board: rockchip: add Anbernic RG-DS
Subsystems (3)
PATCH 1/1 board: rockchip: add Anbernic RG-DS
From: Chris Morgan <[email protected]>
Add support for the Anbernic RG-DS dual-screen handheld gaming device.
--- .../arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi | 41 ++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 7 ++ board/anbernic/rg-ds/Kconfig | 12 +++ board/anbernic/rg-ds/MAINTAINERS | 7 ++ configs/anbernic-rg-ds-rk3568_defconfig | 76 +++++++++++++++++++ include/configs/anbernic-rg-ds-rk3568.h | 12 +++ 6 files changed, 155 insertions(+) create mode 100644 arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi create mode 100644 board/anbernic/rg-ds/Kconfig create mode 100644 board/anbernic/rg-ds/MAINTAINERS create mode 100644 configs/anbernic-rg-ds-rk3568_defconfig create mode 100644 include/configs/anbernic-rg-ds-rk3568.h
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +41 -0
@@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk356x-u-boot.dtsi" + +&gpio0 { + bootph-pre-ram; +}; + +&i2c0 { + bootph-pre-ram; +}; + +&i2c0_xfer { + bootph-pre-ram; +}; + +&i2s1m0_mclk { + bootph-pre-ram; +}; + +&pmic_int_l { + bootph-pre-ram; +}; + +&rk817 { + regulators { + bootph-pre-ram; + }; +}; + +&sdhci { + cap-mmc-highspeed; +}; + +&sdmmc_pwren_l { + bootph-pre-ram; +}; + +&vcc3v3_sd { + bootph-pre-ram; +};
arch/arm/mach-rockchip/rk3568/Kconfig +7 -0
@@ -8,6 +8,12 @@ config TARGET_EVB_RK3568 help RK3568 EVB is a evaluation board for Rockchp RK3568. +config TARGET_ANBERNIC_RG_DS_RK3568 + bool "Anbernic RG DS" + help + Anbernic RG DS gaming device with Rockchip RK3568 and dual + displays. + config TARGET_ANBERNIC_RGXX3_RK3566 bool "Anbernic RGXX3" help
@@ -71,6 +77,7 @@ config SYS_SOC default "rk3568" source "board/rockchip/evb_rk3568/Kconfig" +source "board/anbernic/rg-ds/Kconfig" source "board/anbernic/rgxx3_rk3566/Kconfig" source "board/hardkernel/odroid_m1/Kconfig" source "board/hardkernel/odroid_m1s/Kconfig"
board/anbernic/rg-ds/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_RG_DS_RK3568 + +config SYS_BOARD + default "rg-ds-rk3568" + +config SYS_VENDOR + default "anbernic" + +config SYS_CONFIG_NAME + default "rg-ds-rk3568" + +endif
board/anbernic/rg-ds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +ANBERNIC-RG-DS-RK3568 +M: Chris Morgan <[email protected]> +S: Maintained +F: arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi +F: board/anbernic/rg-ds +F: configs/anbernic-rg-ds_defconfig +F: include/configs/anbernic-rg-ds.h
configs/anbernic-rg-ds-rk3568_defconfig new file +76 -0
76 lines not on this page · raw message
include/configs/anbernic-rg-ds-rk3568.h new file +12 -0
@@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __ANBERNIC_RG_DS_RK3568_H +#define __ANBERNIC_RG_DS_RK3568_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3568_common.h> + +#endif
Signature · 1 line
2.43.0
Hi Chris,
Quoted 14 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add support for the Anbernic RG-DS dual-screen handheld gaming device.
