddr == q->qtdaddr); -// remember values in fields to preserve in qh after overlay - +/* remember values in fields to preserve in qh after overlay */ dtoggle = q->qh.token &QTD_TOKEN_DTOGGLE ; ping = q->qh.token &QTD_TOKEN_PING ;
@@ -1170,7 +1175,7 @@ static int ehci_qh_do_overlay(EHCIQueue *q) }if (!(q->qh.epchar &QH_EPCHAR_DTC )) { -// preserve QH DT bit +/* preserve QH DT bit */ q->qh.token &= ~QTD_TOKEN_DTOGGLE ; q->qh.token |= dtoggle; }
@@ -1397,9 +1402,7 @@ static int ehci_execute(EHCIPacket *p, const char *action)return 1 ; } -/* 4.7.2 -*/ - +/* 4.7.2 */ static int ehci_process_itd (EHCIState *ehci,EHCIitd *itd,uint32_t addr)
@@ -1411,13 +1414,13 @@ static int ehci_process_itd(EHCIState *ehci, ehci->periodic_sched_active =PERIODIC_ACTIVE ; - dir =(itd->bufptr[1 ] &ITD_BUFPTR_DIRECTION ); + dir = (itd->bufptr[1 ] &ITD_BUFPTR_DIRECTION ); devaddr =get_field (itd->bufptr[0 ],ITD_BUFPTR_DEVADDR ); endp =get_field (itd->bufptr[0 ],ITD_BUFPTR_EP ); max =get_field (itd->bufptr[1 ],ITD_BUFPTR_MAXPKT ); mult =get_field (itd->bufptr[2 ],ITD_BUFPTR_MULT ); -for (i =0 ; i <8 ; i++) { +for (i =0 ; i <8 ; i++) {if (itd->transact[i] &ITD_XACT_ACTIVE ) { pg =get_field (itd->transact[i],ITD_XACT_PGSEL ); off = itd->transact[i] &ITD_XACT_OFFSET_MASK ;
@@ -1513,8 +1516,9 @@ static int ehci_process_itd(EHCIState *ehci, } -/* This state is the entry point for asynchronous schedule -* processing. Entry here constitutes a EHCI start event state (4.8.5) +/* +* This state is the entry point for asynchronous schedule +* processing. Entry here constitutes a EHCI start event state (4.8.5) */ static int ehci_state_waitlisthead (EHCIState *ehci,int async) {
@@ -1531,7 +1535,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci, int async)ehci_queues_rip_unused (ehci, async);/* Find the head of the list (4.9.1.1) */ -for (i =0 ; i <MAX_QH ; i++) { +for (i =0 ; i <MAX_QH ; i++) {if (get_dwords (ehci,NLPTR_GET (entry), (uint32_t *) &qh,sizeof (EHCIqh) >>2 ) <0 ) {return 0 ;
@@ -1564,8 +1568,9 @@ out: } -/* This state is the entry point for periodic schedule processing as -* well as being a continuation state for async processing. +/* +* This state is the entry point for periodic schedule processing as +* well as being a continuation state for async processing. */ static int ehci_state_fetchentry (EHCIState *ehci,int async) {
@@ -1674,7 +1679,7 @@ static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async)#if EHCI_DEBUG if (q->qhaddr != q->qh.next) { - DPRINTF("FETCHQH: QH 0x%08x (h %x halt %x active %x) next 0x%08x\n", + DPRINTF("FETCHQH: QH 0x%08x (h %x halt %x active %x) next 0x%08x\n", q->qhaddr, q->qh.epchar & QH_EPCHAR_H, q->qh.token & QTD_TOKEN_HALT,
@@ -1756,7 +1761,8 @@ static int ehci_state_fetchsitd(EHCIState *ehci, int async)/* Section 4.10.2 - paragraph 3 */ static int ehci_state_advqueue (EHCIQueue *q) { -/* TO-DO: 4.10.2 - paragraph 2 +/* +* TO-DO: 4.10.2 - paragraph 2 * if I-bit is set to 1 and QH is not active * go to horizontal QH */
@@ -1929,8 +1935,10 @@ static int ehci_state_execute(EHCIQueue *q)return -1 ; } -// TODO verify enough time remains in the uframe as in 4.4.1.1 -// TODO write back ptr to async list when done or out of time +/* +* TODO verify enough time remains in the uframe as in 4.4.1.1 +* TODO write back ptr to async list when done or out of time +*/ /* 4.10.3, bottom of page 82, go horizontal on transaction counter == 0 */ if (!q->async && q->transact_ctr ==0 ) {
@@ -2041,7 +2049,7 @@ static void ehci_advance_state(EHCIState *ehci, int async)int again; do { - switch(ehci_get_state(ehci, async)) { + switch (ehci_get_state(ehci, async)) { case EST_WAITLISTHEAD: again = ehci_state_waitlisthead(ehci, async); break;
@@ -2120,21 +2128,20 @@ static void ehci_advance_state(EHCIState *ehci, int async)ehci_reset (ehci); again =0 ; } - } -while (again); + }while (again); }static void ehci_advance_async_state (EHCIState *ehci) {const int async =1 ; -switch (ehci_get_state (ehci, async)) { +switch (ehci_get_state (ehci, async)) {case EST_INACTIVE :if (!ehci_async_enabled (ehci)) {break ; }ehci_set_state (ehci, async,EST_ACTIVE ); -// No break, fall through to ACTIVE +/* No break, fall through to ACTIVE */ case EST_ACTIVE :if (!ehci_async_enabled (ehci)) {
@@ -2158,7 +2165,8 @@ static void ehci_advance_async_state(EHCIState *ehci)ehci_set_state (ehci, async,EST_WAITLISTHEAD );ehci_advance_state (ehci, async); -/* If the doorbell is set, the guest wants to make a change to the +/* +* If the doorbell is set, the guest wants to make a change to the * schedule. The host controller needs to release cached data. * (section 4.8.2) */
@@ -2185,13 +2193,13 @@ static void ehci_advance_periodic_state(EHCIState *ehci)uint32_t list;const int async =0 ; -// 4.6 +/* 4.6 */ -switch (ehci_get_state (ehci, async)) { +switch (ehci_get_state (ehci, async)) {case EST_INACTIVE :if (!(ehci->frindex &7 ) &&ehci_periodic_enabled (ehci)) {ehci_set_state (ehci, async,EST_ACTIVE ); -// No break, fall through to ACTIVE +/* No break, fall through to ACTIVE */ }else break ;
@@ -2215,7 +2223,7 @@ static void ehci_advance_periodic_state(EHCIState *ehci)DPRINTF ("PERIODIC state adv fr=%d. [%08X] -> %08X\n" , ehci->frindex /8 , list, entry); -ehci_set_fetch_addr (ehci, async,entry); +ehci_set_fetch_addr (ehci, async, entry);ehci_set_state (ehci, async,EST_FETCHENTRY );ehci_advance_state (ehci, async);ehci_queues_rip_unused (ehci, async);
@@ -2240,7 +2248,8 @@ static void ehci_update_frindex(EHCIState *ehci, int uframes)ehci_raise_irq (ehci,USBSTS_FLR ); } -/* How many times will frindex roll over 0x4000 with this frame count? +/* +* How many times will frindex roll over 0x4000 with this frame count? * usbsts_frindex is decremented by 0x4000 on rollover until it reaches 0 */ int rollovers = (ehci->frindex + uframes) /0x4000 ;
@@ -2320,8 +2329,9 @@ static void ehci_work_bh(void *opaque) ehci->async_stepdown++; } -/* Async is not inside loop since it executes everything it can once -* called +/* +* Async is not inside loop since it executes everything it can once +* called */ if (ehci_async_enabled (ehci) || ehci->astate !=EST_INACTIVE ) { need_timer++;
@@ -2339,15 +2349,18 @@ static void ehci_work_bh(void *opaque) }if (need_timer) { -/* If we've raised int, we speed up the timer, so that we quickly -* notice any new packets queued up in response */ +/* +* If we've raised int, we speed up the timer, so that we quickly +* notice any new packets queued up in response +*/ if (ehci->int_req_by_async && (ehci->usbsts &USBSTS_INT )) { expire_time = t_now +NANOSECONDS_PER_SECOND / (FRAME_TIMER_FREQ *4 ); ehci->int_req_by_async = false; }else { - expire_time = t_now + (NANOSECONDS_PER_SECOND - * (ehci->async_stepdown+1 ) /FRAME_TIMER_FREQ ); + expire_time = t_now + + (NANOSECONDS_PER_SECOND * (ehci->async_stepdown +1 ) / +FRAME_TIMER_FREQ ); }timer_mod (ehci->frame_timer, expire_time); }
Signature · 1 line
2.43.0
PATCH v4 5/17 hw/usb/hcd-ehci.c: Replace fprintf(stderr, ...) with qemu_log_mask(LOG_GUEST_ERROR)
In reply to Jamin LinReplace direct fprintf(stderr, ...) calls with qemu_log_mask() using LOG_GUEST_ERROR in the EHCI controller implementation.
Direct writes to stderr are discouraged in QEMU as they bypass the logging framework and cannot be filtered or controlled at runtime. Using qemu_log_mask() ensures that guest-visible errors are properly categorized and can be managed via QEMU logging options.
All affected messages correspond to guest-triggerable error conditions, so LOG_GUEST_ERROR is used consistently.
This change improves integration with QEMU's logging infrastructure and aligns with upstream coding guidelines.
--- hw/usb/hcd-ehci.c | 46 +++++++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 21 deletions(-)
hw/usb/hcd-ehci.c +25 -21
@@ -36,6 +36,7 @@#include "qemu/error-report.h" #include "qemu/main-loop.h" #include "system/runstate.h" +#include "qemu/log.h" #define FRAME_TIMER_FREQ 1000#define FRAME_TIMER_NS (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ)
@@ -425,7 +426,7 @@ static int ehci_get_pid(EHCIqtd *qtd)case 2 :return USB_TOKEN_SETUP ;default : -fprintf (stderr,"bad token\n" ); +qemu_log_mask (LOG_GUEST_ERROR ,"bad token\n" );return 0 ; } }
@@ -532,7 +533,7 @@ static void ehci_free_packet(EHCIPacket *p) }if (p->async ==EHCI_ASYNC_FINISHED && p->packet.status ==USB_RET_SUCCESS ) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"EHCI: Dropping completed packet from halted %s ep %02X\n" , (p->pid ==USB_TOKEN_IN ) ?"in" :"out" ,get_field (p->queue->qh.epchar,QH_EPCHAR_EP ));
@@ -1042,8 +1043,9 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,/* not supporting dynamic frame list size at the moment */ if ((val &USBCMD_FLS ) && !(s->usbcmd &USBCMD_FLS )) { -fprintf (stderr,"attempt to set frame list size -- value %d\n" , - (int )val &USBCMD_FLS ); +qemu_log_mask (LOG_GUEST_ERROR , +"attempt to set frame list size -- value %" PRId64 +"\n" , val &USBCMD_FLS ); val &= ~USBCMD_FLS ; }
@@ -1101,7 +1103,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,case PERIODICLISTBASE :if (ehci_periodic_enabled (s)) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"ehci: PERIODIC list base register set while periodic schedule\n" " is enabled and HC is enabled\n" ); }
@@ -1109,7 +1111,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,case ASYNCLISTADDR :if (ehci_async_enabled (s)) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"ehci: ASYNC list address register set while async schedule\n" " is enabled and HC is enabled\n" ); }
@@ -1200,7 +1202,7 @@ static int ehci_init_transfer(EHCIPacket *p)while (bytes >0 ) {if (cpage >4 ) { -fprintf (stderr,"cpage out of range (%u)\n" , cpage); +qemu_log_mask (LOG_GUEST_ERROR ,"cpage out of range (%u)\n" , cpage);qemu_sglist_destroy (&p->sgl);return -1 ; }
@@ -1306,7 +1308,8 @@ static void ehci_execute_complete(EHCIQueue *q)break ;default :/* should not be triggerable */ -fprintf (stderr,"USB invalid response %d\n" , p->packet.status); +qemu_log_mask (LOG_GUEST_ERROR ,"USB invalid response %d\n" , + p->packet.status);g_assert_not_reached (); }
@@ -1354,7 +1357,7 @@ static int ehci_execute(EHCIPacket *p, const char *action) p->async == EHCI_ASYNC_INITIALIZED);if (!(p->qtd.token &QTD_TOKEN_ACTIVE )) { -fprintf (stderr,"Attempting to execute inactive qtd\n" ); +qemu_log_mask (LOG_GUEST_ERROR ,"Attempting to execute inactive qtd\n" );return -1 ; }
@@ -1395,7 +1398,8 @@ static int ehci_execute(EHCIPacket *p, const char *action) p->packet.actual_length);if (p->packet.actual_length >BUFF_SIZE ) { -fprintf (stderr,"ret from usb_handle_packet > BUFF_SIZE\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"ret from usb_handle_packet > BUFF_SIZE\n" );return -1 ; }
@@ -1479,8 +1483,9 @@ static int ehci_process_itd(EHCIState *ehci,case USB_RET_SUCCESS :break ;default : -fprintf (stderr,"Unexpected iso usb result: %d\n" , - ehci->ipacket.status); +qemu_log_mask (LOG_GUEST_ERROR , +"Unexpected iso usb result: %d\n" , + ehci->ipacket.status);/* Fall through */ case USB_RET_IOERROR :case USB_RET_NODEV :
@@ -1584,7 +1589,8 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)/* section 4.8, only QH in async schedule */ if (async && (NLPTR_TYPE_GET (entry) !=NLPTR_TYPE_QH )) { -fprintf (stderr,"non queue head request in async schedule\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"non queue head request in async schedule\n" );return -1 ; }
@@ -1606,8 +1612,10 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)default :/* TODO: handle FSTN type */ -fprintf (stderr,"FETCHENTRY: entry at %X is of type %u " -"which is not supported yet\n" , entry,NLPTR_TYPE_GET (entry)); +qemu_log_mask (LOG_GUEST_ERROR , +"FETCHENTRY: entry at 0x%x is of type %u " +"which is not supported yet\n" , + entry,NLPTR_TYPE_GET (entry));return -1 ; }
@@ -2118,13 +2126,13 @@ static void ehci_advance_state(EHCIState *ehci, int async)break ;default : -fprintf (stderr,"Bad state!\n" );g_assert_not_reached (); }if (again <0 || itd_count >16 ) {/* TODO: notify guest (raise HSE irq?) */ -fprintf (stderr,"processing error - resetting ehci HC\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"processing error - resetting ehci HC\n" );ehci_reset (ehci); again =0 ; }
@@ -2181,8 +2189,6 @@ static void ehci_advance_async_state(EHCIState *ehci)default :/* this should only be due to a developer mistake */ -fprintf (stderr,"ehci: Bad asynchronous state %d. " -"Resetting to active\n" , ehci->astate);g_assert_not_reached (); } }
@@ -2231,8 +2237,6 @@ static void ehci_advance_periodic_state(EHCIState *ehci)default :/* this should only be due to a developer mistake */ -fprintf (stderr,"ehci: Bad periodic state %d. " -"Resetting to active\n" , ehci->pstate);g_assert_not_reached (); } }
Signature · 1 line
2.43.0
Re: [PATCH v4 05/17] hw/usb/hcd-ehci.c: Replace fprintf(stderr, ...) with qemu_log_mask(LOG_GUEST_ERROR)
Quoted 179 lines · Jamin Lin
Replace direct
fprintf(stderr, ...)calls withqemu_log_mask()usingLOG_GUEST_ERRORin the EHCI controller implementation.Direct writes to stderr are discouraged in QEMU as they bypass the logging framework and cannot be filtered or controlled at runtime. Using
qemu_log_mask()ensures that guest-visible errors are properly categorized and can be managed via QEMU logging options.All affected messages correspond to guest-triggerable error conditions, so
LOG_GUEST_ERRORis used consistently.This change improves integration with QEMU's logging infrastructure and aligns with upstream coding guidelines.
