ALSA: wavefront: add suspend and resume support
PATCH 1/1 ALSA: wavefront: add suspend and resume support
The WaveFront driver still lacks support for suspend and resume in both the ISA and PnP driver tables.
Wire the driver into ALSA PM by storing the WSS codec pointer in the card private data and adding shared suspend/resume callbacks. Resume cannot simply rerun snd_wavefront_start(), because with the default fx_raw=1 setting that would reset the synth on every resume and discard uploaded WaveFront RAM contents.
Cache wavefront.os for PM, probe the ICS2115 after resume and only run the full reset/bootstrap path when the board comes back raw. When the firmware is still running, refresh the software slot bookkeeping and restore the MIDI routing state without forcing a synth reset.
Also quiesce and restart the WaveFront MIDI output timer across suspend and resume so active rawmidi output does not race the PM transition.
This restores the card to a usable baseline after resume while preserving uploaded samples and programs when the hardware state survives suspend. If the board resumes raw, userspace still needs to reload custom synth contents.
--- include/sound/snd_wavefront.h | 7 +++ sound/isa/wavefront/wavefront.c | 61 +++++++++++++++++++++- sound/isa/wavefront/wavefront_midi.c | 47 ++++++++++++++++- sound/isa/wavefront/wavefront_synth.c | 96 +++++++++++++++++++++++++++++++++++ 4 files changed, 208 insertions(+), 3 deletions(-)
include/sound/snd_wavefront.h +7 -0
@@ -12,6 +12,7 @@struct _snd_wavefront_midi ;struct _snd_wavefront_card ;struct _snd_wavefront ; +struct snd_wss ;typedef struct _snd_wavefront_midi snd_wavefront_midi_t ;typedef struct _snd_wavefront_card snd_wavefront_card_t ;
@@ -46,6 +47,8 @@ extern void snd_wavefront_midi_enable_virtual (snd_wavefront_card_t *);extern void snd_wavefront_midi_disable_virtual (snd_wavefront_card_t *);extern void snd_wavefront_midi_interrupt (snd_wavefront_card_t *);extern int snd_wavefront_midi_start (snd_wavefront_card_t *); +void snd_wavefront_midi_suspend (snd_wavefront_card_t *card); +void snd_wavefront_midi_resume (snd_wavefront_card_t *card);struct _snd_wavefront {unsigned long irq;/* "you were one, one of the few ..." */
@@ -93,6 +96,7 @@ struct _snd_wavefront {int samples_used;/* how many */ char interrupts_are_midi;/* h/w MPU interrupts enabled ? */ char rom_samples_rdonly;/* can we write on ROM samples */ +char midi_in_to_synth;/* route external MIDI to synth */ spinlock_t irq_lock;wait_queue_head_t interrupt_sleeper;snd_wavefront_midi_t midi;/* ICS2115 MIDI interface */
@@ -101,6 +105,7 @@ struct _snd_wavefront {struct _snd_wavefront_card {snd_wavefront_t wavefront; +struct snd_wss *chip;#ifdef CONFIG_PNP struct pnp_dev *wss;struct pnp_dev *ctrl;
@@ -110,8 +115,10 @@ struct _snd_wavefront_card { };extern void snd_wavefront_internal_interrupt (snd_wavefront_card_t *card); +void snd_wavefront_cache_firmware (snd_wavefront_t *dev);extern int snd_wavefront_start (snd_wavefront_t *dev);extern int snd_wavefront_detect (snd_wavefront_card_t *card); +int snd_wavefront_resume_synth (snd_wavefront_card_t *card);extern int snd_wavefront_cmd (snd_wavefront_t *,int ,unsigned char *,unsigned char *);
sound/isa/wavefront/wavefront.c +59 -2
95 lines not on this page · raw message
sound/isa/wavefront/wavefront_midi.c +46 -1
68 lines not on this page · raw message
sound/isa/wavefront/wavefront_synth.c +96 -0
114 lines not on this page · raw message
---
base-commit: 876c495d412ef67bd4d0bdc4b74b0bd3d9f4e890
change-id: 20260427-wavefront-pm-53a804c497ee
Best regards,
Signature · 1 line
Cássio Gabriel <[email protected]>
Takashi Iwai
AppliedQuoted 18 lines · Cássio Gabriel
The WaveFront driver still lacks support for suspend and resume in both the ISA and PnP driver tables.
Wire the driver into ALSA PM by storing the WSS codec pointer in the card private data and adding shared suspend/resume callbacks. Resume cannot simply rerun
snd_wavefront_start(), because with the default fx_raw=1 setting that would reset the synth on every resume and discard uploaded WaveFront RAM contents.Cache wavefront.os for PM, probe the ICS2115 after resume and only run the full reset/bootstrap path when the board comes back raw. When the firmware is still running, refresh the software slot bookkeeping and restore the MIDI routing state without forcing a synth reset.
Also quiesce and restart the WaveFront MIDI output timer across suspend and resume so active rawmidi output does not race the PM transition.
Quoted 6 lines
This restores the card to a usable baseline after resume while preserving uploaded samples and programs when the hardware state survives suspend. If the board resumes raw, userspace still needs to reload custom synth contents.
Signed-off-by Cássio Gabriel <[email protected]>
Applied to for-next branch now. Thanks.
Takashi