Signed-off-by Chris Morgan <[email protected]>--- .../arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi | 41 ++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 7 ++ board/anbernic/rg-ds/Kconfig | 12 +++ board/anbernic/rg-ds/MAINTAINERS | 7 ++ configs/anbernic-rg-ds-rk3568_defconfig | 76 +++++++++++++++++++ include/configs/anbernic-rg-ds-rk3568.h | 12 +++ 6 files changed, 155 insertions(+)
Quoted 6 lines
create mode 100644
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsicreate mode 100644 board/anbernic/rg-ds/Kconfig
create mode 100644 board/anbernic/rg-ds/MAINTAINERS create mode 100644 configs/anbernic-rg-ds-rk3568_defconfig create mode 100644include/configs/anbernic-rg-ds-rk3568.h
Please add an entry to doc/board/rockchip/rockchip.rst.
Quoted 29 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +23
-0@@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk356x-u-boot.dtsi" + +&gpio0 { + bootph-pre-ram; +}; + +&i2c0 { + bootph-pre-ram; +}; + +&i2c0_xfer { + bootph-pre-ram; +}; + +&i2s1m0_mclk { + bootph-pre-ram; +}; + +&pmic_int_l { + bootph-pre-ram; +};
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi line 33
Quoted 10 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +10
-0+ +&rk817 { + regulators { + bootph-pre-ram; + }; +}; + +&sdhci { + cap-mmc-highspeed; +};
Why is this not upstreamed to the Linux kernel DTS?
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi line 41
Quoted 8 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +8
-0+ +&sdmmc_pwren_l { + bootph-pre-ram; +}; + +&vcc3v3_sd { + bootph-pre-ram; +};
Don't you need vccio_sd as well since it's the vin-supply of vcc3v3_sd? (and also used as vqmmc-supply for sdmmc0
Quoted 49 lines
arch/arm/mach-rockchip/rk3568/Kconfig +7
-0@@ -8,6 +8,12 @@ config TARGET_EVB_RK3568 help RK3568 EVB is a evaluation board for Rockchp RK3568. +config TARGET_ANBERNIC_RG_DS_RK3568 + bool "Anbernic RG DS" + help + Anbernic RG DS gaming device with Rockchip RK3568 and dual + displays. + config TARGET_ANBERNIC_RGXX3_RK3566 bool "Anbernic RGXX3" help@@ -71,6 +77,7 @@ config SYS_SOC default "rk3568" source "board/rockchip/evb_rk3568/Kconfig" +source "board/anbernic/rg-ds/Kconfig" source "board/anbernic/rgxx3_rk3566/Kconfig" source "board/hardkernel/odroid_m1/Kconfig" source "board/hardkernel/odroid_m1s/Kconfig"board/anbernic/rg-ds/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_RG_DS_RK3568 + +config SYS_BOARD + default "rg-ds-rk3568" + +config SYS_VENDOR + default "anbernic" + +config SYS_CONFIG_NAME + default "rg-ds-rk3568" + +endifboard/anbernic/rg-ds/MAINTAINERS new file +0
-0
board/anbernic/rg-ds/MAINTAINERS line 5
Quoted 5 lines
board/anbernic/rg-ds/MAINTAINERS new file +5
-0@@ -0,0 +1,7 @@ +ANBERNIC-RG-DS-RK3568 +M: Chris Morgan <[email protected]> +S: Maintained +F: arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi +F: board/anbernic/rg-ds
Should we have rk3568 mentioned here maybe? Not a blocker though.
board/anbernic/rg-ds/MAINTAINERS line 7
Quoted 2 lines
board/anbernic/rg-ds/MAINTAINERS new file +2
-0+F: configs/anbernic-rg-ds_defconfig +F: include/configs/anbernic-rg-ds.h
Both defconfig and include files do not match here.