Signed-off-by Jamin Lin <[email protected]>--- hw/usb/hcd-ehci.c | 46 +++++++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 21 deletions(-)hw/usb/hcd-ehci.c +25
-19@@ -36,6 +36,7 @@#include "qemu/error-report.h" #include "qemu/main-loop.h" #include "system/runstate.h" +#include "qemu/log.h" #define FRAME_TIMER_FREQ 1000#define FRAME_TIMER_NS (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ)@@ -425,7 +426,7 @@ static int ehci_get_pid(EHCIqtd *qtd)case 2 :return USB_TOKEN_SETUP ;default : -fprintf (stderr,"bad token\n" ); +qemu_log_mask (LOG_GUEST_ERROR ,"bad token\n" );return 0 ; } }@@ -532,7 +533,7 @@ static void ehci_free_packet(EHCIPacket *p) }if (p->async ==EHCI_ASYNC_FINISHED && p->packet.status ==USB_RET_SUCCESS ) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"EHCI: Dropping completed packet from halted %s ep %02X\n" , (p->pid ==USB_TOKEN_IN ) ?"in" :"out" ,get_field (p->queue->qh.epchar,QH_EPCHAR_EP ));@@ -1042,8 +1043,9 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,/* not supporting dynamic frame list size at the moment */ if ((val &USBCMD_FLS ) && !(s->usbcmd &USBCMD_FLS )) { -fprintf (stderr,"attempt to set frame list size -- value %d\n" , - (int )val &USBCMD_FLS ); +qemu_log_mask (LOG_GUEST_ERROR , +"attempt to set frame list size -- value %" PRId64 +"\n" , val &USBCMD_FLS ); val &= ~USBCMD_FLS ; }@@ -1101,7 +1103,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,case PERIODICLISTBASE :if (ehci_periodic_enabled (s)) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"ehci: PERIODIC list base register set while periodic schedule\n" " is enabled and HC is enabled\n" ); }@@ -1109,7 +1111,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,case ASYNCLISTADDR :if (ehci_async_enabled (s)) { -fprintf (stderr, +qemu_log_mask (LOG_GUEST_ERROR ,"ehci: ASYNC list address register set while async schedule\n" " is enabled and HC is enabled\n" ); }@@ -1200,7 +1202,7 @@ static int ehci_init_transfer(EHCIPacket *p)while (bytes >0 ) {if (cpage >4 ) { -fprintf (stderr,"cpage out of range (%u)\n" , cpage); +qemu_log_mask (LOG_GUEST_ERROR ,"cpage out of range (%u)\n" , cpage);qemu_sglist_destroy (&p->sgl);return -1 ; }@@ -1306,7 +1308,8 @@ static void ehci_execute_complete(EHCIQueue *q)break ;default :/* should not be triggerable */ -fprintf (stderr,"USB invalid response %d\n" , p->packet.status); +qemu_log_mask (LOG_GUEST_ERROR ,"USB invalid response %d\n" , + p->packet.status);g_assert_not_reached (); }@@ -1354,7 +1357,7 @@ static int ehci_execute(EHCIPacket *p, const char *action) p->async == EHCI_ASYNC_INITIALIZED);if (!(p->qtd.token &QTD_TOKEN_ACTIVE )) { -fprintf (stderr,"Attempting to execute inactive qtd\n" ); +qemu_log_mask (LOG_GUEST_ERROR ,"Attempting to execute inactive qtd\n" );return -1 ; }@@ -1395,7 +1398,8 @@ static int ehci_execute(EHCIPacket *p, const char *action) p->packet.actual_length);if (p->packet.actual_length >BUFF_SIZE ) { -fprintf (stderr,"ret from usb_handle_packet > BUFF_SIZE\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"ret from usb_handle_packet > BUFF_SIZE\n" );return -1 ; }@@ -1479,8 +1483,9 @@ static int ehci_process_itd(EHCIState *ehci,case USB_RET_SUCCESS :break ;default : -fprintf (stderr,"Unexpected iso usb result: %d\n" , - ehci->ipacket.status); +qemu_log_mask (LOG_GUEST_ERROR , +"Unexpected iso usb result: %d\n" , + ehci->ipacket.status);/* Fall through */ case USB_RET_IOERROR :case USB_RET_NODEV :@@ -1584,7 +1589,8 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)/* section 4.8, only QH in async schedule */ if (async && (NLPTR_TYPE_GET (entry) !=NLPTR_TYPE_QH )) { -fprintf (stderr,"non queue head request in async schedule\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"non queue head request in async schedule\n" );return -1 ; }@@ -1606,8 +1612,10 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)default :/* TODO: handle FSTN type */ -fprintf (stderr,"FETCHENTRY: entry at %X is of type %u " -"which is not supported yet\n" , entry,NLPTR_TYPE_GET (entry)); +qemu_log_mask (LOG_GUEST_ERROR , +"FETCHENTRY: entry at 0x%x is of type %u " +"which is not supported yet\n" , + entry,NLPTR_TYPE_GET (entry));return -1 ; }@@ -2118,13 +2126,13 @@ static void ehci_advance_state(EHCIState *ehci, int async)break ;default : -fprintf (stderr,"Bad state!\n" );g_assert_not_reached (); }if (again <0 || itd_count >16 ) {/* TODO: notify guest (raise HSE irq?) */ -fprintf (stderr,"processing error - resetting ehci HC\n" ); +qemu_log_mask (LOG_GUEST_ERROR , +"processing error - resetting ehci HC\n" );ehci_reset (ehci); again =0 ; }@@ -2181,8 +2189,6 @@ static void ehci_advance_async_state(EHCIState *ehci)default :/* this should only be due to a developer mistake */ -fprintf (stderr,"ehci: Bad asynchronous state %d. " -"Resetting to active\n" , ehci->astate);g_assert_not_reached (); } }
hw/usb/hcd-ehci.c static void ehci_advance_periodic_state(EHCIState *ehci) · line 2242
Quoted 8 lines
hw/usb/hcd-ehci.c +0
-2@@ -2231,8 +2237,6 @@ static void ehci_advance_periodic_state(EHCIState *ehci)default :/* this should only be due to a developer mistake */ -fprintf (stderr,"ehci: Bad periodic state %d. " -"Resetting to active\n" , ehci->pstate);g_assert_not_reached (); } }
Thanks,
C.
PATCH v4 6/17 hw/usb/hcd-ehci: Replace DPRINTF debug logs with trace events
In reply to Jamin LinReplace legacy DPRINTF() debug logging in the EHCI host controller implementation with QEMU trace events.
The EHCI_DEBUG macro and associated DPRINTF() definitions are removed as they are no longer needed.
Trace events are added for:
- packet submission and completion
- queue head execution state
- periodic schedule advancement
- ITD error conditions
- port state handling
- skipped microframes
No functional change.
--- hw/usb/hcd-ehci.h | 10 --------- hw/usb/hcd-ehci.c | 49 +++++++++++++++++++-------------------------- hw/usb/trace-events | 9 +++++++++ 3 files changed, 30 insertions(+), 38 deletions(-)
hw/usb/hcd-ehci.h +0 -10
@@ -24,16 +24,6 @@#include "hw/pci/pci_device.h" #include "hw/core/sysbus.h" -#ifndef EHCI_DEBUG -#define EHCI_DEBUG 0 -#endif - -#if EHCI_DEBUG -#define DPRINTF printf -#else -#define DPRINTF (...) -#endif -#define MMIO_SIZE 0x1000#define CAPA_SIZE 0x10
hw/usb/hcd-ehci.c +21 -28
110 lines not on this page · raw message
hw/usb/trace-events +9 -0
@@ -89,6 +89,7 @@ usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ 0x%08x: next 0x%08x qtds 0x%08x,0x%08x,0x%08x" usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ 0x%08x - rl %d, mplen %d, eps %d, ep %d, dev %d" usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ 0x%08x - c %d, h %d, dtc %d, i %d" +usb_ehci_qh_tbytes(uint32_t tbytes) "updating tbytes to %d" usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ 0x%08x: next 0x%08x altnext 0x%08x" usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ 0x%08x - tbytes %d, cpage %d, cerr %d, pid %d" usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ 0x%08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
@@ -100,13 +101,21 @@ usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d" usb_ehci_port_suspend(uint32_t port) "port #%d" usb_ehci_port_wakeup(uint32_t port) "port #%d" usb_ehci_port_resume(uint32_t port) "port #%d" +usb_ehci_port_disable(uint32_t port) "port #%d" usb_ehci_queue_action(void *q, const char *action) "q %p: %s" usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s" +usb_ehci_packet_submit(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int pid, size_t len, int endp, int status, int actual_length) "qh=0x%x, next=0x%x, qtd=0x%x, pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d" usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x" usb_ehci_guest_bug(const char *reason) "%s" usb_ehci_doorbell_ring(void) "" usb_ehci_doorbell_ack(void) "" usb_ehci_dma_error(void) "" +usb_ehci_execute_complete(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int status, int actual_length) "qhaddr=0x%x, next=0x%x, qtdaddr=0x%x, status=%d, actual_length=%d" +usb_ehci_fetchqh_reclaim_done(uint32_t qhaddr) "QH 0x%08x H-bit set, reclamation status reset - done processing" +usb_ehci_fetchqh_dbg(uint32_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%08x (h 0x%x halt 0x%x active 0x%x) next 0x%08x" +usb_ehci_periodic_state_advance(uint32_t frame, uint32_t list, uint32_t entry) "frame=%d, list=0x%x, entry=0x%x" +usb_ehci_skipped_uframes(uint64_t skipped_uframes) "skipped %" PRIu64 " uframes" +usb_ehci_log(const char *msg) "%s" # hcd-uhci.c usb_uhci_reset(void) "=== RESET ==="
Signature · 1 line
2.43.0
PATCH v4 7/17 hw/usb/hcd-ehci: Introduce common properties macro for sysbus and pci
In reply to Jamin LinEHCI properties are currently defined separately in both sysbus and PCI implementations, leading to duplicated code for common fields such as "maxframes".
Introduce DEFINE_EHCI_COMMON_PROPERTIES() to consolidate shared property definitions and reuse them across both EHCISysBusState and EHCIPCIState.
This reduces code duplication and keeps property definitions consistent between different EHCI device variants.
No functional change.
--- hw/usb/hcd-ehci.h | 3 +++ hw/usb/hcd-ehci-pci.c | 2 +- hw/usb/hcd-ehci-sysbus.c | 2 +- 3 files changed, 5 insertions(+), 2 deletions(-)
hw/usb/hcd-ehci.h +3 -0
@@ -307,6 +307,9 @@ struct EHCIState {VMChangeStateEntry *vmstate; }; +#define DEFINE_EHCI_COMMON_PROPERTIES (_state) \ + DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128) +extern const VMStateDescription vmstate_ehci;void usb_ehci_init (EHCIState *s,DeviceState *dev);
hw/usb/hcd-ehci-pci.c +1 -1
@@ -136,7 +136,7 @@ static void usb_ehci_pci_write_config(PCIDevice *dev, uint32_t addr, }static const Property ehci_pci_properties[] = { -DEFINE_PROP_UINT32 ("maxframes" , EHCIPCIState, ehci.maxframes,128 ), +DEFINE_EHCI_COMMON_PROPERTIES (EHCIPCIState), };static const VMStateDescription vmstate_ehci_pci = {
hw/usb/hcd-ehci-sysbus.c +1 -1
@@ -31,7 +31,7 @@ static const VMStateDescription vmstate_ehci_sysbus = { };static const Property ehci_sysbus_properties[] = { -DEFINE_PROP_UINT32 ("maxframes" , EHCISysBusState, ehci.maxframes,128 ), +DEFINE_EHCI_COMMON_PROPERTIES (EHCISysBusState),DEFINE_PROP_BOOL ("companion-enable" , EHCISysBusState, ehci.companion_enable, false), };
Signature · 1 line
2.43.0
PATCH v4 8/17 hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
In reply to Jamin LinChange internal EHCI descriptor addresses from uint32_t to uint64_t.
The following fields are updated:
- EHCIPacket::qtdaddr
- EHCIQueue::{qhaddr, qtdaddr}
- EHCIState::{a_fetch_addr, p_fetch_addr}
Update get_dwords() and put_dwords() to take 64-bit addresses and propagate the type change through the descriptor traversal paths.
Adjust NLPTR_GET() to operate on 64-bit values:
#define NLPTR_GET(x) ((x) & ~0x1fULL)
so that link pointer masking works correctly when descriptor addresses exceed 32-bit space. The previous mask (0xffffffe0) implicitly truncated addresses to 32 bits.
This patch does not change the on-wire descriptor layout yet. It only removes the internal 32-bit address limit and prepares for later patches that will add full 64-bit QH/qTD/iTD/siTD support.
