Skip to contentSkip to conversation

md/raid1: small cleanups in MD and raid1 drivers

PATCH Applied Abd-Alrhman Masalkhi 2 participants 5 messages Apr 23 – Apr 28 MD RAID

lore
Share & tools
lore
#0 lore raw

cover md/raid1: small cleanups in MD and raid1 drivers

Hi,

This small series contains three cleanups in the MD and raid1 drivers.

Thanks,
Abd-Alrhman

Abd-Alrhman Masalkhi (3):
md/raid1: replace wait loop with wait_event_idle() in
raid1_write_request()
md: use mddev_is_dm() instead of open-coding gendisk checks
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes

 drivers/md/md.c    | 16 ++++------------
 drivers/md/raid1.c | 15 ++++-----------
 2 files changed, 8 insertions(+), 23 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/3 md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()

The wait loop is equivalent to wait_event_idle() and can be simplified by usaing it for improving readability.

---
 drivers/md/raid1.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)
drivers/md/raid1.c +4 -11
index cc9914bd15c1..b549be9174bb 100644
@@ -1488,21 +1488,14 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
 	    mddev->cluster_ops->area_resyncing(mddev, WRITE,
 		     bio->bi_iter.bi_sector, bio_end_sector(bio))) {
 
-		DEFINE_WAIT(w);
 		if (bio->bi_opf & REQ_NOWAIT) {
 			bio_wouldblock_error(bio);
 			return;
 		}
-		for (;;) {
-			prepare_to_wait(&conf->wait_barrier,
-					&w, TASK_IDLE);
-			if (!mddev->cluster_ops->area_resyncing(mddev, WRITE,
-							bio->bi_iter.bi_sector,
-							bio_end_sector(bio)))
-				break;
-			schedule();
-		}
-		finish_wait(&conf->wait_barrier, &w);
+		wait_event_idle(conf->wait_barrier,
+				!mddev->cluster_ops->area_resyncing(mddev, WRITE,
+								    bio->bi_iter.bi_sector,
+								    bio_end_sector(bio)));
 	}
 
 	/*
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/3 md: use mddev_is_dm() instead of open-coding gendisk checks

In reply to Abd-Alrhman Masalkhi

Replace direct checks on mddev->gendisk with mddev_is_dm() in md_handle_request() and md_run().

---
 drivers/md/md.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/md/md.c +2 -2
index ac71640ff3a8..346d071c1b8e 100644
@@ -417,7 +417,7 @@ bool md_handle_request(struct mddev *mddev, struct bio *bio)
 
 	if (!mddev->pers->make_request(mddev, bio)) {
 		percpu_ref_put(&mddev->active_io);
-		if (!mddev->gendisk && mddev->pers->prepare_suspend)
+		if (mddev_is_dm(mddev) && mddev->pers->prepare_suspend)
 			return false;
 		goto check_suspended;
 	}
@@ -6584,7 +6584,7 @@ int md_run(struct mddev *mddev)
 	}
 
 	/* dm-raid expect sync_thread to be frozen until resume */
-	if (mddev->gendisk)
+	if (!mddev_is_dm(mddev))
 		mddev->recovery = 0;
 
 	/* may be over-ridden by personality */
Signature · 1 line
2.43.0
#3 lore raw

PATCH 3/3 md: use ATTRIBUTE_GROUPS() for md default sysfs attributes

In reply to Abd-Alrhman Masalkhi

Replace the md_default_group and md_attr_groups with ATTRIBUTE_GROUPS().

---
 drivers/md/md.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
drivers/md/md.c +2 -10
index 346d071c1b8e..0e55639211f2 100644
@@ -6045,10 +6045,7 @@ static struct attribute *md_default_attrs[] = {
 	&md_logical_block_size.attr,
 	NULL,
 };
-
-static const struct attribute_group md_default_group = {
-	.attrs = md_default_attrs,
-};
+ATTRIBUTE_GROUPS(md_default);
 
 static struct attribute *md_redundancy_attrs[] = {
 	&md_scan_mode.attr,
@@ -6073,11 +6070,6 @@ static const struct attribute_group md_redundancy_group = {
 	.attrs = md_redundancy_attrs,
 };
 
-static const struct attribute_group *md_attr_groups[] = {
-	&md_default_group,
-	NULL,
-};
-
 static ssize_t
 md_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 {
@@ -6154,7 +6146,7 @@ static const struct sysfs_ops md_sysfs_ops = {
 static const struct kobj_type md_ktype = {
 	.release	= md_kobj_release,
 	.sysfs_ops	= &md_sysfs_ops,
-	.default_groups	= md_attr_groups,
+	.default_groups	= md_default_groups,
 };
 
 int mdp_major = 0;
Signature · 1 line
2.43.0
Applied
#4 lore raw
In reply to Abd-Alrhman Masalkhi
Quoted 13 lines · Abd-Alrhman Masalkhi

Hi,

This small series contains three cleanups in the MD and raid1 drivers.

Thanks,
Abd-Alrhman

Abd-Alrhman Masalkhi (3):
md/raid1: replace wait loop with wait_event_idle() in
raid1_write_request()
md: use mddev_is_dm() instead of open-coding gendisk checks
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes

Quoted 3 lines
  drivers/md/md.c    | 16 ++++------------
  drivers/md/raid1.c | 15 ++++-----------
  2 files changed, 8 insertions(+), 23 deletions(-)

Applied to md-7.1

Quoted 1 line
Signature · 2 lines
Thansk,
Kuai