Quoted 11 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +5
-0@@ -0,0 +1,76 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_GPIO=y
configs/anbernic-rg-ds-rk3568_defconfig line 15
Quoted 10 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +10
-0+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-anbernic-rg-ds" +CONFIG_ROCKCHIP_RK3568=y +CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_ANBERNIC_RG_DS_RK3568=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART_BASE=0xFE660000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +# CONFIG_EFI_LOADER is not set
Any reason for explicitly disabling EFI support? (aside from other anbernic devices disabling it as well?) I believe some distros depend on that for booting up?
configs/anbernic-rg-ds-rk3568_defconfig line 20
Quoted 5 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +5
-0+CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y
Is this really used? I'm thinking we should probably stop using this for new boards if possible?
configs/anbernic-rg-ds-rk3568_defconfig line 23
Quoted 3 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +3
-0+CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-anbernic-rg-ds.dtb" +CONFIG_DISABLE_CONSOLE=y
Why no console? This will make debugging harder no?
Quoted 9 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +9
-0+# CONFIG_CONSOLE_MUX is not set +CONFIG_BOARD_TYPES=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_RNG_SEED=y +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_POWER=y +CONFIG_SPL_ATF=y
configs/anbernic-rg-ds-rk3568_defconfig line 42
Quoted 10 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +10
-0+CONFIG_CMD_PWM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_CLS is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_LIST="rockchip/rk3568-anbernic-rg-ds" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
Why remove clock-names?
Cheers,
Quentin
Quoted 24 lines · Quentin Schulz
Hi Chris,
Quoted 14 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add support for the Anbernic RG-DS dual-screen handheld gaming device.
Signed-off-by Chris Morgan <[email protected]>--- .../arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi | 41 ++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 7 ++ board/anbernic/rg-ds/Kconfig | 12 +++ board/anbernic/rg-ds/MAINTAINERS | 7 ++ configs/anbernic-rg-ds-rk3568_defconfig | 76 +++++++++++++++++++ include/configs/anbernic-rg-ds-rk3568.h | 12 +++ 6 files changed, 155 insertions(+)Quoted 6 lines
create mode 100644
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsicreate mode 100644 board/anbernic/rg-ds/Kconfig
create mode 100644 board/anbernic/rg-ds/MAINTAINERS create mode 100644 configs/anbernic-rg-ds-rk3568_defconfig create mode 100644include/configs/anbernic-rg-ds-rk3568.h
Quoted 1 line
Please add an entry to
doc/board/rockchip/rockchip.rst.
Will do.
Quoted 34 lines
Quoted 34 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +27
-0@@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk356x-u-boot.dtsi" + +&gpio0 { + bootph-pre-ram; +}; + +&i2c0 { + bootph-pre-ram; +}; + +&i2c0_xfer { + bootph-pre-ram; +}; + +&i2s1m0_mclk { + bootph-pre-ram; +}; + +&pmic_int_l { + bootph-pre-ram; +}; + +&rk817 { + regulators { + bootph-pre-ram;
Quoted 9 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi line 33
Quoted 6 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +6
-0+ }; +}; + +&sdhci { + cap-mmc-highspeed; +};Why is this not upstreamed to the Linux kernel DTS?
I think early in testing I copied this from another board, but it turns out after testing this isn't needed so I'll remove it.
Quoted 11 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi line 41
Quoted 8 lines
arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi new file +8
-0+ +&sdmmc_pwren_l { + bootph-pre-ram; +}; + +&vcc3v3_sd { + bootph-pre-ram; +};Don't you need
vccio_sdas well since it's the vin-supply ofvcc3v3_sd? (and also used as vqmmc-supply for sdmmc0
I will add it. I believe the regulator is programmed by OTP to always be on during boot, but it couldn't hurt to be explicit.