Update the EHCI trace-events prototypes for QH, qTD, iTD, and siTD to use uint64_t for the address argument and print it with PRIx64. This ensures full 64-bit addresses are shown in trace output and improves debugging of queue heads and transfer descriptors.
Migration compatibility:
To preserve backward migration compatibility, keep the legacy 32-bit fetch address fields (a_fetch_addr_32, p_fetch_addr_32) alongside the new 64-bit fields.
Migration format is selected using a machine compat property "x-migrate-fetch-addr-64bit":
- Old machine types migrate 32-bit fetch addresses
- New machine types migrate full 64-bit fetch addresses
This is implemented using VMSTATE_UINT32_TEST() and VMSTATE_UINT64_TEST() so that only the appropriate format is migrated.
In pre_save, the 32-bit shadow fields are populated when migrating to old machine types. In post_load, the 32-bit values are restored into the 64-bit fields when loading old migration streams.
No functional change.
--- hw/usb/hcd-ehci.h | 17 +++++++---- hw/core/machine.c | 2 ++ hw/usb/hcd-ehci.c | 72 ++++++++++++++++++++++++++++++++------------- hw/usb/trace-events | 24 +++++++-------- 4 files changed, 76 insertions(+), 39 deletions(-)
hw/usb/hcd-ehci.h +11 -6
@@ -208,7 +208,7 @@ struct EHCIPacket {QTAILQ_ENTRY (EHCIPacket) next;EHCIqtd qtd;/* copy of current QTD (being worked on) */ -uint32_t qtdaddr;/* address QTD read from */ +uint64_t qtdaddr;/* address QTD read from */ USBPacket packet;QEMUSGList sgl;
@@ -229,8 +229,8 @@ struct EHCIQueue {* when guest removes an entry (doorbell, handshake sequence) */ EHCIqh qh;/* copy of current QH (being worked on) */ -uint32_t qhaddr;/* address QH read from */ -uint32_t qtdaddr;/* address QTD read from */ +uint64_t qhaddr;/* address QH read from */ +uint64_t qtdaddr;/* address QTD read from */ int last_pid;/* pid of last packet executed */ USBDevice *dev; QTAILQ_HEAD(, EHCIPacket) packets;
@@ -256,6 +256,7 @@ struct EHCIState {/* properties */ uint32_t maxframes; +bool migrate_fetch_addr_64bit;/* * EHCI spec version 1.0 Section 2.3
@@ -294,8 +295,10 @@ struct EHCIState {EHCIQueueHead pqueues;/* which address to look at next */ -uint32_t a_fetch_addr; -uint32_t p_fetch_addr; +uint32_t a_fetch_addr_32; +uint32_t p_fetch_addr_32; +uint64_t a_fetch_addr; +uint64_t p_fetch_addr;USBPacket ipacket;QEMUSGList isgl;
@@ -308,7 +311,9 @@ struct EHCIState { };#define DEFINE_EHCI_COMMON_PROPERTIES (_state) \ - DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128) + DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \ + DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \ + ehci.migrate_fetch_addr_64bit, true)extern const VMStateDescription vmstate_ehci;
hw/core/machine.c +2 -0
@@ -41,6 +41,8 @@GlobalProperty hw_compat_10_2[] = { {"scsi-block" ,"migrate-pr" ,"off" }, {"isa-cirrus-vga" ,"global-vmstate" ,"true" }, + {"sysbus-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, + {"pci-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, };const size_t hw_compat_10_2_len =G_N_ELEMENTS (hw_compat_10_2);
hw/usb/hcd-ehci.c +51 -21
208 lines not on this page · raw message
hw/usb/trace-events +12 -12
@@ -86,15 +86,15 @@ usb_ehci_portsc_write(uint32_t addr, uint32_t port, uint32_t val) "wr mmio 0x%04 usb_ehci_portsc_change(uint32_t addr, uint32_t port, uint32_t new, uint32_t old) "ch mmio 0x%04x [port %d] = 0x%x (old: 0x%x)" usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d" usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" -usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ 0x%08x: next 0x%08x qtds 0x%08x,0x%08x,0x%08x" -usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ 0x%08x - rl %d, mplen %d, eps %d, ep %d, dev %d" -usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ 0x%08x - c %d, h %d, dtc %d, i %d" +usb_ehci_qh_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ 0x%" PRIx64 ": next 0x%08x qtds 0x%08x,0x%08x,0x%08x" +usb_ehci_qh_fields(uint64_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ 0x%" PRIx64 " - rl %d, mplen %d, eps %d, ep %d, dev %d" +usb_ehci_qh_bits(uint64_t addr, int c, int h, int dtc, int i) "QH @ 0x%" PRIx64 " - c %d, h %d, dtc %d, i %d" usb_ehci_qh_tbytes(uint32_t tbytes) "updating tbytes to %d" -usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ 0x%08x: next 0x%08x altnext 0x%08x" -usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ 0x%08x - tbytes %d, cpage %d, cerr %d, pid %d" -usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ 0x%08x - ioc %d, active %d, halt %d, babble %d, xacterr %d" -usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ 0x%08x: next 0x%08x - mplen %d, mult %d, ep %d, dev %d" -usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ 0x%08x: next 0x%08x - active %d" +usb_ehci_qtd_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ 0x%" PRIx64 ": next 0x%08x altnext 0x%08x" +usb_ehci_qtd_fields(uint64_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ 0x%" PRIx64 " - tbytes %d, cpage %d, cerr %d, pid %d" +usb_ehci_qtd_bits(uint64_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ 0x%" PRIx64 " - ioc %d, active %d, halt %d, babble %d, xacterr %d" +usb_ehci_itd(uint64_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ 0x%" PRIx64 ": next 0x%08x - mplen %d, mult %d, ep %d, dev %d" +usb_ehci_sitd(uint64_t addr, uint32_t nxt, uint32_t active) "SITD @ 0x%" PRIx64 ": next 0x%08x - active %d" usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s" usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s" usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
@@ -104,15 +104,15 @@ usb_ehci_port_resume(uint32_t port) "port #%d" usb_ehci_port_disable(uint32_t port) "port #%d" usb_ehci_queue_action(void *q, const char *action) "q %p: %s" usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s" -usb_ehci_packet_submit(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int pid, size_t len, int endp, int status, int actual_length) "qh=0x%x, next=0x%x, qtd=0x%x, pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d" +usb_ehci_packet_submit(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr, int pid, size_t len, int endp, int status, int actual_length) "qh=0x%" PRIx64 ", next=0x%x, qtd=0x%" PRIx64 ", pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d" usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x" usb_ehci_guest_bug(const char *reason) "%s" usb_ehci_doorbell_ring(void) "" usb_ehci_doorbell_ack(void) "" usb_ehci_dma_error(void) "" -usb_ehci_execute_complete(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int status, int actual_length) "qhaddr=0x%x, next=0x%x, qtdaddr=0x%x, status=%d, actual_length=%d" -usb_ehci_fetchqh_reclaim_done(uint32_t qhaddr) "QH 0x%08x H-bit set, reclamation status reset - done processing" -usb_ehci_fetchqh_dbg(uint32_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%08x (h 0x%x halt 0x%x active 0x%x) next 0x%08x" +usb_ehci_execute_complete(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr, int status, int actual_length) "qhaddr=0x%" PRIx64 ", next=0x%x, qtdaddr=0x%" PRIx64 ", status=%d, actual_length=%d" +usb_ehci_fetchqh_reclaim_done(uint64_t qhaddr) "QH 0x%" PRIx64 " H-bit set, reclamation status reset - done processing" +usb_ehci_fetchqh_dbg(uint64_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%" PRIx64 " (h 0x%x halt 0x%x active 0x%x) next 0x%08x" usb_ehci_periodic_state_advance(uint32_t frame, uint32_t list, uint32_t entry) "frame=%d, list=0x%x, entry=0x%x" usb_ehci_skipped_uframes(uint64_t skipped_uframes) "skipped %" PRIu64 " uframes" usb_ehci_log(const char *msg) "%s"
Signature · 1 line
2.43.0
Re: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
Hello Jamin,
Quoted 42 lines · Jamin Lin
Change internal EHCI descriptor addresses from
uint32_ttouint64_t.The following fields are updated:
-EHCIPacket::qtdaddr
- EHCIQueue::{qhaddr, qtdaddr}
- EHCIState::{a_fetch_addr,p_fetch_addr}Update
get_dwords()andput_dwords()to take 64-bit addresses and propagate the type change through the descriptor traversal paths.Adjust
NLPTR_GET()to operate on 64-bit values:#define NLPTR_GET(x) ((x) & ~0x1fULL)so that link pointer masking works correctly when descriptor addresses exceed 32-bit space. The previous mask (
0xffffffe0) implicitly truncated addresses to 32 bits.This patch does not change the on-wire descriptor layout yet. It only removes the internal 32-bit address limit and prepares for later patches that will add full 64-bit QH/qTD/iTD/siTD support.
Update the EHCI trace-events prototypes for QH, qTD, iTD, and siTD to use
uint64_tfor the address argument and print it with PRIx64. This ensures full 64-bit addresses are shown in trace output and improves debugging of queue heads and transfer descriptors.Migration compatibility:
To preserve backward migration compatibility, keep the legacy 32-bit fetch address fields (
a_fetch_addr_32,p_fetch_addr_32) alongside the new 64-bit fields.Migration format is selected using a machine compat property "x-migrate-fetch-addr-64bit":
- Old machine types migrate 32-bit fetch addresses
- New machine types migrate full 64-bit fetch addressesThis is implemented using
VMSTATE_UINT32_TEST()andVMSTATE_UINT64_TEST()so that only the appropriate format is migrated.
Quoted 8 lines
In
pre_save, the 32-bit shadow fields are populated when migrating to old machine types. Inpost_load, the 32-bit values are restored into the 64-bit fields when loading old migration streams.No functional change.
Signed-off-by Jamin Lin <[email protected]>Reviewed-by Philippe Mathieu-Daudé <[email protected]>
This patch was reworked significantly to handle migration and I don't think Philippe's Reviewed-by stands anymore.
Could you please explain how you tested ? QEMU command lines, which OS, etc. ?
Thanks,
C.
Quoted 358 lines
--- hw/usb/hcd-ehci.h | 17 +++++++---- hw/core/machine.c | 2 ++ hw/usb/hcd-ehci.c | 72 ++++++++++++++++++++++++++++++++------------- hw/usb/trace-events | 24 +++++++-------- 4 files changed, 76 insertions(+), 39 deletions(-)hw/usb/hcd-ehci.h +11
-6@@ -208,7 +208,7 @@ struct EHCIPacket {QTAILQ_ENTRY (EHCIPacket) next;EHCIqtd qtd;/* copy of current QTD (being worked on) */ -uint32_t qtdaddr;/* address QTD read from */ +uint64_t qtdaddr;/* address QTD read from */ USBPacket packet;QEMUSGList sgl;@@ -229,8 +229,8 @@ struct EHCIQueue {* when guest removes an entry (doorbell, handshake sequence) */ EHCIqh qh;/* copy of current QH (being worked on) */ -uint32_t qhaddr;/* address QH read from */ -uint32_t qtdaddr;/* address QTD read from */ +uint64_t qhaddr;/* address QH read from */ +uint64_t qtdaddr;/* address QTD read from */ int last_pid;/* pid of last packet executed */ USBDevice *dev; QTAILQ_HEAD(, EHCIPacket) packets;@@ -256,6 +256,7 @@ struct EHCIState {/* properties */ uint32_t maxframes; +bool migrate_fetch_addr_64bit;/* * EHCI spec version 1.0 Section 2.3 @@ -294,8 +295,10 @@ struct EHCIState {EHCIQueueHead pqueues;/* which address to look at next */ -uint32_t a_fetch_addr; -uint32_t p_fetch_addr; +uint32_t a_fetch_addr_32; +uint32_t p_fetch_addr_32; +uint64_t a_fetch_addr; +uint64_t p_fetch_addr;USBPacket ipacket;QEMUSGList isgl;@@ -308,7 +311,9 @@ struct EHCIState { };#define DEFINE_EHCI_COMMON_PROPERTIES (_state) \ - DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128) + DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \ + DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \ + ehci.migrate_fetch_addr_64bit, true)extern const VMStateDescription vmstate_ehci;hw/core/machine.c +2
-0@@ -41,6 +41,8 @@GlobalProperty hw_compat_10_2[] = { {"scsi-block" ,"migrate-pr" ,"off" }, {"isa-cirrus-vga" ,"global-vmstate" ,"true" }, + {"sysbus-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, + {"pci-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, };const size_t hw_compat_10_2_len =G_N_ELEMENTS (hw_compat_10_2);hw/usb/hcd-ehci.c +51
-21@@ -72,7 +72,7 @@ typedef enum { }EHCI_STATES ;/* macros for accessing fields within next link pointer entry */ -#define NLPTR_GET (x) ((x) & 0xffffffe0) +#define NLPTR_GET (x) ((x) & ~0x1fULL)#define NLPTR_TYPE_GET (x) (((x) >> 1) & 3)#define NLPTR_TBIT (x) ((x) & 1)/* 1=invalid, 0=valid */ @@ -287,7 +287,7 @@ static int ehci_get_state(EHCIState *s, int async)return async ? s->astate : s->pstate; } -static void ehci_set_fetch_addr (EHCIState *s,int async,uint32_t addr) +static void ehci_set_fetch_addr (EHCIState *s,int async,uint64_t addr) {if (async) { s->a_fetch_addr = addr;@@ -296,7 +296,7 @@ static void ehci_set_fetch_addr(EHCIState *s, int async, uint32_t addr) } } -static int ehci_get_fetch_addr (EHCIState *s,int async) +static uint64_t ehci_get_fetch_addr (EHCIState *s,int async) {return async ? s->a_fetch_addr : s->p_fetch_addr; }@@ -373,7 +373,7 @@ static inline bool ehci_periodic_enabled(EHCIState *s) }/* Get an array of dwords from main memory */ -static inline int get_dwords (EHCIState *ehci,uint32_t addr, +static inline int get_dwords (EHCIState *ehci,uint64_t addr,uint32_t *buf,int num) {int i;@@ -395,7 +395,7 @@ static inline int get_dwords(EHCIState *ehci, uint32_t addr, }/* Put an array of dwords in to main memory */ -static inline int put_dwords (EHCIState *ehci,uint32_t addr, +static inline int put_dwords (EHCIState *ehci,uint64_t addr,uint32_t *buf,int num) {int i;@@ -549,7 +549,7 @@ static void ehci_free_packet(EHCIPacket *p)/* queue management */ -static EHCIQueue *ehci_alloc_queue (EHCIState *ehci,uint32_t addr,int async) +static EHCIQueue *ehci_alloc_queue (EHCIState *ehci,uint64_t addr,int async) {EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;EHCIQueue *q;@@ -622,7 +622,7 @@ static void ehci_free_queue(EHCIQueue *q, const char *warn)g_free (q); } -static EHCIQueue *ehci_find_queue_by_qh (EHCIState *ehci,uint32_t addr, +static EHCIQueue *ehci_find_queue_by_qh (EHCIState *ehci,uint64_t addr,int async) {EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;@@ -1135,7 +1135,7 @@ static void ehci_flush_qh(EHCIQueue *q) {uint32_t *qh = (uint32_t *) &q->qh;uint32_t dwords =sizeof (EHCIqh) >>2 ; -uint32_t addr =NLPTR_GET (q->qhaddr); +uint64_t addr =NLPTR_GET (q->qhaddr);put_dwords (q->ehci, addr +3 *sizeof (uint32_t ), qh +3 , dwords -3 ); }@@ -1406,12 +1406,13 @@ static int ehci_execute(EHCIPacket *p, const char *action)/* 4.7.2 */ static int ehci_process_itd (EHCIState *ehci,EHCIitd *itd, -uint32_t addr) +uint64_t addr) {USBDevice *dev;USBEndpoint *ep;uint32_t i, len, pid, dir, devaddr, endp; -uint32_t pg, off, ptr1, ptr2, max, mult; +uint32_t pg, off, max, mult; +uint64_t ptr1, ptr2; ehci->periodic_sched_active =PERIODIC_ACTIVE ;@@ -1528,7 +1529,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci, int async)EHCIqh qh;int i =0 ;int again =0 ; -uint32_t entry = ehci->asynclistaddr; +uint64_t entry = ehci->asynclistaddr;/* set reclamation flag at start event (4.8.6) */ if (async) {@@ -1578,7 +1579,7 @@ out:static int ehci_state_fetchentry (EHCIState *ehci,int async) {int again =0 ; -uint32_t entry =ehci_get_fetch_addr (ehci, async); +uint64_t entry =ehci_get_fetch_addr (ehci, async);if (NLPTR_TBIT (entry)) {ehci_set_state (ehci, async,EST_ACTIVE );@@ -1611,7 +1612,7 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)default :/* TODO: handle FSTN type */ qemu_log_mask (LOG_GUEST_ERROR , -"FETCHENTRY: entry at 0x%x is of type %u " +"FETCHENTRY: entry at %" PRIx64"is of type %" PRIu64"which is not supported yet\n" , entry,NLPTR_TYPE_GET (entry));return -1 ;@@ -1623,7 +1624,7 @@ out:static EHCIQueue *ehci_state_fetchqh (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIQueue *q;EHCIqh qh;@@ -1712,7 +1713,7 @@ out:static int ehci_state_fetchitd (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIitd itd;assert (!async);@@ -1738,7 +1739,7 @@ static int ehci_state_fetchitd(EHCIState *ehci, int async)static int ehci_state_fetchsitd (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIsitd sitd;assert (!async);@@ -1802,7 +1803,7 @@ static int ehci_state_fetchqtd(EHCIQueue *q)EHCIqtd qtd;EHCIPacket *p;int again =1 ; -uint32_t addr; +uint64_t addr; addr =NLPTR_GET (q->qtdaddr);if (get_dwords (q->ehci, addr +8 , &qtd.token,1 ) <0 ) {@@ -1885,7 +1886,7 @@ static int ehci_fill_queue(EHCIPacket *p)USBEndpoint *ep = p->packet.ep;EHCIQueue *q = p->queue;EHCIqtd qtd = p->qtd; -uint32_t qtdaddr; +uint64_t qtdaddr;for (;;) {if (NLPTR_TBIT (qtd.next) !=0 ) {@@ -2008,7 +2009,8 @@ static int ehci_state_executing(EHCIQueue *q)static int ehci_state_writeback (EHCIQueue *q) {EHCIPacket *p =QTAILQ_FIRST (&q->packets); -uint32_t *qtd, addr; +uint32_t *qtd; +uint64_t addr;int again =0 ;/* Write back the QTD from the QH area */ @@ -2414,6 +2416,18 @@ static USBBusOps ehci_bus_ops_standalone = { .wakeup_endpoint = ehci_wakeup_endpoint, }; +static bool ehci_fetch_addr_64_needed (void *opaque,int version_id) +{ +EHCIState *s = opaque; + +return s->migrate_fetch_addr_64bit; +} + +static bool ehci_fetch_addr_32_needed (void *opaque,int version_id) +{ +return !ehci_fetch_addr_64_needed (opaque, version_id); +} +static int usb_ehci_pre_save (void *opaque) {EHCIState *ehci = opaque;@@ -2424,6 +2438,11 @@ static int usb_ehci_pre_save(void *opaque) ehci->last_run_ns -= (ehci->frindex - new_frindex) *UFRAME_TIMER_NS ; ehci->frindex = new_frindex; +if (!ehci->migrate_fetch_addr_64bit) { + ehci->a_fetch_addr_32 = ehci->a_fetch_addr; + ehci->p_fetch_addr_32 = ehci->p_fetch_addr; + } +return 0 ; }@@ -2444,6 +2463,11 @@ static int usb_ehci_post_load(void *opaque, int version_id) } } +if (!s->migrate_fetch_addr_64bit) { + s->a_fetch_addr = s->a_fetch_addr_32; + s->p_fetch_addr = s->p_fetch_addr_32; + } +return 0 ; }@@ -2504,8 +2528,14 @@ const VMStateDescription vmstate_ehci = {/* schedule state */ VMSTATE_UINT32 (astate, EHCIState),VMSTATE_UINT32 (pstate, EHCIState), -VMSTATE_UINT32 (a_fetch_addr, EHCIState), -VMSTATE_UINT32 (p_fetch_addr, EHCIState), +VMSTATE_UINT32_TEST (a_fetch_addr_32, EHCIState, + ehci_fetch_addr_32_needed), +VMSTATE_UINT32_TEST (p_fetch_addr_32, EHCIState, + ehci_fetch_addr_32_needed), +VMSTATE_UINT64_TEST (a_fetch_addr, EHCIState, + ehci_fetch_addr_64_needed), +VMSTATE_UINT64_TEST (p_fetch_addr, EHCIState, + ehci_fetch_addr_64_needed), VMSTATE_END_OF_LIST() } };hw/usb/trace-events +12
-12@@ -86,15 +86,15 @@ usb_ehci_portsc_write(uint32_t addr, uint32_t port, uint32_t val) "wr mmio 0x%04 usb_ehci_portsc_change(uint32_t addr, uint32_t port, uint32_t new, uint32_t old) "ch mmio 0x%04x [port %d] = 0x%x (old: 0x%x)" usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d" usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" -usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ 0x%08x: next 0x%08x qtds 0x%08x,0x%08x,0x%08x" -usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ 0x%08x - rl %d, mplen %d, eps %d, ep %d, dev %d" -usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ 0x%08x - c %d, h %d, dtc %d, i %d" +usb_ehci_qh_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ 0x%" PRIx64 ": next 0x%08x qtds 0x%08x,0x%08x,0x%08x" +usb_ehci_qh_fields(uint64_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ 0x%" PRIx64 " - rl %d, mplen %d, eps %d, ep %d, dev %d" +usb_ehci_qh_bits(uint64_t addr, int c, int h, int dtc, int i) "QH @ 0x%" PRIx64 " - c %d, h %d, dtc %d, i %d" usb_ehci_qh_tbytes(uint32_t tbytes) "updating tbytes to %d" -usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ 0x%08x: next 0x%08x altnext 0x%08x" -usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ 0x%08x - tbytes %d, cpage %d, cerr %d, pid %d" -usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ 0x%08x - ioc %d, active %d, halt %d, babble %d, xacterr %d" -usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ 0x%08x: next 0x%08x - mplen %d, mult %d, ep %d, dev %d" -usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ 0x%08x: next 0x%08x - active %d" +usb_ehci_qtd_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ 0x%" PRIx64 ": next 0x%08x altnext 0x%08x" +usb_ehci_qtd_fields(uint64_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ 0x%" PRIx64 " - tbytes %d, cpage %d, cerr %d, pid %d" +usb_ehci_qtd_bits(uint64_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ 0x%" PRIx64 " - ioc %d, active %d, halt %d, babble %d, xacterr %d" +usb_ehci_itd(uint64_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ 0x%" PRIx64 ": next 0x%08x - mplen %d, mult %d, ep %d, dev %d" +usb_ehci_sitd(uint64_t addr, uint32_t nxt, uint32_t active) "SITD @ 0x%" PRIx64 ": next 0x%08x - active %d" usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s" usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s" usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"@@ -104,15 +104,15 @@ usb_ehci_port_resume(uint32_t port) "port #%d" usb_ehci_port_disable(uint32_t port) "port #%d" usb_ehci_queue_action(void *q, const char *action) "q %p: %s" usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s" -usb_ehci_packet_submit(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int pid, size_t len, int endp, int status, int actual_length) "qh=0x%x, next=0x%x, qtd=0x%x, pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d" +usb_ehci_packet_submit(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr, int pid, size_t len, int endp, int status, int actual_length) "qh=0x%" PRIx64 ", next=0x%x, qtd=0x%" PRIx64 ", pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d" usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x" usb_ehci_guest_bug(const char *reason) "%s" usb_ehci_doorbell_ring(void) "" usb_ehci_doorbell_ack(void) "" usb_ehci_dma_error(void) "" -usb_ehci_execute_complete(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr, int status, int actual_length) "qhaddr=0x%x, next=0x%x, qtdaddr=0x%x, status=%d, actual_length=%d" -usb_ehci_fetchqh_reclaim_done(uint32_t qhaddr) "QH 0x%08x H-bit set, reclamation status reset - done processing" -usb_ehci_fetchqh_dbg(uint32_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%08x (h 0x%x halt 0x%x active 0x%x) next 0x%08x" +usb_ehci_execute_complete(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr, int status, int actual_length) "qhaddr=0x%" PRIx64 ", next=0x%x, qtdaddr=0x%" PRIx64 ", status=%d, actual_length=%d" +usb_ehci_fetchqh_reclaim_done(uint64_t qhaddr) "QH 0x%" PRIx64 " H-bit set, reclamation status reset - done processing" +usb_ehci_fetchqh_dbg(uint64_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%" PRIx64 " (h 0x%x halt 0x%x active 0x%x) next 0x%08x" usb_ehci_periodic_state_advance(uint32_t frame, uint32_t list, uint32_t entry) "frame=%d, list=0x%x, entry=0x%x" usb_ehci_skipped_uframes(uint64_t skipped_uframes) "skipped %" PRIu64 " uframes" usb_ehci_log(const char *msg) "%s"
RE: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
Hi Cédric
Quoted 54 lines
Subject: Re: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
Hello Jamin,
Quoted 48 lines · Jamin Lin
Change internal EHCI descriptor addresses from
uint32_ttouint64_t.The following fields are updated:
-EHCIPacket::qtdaddr
- EHCIQueue::{qhaddr, qtdaddr}
- EHCIState::{a_fetch_addr,p_fetch_addr}Update
get_dwords()andput_dwords()to take 64-bit addresses and propagate the type change through the descriptor traversal paths.Adjust
NLPTR_GET()to operate on 64-bit values:#define NLPTR_GET(x) ((x) & ~0x1fULL)so that link pointer masking works correctly when descriptor addresses exceed 32-bit space. The previous mask (
0xffffffe0) implicitly truncated addresses to 32 bits.This patch does not change the on-wire descriptor layout yet. It only removes the internal 32-bit address limit and prepares for later patches that will add full 64-bit QH/qTD/iTD/siTD support.
Update the EHCI trace-events prototypes for QH, qTD, iTD, and siTD to use
uint64_tfor the address argument and print it with PRIx64. This ensures full 64-bit addresses are shown in trace output and improves debugging of queue heads and transfer descriptors.Migration compatibility:
To preserve backward migration compatibility, keep the legacy 32-bit fetch address fields (
a_fetch_addr_32,p_fetch_addr_32) alongside the new 64-bit fields.Migration format is selected using a machine compat property "x-migrate-fetch-addr-64bit":
- Old machine types migrate 32-bit fetch addresses
- New machine types migrate full 64-bit fetch addressesThis is implemented using
VMSTATE_UINT32_TEST()andVMSTATE_UINT64_TEST()so that only the appropriate format is migrated.In
pre_save, the 32-bit shadow fields are populated when migrating to old machine types. Inpost_load, the 32-bit values are restored into the 64-bit fields when loading old migration streams.No functional change.
Quoted 9 lines
Quoted 2 lines
Signed-off-by Jamin Lin <[email protected]>Reviewed-by Philippe Mathieu-Daudé <[email protected]>This patch was reworked significantly to handle migration and I don't think Philippe's Reviewed-by stands anymore.
Could you please explain how you tested ? QEMU command lines, which OS, etc. ?
The following are my test commands. I used the pc-q35-10.2 machine with the ubuntu-24.04-server-cloudimg-amd64 image.