Quoted 47 lines
Quoted 47 lines
arch/arm/mach-rockchip/rk3568/Kconfig +7
-0@@ -8,6 +8,12 @@ config TARGET_EVB_RK3568 help RK3568 EVB is a evaluation board for Rockchp RK3568. +config TARGET_ANBERNIC_RG_DS_RK3568 + bool "Anbernic RG DS" + help + Anbernic RG DS gaming device with Rockchip RK3568 and dual + displays. + config TARGET_ANBERNIC_RGXX3_RK3566 bool "Anbernic RGXX3" help@@ -71,6 +77,7 @@ config SYS_SOC default "rk3568" source "board/rockchip/evb_rk3568/Kconfig" +source "board/anbernic/rg-ds/Kconfig" source "board/anbernic/rgxx3_rk3566/Kconfig" source "board/hardkernel/odroid_m1/Kconfig" source "board/hardkernel/odroid_m1s/Kconfig"board/anbernic/rg-ds/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_RG_DS_RK3568 + +config SYS_BOARD + default "rg-ds-rk3568" + +config SYS_VENDOR + default "anbernic" + +config SYS_CONFIG_NAME + default "rg-ds-rk3568" + +endifboard/anbernic/rg-ds/MAINTAINERS new file +0
-0
Quoted 8 lines
board/anbernic/rg-ds/MAINTAINERS line 5
Quoted 6 lines
board/anbernic/rg-ds/MAINTAINERS new file +5
-0@@ -0,0 +1,7 @@ +ANBERNIC-RG-DS-RK3568 +M: Chris Morgan <[email protected]> +S: Maintained +F: arch/arm/dts/rk3568-anbernic-rg-ds-u-boot.dtsi +F: board/anbernic/rg-dsShould we have rk3568 mentioned here maybe? Not a blocker though.
I'll add it.
Quoted 6 lines
board/anbernic/rg-ds/MAINTAINERS line 7
Quoted 3 lines
board/anbernic/rg-ds/MAINTAINERS new file +2
-0+F: configs/anbernic-rg-ds_defconfig +F: include/configs/anbernic-rg-ds.hBoth defconfig and include files do not match here.
Sorry, will fix.
Quoted 17 lines
Quoted 17 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +11
-0@@ -0,0 +1,76 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-anbernic-rg-ds" +CONFIG_ROCKCHIP_RK3568=y +CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_ANBERNIC_RG_DS_RK3568=y +CONFIG_SYS_LOAD_ADDR=0xc00800
Quoted 8 lines
configs/anbernic-rg-ds-rk3568_defconfig line 15
Quoted 4 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +4
-0+CONFIG_DEBUG_UART_BASE=0xFE660000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +# CONFIG_EFI_LOADER is not setAny reason for explicitly disabling EFI support? (aside from other anbernic devices disabling it as well?) I believe some distros depend on that for booting up?
I don't use it, but I shouldn't explicitly disable it. I'll remove that.
Quoted 9 lines
configs/anbernic-rg-ds-rk3568_defconfig line 20
Quoted 6 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +5
-0+CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=yIs this really used? I'm thinking we should probably stop using this for new boards if possible?
I don't use it, I just copied it from my other Rockchip boards. I'll remove it.
Quoted 6 lines
configs/anbernic-rg-ds-rk3568_defconfig line 23
Quoted 4 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +3
-0+CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-anbernic-rg-ds.dtb" +CONFIG_DISABLE_CONSOLE=yWhy no console? This will make debugging harder no?
I belive this was a vestige from something I copied, so I'll remove that.
Quoted 14 lines
Quoted 14 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +13
-0+# CONFIG_CONSOLE_MUX is not set +CONFIG_BOARD_TYPES=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_RNG_SEED=y +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_POWER=y +CONFIG_SPL_ATF=y +CONFIG_CMD_PWM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set
Quoted 8 lines
configs/anbernic-rg-ds-rk3568_defconfig line 42
Quoted 6 lines
configs/anbernic-rg-ds-rk3568_defconfig new file +6
-0+# CONFIG_CMD_CLS is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_LIST="rockchip/rk3568-anbernic-rg-ds" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"Why remove clock-names?
For the RK817 PMIC it has clocks but they are only needed for the audio codec. Based on observation when probing the PMIC if the clocks are defined but cannot be probed then probing the PMIC also fails. Since the clocks are really only used for the audio codec, we don't need them here.
Quoted 3 lines
Cheers,
Quentin
I'll make all the changes you suggest, except for the clock-names one which has an explicit reason. Thank you for your review.
Chris