A. 10.2 forward to 11.0 + my patch
1. QEMU version 10.2
./build-10.2/qemu-system-x86_64 -M pc-q35-10.2 -m 2G -serial mon:stdio -nographic \
-drive file=ubuntu-24.04-server-cloudimg-amd64.img,format=qcow2 \
-drive file=user-data.img,format=raw \
-device usb-ehci,id=myehci0 \
-drive id=usbdisk,if=none,file=image0.ext4,format=raw \
-device usb-storage,bus=myehci0.0,id=mystorage,drive=usbdisk(qemu) migrate tcp:127.0.0.1:4444
2. QEMU version 11.0 with my patches
./build/qemu-system-x86_64 -M pc-q35-10.2 -m 2G -serial mon:stdio -nographic \
-drive file=../qemu-migration-test/ubuntu-24.04-server-cloudimg-amd64.img,format=qcow2 \
-drive file=../qemu-migration-test/user-data.img,format=raw \
-device usb-ehci,id=myehci0 \
-drive id=usbdisk,if=none,file=../qemu-migration-test/image0.ext4,format=raw \
-device usb-storage,bus=myehci0.0,id=mystorage,drive=usbdisk \
-incoming tcp:0:4444Run step 2 first. Then run step 1 and enter monitor mode to issue:
(qemu) migrate tcp:127.0.0.1:4444
A. 11.0 + my patch backward to 10.2
1. QEMU version 10.2
./build-10.2/qemu-system-x86_64 -M pc-q35-10.2 -m 2G -serial mon:stdio -nographic \
-drive file=ubuntu-24.04-server-cloudimg-amd64.img,format=qcow2 \
-drive file=user-data.img,format=raw \
-device usb-ehci,id=myehci0 \
-drive id=usbdisk,if=none,file=image0.ext4,format=raw \
-device usb-storage,bus=myehci0.0,id=mystorage,drive=usbdisk \
-incoming tcp:0:44442. QEMU version 11.0 with my patches
./build/qemu-system-x86_64 -M pc-q35-10.2 -m 2G -serial mon:stdio -nographic \
-drive file=../qemu-migration-test/ubuntu-24.04-server-cloudimg-amd64.img,format=qcow2 \
-drive file=../qemu-migration-test/user-data.img,format=raw \
-device usb-ehci,id=myehci0 \
-drive id=usbdisk,if=none,file=../qemu-migration-test/image0.ext4,format=raw \
-device usb-storage,bus=myehci0.0,id=mystorage,drive=usbdisk(qemu) migrate tcp:127.0.0.1:4444
Run step 1 first. Then run step 2 and enter monitor mode to issue:
(qemu) migrate tcp:127.0.0.1:4444
The following logs are shown on the server side:
ubuntu login: ubuntu
Password:
Welcome to Ubuntu 24.04.4 LTS (GNU/Linux 6.8.0-106-generic x86_64)
ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 46f4:0001 QEMU QEMU USB HARDDRIVE ubuntu@ubuntu:~$ lspci 00:03.0 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 10) ubuntu@ubuntu:~$ sudo mount /dev/sdc /mnt ubuntu@ubuntu:~$ sha256sum /mnt/test_read_file 4bbda032a9c844dd34d2dd8754f67a510b2109734b9e6ac367efb13b6144038f /mnt/test_read_file
Thanks,
Jamin
Quoted 427 lines
Thanks,
C.
Quoted 4 lines
--- hw/usb/hcd-ehci.h | 17 +++++++---- hw/core/machine.c | 2 ++ hw/usb/hcd-ehci.c | 72++++++++++++++++++++++++++++++++-------------
hw/usb/hcd-ehci.h struct EHCIPacket { · line 210
Quoted 11 lines
hw/usb/trace-events | 24 +++++++-------- 4 files changed, 76 insertions(+), 39 deletions(-)hw/usb/hcd-ehci.h index renamed from hw/usb/hcd-ehci.h +0
-0
d038ee1e31..3acbddfc5c100644hw/usb/hcd-ehci.h +0
-0@@ -208,7 +208,7 @@ struct EHCIPacket {QTAILQ_ENTRY (EHCIPacket) next;EHCIqtd qtd;/* copy of current QTD (being worked on) */
hw/usb/hcd-ehci.h struct EHCIPacket { · line 211
Quoted 1 line
hw/usb/hcd-ehci.h +0
-1-uint32_t qtdaddr;/* address QTD read from */
hw/usb/hcd-ehci.h struct EHCIPacket { · line 211
Quoted 1 line
hw/usb/hcd-ehci.h +1
-0+uint64_t qtdaddr;/* address QTD read from */
hw/usb/hcd-ehci.h struct EHCIQueue { · line 231
Quoted 7 lines
hw/usb/hcd-ehci.h +0
-0USBPacket packet;QEMUSGList sgl;@@ -229,8 +229,8 @@ struct EHCIQueue {* when guest removes an entry (doorbell, handshake sequence) */ EHCIqh qh;/* copy of current QH (being worked on) */
hw/usb/hcd-ehci.h struct EHCIQueue { · line 232
Quoted 1 line
hw/usb/hcd-ehci.h +0
-1-uint32_t qhaddr;/* address QH read from */
hw/usb/hcd-ehci.h struct EHCIQueue { · line 233
Quoted 1 line
hw/usb/hcd-ehci.h +0
-1-uint32_t qtdaddr;/* address QTD read from */
hw/usb/hcd-ehci.h struct EHCIQueue { · line 232
Quoted 1 line
hw/usb/hcd-ehci.h +1
-0+uint64_t qhaddr;/* address QH read from */
hw/usb/hcd-ehci.h struct EHCIQueue { · line 233
Quoted 1 line
hw/usb/hcd-ehci.h +1
-0+uint64_t qtdaddr;/* address QTD read from */
hw/usb/hcd-ehci.c static void ehci_set_fetch_addr(EHCIState *s, int
Quoted 73 lines
hw/usb/hcd-ehci.h +0
-0int last_pid;/* pid of last packet executed */ USBDevice *dev; QTAILQ_HEAD(, EHCIPacket) packets; @@ -256,6 +256,7 @@ structEHCIState {
/* properties */ uint32_t maxframes;+ bool
migrate_fetch_addr_64bit;/*
* EHCI spec version 1.0 Section 2.3 @@ -294,8 +295,10 @@struct EHCIState { EHCIQueueHead pqueues; /* which address to look at next */hw/usb/hcd-ehci.h +7
-3-uint32_t a_fetch_addr; -uint32_t p_fetch_addr; +uint32_t a_fetch_addr_32; +uint32_t p_fetch_addr_32; +uint64_t a_fetch_addr; +uint64_t p_fetch_addr;USBPacket ipacket;QEMUSGList isgl;@@ -308,7 +311,9 @@ struct EHCIState { };#define DEFINE_EHCI_COMMON_PROPERTIES (_state) \ - DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128) + DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \ + DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \ + ehci.migrate_fetch_addr_64bit, true)extern const VMStateDescription vmstate_ehci;hw/core/machine.c index renamed from hw/core/machine.c +0
-0
0aa77a57e9..e77400c7ab100644hw/core/machine.c +2
-0@@ -41,6 +41,8 @@GlobalProperty hw_compat_10_2[] = { {"scsi-block" ,"migrate-pr" ,"off" }, {"isa-cirrus-vga" ,"global-vmstate" ,"true" }, + {"sysbus-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, + {"pci-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, };const size_t hw_compat_10_2_len =G_N_ELEMENTS (hw_compat_10_2);hw/usb/hcd-ehci.c index renamed from hw/usb/hcd-ehci.c +0
-0
28a60e4c1a..0c8bdb48ad100644hw/usb/hcd-ehci.c +3
-2@@ -72,7 +72,7 @@ typedef enum { }EHCI_STATES ;/* macros for accessing fields within next link pointer entry */ -#define NLPTR_GET (x) ((x) & 0xffffffe0) +#define NLPTR_GET (x) ((x) & ~0x1fULL)#define NLPTR_TYPE_GET (x) (((x) >> 1) & 3)#define NLPTR_TBIT (x) ((x) & 1)/* 1=invalid, 0=valid */ @@ -287,7 +287,7 @@ static int ehci_get_state(EHCIState *s, int async)return async ? s->astate : s->pstate; } -static void ehci_set_fetch_addr (EHCIState *s,int async,uint32_t addr) +static void ehci_set_fetch_addr(EHCIState *s, int async, uint64_t +addr) {if (async) { s->a_fetch_addr = addr;@@ -296,7 +296,7 @@ static void ehci_set_fetch_addr(EHCIState *s, intasync,
uint32_taddr)hw/usb/hcd-ehci.c static inline bool ehci_periodic_enabled(EHCIState
Quoted 9 lines
hw/usb/hcd-ehci.c +1
-1} } -static int ehci_get_fetch_addr (EHCIState *s,int async) +static uint64_t ehci_get_fetch_addr (EHCIState *s,int async) {return async ? s->a_fetch_addr : s->p_fetch_addr; }@@ -373,7 +373,7 @@ static inline bool ehci_periodic_enabled(EHCIState*s)
hw/usb/hcd-ehci.c static inline int get_dwords(EHCIState *ehci, uint32_t
Quoted 9 lines
hw/usb/hcd-ehci.c +1
-0} /* Get an array of dwords from main memory */ -static inline intget_dwords (EHCIState *ehci,uint32_t addr, +static inline int get_dwords (EHCIState *ehci,uint64_t addr, uint32_t *buf, int num) {int i;@@ -395,7 +395,7 @@ static inline int get_dwords(EHCIState *ehci, uint32_taddr,
hw/usb/hcd-ehci.c static void ehci_free_queue(EHCIQueue *q, const
Quoted 20 lines
hw/usb/hcd-ehci.c +3
-1} /* Put an array of dwords in to main memory */ -static inline intput_dwords (EHCIState *ehci,uint32_t addr, +static inline int put_dwords (EHCIState *ehci,uint64_t addr, uint32_t *buf, int num) {int i;@@ -549,7 +549,7 @@ static void ehci_free_packet(EHCIPacket *p)/* queue management */ -static EHCIQueue *ehci_alloc_queue (EHCIState *ehci,uint32_t addr, int async) +static EHCIQueue *ehci_alloc_queue (EHCIState *ehci,uint64_t addr, +int async) {EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;EHCIQueue *q;@@ -622,7 +622,7 @@ static void ehci_free_queue(EHCIQueue *q, constchar *warn)
hw/usb/hcd-ehci.c static int ehci_execute(EHCIPacket *p, const
Quoted 20 lines
hw/usb/hcd-ehci.c +3
-2g_free (q); } -static EHCIQueue *ehci_find_queue_by_qh (EHCIState *ehci,uint32_t addr, +static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint64_t +addr,int async) {EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues;@@ -1135,7 +1135,7 @@ static void ehci_flush_qh(EHCIQueue *q) {uint32_t *qh = (uint32_t *) &q->qh;uint32_t dwords =sizeof (EHCIqh) >>2 ; -uint32_t addr =NLPTR_GET (q->qhaddr); +uint64_t addr =NLPTR_GET (q->qhaddr);put_dwords (q->ehci, addr +3 *sizeof (uint32_t ), qh +3 , dwords -3 ); }@@ -1406,12 +1406,13 @@ static int ehci_execute(EHCIPacket *p, constchar *action)
hw/usb/hcd-ehci.c static int ehci_state_waitlisthead(EHCIState *ehci,
Quoted 16 lines
hw/usb/hcd-ehci.c +3
-2/* 4.7.2 */ static int ehci_process_itd (EHCIState *ehci,EHCIitd *itd, -uint32_t addr) +uint64_t addr) {USBDevice *dev;USBEndpoint *ep;uint32_t i, len, pid, dir, devaddr, endp; -uint32_t pg, off, ptr1, ptr2, max, mult; +uint32_t pg, off, max, mult; +uint64_t ptr1, ptr2; ehci->periodic_sched_active =PERIODIC_ACTIVE ;@@ -1528,7 +1529,7 @@ static int ehci_state_waitlisthead(EHCIState *ehci,int async)
Quoted 99 lines
hw/usb/hcd-ehci.c +2
-2EHCIqh qh;int i =0 ;int again =0 ; -uint32_t entry = ehci->asynclistaddr; +uint64_t entry = ehci->asynclistaddr;/* set reclamation flag at start event (4.8.6) */ if (async) {@@ -1578,7 +1579,7 @@ out:static int ehci_state_fetchentry (EHCIState *ehci,int async) {int again =0 ; -uint32_t entry =ehci_get_fetch_addr (ehci, async); +uint64_t entry =ehci_get_fetch_addr (ehci, async);if (NLPTR_TBIT (entry)) { ehci_set_state(ehci, async, EST_ACTIVE); @@ -1611,7 +1612,7@@ static int
ehci_state_fetchentry(EHCIState *ehci, int async)default: /* TODO: handle FSTN type */ qemu_log_mask(LOG_GUEST_ERROR,hw/usb/hcd-ehci.c +5
-4-"FETCHENTRY: entry at 0x%x is of type %u " +"FETCHENTRY: entry at %" PRIx64"is of type %" + PRIu64"which is not supported yet\n" , entry, NLPTR_TYPE_GET(entry));return -1 ;@@ -1623,7 +1624,7 @@ out:static EHCIQueue *ehci_state_fetchqh (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIQueue *q;EHCIqh qh;@@ -1712,7 +1713,7 @@ out:static int ehci_state_fetchitd (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIitd itd;assert (!async);@@ -1738,7 +1739,7 @@ static int ehci_state_fetchitd(EHCIState *ehci, int async)static int ehci_state_fetchsitd (EHCIState *ehci,int async) { -uint32_t entry; +uint64_t entry;EHCIsitd sitd;assert(!async);hw/usb/hcd-ehci.c +2
-2@@ -1802,7 +1803,7 @@ static int ehci_state_fetchqtd(EHCIQueue *q)EHCIqtd qtd;EHCIPacket *p;int again =1 ; -uint32_t addr; +uint64_t addr; addr =NLPTR_GET (q->qtdaddr);if (get_dwords (q->ehci, addr +8 , &qtd.token,1 ) <0 ) {@@ -1885,7 +1886,7 @@ static int ehci_fill_queue(EHCIPacket *p)USBEndpoint *ep = p->packet.ep;EHCIQueue *q = p->queue;EHCIqtd qtd = p->qtd; -uint32_t qtdaddr; +uint64_t qtdaddr;for (;;) { if (NLPTR_TBIT(qtd.next) != 0) { @@ -2008,7 +2009,8 @@static int
ehci_state_executing(EHCIQueue *q)
static intehci_state_writeback(EHCIQueue *q){ EHCIPacket *p = QTAILQ_FIRST(&q->packets);hw/usb/hcd-ehci.c +2
-1-uint32_t *qtd, addr; +uint32_t *qtd; +uint64_t addr;int again =0 ; /* Write back the QTD from the QH area */ @@ -2414,6 +2416,18@@ static USBBusOps
ehci_bus_ops_standalone= {
.wakeup_endpoint =ehci_wakeup_endpoint,
};hw/usb/hcd-ehci.c +8
-0+static bool ehci_fetch_addr_64_needed (void *opaque,int version_id) { +EHCIState *s = opaque; + +return s->migrate_fetch_addr_64bit; } + +static bool ehci_fetch_addr_32_needed (void *opaque,int version_id) { +return !ehci_fetch_addr_64_needed (opaque, version_id); } +static int usb_ehci_pre_save (void *opaque) {EHCIState *ehci = opaque;hw/usb/hcd-ehci.c static int usb_ehci_pre_save(void *opaque) · line 2438
Quoted 1 line
hw/usb/hcd-ehci.c +0
-0@@ -2424,6 +2438,11 @@ static int usb_ehci_pre_save(void *opaque) ehci->last_run_ns -= (ehci->frindex - new_frindex) *
UFRAME_TIMER_NS;hw/usb/hcd-ehci.c static int usb_ehci_post_load(void *opaque, int
Quoted 11 lines
hw/usb/hcd-ehci.c +5
-0ehci->frindex = new_frindex; +if (!ehci->migrate_fetch_addr_64bit) { + ehci->a_fetch_addr_32 = ehci->a_fetch_addr; + ehci->p_fetch_addr_32 = ehci->p_fetch_addr; + } +return 0 ; }@@ -2444,6 +2463,11 @@ static int usb_ehci_post_load(void *opaque, int
version_id)hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port,
Quoted 33 lines
hw/usb/hcd-ehci.c +13
-2} } +if (!s->migrate_fetch_addr_64bit) { + s->a_fetch_addr = s->a_fetch_addr_32; + s->p_fetch_addr = s->p_fetch_addr_32; + } +return 0 ; }@@ -2504,8 +2528,14 @@ const VMStateDescription vmstate_ehci = {/* schedule state */ VMSTATE_UINT32 (astate, EHCIState),VMSTATE_UINT32 (pstate, EHCIState), -VMSTATE_UINT32 (a_fetch_addr, EHCIState), -VMSTATE_UINT32 (p_fetch_addr, EHCIState), +VMSTATE_UINT32_TEST (a_fetch_addr_32, EHCIState, + ehci_fetch_addr_32_needed), +VMSTATE_UINT32_TEST (p_fetch_addr_32, EHCIState, + ehci_fetch_addr_32_needed), +VMSTATE_UINT64_TEST (a_fetch_addr, EHCIState, + ehci_fetch_addr_64_needed), +VMSTATE_UINT64_TEST (p_fetch_addr, EHCIState, + ehci_fetch_addr_64_needed), VMSTATE_END_OF_LIST() } };hw/usb/trace-events index renamed from hw/usb/trace-events +0
-0
0d4318dcf1..8c90688bb3100644hw/usb/trace-events +0
-0@@ -86,15 +86,15 @@ usb_ehci_portsc_write(uint32_t addr, uint32_t port,
uint32_tval) "wr mmio 0x%04hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 86
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_portsc_change(uint32_t addr, uint32_t port, uint32_t new,
uint32_told) "ch mmio 0x%04x [port %d] = 0x%x (old: 0x%x)"hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, uint32_t val) "wr mmio 0x%04
Quoted 3 lines
hw/usb/trace-events +0
-1usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d" usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" -usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd,
uint32_tn_qtd,uint32_ta_qtd) "q %p - QH @ 0x%08x: next 0x%08x qtds 0x%08x,0x%08x,0x%08x"hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 90
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, intdevaddr) "QH @ 0x%08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 91
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ 0x%08x - c%d, h %d, dtc %d, i %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 89
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qh_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t c_qtd,
uint32_tn_qtd,uint32_ta_qtd) "q %p - QH @ 0x%" PRIx64 ": next 0x%08x qtds 0x%08x,0x%08x,0x%08x"hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 90
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qh_fields(uint64_t addr, int rl, int mplen, int eps, int ep, intdevaddr) "QH @ 0x%" PRIx64 " - rl %d, mplen %d, eps %d, ep %d, dev %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 91
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qh_bits(uint64_t addr, int c, int h, int dtc, int i) "QH @ 0x%"PRIx64 " - c %d, h %d, dtc %d, i %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 93
Quoted 2 lines
hw/usb/trace-events +0
-1usb_ehci_qh_tbytes(uint32_t tbytes) "updating tbytes to %d" -usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q%p - QTD @ 0x%08x: next 0x%08x altnext 0x%08x"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 94
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid)"QTD @ 0x%08x - tbytes %d, cpage %d, cerr %d, pid %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 95
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, intxacterr) "QTD @ 0x%08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 96
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult,
uint32_tep,uint32_tdevaddr) "ITD @ 0x%08x: next 0x%08x - mplen %d, mult %d, ep %d, dev %d"hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 97
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ 0x%08x:next 0x%08x - active %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 93
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qtd_ptrs(void *q, uint64_t addr, uint32_t nxt, uint32_t altnext) "q%p - QTD @ 0x%" PRIx64 ": next 0x%08x altnext 0x%08x"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 94
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qtd_fields(uint64_t addr, int tbytes, int cpage, int cerr, int pid)"QTD @ 0x%" PRIx64 " - tbytes %d, cpage %d, cerr %d, pid %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 95
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_qtd_bits(uint64_t addr, int ioc, int active, int halt, int babble, intxacterr) "QTD @ 0x%" PRIx64 " - ioc %d, active %d, halt %d, babble %d, xacterr %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 96
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_itd(uint64_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult,
uint32_tep,uint32_tdevaddr) "ITD @ 0x%" PRIx64 ": next 0x%08x - mplen %d, mult %d, ep %d, dev %d"hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 97
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_sitd(uint64_t addr, uint32_t nxt, uint32_t active) "SITD @ 0x%"PRIx64 ": next 0x%08x - active %d"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 98
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_port_attach(uint32_t port, const char *owner, const char*device) "attach port #%d, owner %s, device %s"
hw/usb/trace-events usb_ehci_portsc_write(uint32_t addr, uint32_t port, · line 99
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_port_detach(uint32_t port, const char *owner) "detach port#%d, owner %s"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 106
Quoted 5 lines
hw/usb/trace-events +0
-0usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"@@ -104,15 +104,15 @@ usb_ehci_port_resume(uint32_t port) "port #%d" usb_ehci_port_disable(uint32_t port) "port #%d" usb_ehci_queue_action(void *q, const char *action) "q %p: %s" usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p:%s"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 107
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_packet_submit(uint32_t qhaddr, uint32_t next, uint32_t qtdaddr,int pid,
size_tlen, int endp, int status, intactual_length) "qh=0x%x, next=0x%x, qtd=0x%x, pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 107
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_packet_submit(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr,int pid,
size_tlen, int endp, int status, intactual_length) "qh=0x%" PRIx64 ", next=0x%x, qtd=0x%" PRIx64 ", pid=0x%x, len=%zd, endp=0x%x, status=%d, actual_length=%d"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 108
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask)"level %d, frindex 0x%04x, sts 0x%x, mask 0x%x"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d"
Quoted 5 lines
hw/usb/trace-events +0
-1usb_ehci_guest_bug(const char *reason) "%s" usb_ehci_doorbell_ring(void) "" usb_ehci_doorbell_ack(void) "" usb_ehci_dma_error(void) "" -usb_ehci_execute_complete(uint32_t qhaddr, uint32_t next, uint32_tqtdaddr, int status, int
actual_length) "qhaddr=0x%x, next=0x%x, qtdaddr=0x%x, status=%d, actual_length=%d"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 114
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_fetchqh_reclaim_done(uint32_t qhaddr) "QH 0x%08x H-bit set,reclamation status reset - done processing"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 115
Quoted 1 line
hw/usb/trace-events +0
-1-usb_ehci_fetchqh_dbg(uint32_t qhaddr, uint32_t h, uint32_t halt, uint32_tactive,
uint32_tnext) "QH 0x%08x (h 0x%x halt 0x%x active 0x%x) next 0x%08x"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 113
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_execute_complete(uint64_t qhaddr, uint32_t next, uint64_tqtdaddr, int status, int
actual_length) "qhaddr=0x%" PRIx64 ", next=0x%x, qtdaddr=0x%" PRIx64 ", status=%d, actual_length=%d"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 114
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_fetchqh_reclaim_done(uint64_t qhaddr) "QH 0x%" PRIx64 " H-bitset, reclamation status reset - done processing"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 115
Quoted 1 line
hw/usb/trace-events +1
-0+usb_ehci_fetchqh_dbg(uint64_t qhaddr, uint32_t h, uint32_t halt, uint32_tactive,
uint32_tnext) "QH 0x%" PRIx64 " (h 0x%x halt 0x%x active 0x%x) next 0x%08x"hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 116
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_periodic_state_advance(uint32_t frame, uint32_t list, uint32_tentry) "frame=%d, list=0x%x, entry=0x%x"
hw/usb/trace-events usb_ehci_port_resume(uint32_t port) "port #%d" · line 117
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_skipped_uframes(uint64_t skipped_uframes) "skipped %"PRIu64 " uframes"
Quoted 1 line
hw/usb/trace-events +0
-0usb_ehci_log(const char *msg) "%s"
Re: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
In reply to Jamin Linhw/core/machine.c line 46
Quoted 11 lines · Jamin Lin
hw/core/machine.c +2
-0@@ -41,6 +41,8 @@GlobalProperty hw_compat_10_2[] = { {"scsi-block" ,"migrate-pr" ,"off" }, {"isa-cirrus-vga" ,"global-vmstate" ,"true" }, + {"sysbus-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, + {"pci-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, };
Sorry I forgot to comment here previously: we just released 11.0, I think it means you want hw_compat_11_0[] now, otherwise someone using 11.0.0 released binary may hit issues migrating to some newer binaries before 11.1.
Signature · 1 line
Peter Xu
RE: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
Hi Peter,
Quoted 4 lines
Subject: Re: [PATCH v4 08/17] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
On Thu, Apr 23, 2026 at 05:18:15AM +0000, Jamin Lin wrote:
Quoted 16 lines
hw/core/machine.c line 46
Quoted 11 lines
hw/core/machine.c index renamed from hw/core/machine.c +0
-0
0aa77a57e9..e77400c7ab100644hw/core/machine.c +2
-0@@ -41,6 +41,8 @@GlobalProperty hw_compat_10_2[] = { {"scsi-block" ,"migrate-pr" ,"off" }, {"isa-cirrus-vga" ,"global-vmstate" ,"true" }, + {"sysbus-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, + {"pci-ehci-usb" ,"x-migrate-fetch-addr-64bit" ,"off" }, };Sorry I forgot to comment here previously: we just released 11.0, I think it means you want hw_compat_11_0[] now, otherwise someone using 11.0.0 released binary may hit issues migrating to some newer binaries before 11.1.
Thanks for the review and suggestion.
Will do
Jamin
Quoted 2 lines
--
Peter Xu
PATCH v4 9/17 hw/usb/hcd-ehci: Add property to advertise 64-bit addressing capability
In reply to Jamin LinIntroduce a new boolean property, "caps-64bit-addr", to control HCCPARAMS[0] (64-bit Addressing Capability).
When enabled, the EHCI controller advertises support for 64-bit address memory pointers as defined in the EHCI specification (Table 2-7, HCCPARAMS). This allows software to use the 64-bit data structure formats described in Appendix B.
When disabled (default), the controller reports 32-bit addressing capability and uses the standard 32-bit data structures.
The EHCI CTRLDSSEGMENT register provides the upper 32 bits [63:32] used to form 64-bit addresses for EHCI control data structures. Per EHCI 1.0 spec section 2.3.5, when the HCCPARAMS 64-bit Addressing Capability bit is zero, CTRLDSSEGMENT is not used: software cannot write it and reads must return zero.
Add a capability check in the operational register write handler and reject guest writes to CTRLDSSEGMENT when 64-bit addressing is not enabled.
--- hw/usb/hcd-ehci.h | 5 ++++- hw/usb/hcd-ehci.c | 14 +++++++++++++- 2 files changed, 17 insertions(+), 2 deletions(-)
hw/usb/hcd-ehci.h +4 -1
@@ -257,6 +257,7 @@ struct EHCIState {/* properties */ uint32_t maxframes;bool migrate_fetch_addr_64bit; +bool caps_64bit_addr;/* * EHCI spec version 1.0 Section 2.3
@@ -313,7 +314,9 @@ struct EHCIState {#define DEFINE_EHCI_COMMON_PROPERTIES (_state) \ DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \ DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \ - ehci.migrate_fetch_addr_64bit, true) + ehci.migrate_fetch_addr_64bit, true), \ + DEFINE_PROP_BOOL("caps-64bit-addr", _state, \ + ehci.caps_64bit_addr, false)extern const VMStateDescription vmstate_ehci;
hw/usb/hcd-ehci.c +13 -1
@@ -1109,6 +1109,15 @@ static void ehci_opreg_write(void *ptr, hwaddr addr, }break ; +case CTRLDSSEGMENT : +if (!s->caps_64bit_addr) { +qemu_log_mask (LOG_GUEST_ERROR , +"ehci: write to CTRLDSSEGMENT while " +" 64-bit addressing capability is disabled\n" ); +return ; + } +break ; +case ASYNCLISTADDR :if (ehci_async_enabled (s)) { qemu_log_mask(LOG_GUEST_ERROR,
@@ -2554,6 +2563,9 @@ void usb_ehci_realize(EHCIState *s, DeviceState *dev, Error **errp) s->maxframes);return ; } +if (s->caps_64bit_addr) { + s->caps[0x08 ] |=BIT (0 ); + }memory_region_add_subregion (&s->mem, s->capsbase, &s->mem_caps);memory_region_add_subregion (&s->mem, s->opregbase, &s->mem_opreg);
@@ -2613,7 +2625,7 @@ void usb_ehci_init(EHCIState *s, DeviceState *dev) s->caps[0x05 ] =0x00 ;/* No companion ports at present */ s->caps[0x06 ] =0x00 ; s->caps[0x07 ] =0x00 ; - s->caps[0x08 ] =0x80 ;/* We can cache whole frame, no 64-bit */ + s->caps[0x08 ] =0x80 ;/* We can cache whole frame */ s->caps[0x0a ] =0x00 ; s->caps[0x0b ] =0x00 ;
Signature · 1 line
2.43.0
PATCH v4 10/17 hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing
In reply to Jamin LinEHCI supports 64-bit control data structure addressing when the 64-bit Addressing Capability bit in HCCPARAMS is set. In that mode, the CTRLDSSEGMENT register supplies the upper 32 bits which are concatenated with 32-bit link pointer fields to form full 64-bit descriptor addresses (EHCI 1.0, section 2.3.5 and Appendix B).
The current implementation assumes 32-bit QH descriptor addresses and directly uses link pointer values without applying the CTRLDSSEGMENT upper dword.
Introduce a helper, ehci_get_desc_addr(), to construct full 64-bit descriptor addresses when 64-bit capability is enabled. Update QH traversal paths (async list walk, horizontal QH link, and periodic schedule entry handling) to use the translated 64-bit addresses.
EHCI 64-bit buffer pointer fields are defined in Appendix B as split 32-bit low/high parts located at separate offsets, rather than a single contiguous 64-bit field. Therefore, the buffer pointers cannot be represented as uint64_t bufptr[5] without violating the descriptor layout defined by the specification.
Introduce ehci_get_buf_addr() to construct full 64-bit buffer addresses from bufptr[] and bufptr_hi[] fields. Use this helper when calculating transfer buffer addresses so that data buffers above 4GB are correctly handled.
Also add bufptr_hi[5] to EHCIqh to support 64-bit buffer pointer fields as defined in Appendix B.
When 64-bit capability is disabled, descriptor addresses remain 32-bit and existing behaviour is unchanged.
Note: Similar split 64-bit buffer pointer handling is required for qTD, iTD and siTD descriptors, which will be addressed in follow-up changes.
--- hw/usb/hcd-ehci.h | 4 ++++ hw/usb/hcd-ehci.c | 47 ++++++++++++++++++++++++++++++++++----------- hw/usb/trace-events | 2 +- 3 files changed, 41 insertions(+), 12 deletions(-)
hw/usb/hcd-ehci.h +4 -0
@@ -141,6 +141,9 @@ typedef struct EHCIqtd {#define QTD_BUFPTR_SH 12 } EHCIqtd; +/* QH overlay: altnext_qtd, token, bufptr[5], bufptr_hi[5] */ +#define EHCI_QH_OVERLAY_COUNT 12 +/* * EHCI spec version 1.0 Section 3.6 */
@@ -194,6 +197,7 @@ typedef struct EHCIqh {#define BUFPTR_FRAMETAG_MASK 0x0000001f#define BUFPTR_SBYTES_MASK 0x00000fe0#define BUFPTR_SBYTES_SH 5 +uint32_t bufptr_hi[5 ]; } EHCIqh;enum async_state {
hw/usb/hcd-ehci.c +36 -11
99 lines not on this page · raw message
hw/usb/trace-events +1 -1
@@ -113,7 +113,7 @@ usb_ehci_dma_error(void) "" usb_ehci_execute_complete(uint64_t qhaddr, uint32_t next, uint64_t qtdaddr, int status, int actual_length) "qhaddr=0x%" PRIx64 ", next=0x%x, qtdaddr=0x%" PRIx64 ", status=%d, actual_length=%d" usb_ehci_fetchqh_reclaim_done(uint64_t qhaddr) "QH 0x%" PRIx64 " H-bit set, reclamation status reset - done processing" usb_ehci_fetchqh_dbg(uint64_t qhaddr, uint32_t h, uint32_t halt, uint32_t active, uint32_t next) "QH 0x%" PRIx64 " (h 0x%x halt 0x%x active 0x%x) next 0x%08x" -usb_ehci_periodic_state_advance(uint32_t frame, uint32_t list, uint32_t entry) "frame=%d, list=0x%x, entry=0x%x" +usb_ehci_periodic_state_advance(uint32_t frame, uint64_t list, uint64_t entry) "frame=%d, list=0x%" PRIx64 ", entry=0x%" PRIx64 usb_ehci_skipped_uframes(uint64_t skipped_uframes) "skipped %" PRIu64 " uframes" usb_ehci_log(const char *msg) "%s"
Signature · 1 line
2.43.0
PATCH v4 11/17 hw/usb/hcd-ehci: Implement 64-bit qTD descriptor addressing
In reply to Jamin LinEHCI supports 64-bit addressing when the 64-bit Addressing Capability bit in HCCPARAMS is set. In that mode, the CTRLDSSEGMENT register provides the upper 32 bits that are concatenated with 32-bit link pointer values to form 64-bit control data structure addresses (EHCI 1.0, section 2.3.5 and Appendix B).
qTD link pointers (current_qtd/next_qtd/altnext_qtd and qTD.next) are stored as 32-bit values in the data structures and must be expanded to full 64-bit descriptor addresses when 64-bit mode is enabled. Update the qTD traversal paths to use ehci_get_desc_addr() when following link pointers.
Appendix B also defines high dword fields for qTD buffer pointers. Add bufptr_hi[5] to EHCIqtd and extend qTD fetch and QH overlay handling to load and propagate the high buffer pointer fields.
When 64-bit capability is disabled, descriptor and buffer addresses remain 32-bit and existing behaviour is unchanged.
--- hw/usb/hcd-ehci.h | 1 + hw/usb/hcd-ehci.c | 19 ++++++++++++------- 2 files changed, 13 insertions(+), 7 deletions(-)
hw/usb/hcd-ehci.h +1 -0
@@ -139,6 +139,7 @@ typedef struct EHCIqtd {uint32_t bufptr[5 ];/* Standard buffer pointer */ #define QTD_BUFPTR_MASK 0xfffff000#define QTD_BUFPTR_SH 12 +uint32_t bufptr_hi[5 ]; } EHCIqtd;/* QH overlay: altnext_qtd, token, bufptr[5], bufptr_hi[5] */
hw/usb/hcd-ehci.c +12 -7
@@ -472,7 +472,8 @@ static bool ehci_verify_qtd(EHCIPacket *p, EHCIqtd *qtd) (p->qtd.next != qtd->next)) || (!NLPTR_TBIT (p->qtd.altnext) && (p->qtd.altnext != qtd->altnext)) || p->qtd.token != qtd->token || - p->qtd.bufptr[0] != qtd->bufptr[0]) { + p->qtd.bufptr[0 ] != qtd->bufptr[0 ] || + p->qtd.bufptr_hi[0] != qtd->bufptr_hi[0]) { return false; } else {return true;
@@ -1200,6 +1201,7 @@ static int ehci_qh_do_overlay(EHCIQueue *q)for (i =0 ; i <5 ; i++) { q->qh.bufptr[i] = p->qtd.bufptr[i]; + q->qh.bufptr_hi[i] = p->qtd.bufptr_hi[i]; }if (!(q->qh.epchar &QH_EPCHAR_DTC )) {
@@ -1233,7 +1235,8 @@ static int ehci_init_transfer(EHCIPacket *p)return -1 ; } - page = p->qtd.bufptr[cpage] &QTD_BUFPTR_MASK ; + page =ehci_get_buf_addr (p->queue->ehci, p->qtd.bufptr_hi[cpage], + p->qtd.bufptr[cpage],QTD_BUFPTR_MASK ); page += offset; plen = bytes;if (plen >4096 - offset) {
@@ -1727,7 +1730,7 @@ static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async) }else if ((q->qh.token &QTD_TOKEN_ACTIVE ) && (NLPTR_TBIT (q->qh.current_qtd) ==0 ) && (q->qh.current_qtd !=0 )) { - q->qtdaddr = q->qh.current_qtd; + q->qtdaddr =ehci_get_desc_addr (ehci, q->qh.current_qtd);ehci_set_state (ehci, async,EST_FETCHQTD ); }else {
@@ -1805,14 +1808,14 @@ static int ehci_state_advqueue(EHCIQueue *q)*/ if (((q->qh.token &QTD_TOKEN_TBYTES_MASK ) !=0 ) && (NLPTR_TBIT (q->qh.altnext_qtd) ==0 )) { - q->qtdaddr = q->qh.altnext_qtd; + q->qtdaddr =ehci_get_desc_addr (q->ehci, q->qh.altnext_qtd);ehci_set_state (q->ehci, q->async,EST_FETCHQTD );/* * next qTD is valid */ }else if (NLPTR_TBIT (q->qh.next_qtd) ==0 ) { - q->qtdaddr = q->qh.next_qtd; + q->qtdaddr =ehci_get_desc_addr (q->ehci, q->qh.next_qtd);ehci_set_state (q->ehci, q->async,EST_FETCHQTD );/*
@@ -1841,7 +1844,9 @@ static int ehci_state_fetchqtd(EHCIQueue *q)if (get_dwords (q->ehci, addr +0 , &qtd.next,1 ) <0 ||get_dwords (q->ehci, addr +4 , &qtd.altnext,1 ) <0 ||get_dwords (q->ehci, addr +12 , qtd.bufptr, -ARRAY_SIZE (qtd.bufptr)) <0 ) { +ARRAY_SIZE (qtd.bufptr)) <0 || +get_dwords (q->ehci, addr +32 , qtd.bufptr_hi, +ARRAY_SIZE (qtd.bufptr_hi)) <0 ) {return 0 ; }ehci_trace_qtd (q,NLPTR_GET (q->qtdaddr), &qtd);
@@ -1922,7 +1927,7 @@ static int ehci_fill_queue(EHCIPacket *p)if (NLPTR_TBIT (qtd.next) !=0 ) {break ; } - qtdaddr = qtd.next; + qtdaddr =ehci_get_desc_addr (q->ehci, qtd.next);/* * Detect circular td lists, Windows creates these, counting on the * active bit going low after execution to make the queue stop.
Signature · 1 line
2.43.0
PATCH v4 12/17 hw/usb/hcd-ehci: Implement 64-bit iTD descriptor addressing
In reply to Jamin LinEHCI supports 64-bit control data structure addressing when the 64-bit Addressing Capability bit in HCCPARAMS is set. In that mode, the CTRLDSSEGMENT register provides the upper 32 bits that are concatenated with 32-bit link pointer values to form full 64-bit descriptor addresses (EHCI 1.0, section 2.3.5 and Appendix B).
iTD link pointers are stored as 32-bit values and must be expanded to full 64-bit descriptor addresses when 64-bit mode is enabled. Update the iTD traversal path to use ehci_get_desc_addr() when following link pointers.
Appendix B also defines high dword fields for iTD buffer pointers. Add bufptr_hi[7] to EHCIitd and use ehci_get_buf_addr() to construct full 64-bit buffer addresses from bufptr[] and bufptr_hi[] fields when processing isochronous transfers. This allows buffers above 4GB to be handled correctly.
When 64-bit capability is disabled, descriptor and buffer addresses remain 32-bit and existing behaviour is unchanged.
--- hw/usb/hcd-ehci.h | 1 + hw/usb/hcd-ehci.c | 9 ++++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
hw/usb/hcd-ehci.h +1 -0
@@ -63,6 +63,7 @@ typedef struct EHCIitd {#define ITD_BUFPTR_MAXPKT_SH 0#define ITD_BUFPTR_MULT_MASK 0x00000003#define ITD_BUFPTR_MULT_SH 0 +uint32_t bufptr_hi[7 ]; } EHCIitd;/*
hw/usb/hcd-ehci.c +6 -3
@@ -1464,7 +1464,8 @@ static int ehci_process_itd(EHCIState *ehci,return -1 ; } - ptr1 = (itd->bufptr[pg] &ITD_BUFPTR_MASK ); + ptr1 =ehci_get_buf_addr (ehci, itd->bufptr_hi[pg], + itd->bufptr[pg],ITD_BUFPTR_MASK );qemu_sglist_init (&ehci->isgl, ehci->device,2 , ehci->as);if (off + len >4096 ) {/* transfer crosses page border */
@@ -1472,7 +1473,9 @@ static int ehci_process_itd(EHCIState *ehci,qemu_sglist_destroy (&ehci->isgl);return -1 ;/* avoid page pg + 1 */ } - ptr2 = (itd->bufptr[pg +1 ] &ITD_BUFPTR_MASK ); + ptr2 =ehci_get_buf_addr (ehci, itd->bufptr_hi[pg +1 ], + itd->bufptr[pg +1 ], +ITD_BUFPTR_MASK );uint32_t len2 = off + len -4096 ;uint32_t len1 = len - len2;qemu_sglist_add (&ehci->isgl, ptr1 + off, len1);
@@ -1762,7 +1765,7 @@ static int ehci_state_fetchitd(EHCIState *ehci, int async)put_dwords (ehci,NLPTR_GET (entry), (uint32_t *) &itd,sizeof (EHCIitd) >>2 ); -ehci_set_fetch_addr (ehci, async, itd.next); +ehci_set_fetch_addr (ehci, async,ehci_get_desc_addr (ehci, itd.next));ehci_set_state (ehci, async,EST_FETCHENTRY );return 1 ;
Signature · 1 line
2.43.0
PATCH v4 13/17 hw/usb/hcd-ehci: Implement 64-bit siTD descriptor addressing
In reply to Jamin LinEHCI supports 64-bit control data structure addressing when the 64-bit Addressing Capability bit in HCCPARAMS is set. In that mode, the CTRLDSSEGMENT register provides the upper 32 bits that are concatenated with 32-bit link pointer values to form full 64-bit descriptor addresses (EHCI 1.0, section 2.3.5 and Appendix B).
siTD link pointers are stored as 32-bit values and must be expanded to full 64-bit descriptor addresses when 64-bit mode is enabled. Update the siTD traversal path to use ehci_get_desc_addr() when following link pointers.
When 64-bit capability is disabled, descriptor addresses remain 32-bit and existing behaviour is unchanged.
--- hw/usb/hcd-ehci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/usb/hcd-ehci.c +1 -1
@@ -1792,7 +1792,7 @@ static int ehci_state_fetchsitd(EHCIState *ehci, int async)warn_report ("Skipping active siTD" ); } -ehci_set_fetch_addr (ehci, async, sitd.next); +ehci_set_fetch_addr (ehci, async,ehci_get_desc_addr (ehci, sitd.next));ehci_set_state (ehci, async,EST_FETCHENTRY );return 1 ; }
Signature · 1 line
2.43.0
PATCH v4 14/17 hw/usb/hcd-ehci: Add ctrldssegment-default property
In reply to Jamin LinWhen 64-bit addressing is supported, the Linux EHCI driver programs the segment register to zero. See ehci_run function:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-hcd.c
The driver comment also notes that descriptor structures allocated from the DMA pool use segment zero semantics.
Descriptor memory is allocated using the DMA API. The platform driver configures a 64-bit DMA mask so memory can be allocated above 4GB. See ehci_platform_probe function:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-platform.c
On AST2700 platforms, system DRAM is mapped above 4GB at 0x400000000. As a result, descriptor addresses constructed directly from the guest EHCI registers do not match the actual system address used by the controller when fetching queue heads (QH) and queue element transfer descriptors (qTD).
Add a ctrldssegment-default property so platforms can provide a descriptor address offset when constructing descriptor addresses. This allows systems where DRAM resides above 4GB to access EHCI descriptors correctly.
The default value is zero, so existing machines are not affected.
--- hw/usb/hcd-ehci.h | 5 ++++- hw/usb/hcd-ehci.c | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)
hw/usb/hcd-ehci.h +4 -1
@@ -264,6 +264,7 @@ struct EHCIState {uint32_t maxframes;bool migrate_fetch_addr_64bit;bool caps_64bit_addr; +uint32_t ctrldssegment_default;/* * EHCI spec version 1.0 Section 2.3
@@ -322,7 +323,9 @@ struct EHCIState {DEFINE_PROP_BOOL ("x-migrate-fetch-addr-64bit" , _state, \ ehci.migrate_fetch_addr_64bit, true), \DEFINE_PROP_BOOL ("caps-64bit-addr" , _state, \ - ehci.caps_64bit_addr, false) + ehci.caps_64bit_addr, false), \ +DEFINE_PROP_UINT32 ("ctrldssegment-default" , _state, \ + ehci.ctrldssegment_default, 0)extern const VMStateDescription vmstate_ehci;
hw/usb/hcd-ehci.c +1 -0
@@ -1134,6 +1134,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr, " 64-bit addressing capability is disabled\n");return ; } + val |= s->ctrldssegment_default;break ;case ASYNCLISTADDR :
Signature · 1 line
2.43.0
Re: [PATCH v4 14/17] hw/usb/hcd-ehci: Add ctrldssegment-default property
Quoted 59 lines · Jamin Lin
When 64-bit addressing is supported, the Linux EHCI driver programs the segment register to zero. See
ehci_runfunction:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-hcd.cThe driver comment also notes that descriptor structures allocated from the DMA pool use segment zero semantics.
Descriptor memory is allocated using the DMA API. The platform driver configures a 64-bit DMA mask so memory can be allocated above 4GB. See
ehci_platform_probefunction:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-platform.cOn AST2700 platforms, system DRAM is mapped above 4GB at
0x400000000. As a result, descriptor addresses constructed directly from the guest EHCI registers do not match the actual system address used by the controller when fetching queue heads (QH) and queue element transfer descriptors (qTD).Add a ctrldssegment-default property so platforms can provide a descriptor address offset when constructing descriptor addresses. This allows systems where DRAM resides above 4GB to access EHCI descriptors correctly.
The default value is zero, so existing machines are not affected.
Signed-off-by Jamin Lin <[email protected]>--- hw/usb/hcd-ehci.h | 5 ++++- hw/usb/hcd-ehci.c | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)hw/usb/hcd-ehci.h +4
-1@@ -264,6 +264,7 @@ struct EHCIState {uint32_t maxframes;bool migrate_fetch_addr_64bit;bool caps_64bit_addr; +uint32_t ctrldssegment_default;/* * EHCI spec version 1.0 Section 2.3 @@ -322,7 +323,9 @@ struct EHCIState {DEFINE_PROP_BOOL ("x-migrate-fetch-addr-64bit" , _state, \ ehci.migrate_fetch_addr_64bit, true), \DEFINE_PROP_BOOL ("caps-64bit-addr" , _state, \ - ehci.caps_64bit_addr, false) + ehci.caps_64bit_addr, false), \ +DEFINE_PROP_UINT32 ("ctrldssegment-default" , _state, \ + ehci.ctrldssegment_default, 0)extern const VMStateDescription vmstate_ehci;hw/usb/hcd-ehci.c +0
-0
hw/usb/hcd-ehci.c static void ehci_opreg_write(void *ptr, hwaddr addr, · line 1140
Quoted 7 lines
hw/usb/hcd-ehci.c +1
-0@@ -1134,6 +1134,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr, " 64-bit addressing capability is disabled\n");return ; } + val |= s->ctrldssegment_default;break ;case ASYNCLISTADDR :
Thanks,
C.
PATCH v4 15/17 hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default
In reply to Jamin LinOn AST2700 platforms, system DRAM is mapped above 4GB with a base address at 0x400000000.
The Linux EHCI driver programs the segment register to zero when 64-bit addressing is supported. As a result, descriptor addresses derived from the EHCI registers do not include the DRAM base address.
Descriptor memory is allocated through the DMA API with a 64-bit DMA mask, allowing descriptors to reside in DRAM above 4GB. On AST2700, EHCI queue heads (QH) and queue element transfer descriptors (qTD) are therefore placed at addresses starting from 0x400000000.
Set the ctrldssegment-default property to 0x4 so the upper 32 bits of descriptor addresses are adjusted accordingly. This allows the emulated EHCI controller to construct correct system addresses when accessing descriptors in DRAM above 4GB.
--- hw/arm/aspeed_ast27x0.c | 2 ++ 1 file changed, 2 insertions(+)
hw/arm/aspeed_ast27x0.c +2 -0
@@ -856,6 +856,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)/* EHCI */ for (i =0 ; i < sc->ehcis_num; i++) { +object_property_set_int (OBJECT (&s->ehci[i]),"ctrldssegment-default" , +0x4 , &error_abort);if (!sysbus_realize (SYS_BUS_DEVICE (&s->ehci[i]), errp)) {return ; }
Signature · 1 line
2.43.0
Re: [PATCH v4 15/17] hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default
Quoted 29 lines · Jamin Lin
On AST2700 platforms, system DRAM is mapped above 4GB with a base address at
0x400000000.The Linux EHCI driver programs the segment register to zero when 64-bit addressing is supported. As a result, descriptor addresses derived from the EHCI registers do not include the DRAM base address.
Descriptor memory is allocated through the DMA API with a 64-bit DMA mask, allowing descriptors to reside in DRAM above 4GB. On AST2700, EHCI queue heads (QH) and queue element transfer descriptors (qTD) are therefore placed at addresses starting from
0x400000000.Set the ctrldssegment-default property to
0x4so the upper 32 bits of descriptor addresses are adjusted accordingly. This allows the emulated EHCI controller to construct correct system addresses when accessing descriptors in DRAM above 4GB.Signed-off-by Jamin Lin <[email protected]>--- hw/arm/aspeed_ast27x0.c | 2 ++ 1 file changed, 2 insertions(+)hw/arm/aspeed_ast27x0.c +0
-0
hw/arm/aspeed_ast27x0.c static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp) · line 863
Quoted 8 lines
hw/arm/aspeed_ast27x0.c +2
-0@@ -856,6 +856,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)/* EHCI */ for (i =0 ; i < sc->ehcis_num; i++) { +object_property_set_int (OBJECT (&s->ehci[i]),"ctrldssegment-default" , +0x4 , &error_abort);if (!sysbus_realize (SYS_BUS_DEVICE (&s->ehci[i]), errp)) {return ; }
Thanks,
C.
PATCH v4 16/17 hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing
In reply to Jamin LinAST2700 supports a 64-bit DRAM address space. Therefore, DMA transactions must be capable of accessing 64-bit addresses.
Enable the "caps-64bit-addr" property for the EHCI controllers on AST2700 so that USB DMA operations can correctly handle 64-bit memory addresses.
--- hw/arm/aspeed_ast27x0.c | 2 ++ 1 file changed, 2 insertions(+)
hw/arm/aspeed_ast27x0.c +2 -0
@@ -858,6 +858,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)for (i =0 ; i < sc->ehcis_num; i++) {object_property_set_int (OBJECT (&s->ehci[i]),"ctrldssegment-default" ,0x4 , &error_abort); +object_property_set_bool (OBJECT (&s->ehci[i]),"caps-64bit-addr" , true, + &error_abort);if (!sysbus_realize (SYS_BUS_DEVICE (&s->ehci[i]), errp)) {return ; }
Signature · 1 line
2.43.0
PATCH v4 17/17 tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2
In reply to Jamin LinAdd a functional test to verify USB EHCI support on the AST2700 A2/A1 by attaching a USB keyboard device and checking its enumeration via lsusb.
This introduces a helper routine that runs lsusb in the guest and validates that the emulated "QEMU USB Keyboard" is detected.
--- tests/functional/aarch64/test_aspeed_ast2700a1.py | 7 +++++++ tests/functional/aarch64/test_aspeed_ast2700a2.py | 7 +++++++ 2 files changed, 14 insertions(+)
tests/functional/aarch64/test_aspeed_ast2700a1.py +7 -0
@@ -118,6 +118,11 @@ def do_ast2700_pcie_test(self): 'ip addr show dev eth2', 'inet 10.0.2.15/24') + def do_ast2700_usb_ehci_test(self): + exec_command_and_wait_for_pattern(self, + 'lsusb', + 'QEMU QEMU USB Keyboard') + def start_ast2700_test(self, name, bus_id): num_cpu = 4 load_images_list = [
@@ -161,10 +166,12 @@ def test_aarch64_ast2700a1_evb_sdk_v11_01(self): self.archive_extract(self.ASSET_SDK_V1101_AST2700A1) self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2') self.vm.add_args('-netdev', 'user,id=net1') + self.vm.add_args('-device', 'usb-kbd,bus=usb-bus.3') self.start_ast2700_test('ast2700-a1-image', 1) self.verify_openbmc_boot_and_login('ast2700-a1') self.do_ast2700_i2c_test(1) self.do_ast2700_pcie_test() + self.do_ast2700_usb_ehci_test() def test_aarch64_ast2700a1_evb_sdk_vbootrom_v11_01(self): self.set_machine('ast2700a1-evb')
tests/functional/aarch64/test_aspeed_ast2700a2.py +7 -0
@@ -121,6 +121,11 @@ def do_ast2700_pcie_test(self): 'ip addr show dev eth2', 'inet 10.0.2.15/24') + def do_ast2700_usb_ehci_test(self): + exec_command_and_wait_for_pattern(self, + 'lsusb', + 'QEMU QEMU USB Keyboard') + def start_ast2700_test(self, name, bus_id): num_cpu = 4 load_images_list = [
@@ -164,10 +169,12 @@ def test_aarch64_ast2700a2_evb_sdk_v11_01(self): self.archive_extract(self.ASSET_SDK_V1101_AST2700A2) self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2') self.vm.add_args('-netdev', 'user,id=net1') + self.vm.add_args('-device', 'usb-kbd,bus=usb-bus.3') self.start_ast2700_test('ast2700-default-image', 1) self.verify_openbmc_boot_and_login('ast2700-default') self.do_ast2700_i2c_test(1) self.do_ast2700_pcie_test() + self.do_ast2700_usb_ehci_test() def test_aarch64_ast2700a2_evb_sdk_vbootrom_v11_01(self): self.set_machine('ast2700a2-evb')
Signature · 1 line
2.43.0
Re: [PATCH v4 17/17] tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2
Quoted 62 lines · Jamin Lin
Add a functional test to verify USB EHCI support on the AST2700 A2/A1 by attaching a USB keyboard device and checking its enumeration via lsusb.
This introduces a helper routine that runs lsusb in the guest and validates that the emulated "QEMU USB Keyboard" is detected.
Signed-off-by Jamin Lin <[email protected]>Reviewed-by Philippe Mathieu-Daudé <[email protected]>--- tests/functional/aarch64/test_aspeed_ast2700a1.py | 7 +++++++ tests/functional/aarch64/test_aspeed_ast2700a2.py | 7 +++++++ 2 files changed, 14 insertions(+)tests/functional/aarch64/test_aspeed_ast2700a1.py +7
-0@@ -118,6 +118,11 @@ def do_ast2700_pcie_test(self): 'ip addr show dev eth2', 'inet 10.0.2.15/24') + def do_ast2700_usb_ehci_test(self): + exec_command_and_wait_for_pattern(self, + 'lsusb', + 'QEMU QEMU USB Keyboard') + def start_ast2700_test(self, name, bus_id): num_cpu = 4 load_images_list = [@@ -161,10 +166,12 @@ def test_aarch64_ast2700a1_evb_sdk_v11_01(self): self.archive_extract(self.ASSET_SDK_V1101_AST2700A1) self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2') self.vm.add_args('-netdev', 'user,id=net1') + self.vm.add_args('-device', 'usb-kbd,bus=usb-bus.3') self.start_ast2700_test('ast2700-a1-image', 1) self.verify_openbmc_boot_and_login('ast2700-a1') self.do_ast2700_i2c_test(1) self.do_ast2700_pcie_test() + self.do_ast2700_usb_ehci_test() def test_aarch64_ast2700a1_evb_sdk_vbootrom_v11_01(self): self.set_machine('ast2700a1-evb')tests/functional/aarch64/test_aspeed_ast2700a2.py +5
-0@@ -121,6 +121,11 @@ def do_ast2700_pcie_test(self): 'ip addr show dev eth2', 'inet 10.0.2.15/24') + def do_ast2700_usb_ehci_test(self): + exec_command_and_wait_for_pattern(self, + 'lsusb', + 'QEMU QEMU USB Keyboard') + def start_ast2700_test(self, name, bus_id): num_cpu = 4 load_images_list = [@@ -164,10 +169,12 @@ def test_aarch64_ast2700a2_evb_sdk_v11_01(self): self.archive_extract(self.ASSET_SDK_V1101_AST2700A2) self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2')
tests/functional/aarch64/test_aspeed_ast2700a2.py def test_aarch64_ast2700a2_evb_sdk_v11_01(self): · line 180
Quoted 10 lines
tests/functional/aarch64/test_aspeed_ast2700a2.py +2
-0self.vm.add_args('-netdev', 'user,id=net1') + self.vm.add_args('-device', 'usb-kbd,bus=usb-bus.3') self.start_ast2700_test('ast2700-default-image', 1) self.verify_openbmc_boot_and_login('ast2700-default') self.do_ast2700_i2c_test(1) self.do_ast2700_pcie_test() + self.do_ast2700_usb_ehci_test() def test_aarch64_ast2700a2_evb_sdk_vbootrom_v11_01(self): self.set_machine('ast2700a2-evb')
Thanks,
C.